Commit 99f5e971 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] pata_via: Cable detect error
  [PATCH] Fix help text for CONFIG_ATA_PIIX
  [PATCH] initializer entry defined twice in pata_rz1000
  [PATCH] ata: fix platform_device_register_simple() error check
  [PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
  [PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
  [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
  [libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
  [PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
  [PATCH] ata_piix: IDE mode SATA patch for Intel ICH9
parents a08727ba 5c9a7611
......@@ -40,9 +40,9 @@ config ATA_PIIX
tristate "Intel PIIX/ICH SATA support"
depends on PCI
help
This option enables support for ICH5/6/7/8 Serial ATA.
If PATA support was enabled previously, this enables
support for select Intel PIIX/ICH PATA host controllers.
This option enables support for ICH5/6/7/8 Serial ATA
and support for PATA on the Intel PIIX3/PIIX4/ICH series
PATA host controllers.
If unsure, say N.
......
......@@ -645,8 +645,6 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
u32 cap_save, impl_save, tmp;
cap_save = readl(mmio + HOST_CAP);
cap_save &= ( (1<<28) | (1<<17) );
cap_save |= (1 << 27);
impl_save = readl(mmio + HOST_PORTS_IMPL);
/* global controller reset */
......
......@@ -226,14 +226,26 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
/* Enterprise Southbridge 2 (where's the datasheet?) */
/* Enterprise Southbridge 2 (631xESB/632xESB) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* SATA Controller 1 IDE (ICH8, no datasheet yet) */
/* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller 2 IDE (ICH8, ditto) */
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* Mobile SATA Controller IDE (ICH8M, ditto) */
/* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ } /* terminate list */
};
......@@ -330,7 +342,7 @@ static const struct ata_port_operations ich_pata_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop,
.host_stop = piix_host_stop,
};
static const struct ata_port_operations piix_sata_ops = {
......
......@@ -1332,7 +1332,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
}
/**
* ata_exec_internal_sg - execute libata internal command
* ata_exec_internal - execute libata internal command
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
......@@ -1353,11 +1353,17 @@ unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen)
{
struct scatterlist sg;
struct scatterlist *psg = NULL, sg;
unsigned int n_elem = 0;
if (dma_dir != DMA_NONE) {
WARN_ON(!buf);
sg_init_one(&sg, buf, buflen);
psg = &sg;
n_elem++;
}
return ata_exec_internal_sg(dev, tf, cdb, dma_dir, &sg, 1);
return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem);
}
/**
......
......@@ -1539,7 +1539,7 @@ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out)
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
buf = kmap_atomic(sg->page, KM_USER0) + sg->offset;
buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
buflen = sg->length;
} else {
buf = cmd->request_buffer;
......@@ -1567,7 +1567,7 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf)
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
kunmap_atomic(buf - sg->offset, KM_USER0);
kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
}
......
......@@ -698,8 +698,10 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
goto fail_io;
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
if (pdev == NULL)
if (IS_ERR(pdev)) {
ret = PTR_ERR(pdev);
goto fail_dev;
}
if (ht6560a & mask) {
ops = &ht6560a_port_ops;
......
......@@ -247,8 +247,8 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
*/
pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
if (pdev == NULL)
return -ENOMEM;
if (IS_ERR(pdev))
return PTR_ERR(pdev);
memset(&ae, 0, sizeof(struct ata_probe_ent));
INIT_LIST_HEAD(&ae.node);
......
......@@ -105,8 +105,6 @@ static struct ata_port_operations rz1000_port_ops = {
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.error_handler = rz1000_error_handler,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
......
......@@ -161,10 +161,15 @@ static int via_pre_reset(struct ata_port *ap)
return -ENOENT;
}
if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)
if ((config->flags & VIA_UDMA) >= VIA_UDMA_100)
ap->cbl = via_cable_detect(ap);
else
/* The UDMA66 series has no cable detect so do drive side detect */
else if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA_UNK;
return ata_std_prereset(ap);
}
......
......@@ -206,8 +206,8 @@ static __init int winbond_init_one(unsigned long port)
*/
pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
if (pdev == NULL)
return -ENOMEM;
if (IS_ERR(pdev))
return PTR_ERR(pdev);
memset(&ae, 0, sizeof(struct ata_probe_ent));
INIT_LIST_HEAD(&ae.node);
......
......@@ -56,6 +56,8 @@
#define DRV_VERSION "2.0"
enum {
K2_FLAG_NO_ATAPI_DMA = (1 << 29),
/* Taskfile registers offsets */
K2_SATA_TF_CMD_OFFSET = 0x00,
K2_SATA_TF_DATA_OFFSET = 0x00,
......@@ -83,11 +85,33 @@ enum {
/* Port stride */
K2_SATA_PORT_OFFSET = 0x100,
board_svw4 = 0,
board_svw8 = 1,
};
static const struct k2_board_info {
unsigned int n_ports;
unsigned long port_flags;
} k2_board_info[] = {
/* board_svw4 */
{ 4, K2_FLAG_NO_ATAPI_DMA },
/* board_svw8 */
{ 8, K2_FLAG_NO_ATAPI_DMA },
};
static u8 k2_stat_check_status(struct ata_port *ap);
static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
return -1; /* ATAPI DMA not supported */
return 0;
}
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
......@@ -313,6 +337,7 @@ static const struct ata_port_operations k2_sata_ops = {
.check_status = k2_stat_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.check_atapi_dma = k2_sata_check_atapi_dma,
.bmdma_setup = k2_bmdma_setup_mmio,
.bmdma_start = k2_bmdma_start_mmio,
.bmdma_stop = ata_bmdma_stop,
......@@ -359,6 +384,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
void __iomem *mmio_base;
const struct k2_board_info *board_info =
&k2_board_info[ent->driver_data];
int pci_dev_busy = 0;
int rc;
int i;
......@@ -424,7 +451,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
probe_ent->sht = &k2_sata_sht;
probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO;
ATA_FLAG_MMIO | board_info->port_flags;
probe_ent->port_ops = &k2_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
......@@ -441,7 +468,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
/* different controllers have different number of ports - currently 4 or 8 */
/* All ports are on the same function. Multi-function device is no
* longer available. This should not be seen in any system. */
for (i = 0; i < ent->driver_data; i++)
for (i = 0; i < board_info->n_ports; i++)
k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
pci_set_master(pdev);
......@@ -469,11 +496,11 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
* controller
* */
static const struct pci_device_id k2_sata_pci_tbl[] = {
{ PCI_VDEVICE(SERVERWORKS, 0x0240), 4 },
{ PCI_VDEVICE(SERVERWORKS, 0x0241), 4 },
{ PCI_VDEVICE(SERVERWORKS, 0x0242), 8 },
{ PCI_VDEVICE(SERVERWORKS, 0x024a), 4 },
{ PCI_VDEVICE(SERVERWORKS, 0x024b), 4 },
{ PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 },
{ PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 },
{ PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 },
{ PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 },
{ PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 },
{ }
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment