Commit 992caacf authored by Matt LaPlante's avatar Matt LaPlante Committed by Adrian Bunk

Fix typos in Documentation/: 'N'-'P'

This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letters 'N'-'P'.
Signed-off-by: default avatarMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 2fe0ae78
...@@ -38,7 +38,7 @@ MTD ...@@ -38,7 +38,7 @@ MTD
--- ---
The NAND and NOR support has been merged from the linux-mtd project. The NAND and NOR support has been merged from the linux-mtd project.
Any prolbems, see http://www.linux-mtd.infradead.org/ for more Any problems, see http://www.linux-mtd.infradead.org/ for more
information or up-to-date versions of linux-mtd. information or up-to-date versions of linux-mtd.
......
...@@ -99,8 +99,8 @@ contrast, many write requests may be dispatched to the disk controller ...@@ -99,8 +99,8 @@ contrast, many write requests may be dispatched to the disk controller
at a time during a write batch. It is this characteristic that can make at a time during a write batch. It is this characteristic that can make
the anticipatory scheduler perform anomalously with controllers supporting the anticipatory scheduler perform anomalously with controllers supporting
TCQ, or with hardware striped RAID devices. Setting the antic_expire TCQ, or with hardware striped RAID devices. Setting the antic_expire
queue paramter (see below) to zero disables this behavior, and the anticipatory queue parameter (see below) to zero disables this behavior, and the
scheduler behaves essentially like the deadline scheduler. anticipatory scheduler behaves essentially like the deadline scheduler.
When read anticipation is enabled (antic_expire is not zero), reads When read anticipation is enabled (antic_expire is not zero), reads
are dispatched to the disk controller one at a time. are dispatched to the disk controller one at a time.
......
...@@ -42,7 +42,7 @@ iii. Devices which have queue depth of 1. This is a degenerate case ...@@ -42,7 +42,7 @@ iii. Devices which have queue depth of 1. This is a degenerate case
of ii. Just keeping issue order suffices. Ancient SCSI of ii. Just keeping issue order suffices. Ancient SCSI
controllers/drives and IDE drives are in this category. controllers/drives and IDE drives are in this category.
2. Forced flushing to physcial medium 2. Forced flushing to physical medium
Again, if you're not gonna do synchronization with disk drives (dang, Again, if you're not gonna do synchronization with disk drives (dang,
it sounds even more appealing now!), the reason you use I/O barriers it sounds even more appealing now!), the reason you use I/O barriers
......
...@@ -137,11 +137,11 @@ have to be made in a row before the CPU frequency is actually lower. ...@@ -137,11 +137,11 @@ have to be made in a row before the CPU frequency is actually lower.
If set to '1' then the frequency decreases as quickly as it increases, If set to '1' then the frequency decreases as quickly as it increases,
if set to '2' it decreases at half the rate of the increase. if set to '2' it decreases at half the rate of the increase.
ignore_nice_load: this parameter takes a value of '0' or '1', when set ignore_nice_load: this parameter takes a value of '0' or '1'. When
to '0' (its default) then all processes are counted towards towards the set to '0' (its default), all processes are counted towards the
'cpu utilisation' value. When set to '1' then processes that are 'cpu utilisation' value. When set to '1', the processes that are
run with a 'nice' value will not count (and thus be ignored) in the run with a 'nice' value will not count (and thus be ignored) in the
overal usage calculation. This is useful if you are running a CPU overall usage calculation. This is useful if you are running a CPU
intensive calculation on your laptop that you do not care how long it intensive calculation on your laptop that you do not care how long it
takes to complete as you can 'nice' it and prevent it from taking part takes to complete as you can 'nice' it and prevent it from taking part
in the deciding process of whether to increase your CPU frequency. in the deciding process of whether to increase your CPU frequency.
......
...@@ -52,7 +52,7 @@ echo packet > /sys/devices/platform/dell_rbu/image_type ...@@ -52,7 +52,7 @@ echo packet > /sys/devices/platform/dell_rbu/image_type
In packet update mode the packet size has to be given before any packets can In packet update mode the packet size has to be given before any packets can
be downloaded. It is done as below be downloaded. It is done as below
echo XXXX > /sys/devices/platform/dell_rbu/packet_size echo XXXX > /sys/devices/platform/dell_rbu/packet_size
In the packet update mechanism, the user neesd to create a new file having In the packet update mechanism, the user needs to create a new file having
packets of data arranged back to back. It can be done as follows packets of data arranged back to back. It can be done as follows
The user creates packets header, gets the chunk of the BIOS image and The user creates packets header, gets the chunk of the BIOS image and
places it next to the packetheader; now, the packetheader + BIOS image chunk places it next to the packetheader; now, the packetheader + BIOS image chunk
...@@ -93,8 +93,8 @@ read back the image downloaded. ...@@ -93,8 +93,8 @@ read back the image downloaded.
NOTE: NOTE:
This driver requires a patch for firmware_class.c which has the modified This driver requires a patch for firmware_class.c which has the modified
request_firmware_nowait function. request_firmware_nowait function.
Also after updating the BIOS image an user mdoe application neeeds to execute Also after updating the BIOS image a user mode application needs to execute
code which message the BIOS update request to the BIOS. So on the next reboot code which sends the BIOS update request to the BIOS. So on the next reboot
the BIOS knows about the new image downloaded and it updates it self. the BIOS knows about the new image downloaded and it updates itself.
Also don't unload the rbu drive if the image has to be updated. Also don't unload the rbu driver if the image has to be updated.
...@@ -2005,7 +2005,7 @@ Your cooperation is appreciated. ...@@ -2005,7 +2005,7 @@ Your cooperation is appreciated.
116 char Advanced Linux Sound Driver (ALSA) 116 char Advanced Linux Sound Driver (ALSA)
116 block MicroMemory battery backed RAM adapter (NVRAM) 116 block MicroMemory battery backed RAM adapter (NVRAM)
Supports 16 boards, 15 paritions each. Supports 16 boards, 15 partitions each.
Requested by neilb at cse.unsw.edu.au. Requested by neilb at cse.unsw.edu.au.
0 = /dev/umem/d0 Whole of first board 0 = /dev/umem/d0 Whole of first board
...@@ -3094,7 +3094,7 @@ Your cooperation is appreciated. ...@@ -3094,7 +3094,7 @@ Your cooperation is appreciated.
This major is reserved to assist the expansion to a This major is reserved to assist the expansion to a
larger number space. No device nodes with this major larger number space. No device nodes with this major
should ever be created on the filesystem. should ever be created on the filesystem.
(This is probaly not true anymore, but I'll leave it (This is probably not true anymore, but I'll leave it
for now /Torben) for now /Torben)
---LARGE MAJORS!!!!!--- ---LARGE MAJORS!!!!!---
......
...@@ -45,9 +45,9 @@ Assumptions and Introduction ...@@ -45,9 +45,9 @@ Assumptions and Introduction
by circuitry on the card and is often presented uncompressed. by circuitry on the card and is often presented uncompressed.
For a PAL TV signal encoded at a resolution of 768x576 24-bit For a PAL TV signal encoded at a resolution of 768x576 24-bit
color pixels over 25 frames per second - a fair amount of data color pixels over 25 frames per second - a fair amount of data
is generated and must be proceesed by the PC before it can be is generated and must be processed by the PC before it can be
displayed on the video monitor screen. Some Analogue TV cards displayed on the video monitor screen. Some Analogue TV cards
for PC's have onboard MPEG2 encoders which permit the raw for PCs have onboard MPEG2 encoders which permit the raw
digital data stream to be presented to the PC in an encoded digital data stream to be presented to the PC in an encoded
and compressed form - similar to the form that is used in and compressed form - similar to the form that is used in
Digital TV. Digital TV.
......
...@@ -5,7 +5,7 @@ Some very frequently asked questions about linuxtv-dvb ...@@ -5,7 +5,7 @@ Some very frequently asked questions about linuxtv-dvb
It's not a bug, it's a feature. Because the frontends have It's not a bug, it's a feature. Because the frontends have
significant power requirements (and hence get very hot), they significant power requirements (and hence get very hot), they
are powered down if they are unused (i.e. if the frontend device are powered down if they are unused (i.e. if the frontend device
is closed). The dvb-core.o module paramter "dvb_shutdown_timeout" is closed). The dvb-core.o module parameter "dvb_shutdown_timeout"
allow you to change the timeout (default 5 seconds). Setting the allow you to change the timeout (default 5 seconds). Setting the
timeout to 0 disables the timeout feature. timeout to 0 disables the timeout feature.
......
...@@ -84,7 +84,7 @@ struct eisa_driver { ...@@ -84,7 +84,7 @@ struct eisa_driver {
id_table : an array of NULL terminated EISA id strings, id_table : an array of NULL terminated EISA id strings,
followed by an empty string. Each string can followed by an empty string. Each string can
optionnaly be paired with a driver-dependant value optionally be paired with a driver-dependant value
(driver_data). (driver_data).
driver : a generic driver, such as described in driver : a generic driver, such as described in
......
...@@ -72,8 +72,8 @@ Module Usage ...@@ -72,8 +72,8 @@ Module Usage
Kernel/Modules Options Kernel/Modules Options
You can pass some otions to sstfb module, and via the kernel command You can pass some options to the sstfb module, and via the kernel
line when the driver is compiled in : command line when the driver is compiled in:
for module : insmod sstfb.o option1=value1 option2=value2 ... for module : insmod sstfb.o option1=value1 option2=value2 ...
in kernel : video=sstfb:option1,option2:value2,option3 ... in kernel : video=sstfb:option1,option2:value2,option3 ...
......
...@@ -22,7 +22,7 @@ He has been working on the code since Aug 13, 2001. See the changelog for ...@@ -22,7 +22,7 @@ He has been working on the code since Aug 13, 2001. See the changelog for
details. details.
Original Author: Makoto Kato <m_kato@ga2.so-net.ne.jp> Original Author: Makoto Kato <m_kato@ga2.so-net.ne.jp>
His orriginal code can still be found at: His original code can still be found at:
<http://hp.vector.co.jp/authors/VA008030/bfs/> <http://hp.vector.co.jp/authors/VA008030/bfs/>
Does anyone know of a more current email address for Makoto? He doesn't Does anyone know of a more current email address for Makoto? He doesn't
respond to the address given above... respond to the address given above...
...@@ -39,7 +39,7 @@ Which is it, BFS or BEFS? ...@@ -39,7 +39,7 @@ Which is it, BFS or BEFS?
================ ================
Be, Inc said, "BeOS Filesystem is officially called BFS, not BeFS". Be, Inc said, "BeOS Filesystem is officially called BFS, not BeFS".
But Unixware Boot Filesystem is called bfs, too. And they are already in But Unixware Boot Filesystem is called bfs, too. And they are already in
the kernel. Because of this nameing conflict, on Linux the BeOS the kernel. Because of this naming conflict, on Linux the BeOS
filesystem is called befs. filesystem is called befs.
HOW TO INSTALL HOW TO INSTALL
......
...@@ -205,7 +205,7 @@ Reserved Space ...@@ -205,7 +205,7 @@ Reserved Space
In ext2, there is a mechanism for reserving a certain number of blocks In ext2, there is a mechanism for reserving a certain number of blocks
for a particular user (normally the super-user). This is intended to for a particular user (normally the super-user). This is intended to
allow for the system to continue functioning even if non-priveleged users allow for the system to continue functioning even if non-privileged users
fill up all the space available to them (this is independent of filesystem fill up all the space available to them (this is independent of filesystem
quotas). It also keeps the filesystem from filling up entirely which quotas). It also keeps the filesystem from filling up entirely which
helps combat fragmentation. helps combat fragmentation.
......
...@@ -359,7 +359,7 @@ ERRORS ...@@ -359,7 +359,7 @@ ERRORS
EFAULT npc is not a valid pointer or status is neither NULL nor a valid EFAULT npc is not a valid pointer or status is neither NULL nor a valid
pointer. pointer.
EINTR A signal occured while spu_run was in progress. The npc value EINTR A signal occurred while spu_run was in progress. The npc value
has been updated to the new program counter value if necessary. has been updated to the new program counter value if necessary.
EINVAL fd is not a file descriptor returned from spu_create(2). EINVAL fd is not a file descriptor returned from spu_create(2).
......
...@@ -27,7 +27,7 @@ several reasons why such integration is hard/impossible: ...@@ -27,7 +27,7 @@ several reasons why such integration is hard/impossible:
high-res timers. high-res timers.
- the unpredictable [O(N)] overhead of cascading leads to delays which - the unpredictable [O(N)] overhead of cascading leads to delays which
necessiate a more complex handling of high resolution timers, which necessitate a more complex handling of high resolution timers, which
in turn decreases robustness. Such a design still led to rather large in turn decreases robustness. Such a design still led to rather large
timing inaccuracies. Cascading is a fundamental property of the timer timing inaccuracies. Cascading is a fundamental property of the timer
wheel concept, it cannot be 'designed out' without unevitably wheel concept, it cannot be 'designed out' without unevitably
......
...@@ -465,8 +465,8 @@ more parallel ports. ...@@ -465,8 +465,8 @@ more parallel ports.
There are two options specific to PSX driver portion. gamecon.psx_delay sets There are two options specific to PSX driver portion. gamecon.psx_delay sets
the command delay when talking to the controllers. The default of 25 should the command delay when talking to the controllers. The default of 25 should
work but you can try lowering it for better performace. If your pads don't work but you can try lowering it for better performance. If your pads don't
respond try raising it untill they work. Setting the type to 8 allows the respond try raising it until they work. Setting the type to 8 allows the
driver to be used with Dance Dance Revolution or similar games. Arrow keys are driver to be used with Dance Dance Revolution or similar games. Arrow keys are
registered as key presses instead of X and Y axes. registered as key presses instead of X and Y axes.
......
...@@ -170,7 +170,7 @@ Proof of 100% correctness: ...@@ -170,7 +170,7 @@ Proof of 100% correctness:
The validator achieves perfect, mathematical 'closure' (proof of locking The validator achieves perfect, mathematical 'closure' (proof of locking
correctness) in the sense that for every simple, standalone single-task correctness) in the sense that for every simple, standalone single-task
locking sequence that occured at least once during the lifetime of the locking sequence that occurred at least once during the lifetime of the
kernel, the validator proves it with a 100% certainty that no kernel, the validator proves it with a 100% certainty that no
combination and timing of these locking sequences can cause any class of combination and timing of these locking sequences can cause any class of
lock related deadlock. [*] lock related deadlock. [*]
......
...@@ -330,7 +330,7 @@ Each directory contains: ...@@ -330,7 +330,7 @@ Each directory contains:
This gives the role that the device has in the array. It will This gives the role that the device has in the array. It will
either be 'none' if the device is not active in the array either be 'none' if the device is not active in the array
(i.e. is a spare or has failed) or an integer less than the (i.e. is a spare or has failed) or an integer less than the
'raid_disks' number for the array indicating which possition 'raid_disks' number for the array indicating which position
it currently fills. This can only be set while assembling an it currently fills. This can only be set while assembling an
array. A device for which this is set is assumed to be working. array. A device for which this is set is assumed to be working.
...@@ -353,7 +353,7 @@ in the array. These are named ...@@ -353,7 +353,7 @@ in the array. These are named
rdNN rdNN
where 'NN' is the possition in the array, starting from 0. where 'NN' is the position in the array, starting from 0.
So for a 3 drive array there will be rd0, rd1, rd2. So for a 3 drive array there will be rd0, rd1, rd2.
These are symbolic links to the appropriate 'dev-XXX' entry. These are symbolic links to the appropriate 'dev-XXX' entry.
Thus, for example, Thus, for example,
......
...@@ -79,8 +79,8 @@ Rate Estimator: ...@@ -79,8 +79,8 @@ Rate Estimator:
0) Prepare an estimator attribute. Most likely this would be in user 0) Prepare an estimator attribute. Most likely this would be in user
space. The value of this TLV should contain a tc_estimator structure. space. The value of this TLV should contain a tc_estimator structure.
As usual, such a TLV nees to be 32 bit aligned and therefore the As usual, such a TLV needs to be 32 bit aligned and therefore the
length needs to be appropriately set etc. The estimator interval length needs to be appropriately set, etc. The estimator interval
and ewma log need to be converted to the appropriate values. and ewma log need to be converted to the appropriate values.
tc_estimator.c::tc_setup_estimator() is advisable to be used as the tc_estimator.c::tc_setup_estimator() is advisable to be used as the
conversion routine. It does a few clever things. It takes a time conversion routine. It does a few clever things. It takes a time
......
...@@ -278,7 +278,7 @@ an i386 kernel's memory size is limited to 1GiB. ...@@ -278,7 +278,7 @@ an i386 kernel's memory size is limited to 1GiB.
All memory allocations are not freed until the socket is closed. The memory All memory allocations are not freed until the socket is closed. The memory
allocations are done with GFP_KERNEL priority, this basically means that allocations are done with GFP_KERNEL priority, this basically means that
the allocation can wait and swap other process' memory in order to allocate the allocation can wait and swap other process' memory in order to allocate
the nececessary memory, so normally limits can be reached. the necessary memory, so normally limits can be reached.
Other constraints Other constraints
------------------- -------------------
......
...@@ -180,7 +180,7 @@ To set the driver parameters in this file, proceed as follows: ...@@ -180,7 +180,7 @@ To set the driver parameters in this file, proceed as follows:
1. Insert a line of the form : 1. Insert a line of the form :
options sk98lin ... options sk98lin ...
For "...", the same syntax is required as described for the command For "...", the same syntax is required as described for the command
line paramaters of modprobe below. line parameters of modprobe below.
2. To activate the new parameters, either reboot your computer 2. To activate the new parameters, either reboot your computer
or or
unload and reload the driver. unload and reload the driver.
...@@ -364,9 +364,9 @@ Parameter: IntsPerSec ...@@ -364,9 +364,9 @@ Parameter: IntsPerSec
Values: 30...40000 (interrupts per second) Values: 30...40000 (interrupts per second)
Default: 2000 Default: 2000
This parameter is only used, if either static or dynamic interrupt moderation This parameter is only used if either static or dynamic interrupt moderation
is used on a network adapter card. Using this paramter if no moderation is is used on a network adapter card. Using this parameter if no moderation is
applied, will lead to no action performed. applied will lead to no action performed.
This parameter determines the length of any interrupt moderation interval. This parameter determines the length of any interrupt moderation interval.
Assuming that static interrupt moderation is to be used, an 'IntsPerSec' Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
......
...@@ -359,13 +359,13 @@ steps you should take: ...@@ -359,13 +359,13 @@ steps you should take:
Eliminate some variables: try different cards, different Eliminate some variables: try different cards, different
computers, different cables, different ports on the switch/hub, computers, different cables, different ports on the switch/hub,
different versions of the kernel or ofthe driver, etc. different versions of the kernel or of the driver, etc.
- OK, it's a driver problem. - OK, it's a driver problem.
You need to generate a report. Typically this is an email to the You need to generate a report. Typically this is an email to the
maintainer and/or linux-net@vger.kernel.org. The maintainer's maintainer and/or linux-net@vger.kernel.org. The maintainer's
email address will be inthe driver source or in the MAINTAINERS file. email address will be in the driver source or in the MAINTAINERS file.
- The contents of your report will vary a lot depending upon the - The contents of your report will vary a lot depending upon the
problem. If it's a kernel crash then you should refer to the problem. If it's a kernel crash then you should refer to the
......
...@@ -214,7 +214,7 @@ PRODUCT COMPONENTS AND RELATED FILES ...@@ -214,7 +214,7 @@ PRODUCT COMPONENTS AND RELATED FILES
/usr/local/wanrouter/patches/kdrivers: /usr/local/wanrouter/patches/kdrivers:
Sources of the latest WANPIPE device drivers. Sources of the latest WANPIPE device drivers.
These are used to UPGRADE the linux kernel to the newest These are used to UPGRADE the linux kernel to the newest
version if the kernel source has already been pathced with version if the kernel source has already been patched with
WANPIPE drivers. WANPIPE drivers.
/usr/local/wanrouter/samples: /usr/local/wanrouter/samples:
...@@ -438,7 +438,7 @@ beta1-2.1.5 Nov 15 2000 ...@@ -438,7 +438,7 @@ beta1-2.1.5 Nov 15 2000
2.2.X kernels only 2.2.X kernels only
o Secured the driver UDP debugging calls o Secured the driver UDP debugging calls
- All illegal netowrk debugging calls are reported to - All illegal network debugging calls are reported to
the log. the log.
- Defined a set of allowed commands, all other denied. - Defined a set of allowed commands, all other denied.
...@@ -451,7 +451,7 @@ beta1-2.1.5 Nov 15 2000 ...@@ -451,7 +451,7 @@ beta1-2.1.5 Nov 15 2000
o Keyboard Led Monitor/Debugger o Keyboard Led Monitor/Debugger
- A new utilty /usr/sbin/wpkbdmon uses keyboard leds - A new utilty /usr/sbin/wpkbdmon uses keyboard leds
to convey operatinal statistic information of the to convey operational statistic information of the
Sangoma WANPIPE cards. Sangoma WANPIPE cards.
NUM_LOCK = Line State (On=connected, Off=disconnected) NUM_LOCK = Line State (On=connected, Off=disconnected)
CAPS_LOCK = Tx data (On=transmitting, Off=no tx data) CAPS_LOCK = Tx data (On=transmitting, Off=no tx data)
...@@ -470,7 +470,7 @@ beta1-2.1.5 Nov 15 2000 ...@@ -470,7 +470,7 @@ beta1-2.1.5 Nov 15 2000
o Fixed the Frame Relay and Chdlc network interfaces so they are o Fixed the Frame Relay and Chdlc network interfaces so they are
compatible with libpcap libraries. Meaning, tcpdump, snort, compatible with libpcap libraries. Meaning, tcpdump, snort,
ethereal, and all other packet sniffers and debuggers work on ethereal, and all other packet sniffers and debuggers work on
all WANPIPE netowrk interfaces. all WANPIPE network interfaces.
- Set the network interface encoding type to ARPHRD_PPP. - Set the network interface encoding type to ARPHRD_PPP.
This tell the sniffers that data obtained from the This tell the sniffers that data obtained from the
network interface is in pure IP format. network interface is in pure IP format.
......
...@@ -91,7 +91,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are ...@@ -91,7 +91,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
still frozen when the device is being closed). still frozen when the device is being closed).
Currently it is assumed that the userland utilities reading/writing the Currently it is assumed that the userland utilities reading/writing the
snapshot image from/to the kernel will use a swap parition, called the resume snapshot image from/to the kernel will use a swap partition, called the resume
partition, as storage space. However, this is not really required, as they partition, as storage space. However, this is not really required, as they
can use, for example, a special (blank) suspend partition or a file on a partition can use, for example, a special (blank) suspend partition or a file on a partition
that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and mounted afterwards. that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and mounted afterwards.
......
...@@ -16,7 +16,7 @@ problem for S1 standby, because hardware should retain its state over ...@@ -16,7 +16,7 @@ problem for S1 standby, because hardware should retain its state over
that. that.
We either have to run video BIOS during early resume, or interpret it We either have to run video BIOS during early resume, or interpret it
using vbetool later, or maybe nothing is neccessary on particular using vbetool later, or maybe nothing is necessary on particular
system because video state is preserved. Unfortunately different system because video state is preserved. Unfortunately different
methods work on different systems, and no known method suits all of methods work on different systems, and no known method suits all of
them. them.
......
...@@ -630,12 +630,11 @@ like address space bits, you'll have to add a bus translator to the ...@@ -630,12 +630,11 @@ like address space bits, you'll have to add a bus translator to the
prom_parse.c file of the recent kernels for your bus type. prom_parse.c file of the recent kernels for your bus type.
The "reg" property only defines addresses and sizes (if #size-cells The "reg" property only defines addresses and sizes (if #size-cells
is is non-0) within a given bus. In order to translate addresses upward
non-0) within a given bus. In order to translate addresses upward
(that is into parent bus addresses, and possibly into cpu physical (that is into parent bus addresses, and possibly into cpu physical
addresses), all busses must contain a "ranges" property. If the addresses), all busses must contain a "ranges" property. If the
"ranges" property is missing at a given level, it's assumed that "ranges" property is missing at a given level, it's assumed that
translation isn't possible. The format of the "ranges" proprety for a translation isn't possible. The format of the "ranges" property for a
bus is a list of: bus is a list of:
bus address, parent bus address, size bus address, parent bus address, size
......
...@@ -366,8 +366,8 @@ Register Usage & Stackframes on Linux for s/390 & z/Architecture ...@@ -366,8 +366,8 @@ Register Usage & Stackframes on Linux for s/390 & z/Architecture
Overview: Overview:
--------- ---------
This is the code that gcc produces at the top & the bottom of This is the code that gcc produces at the top & the bottom of
each function, it usually is fairly consistent & similar from each function. It usually is fairly consistent & similar from
function to function & if you know its layout you can probalby function to function & if you know its layout you can probably
make some headway in finding the ultimate cause of a problem make some headway in finding the ultimate cause of a problem
after a crash without a source level debugger. after a crash without a source level debugger.
...@@ -1703,7 +1703,7 @@ concentrate on data processing. ...@@ -1703,7 +1703,7 @@ concentrate on data processing.
IOP's can use one or more links ( known as channel paths ) to talk to each IOP's can use one or more links ( known as channel paths ) to talk to each
IO device. It first checks for path availability & chooses an available one, IO device. It first checks for path availability & chooses an available one,
then starts ( & sometimes terminates IO ). then starts ( & sometimes terminates IO ).
There are two types of channel path ESCON & the Paralell IO interface. There are two types of channel path: ESCON & the Parallel IO interface.
IO devices are attached to control units, control units provide the IO devices are attached to control units, control units provide the
logic to interface the channel paths & channel path IO protocols to logic to interface the channel paths & channel path IO protocols to
...@@ -1742,11 +1742,11 @@ controllers or a control unit which connects to 1000 3270 terminals ). ...@@ -1742,11 +1742,11 @@ controllers or a control unit which connects to 1000 3270 terminals ).
The 390 IO systems come in 2 flavours the current 390 machines support both The 390 IO systems come in 2 flavours the current 390 machines support both
The Older 360 & 370 Interface,sometimes called the paralell I/O interface, The Older 360 & 370 Interface,sometimes called the Parallel I/O interface,
sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers
Interface (OEMI). Interface (OEMI).
This byte wide paralell channel path/bus has parity & data on the "Bus" cable This byte wide Parallel channel path/bus has parity & data on the "Bus" cable
& control lines on the "Tag" cable. These can operate in byte multiplex mode for & control lines on the "Tag" cable. These can operate in byte multiplex mode for
sharing between several slow devices or burst mode & monopolize the channel for the sharing between several slow devices or burst mode & monopolize the channel for the
whole burst. Upto 256 devices can be addressed on one of these cables. These cables are whole burst. Upto 256 devices can be addressed on one of these cables. These cables are
...@@ -1776,7 +1776,7 @@ Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console ) ...@@ -1776,7 +1776,7 @@ Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console )
DASD's direct access storage devices ( otherwise known as hard disks ). DASD's direct access storage devices ( otherwise known as hard disks ).
Tape Drives. Tape Drives.
CTC ( Channel to Channel Adapters ), CTC ( Channel to Channel Adapters ),
ESCON or Paralell Cables used as a very high speed serial link ESCON or Parallel Cables used as a very high speed serial link
between 2 machines. We use 2 cables under linux to do a bi-directional serial link. between 2 machines. We use 2 cables under linux to do a bi-directional serial link.
...@@ -1802,8 +1802,8 @@ OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001 ...@@ -1802,8 +1802,8 @@ OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001
OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002 OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002
OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003 OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003
If you have a guest with certain priviliges you may be able to see devices If you have a guest with certain privileges you may be able to see devices
which don't belong to you to avoid this do add the option V. which don't belong to you. To avoid this, add the option V.
e.g. e.g.
Q V OSA Q V OSA
......
...@@ -177,11 +177,11 @@ This routine returns the characteristics for the device specified. ...@@ -177,11 +177,11 @@ This routine returns the characteristics for the device specified.
The function is meant to be called with an irq handler in place; that is, The function is meant to be called with an irq handler in place; that is,
at earliest during set_online() processing. at earliest during set_online() processing.
While the request is procesed synchronously, the device interrupt While the request is processed synchronously, the device interrupt
handler is called for final ending status. In case of error situations the handler is called for final ending status. In case of error situations the
interrupt handler may recover appropriately. The device irq handler can interrupt handler may recover appropriately. The device irq handler can
recognize the corresponding interrupts by the interruption parameter be recognize the corresponding interrupts by the interruption parameter be
0x00524443.The ccw_device must not be locked prior to calling read_dev_chars(). 0x00524443. The ccw_device must not be locked prior to calling read_dev_chars().
The function may be called enabled or disabled. The function may be called enabled or disabled.
......
...@@ -61,9 +61,9 @@ Example: z990 crypto instruction for SHA1 algorithm is available ...@@ -61,9 +61,9 @@ Example: z990 crypto instruction for SHA1 algorithm is available
-> when the sha1 algorithm is requested through the crypto API -> when the sha1 algorithm is requested through the crypto API
(which has a module autoloader) the z990 module will be loaded. (which has a module autoloader) the z990 module will be loaded.
TBD: a userspace module probin mechanism TBD: a userspace module probing mechanism
something like 'probe sha1 sha1_z990 sha1' in modprobe.conf something like 'probe sha1 sha1_z990 sha1' in modprobe.conf
-> try module sha1_z990, if it fails to load load standard module sha1 -> try module sha1_z990, if it fails to load standard module sha1
the 'probe' statement is currently not supported in modprobe.conf the 'probe' statement is currently not supported in modprobe.conf
......
...@@ -84,7 +84,7 @@ It is also possible to deactivate the debug feature globally for every ...@@ -84,7 +84,7 @@ It is also possible to deactivate the debug feature globally for every
debug log. You can change the behavior using 2 sysctl parameters in debug log. You can change the behavior using 2 sysctl parameters in
/proc/sys/s390dbf: /proc/sys/s390dbf:
There are currently 2 possible triggers, which stop the debug feature There are currently 2 possible triggers, which stop the debug feature
globally. The first possbility is to use the "debug_active" sysctl. If globally. The first possibility is to use the "debug_active" sysctl. If
set to 1 the debug feature is running. If "debug_active" is set to 0 the set to 1 the debug feature is running. If "debug_active" is set to 0 the
debug feature is turned off. debug feature is turned off.
The second trigger which stops the debug feature is an kernel oops. The second trigger which stops the debug feature is an kernel oops.
......
...@@ -59,10 +59,10 @@ $ emacs Makefile ...@@ -59,10 +59,10 @@ $ emacs Makefile
... ...
$ make $ make
[5] Copy nsp_cs.o to suitable plase, like /lib/modules/<Kernel version>/pcmcia/ . [5] Copy nsp_cs.ko to suitable place, like /lib/modules/<Kernel version>/pcmcia/ .
[6] Add these lines to /etc/pcmcia/config . [6] Add these lines to /etc/pcmcia/config .
If you yse pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file. If you use pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
So, you don't need to edit file. Just copy to /etc/pcmcia/ . So, you don't need to edit file. Just copy to /etc/pcmcia/ .
------------------------------------- -------------------------------------
......
...@@ -94,7 +94,7 @@ The following information is available in this file: ...@@ -94,7 +94,7 @@ The following information is available in this file:
- Add support for scsi_report_device_reset() found in - Add support for scsi_report_device_reset() found in
2.5.X kernels. 2.5.X kernels.
- Add 7901B support. - Add 7901B support.
- Simplify handling of the packtized lun Rev A workaround. - Simplify handling of the packetized lun Rev A workaround.
- Correct and simplify handling of the ignore wide residue - Correct and simplify handling of the ignore wide residue
message. The previous code would fail to report a residual message. The previous code would fail to report a residual
if the transaction data length was even and we received if the transaction data length was even and we received
......
...@@ -20,7 +20,7 @@ Parameters ...@@ -20,7 +20,7 @@ Parameters
---------- ----------
The driver uses the settings from the EEPROM set in the SCSI BIOS The driver uses the settings from the EEPROM set in the SCSI BIOS
setup. If there is no EEPROM, the driver uses default values. setup. If there is no EEPROM, the driver uses default values.
Both can be overriden by command line parameters (module or kernel Both can be overridden by command line parameters (module or kernel
parameters). parameters).
The following parameters are available: The following parameters are available:
......
...@@ -1086,7 +1086,7 @@ ...@@ -1086,7 +1086,7 @@
Q: "Reset SCSI-devices at boottime" halts the system at boottime, why? Q: "Reset SCSI-devices at boottime" halts the system at boottime, why?
A: This is only tested with the IBM SCSI Adapter w/cache. It is not A: This is only tested with the IBM SCSI Adapter w/cache. It is not
yet prooved to run on other adapters, however you may be lucky. yet proven to run on other adapters, however you may be lucky.
In version 3.1d this has been hugely improved and should work better, In version 3.1d this has been hugely improved and should work better,
now. Normally you really won't need to activate this flag in the now. Normally you really won't need to activate this flag in the
kernel configuration, as all post 1989 SCSI-devices should accept kernel configuration, as all post 1989 SCSI-devices should accept
......
...@@ -631,7 +631,7 @@ string variable using 'insmod'. ...@@ -631,7 +631,7 @@ string variable using 'insmod'.
A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the
driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects
an optionnal list of integers separated with comma followed by an optional an optional list of integers separated with comma followed by an optional
list of comma-separated strings. Example of boot setup command under lilo list of comma-separated strings. Example of boot setup command under lilo
prompt: prompt:
...@@ -899,7 +899,7 @@ boot setup can be: ...@@ -899,7 +899,7 @@ boot setup can be:
ncr53c8xx=safe:y,mpar:y ncr53c8xx=safe:y,mpar:y
ncr53c8xx=safe:y ncr53c8xx=safe:y
My personnal system works flawlessly with the following equivalent setup: My personal system works flawlessly with the following equivalent setup:
ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\ ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
tags:32,sync:12,debug:0,burst:7,led:1,wide:1,settle:2,diff:0,irqm:0 tags:32,sync:12,debug:0,burst:7,led:1,wide:1,settle:2,diff:0,irqm:0
......
...@@ -31,7 +31,7 @@ changers. But it allows to handle nearly all possible cases. It knows ...@@ -31,7 +31,7 @@ changers. But it allows to handle nearly all possible cases. It knows
media transport - this one shuffles around the media, i.e. the media transport - this one shuffles around the media, i.e. the
transport arm. Also known as "picker". transport arm. Also known as "picker".
storage - a slot which can hold a media. storage - a slot which can hold a media.
import/export - the same as above, but is accessable from outside, import/export - the same as above, but is accessible from outside,
i.e. there the operator (you !) can use this to i.e. there the operator (you !) can use this to
fill in and remove media from the changer. fill in and remove media from the changer.
Sometimes named "mailslot". Sometimes named "mailslot".
......
...@@ -76,7 +76,7 @@ in alsa-lib. For example, you can play a WAV file with 6 channels like ...@@ -76,7 +76,7 @@ in alsa-lib. For example, you can play a WAV file with 6 channels like
% aplay -Dsurround51 sixchannels.wav % aplay -Dsurround51 sixchannels.wav
For programmin the 4/6 channel playback, you need to specify the PCM For programming the 4/6 channel playback, you need to specify the PCM
channels as you like and set the format S16LE. For example, for playback channels as you like and set the format S16LE. For example, for playback
with 4 channels, with 4 channels,
......
...@@ -25,8 +25,8 @@ the bits necessary to run your device. The most commonly ...@@ -25,8 +25,8 @@ the bits necessary to run your device. The most commonly
used members of this structure, and their typical usage, used members of this structure, and their typical usage,
will be detailed below. will be detailed below.
Here is a piece of skeleton code for perofming a device Here is a piece of skeleton code for performing a device
probe in an SBUS driverunder Linux: probe in an SBUS driver under Linux:
static int __devinit mydevice_probe_one(struct sbus_dev *sdev) static int __devinit mydevice_probe_one(struct sbus_dev *sdev)
{ {
......
...@@ -2031,7 +2031,7 @@ ...@@ -2031,7 +2031,7 @@
there are multiple COWs associated with a backing file, a -d merge of there are multiple COWs associated with a backing file, a -d merge of
one of them will invalidate all of the others. However, it is one of them will invalidate all of the others. However, it is
convenient if you're short of disk space, and it should also be convenient if you're short of disk space, and it should also be
noticably faster than a non-destructive merge. noticeably faster than a non-destructive merge.
......
...@@ -272,7 +272,7 @@ Digi AccelePort Driver ...@@ -272,7 +272,7 @@ Digi AccelePort Driver
work under SMP with the uhci driver. work under SMP with the uhci driver.
The driver is generally working, though we still have a few more ioctls The driver is generally working, though we still have a few more ioctls
to implement and final testing and debugging to do. The paralled port to implement and final testing and debugging to do. The parallel port
on the USB 2 is supported as a serial to parallel converter; in other on the USB 2 is supported as a serial to parallel converter; in other
words, it appears as another USB serial port on Linux, even though words, it appears as another USB serial port on Linux, even though
physically it is really a parallel port. The Digi Acceleport USB 8 physically it is really a parallel port. The Digi Acceleport USB 8
......
...@@ -280,7 +280,7 @@ Param[0] ...@@ -280,7 +280,7 @@ Param[0]
Param[1] Param[1]
Unknown, but leaving this to 0 seems to work best. Indications are that Unknown, but leaving this to 0 seems to work best. Indications are that
this might have to do with USB support, although passing anything but 0 this might have to do with USB support, although passing anything but 0
onl breaks things. only breaks things.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
......
...@@ -15,7 +15,7 @@ Index ...@@ -15,7 +15,7 @@ Index
5. Supported devices 5. Supported devices
6. Module dependencies 6. Module dependencies
7. Module loading 7. Module loading
8. Module paramaters 8. Module parameters
9. Contact information 9. Contact information
10. Credits 10. Credits
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment