Staging: remove stlc45xx driver

It's no longer needed as the p54spi driver is the same thing,
under a different name and in the correct portion of the kernel tree.


Cc: Javier Martinez Canillas <martinez.javier@gmail.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -93,8 +93,6 @@ source "drivers/staging/dst/Kconfig"
 
 source "drivers/staging/pohmelfs/Kconfig"
 
-source "drivers/staging/stlc45xx/Kconfig"
-
 source "drivers/staging/b3dfg/Kconfig"
 
 source "drivers/staging/phison/Kconfig"

drivers/staging/Makefile

@@ -29,7 +29,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_ANDROID)		+= dream/
 obj-$(CONFIG_DST)		+= dst/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
-obj-$(CONFIG_STLC45XX)		+= stlc45xx/
 obj-$(CONFIG_B3DFG)		+= b3dfg/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_PLAN9AUTH)		+= p9auth/

drivers/staging/stlc45xx/Kconfig

-config STLC45XX
-	tristate "stlc4550/4560 support"
-	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
-	---help---
-	  This is a driver for stlc4550 and stlc4560 chipsets.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called stlc45xx.  If unsure, say N.

drivers/staging/stlc45xx/Makefile

-obj-$(CONFIG_STLC45XX)	+= stlc45xx.o

drivers/staging/stlc45xx/stlc45xx.h

-/*
- * This file is part of stlc45xx
- *
- * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <net/mac80211.h>
-
-#include "stlc45xx_lmac.h"
-
-#define DRIVER_NAME "stlc45xx"
-#define DRIVER_VERSION "0.1.3"
-
-#define DRIVER_PREFIX DRIVER_NAME ": "
-
-enum {
-	DEBUG_NONE = 0,
-	DEBUG_FUNC = 1 << 0,
-	DEBUG_IRQ = 1 << 1,
-	DEBUG_BH = 1 << 2,
-	DEBUG_RX = 1 << 3,
-	DEBUG_RX_CONTENT = 1 << 5,
-	DEBUG_TX = 1 << 6,
-	DEBUG_TX_CONTENT = 1 << 8,
-	DEBUG_TXBUFFER = 1 << 9,
-	DEBUG_QUEUE = 1 << 10,
-	DEBUG_BOOT = 1 << 11,
-	DEBUG_PSM = 1 << 12,
-	DEBUG_ALL = ~0,
-};
-
-#define DEBUG_LEVEL DEBUG_NONE
-/* #define DEBUG_LEVEL DEBUG_ALL */
-/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */
-/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */
-/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */
-
-#define stlc45xx_error(fmt, arg...) \
-	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
-
-#define stlc45xx_warning(fmt, arg...) \
-	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
-
-#define stlc45xx_info(fmt, arg...) \
-	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
-
-#define stlc45xx_debug(level, fmt, arg...) \
-	do { \
-		if (level & DEBUG_LEVEL) \
-			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
-	} while (0)
-
-#define stlc45xx_dump(level, buf, len)		\
-	do { \
-		if (level & DEBUG_LEVEL) \
-			print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
-				       16, 1, buf, len, 1);		\
-	} while (0)
-
-#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5])
-#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
-
-/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */
-#define ADDR_READ_BIT_15  0x8000
-
-#define SPI_ADRS_ARM_INTERRUPTS     0x00
-#define SPI_ADRS_ARM_INT_EN	    0x04
-
-#define SPI_ADRS_HOST_INTERRUPTS    0x08
-#define SPI_ADRS_HOST_INT_EN	    0x0c
-#define SPI_ADRS_HOST_INT_ACK	    0x10
-
-#define SPI_ADRS_GEN_PURP_1   	    0x14
-#define SPI_ADRS_GEN_PURP_2   	    0x18
-
-/* high word */
-#define SPI_ADRS_DEV_CTRL_STAT      0x26
-
-#define SPI_ADRS_DMA_DATA      	    0x28
-
-#define SPI_ADRS_DMA_WRITE_CTRL     0x2c
-#define SPI_ADRS_DMA_WRITE_LEN      0x2e
-#define SPI_ADRS_DMA_WRITE_BASE     0x30
-
-#define SPI_ADRS_DMA_READ_CTRL      0x34
-#define SPI_ADRS_DMA_READ_LEN       0x36
-#define SPI_ADRS_DMA_READ_BASE      0x38
-
-#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000
-#define SPI_CTRL_STAT_START_HALTED  0x4000
-#define SPI_CTRL_STAT_RAM_BOOT      0x2000
-#define SPI_CTRL_STAT_HOST_RESET    0x1000
-#define SPI_CTRL_STAT_HOST_CPU_EN   0x0800
-
-#define SPI_DMA_WRITE_CTRL_ENABLE   0x0001
-#define SPI_DMA_READ_CTRL_ENABLE    0x0001
-#define HOST_ALLOWED                (1 << 7)
-
-#define FIRMWARE_ADDRESS                        0x20000
-
-#define SPI_TIMEOUT                             100         /* msec */
-
-#define SPI_MAX_TX_PACKETS                      32
-
-#define SPI_MAX_PACKET_SIZE                     32767
-
-#define SPI_TARGET_INT_WAKEUP                   0x00000001
-#define SPI_TARGET_INT_SLEEP                    0x00000002
-#define SPI_TARGET_INT_RDDONE                   0x00000004
-
-#define SPI_TARGET_INT_CTS                      0x00004000
-#define SPI_TARGET_INT_DR                       0x00008000
-
-#define SPI_HOST_INT_READY                      0x00000001
-#define SPI_HOST_INT_WR_READY                   0x00000002
-#define SPI_HOST_INT_SW_UPDATE                  0x00000004
-#define SPI_HOST_INT_UPDATE                     0x10000000
-
-/* clear to send */
-#define SPI_HOST_INT_CTS	                0x00004000
-
-/* data ready */
-#define SPI_HOST_INT_DR	                        0x00008000
-
-#define SPI_HOST_INTS_DEFAULT \
-	(SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)
-
-#define TARGET_BOOT_SLEEP 50
-
-/* The firmware buffer is divided into three areas:
- *
- * o config area (for control commands)
- * o tx buffer
- * o rx buffer
- */
-#define FIRMWARE_BUFFER_START 0x20200
-#define FIRMWARE_BUFFER_END 0x27c60
-#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START)
-#define FIRMWARE_MTU 3240
-#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024
-#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START
-#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \
-			     FIRMWARE_CONFIG_PAYLOAD_LEN)
-#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1)
-#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024)
-#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN)
-#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \
-			       FIRMWARE_RXBUFFER_LEN - 1)
-#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN)
-#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \
-			       FIRMWARE_RXBUFFER_LEN)
-#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \
-			       FIRMWARE_TXBUFFER_LEN - 1)
-
-#define FIRMWARE_TXBUFFER_HEADER 100
-#define FIRMWARE_TXBUFFER_TRAILER 4
-
-/* FIXME: come up with a proper value */
-#define MAX_FRAME_LEN 2500
-
-/* unit is ms */
-#define TX_FRAME_LIFETIME 2000
-#define TX_TIMEOUT 4000
-
-#define SUPPORTED_CHANNELS 13
-
-/* FIXME */
-/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */
-/* 	offsetof(struct s_lmo_scan, channel) */
-#define CHANNEL_CAL_LEN 292
-#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN)
-/* FIXME */
-/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */
-/* 	offsetof(struct s_lmo_scan, rssical) */
-#define RSSI_CAL_LEN 8
-#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN)
-
-struct s_dma_regs {
-	unsigned short cmd;
-	unsigned short len;
-	unsigned long addr;
-};
-
-struct stlc45xx_ie_tim {
-	u8 dtim_count;
-	u8 dtim_period;
-	u8 bmap_control;
-	u8 pvbmap[251];
-};
-
-struct txbuffer {
-	/* can be removed when switched to skb queue */
-	struct list_head tx_list;
-
-	struct list_head buffer_list;
-
-	int start;
-	int frame_start;
-	int end;
-
-	struct sk_buff *skb;
-	u32 handle;
-
-	bool status_needed;
-
-	int header_len;
-
-	/* unit jiffies */
-	unsigned long lifetime;
-};
-
-enum fw_state {
-	FW_STATE_OFF,
-	FW_STATE_BOOTING,
-	FW_STATE_READY,
-	FW_STATE_RESET,
-	FW_STATE_RESETTING,
-};
-
-struct stlc45xx {
-	struct ieee80211_hw *hw;
-	struct spi_device *spi;
-	struct work_struct work;
-	struct work_struct work_reset;
-	struct delayed_work work_tx_timeout;
-	struct mutex mutex;
-	struct completion fw_comp;
-
-
-	u8 bssid[ETH_ALEN];
-	u8 mac_addr[ETH_ALEN];
-	int channel;
-
-	u8 *cal_rssi;
-	u8 *cal_channels;
-
-	enum fw_state fw_state;
-
-	spinlock_t tx_lock;
-
-	/* protected by tx_lock */
-	struct list_head txbuffer;
-
-	/* protected by tx_lock */
-	struct list_head tx_pending;
-
-	/* protected by tx_lock */
-	int tx_queue_stopped;
-
-	/* protected by mutex */
-	struct list_head tx_sent;
-
-	int tx_frames;
-
-	u8 *fw;
-	int fw_len;
-
-	bool psm;
-	bool associated;
-	int aid;
-	bool pspolling;
-};
-
-