Commit 9a1091ef authored by Yingjoe Chen's avatar Yingjoe Chen Committed by Jason Cooper

irqchip: gic: Support hierarchy irq domain.

Add support to use gic as a parent for stacked irq domain.
Signed-off-by: default avatarYingjoe Chen <yingjoe.chen@mediatek.com>
Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1416902662-19281-2-git-send-email-yingjoe.chen@mediatek.comSigned-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent b3a92e2c
......@@ -5,6 +5,7 @@ config IRQCHIP
config ARM_GIC
bool
select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select MULTI_IRQ_HANDLER
config GIC_NON_BANKED
......
......@@ -788,17 +788,16 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
{
if (hw < 32) {
irq_set_percpu_devid(irq);
irq_set_chip_and_handler(irq, &gic_chip,
handle_percpu_devid_irq);
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
handle_percpu_devid_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
} else {
irq_set_chip_and_handler(irq, &gic_chip,
handle_fasteoi_irq);
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
handle_fasteoi_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
gic_routable_irq_domain_ops->map(d, irq, hw);
}
irq_set_chip_data(irq, d->host_data);
return 0;
}
......@@ -858,6 +857,31 @@ static struct notifier_block gic_cpu_notifier = {
};
#endif
static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *arg)
{
int i, ret;
irq_hw_number_t hwirq;
unsigned int type = IRQ_TYPE_NONE;
struct of_phandle_args *irq_data = arg;
ret = gic_irq_domain_xlate(domain, irq_data->np, irq_data->args,
irq_data->args_count, &hwirq, &type);
if (ret)
return ret;
for (i = 0; i < nr_irqs; i++)
gic_irq_domain_map(domain, virq + i, hwirq + i);
return 0;
}
static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
.xlate = gic_irq_domain_xlate,
.alloc = gic_irq_domain_alloc,
.free = irq_domain_free_irqs_top,
};
static const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
.unmap = gic_irq_domain_unmap,
......@@ -947,6 +971,27 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
for (i = 0; i < NR_GIC_CPU_IF; i++)
gic_cpu_map[i] = 0xff;
/*
* Find out how many interrupts are supported.
* The GIC only supports up to 1020 interrupt sources.
*/
gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
gic->gic_irqs = gic_irqs;
if (node) { /* DT case */
const struct irq_domain_ops *ops = &gic_irq_domain_hierarchy_ops;
if (!of_property_read_u32(node, "arm,routable-irqs",
&nr_routable_irqs)) {
ops = &gic_irq_domain_ops;
gic_irqs = nr_routable_irqs;
}
gic->domain = irq_domain_add_linear(node, gic_irqs, ops, gic);
} else { /* Non-DT case */
/*
* For primary GICs, skip over SGIs.
* For secondary GICs, skip over PPIs, too.
......@@ -959,20 +1004,8 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
hwirq_base = 32;
}
/*
* Find out how many interrupts are supported.
* The GIC only supports up to 1020 interrupt sources.
*/
gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
gic->gic_irqs = gic_irqs;
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
if (of_property_read_u32(node, "arm,routable-irqs",
&nr_routable_irqs)) {
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
numa_node_id());
if (IS_ERR_VALUE(irq_base)) {
......@@ -983,10 +1016,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
hwirq_base, &gic_irq_domain_ops, gic);
} else {
gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
&gic_irq_domain_ops,
gic);
}
if (WARN_ON(!gic->domain))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment