ASoC: sdm845: Add support for Secondary MI2S interface

Add support to configure bit clock for secondary MI2S
TX interface.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/qcom/sdm845.c

@@ -19,6 +19,7 @@
 struct sdm845_snd_data {
 	struct snd_soc_card *card;
 	uint32_t pri_mi2s_clk_count;
+	uint32_t sec_mi2s_clk_count;
 	uint32_t quat_tdm_clk_count;
 };
 
@@ -121,6 +122,15 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
 		snd_soc_dai_set_fmt(cpu_dai, fmt);
 		break;
 
+	case SECONDARY_MI2S_TX:
+		if (++(data->sec_mi2s_clk_count) == 1) {
+			snd_soc_dai_set_sysclk(cpu_dai,
+				Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT,
+				MI2S_BCLK_RATE,	SNDRV_PCM_STREAM_CAPTURE);
+		}
+		snd_soc_dai_set_fmt(cpu_dai, fmt);
+		break;
+
 	case QUATERNARY_TDM_RX_0:
 	case QUATERNARY_TDM_TX_0:
 		if (++(data->quat_tdm_clk_count) == 1) {
@@ -157,6 +167,14 @@ static void  sdm845_snd_shutdown(struct snd_pcm_substream *substream)
 		};
 		break;
 
+	case SECONDARY_MI2S_TX:
+		if (--(data->sec_mi2s_clk_count) == 0) {
+			snd_soc_dai_set_sysclk(cpu_dai,
+				Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT,
+				0, SNDRV_PCM_STREAM_CAPTURE);
+		}
+		break;
+
 	case QUATERNARY_TDM_RX_0:
 	case QUATERNARY_TDM_TX_0:
 		if (--(data->quat_tdm_clk_count) == 0) {