Commit 9abd613a authored by Thomas Bonnefille's avatar Thomas Bonnefille Committed by Conor Dooley

riscv: dts: thead: Fix node ordering in TH1520 device tree

According to the device tree coding style, nodes shall be ordered by
unit address in ascending order.
Signed-off-by: default avatarThomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: default avatarConor Dooley <conor.dooley@microchip.com>
parent 4cece764
......@@ -193,6 +193,33 @@ uart0: serial@ffe7014000 {
status = "disabled";
};
emmc: mmc@ffe7080000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7080000 0x0 0x10000>;
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdhci_clk>;
clock-names = "core";
status = "disabled";
};
sdio0: mmc@ffe7090000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7090000 0x0 0x10000>;
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdhci_clk>;
clock-names = "core";
status = "disabled";
};
sdio1: mmc@ffe70a0000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe70a0000 0x0 0x10000>;
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdhci_clk>;
clock-names = "core";
status = "disabled";
};
uart1: serial@ffe7f00000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f00000 0x0 0x100>;
......@@ -311,33 +338,6 @@ dmac0: dma-controller@ffefc00000 {
status = "disabled";
};
emmc: mmc@ffe7080000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7080000 0x0 0x10000>;
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdhci_clk>;
clock-names = "core";
status = "disabled";
};
sdio0: mmc@ffe7090000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe7090000 0x0 0x10000>;
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdhci_clk>;
clock-names = "core";
status = "disabled";
};
sdio1: mmc@ffe70a0000 {
compatible = "thead,th1520-dwcmshc";
reg = <0xff 0xe70a0000 0x0 0x10000>;
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sdhci_clk>;
clock-names = "core";
status = "disabled";
};
timer0: timer@ffefc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment