Commit 9b2d2f2a authored by Arend van Spriel's avatar Arend van Spriel Committed by John W. Linville

brcmfmac: use platform specific alignment in SDIO

The SDIO part of the brcmfmac driver uses a static define BRCMF_SDALIGN
to align buffers used for SDIO transfers. This patch replaces it by
using alignment derived from the platform specific data.
Reviewed-by: default avatarFranky Lin <frankyl@broadcom.com>
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e217d1c8
......@@ -389,7 +389,7 @@ struct brcmf_sdio {
u8 tx_seq; /* Transmit sequence number (next) */
u8 tx_max; /* Maximum transmit sequence allowed */
u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN];
u8 *hdrbuf; /* buffer for handling rx frame */
u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */
u8 rx_seq; /* Receive sequence number (expected) */
struct brcmf_sdio_hdrinfo cur_read;
......@@ -1580,9 +1580,9 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
goto done;
rbuf = bus->rxbuf;
pad = ((unsigned long)rbuf % BRCMF_SDALIGN);
pad = ((unsigned long)rbuf % bus->head_align);
if (pad)
rbuf += (BRCMF_SDALIGN - pad);
rbuf += (bus->head_align - pad);
/* Copy the already-read portion over */
memcpy(buf, hdr, BRCMF_FIRSTREAD);
......@@ -1596,14 +1596,10 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
((len + pad) < bus->sdiodev->bus_if->maxctl))
rdlen += pad;
} else if (rdlen % BRCMF_SDALIGN) {
rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
} else if (rdlen % bus->head_align) {
rdlen += bus->head_align - (rdlen % bus->head_align);
}
/* Satisfy length-alignment requirements */
if (rdlen & (ALIGNMENT - 1))
rdlen = roundup(rdlen, ALIGNMENT);
/* Drop if the read is too big or it exceeds our maximum */
if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
......@@ -1668,8 +1664,8 @@ static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
if (*pad <= bus->roundup && *pad < bus->blocksize &&
*rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ)
*rdlen += *pad;
} else if (*rdlen % BRCMF_SDALIGN) {
*rdlen += BRCMF_SDALIGN - (*rdlen % BRCMF_SDALIGN);
} else if (*rdlen % bus->head_align) {
*rdlen += bus->head_align - (*rdlen % bus->head_align);
}
}
......@@ -1757,7 +1753,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
brcmf_pad(bus, &pad, &rd->len_left);
pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read +
BRCMF_SDALIGN);
bus->head_align);
if (!pkt) {
/* Give up on data, request rtx of events */
brcmf_err("brcmu_pkt_buf_get_skb failed\n");
......@@ -1767,7 +1763,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
continue;
}
skb_pull(pkt, head_read);
pkt_align(pkt, rd->len_left, BRCMF_SDALIGN);
pkt_align(pkt, rd->len_left, bus->head_align);
ret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, pkt);
......@@ -2762,14 +2758,14 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
len = (msglen += bus->tx_hdrlen);
/* Add alignment padding (optional for ctl frames) */
doff = ((unsigned long)frame % BRCMF_SDALIGN);
doff = ((unsigned long)frame % bus->head_align);
if (doff) {
frame -= doff;
len += doff;
msglen += doff;
memset(frame, 0, doff + bus->tx_hdrlen);
}
/* precondition: doff < BRCMF_SDALIGN */
/* precondition: doff < bus->head_align */
doff += bus->tx_hdrlen;
/* Round send length to next SDIO block */
......@@ -2778,15 +2774,11 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
pad = bus->blocksize - (len % bus->blocksize);
if ((pad > bus->roundup) || (pad >= bus->blocksize))
pad = 0;
} else if (len % BRCMF_SDALIGN) {
pad = BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
} else if (len % bus->head_align) {
pad = bus->head_align - (len % bus->head_align);
}
len += pad;
/* Satisfy length-alignment requirements */
if (len & (ALIGNMENT - 1))
len = roundup(len, ALIGNMENT);
/* precondition: IS_ALIGNED((unsigned long)frame, 2) */
/* Make sure backplane clock is on */
......@@ -2798,10 +2790,8 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
hd_info.channel = SDPCM_CONTROL_CHANNEL;
hd_info.dat_offset = doff;
hd_info.seq_num = bus->tx_seq;
if (bus->txglom) {
hd_info.lastfrm = true;
hd_info.tail_pad = pad;
}
brcmf_sdio_hdpack(bus, frame, &hd_info);
if (bus->txglom)
......@@ -3823,7 +3813,7 @@ static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
if (bus->sdiodev->bus_if->maxctl) {
bus->rxblen =
roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
ALIGNMENT) + BRCMF_SDALIGN;
ALIGNMENT) + bus->head_align;
bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
if (!(bus->rxbuf))
return false;
......@@ -3924,9 +3914,13 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
/* allocate header buffer */
bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL);
if (!bus->hdrbuf)
return false;
/* Locate an appropriately-aligned portion of hdrbuf */
bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
BRCMF_SDALIGN);
bus->head_align);
/* Set the poll and/or interrupt flags */
bus->intr = true;
......@@ -4047,7 +4041,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
brcmu_pkt_buf_free_skb(bus->txglom_sgpad);
brcmf_sdbrcm_release_malloc(bus);
kfree(bus->hdrbuf);
kfree(bus);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment