USB: gadget: Add EEM gadget driver

This patch adds a CDC EEM ethernet gadget driver.  CDC EEM is a newer
USB ethernet specification that uses a simpler interface than the older
CDC ECM.  This makes CDC EEM usable by a wider set of USB hardware.
By default the ethernet gadget will still use CDC ECM/Subset, but kernel
configuration and/or a module parameter will allow alternative use of
the CDC EEM protocol.

Changes since last version:
	- Brought in missing RNDIS changes that caused compile error
	- Modified 'sentinel CRC' checking to match EEM host driver
Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/Kconfig

@@ -628,8 +628,8 @@ config USB_ETH
 	tristate "Ethernet Gadget (with CDC Ethernet support)"
 	depends on NET
 	help
-	  This driver implements Ethernet style communication, in either
-	  of two ways:
+	  This driver implements Ethernet style communication, in one of
+	  several ways:
 	  
 	   - The "Communication Device Class" (CDC) Ethernet Control Model.
 	     That protocol is often avoided with pure Ethernet adapters, in
@@ -639,7 +639,11 @@ config USB_ETH
 	   - On hardware can't implement that protocol, a simple CDC subset
 	     is used, placing fewer demands on USB.
 
-	  RNDIS support is a third option, more demanding than that subset.
+	   - CDC Ethernet Emulation Model (EEM) is a newer standard that has
+	     a simpler interface that can be used by more USB hardware.
+
+	  RNDIS support is an additional option, more demanding than than
+	  subset.
 
 	  Within the USB device, this gadget driver exposes a network device
 	  "usbX", where X depends on what other networking devices you have.
@@ -672,6 +676,22 @@ config USB_ETH_RNDIS
 	   XP, you'll need to download drivers from Microsoft's website; a URL
 	   is given in comments found in that info file.
 
+config USB_ETH_EEM
+       bool "Ethernet Emulation Model (EEM) support"
+       depends on USB_ETH
+       default n
+       help
+         CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+         and therefore can be supported by more hardware.  Technically ECM and
+         EEM are designed for different applications.  The ECM model extends
+         the network interface to the target (e.g. a USB cable modem), and the
+         EEM model is for mobile devices to communicate with hosts using
+         ethernet over USB.  For Linux gadgets, however, the interface with
+         the host is the same (a usbX device), so the differences are minimal.
+
+         If you say "y" here, the Ethernet gadget driver will use the EEM
+         protocol rather than ECM.  If unsure, say "n".
+
 config USB_GADGETFS
 	tristate "Gadget Filesystem (EXPERIMENTAL)"
 	depends on EXPERIMENTAL

drivers/usb/gadget/ether.c

@@ -61,6 +61,11 @@
  * simpler, Microsoft pushes their own approach: RNDIS.  The published
  * RNDIS specs are ambiguous and appear to be incomplete, and are also
  * needlessly complex.  They borrow more from CDC ACM than CDC ECM.
+ *
+ * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet
+ * interface to the target, CDC EEM was designed to use ethernet over the USB
+ * link between the host and target.  CDC EEM is implemented as an alternative
+ * to those other protocols when that communication model is more appropriate
  */
 
 #define DRIVER_DESC		"Ethernet Gadget"
@@ -114,6 +119,7 @@ static inline bool has_rndis(void)
 #include "f_rndis.c"
 #include "rndis.c"
 #endif
+#include "f_eem.c"
 #include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
@@ -150,6 +156,10 @@ static inline bool has_rndis(void)
 #define RNDIS_VENDOR_NUM	0x0525	/* NetChip */
 #define RNDIS_PRODUCT_NUM	0xa4a2	/* Ethernet/RNDIS Gadget */
 
+/* For EEM gadgets */
+#define EEM_VENDOR_NUM	0x0525	/* INVALID - NEEDS TO BE ALLOCATED */
+#define EEM_PRODUCT_NUM	0xa4a1	/* INVALID - NEEDS TO BE ALLOCATED */
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
@@ -246,8 +256,16 @@ static struct usb_configuration rndis_config_driver = {
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_USB_ETH_EEM
+static int use_eem = 1;
+#else
+static int use_eem;
+#endif
+module_param(use_eem, bool, 0);
+MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
+
 /*
- * We _always_ have an ECM or CDC Subset configuration.
+ * We _always_ have an ECM, CDC Subset, or EEM configuration.
  */
 static int __init eth_do_config(struct usb_configuration *c)
 {
@@ -258,7 +276,9 @@ static int __init eth_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	if (can_support_ecm(c->cdev->gadget))
+	if (use_eem)
+		return eem_bind_config(c);
+	else if (can_support_ecm(c->cdev->gadget))
 		return ecm_bind_config(c, hostaddr);
 	else
 		return geth_bind_config(c, hostaddr);
@@ -286,7 +306,12 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		return status;
 
 	/* set up main config label and device descriptor */
-	if (can_support_ecm(cdev->gadget)) {
+	if (use_eem) {
+		/* EEM */
+		eth_config_driver.label = "CDC Ethernet (EEM)";
+		device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
+		device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
+	} else if (can_support_ecm(cdev->gadget)) {
 		/* ECM */
 		eth_config_driver.label = "CDC Ethernet (ECM)";
 	} else {

drivers/usb/gadget/f_eem.c

+/*
+ * f_eem.c -- USB CDC Ethernet (EEM) link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 EF Johnson Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+
+#include "u_ether.h"
+
+#define EEM_HLEN 2
+
+/*
+ * This function is a "CDC Ethernet Emulation Model" (CDC EEM)
+ * Ethernet link.
+ */
+
+struct eem_ep_descs {
+	struct usb_endpoint_descriptor	*in;
+	struct usb_endpoint_descriptor	*out;
+};
+
+struct f_eem {
+	struct gether			port;
+	u8				ctrl_id;
+
+	struct eem_ep_descs		fs;
+	struct eem_ep_descs		hs;
+};
+
+static inline struct f_eem *func_to_eem(struct usb_function *f)
+{
+	return container_of(f, struct f_eem, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor eem_intf __initdata = {
+	.bLength =		sizeof eem_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_EEM,
+	.bInterfaceProtocol =	USB_CDC_PROTO_EEM,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor eem_fs_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor eem_fs_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eem_fs_function[] __initdata = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_fs_in_desc,
+	(struct usb_descriptor_header *) &eem_fs_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor eem_hs_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor eem_hs_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eem_hs_function[] __initdata = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_hs_in_desc,
+	(struct usb_descriptor_header *) &eem_hs_out_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string eem_string_defs[] = {
+	[0].s = "CDC Ethernet Emulation Model (EEM)",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings eem_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		eem_string_defs,
+};
+
+static struct usb_gadget_strings *eem_strings[] = {
+	&eem_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest,
+		w_value, w_index, w_length);
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct net_device	*net;
+
+	/* we know alt == 0, so this is an activation or a reset */
+	if (alt != 0)
+		goto fail;
+
+	if (intf == eem->ctrl_id) {
+
+		if (eem->port.in_ep->driver_data) {
+			DBG(cdev, "reset eem\n");
+			gether_disconnect(&eem->port);
+		}
+
+		if (!eem->port.in) {
+			DBG(cdev, "init eem\n");
+			eem->port.in = ep_choose(cdev->gadget,
+					eem->hs.in, eem->fs.in);
+			eem->port.out = ep_choose(cdev->gadget,
+					eem->hs.out, eem->fs.out);
+		}
+
+		/* zlps should not occur because zero-length EEM packets
+		 * will be inserted in those cases where they would occur
+		 */
+		eem->port.is_zlp_ok = 1;
+		eem->port.cdc_filter = DEFAULT_FILTER;
+		DBG(cdev, "activate eem\n");
+		net = gether_connect(&eem->port);
+		if (IS_ERR(net))
+			return PTR_ERR(net);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+static void eem_disable(struct usb_function *f)
+{
+	struct f_eem		*eem = func_to_eem(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "eem deactivated\n");
+
+	if (eem->port.in_ep->driver_data)
+		gether_disconnect(&eem->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EEM function driver setup/binding */
+
+static int __init
+eem_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_eem		*eem = func_to_eem(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	eem->ctrl_id = status;
+	eem_intf.bInterfaceNumber = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc);
+	if (!ep)
+		goto fail;
+	eem->port.in_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc);
+	if (!ep)
+		goto fail;
+	eem->port.out_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	status = -ENOMEM;
+
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(eem_fs_function);
+	if (!f->descriptors)
+		goto fail;
+
+	eem->fs.in = usb_find_endpoint(eem_fs_function,
+			f->descriptors, &eem_fs_in_desc);
+	eem->fs.out = usb_find_endpoint(eem_fs_function,
+			f->descriptors, &eem_fs_out_desc);
+
+	/* support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		eem_hs_in_desc.bEndpointAddress =
+				eem_fs_in_desc.bEndpointAddress;
+		eem_hs_out_desc.bEndpointAddress =
+				eem_fs_out_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
+		if (!f->hs_descriptors)
+			goto fail;
+
+		eem->hs.in = usb_find_endpoint(eem_hs_function,
+				f->hs_descriptors, &eem_hs_in_desc);
+		eem->hs.out = usb_find_endpoint(eem_hs_function,
+				f->hs_descriptors, &eem_hs_out_desc);
+	}
+
+	DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			eem->port.in_ep->name, eem->port.out_ep->name);
+	return 0;
+
+fail:
+	if (f->descriptors)
+		usb_free_descriptors(f->descriptors);
+
+	/* we might as well release our claims on endpoints */
+	if (eem->port.out)
+		eem->port.out_ep->driver_data = NULL;
+	if (eem->port.in)
+		eem->port.in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static void
+eem_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_eem	*eem = func_to_eem(f);
+
+	DBG(c->cdev, "eem unbind\n");
+
+	if (gadget_is_dualspeed(c->cdev->gadget))
+		usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+	kfree(eem);
+}
+
+static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
+{
+}
+
+/*
+ * Add the EEM header and ethernet checksum.
+ * We currently do not attempt to put multiple ethernet frames
+ * into a single USB transfer
+ */
+static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb)
+{
+	struct sk_buff	*skb2 = NULL;
+	struct usb_ep	*in = port->in_ep;
+	int		padlen = 0;
+	u16		len = skb->len;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		/* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0,
+		 * stick two bytes of zero-length EEM packet on the end.
+		 */
+		if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0)
+			padlen += 2;
+
+		if ((tailroom >= (ETH_FCS_LEN + padlen)) &&
+				(headroom >= EEM_HLEN))
+			goto done;
+	}
+
+	skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC);
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+	if (!skb)
+		return skb;
+
+done:
+	/* use the "no CRC" option */
+	put_unaligned_be32(0xdeadbeef, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (0 == sentinel CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+
+	/* add a zero-length EEM packet, if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+/*
+ * Remove the EEM header.  Note that there can be many EEM packets in a single
+ * USB transfer, so we need to break them out and handle them independently.
+ */
+static int eem_unwrap(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
+{
+	struct usb_composite_dev	*cdev = port->func.config->cdev;
+	int				status = 0;
+
+	do {
+		struct sk_buff	*skb2;
+		u16		header;
+		u16		len = 0;
+
+		if (skb->len < EEM_HLEN) {
+			status = -EINVAL;
+			DBG(cdev, "invalid EEM header\n");
+			goto error;
+		}
+
+		/* remove the EEM header */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HLEN);
+
+		/* EEM packet header format:
+		 * b0..14:	EEM type dependent (data or command)
+		 * b15:		bmType (0 == data, 1 == command)
+		 */
+		if (header & BIT(15)) {
+			struct usb_request	*req = cdev->req;
+			u16			bmEEMCmd;
+
+			/* EEM command packet format:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		reserved (must be zero)
+			 * b15:		bmType (1 == command)
+			 */
+			if (header & BIT(14))
+				continue;
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+			case 0: /* echo */
+				len = header & 0x7FF;
+				if (skb->len < len) {
+					status = -EOVERFLOW;
+					goto error;
+				}
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2)) {
+					DBG(cdev, "EEM echo response error\n");
+					goto next;
+				}
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | BIT(11) | len,
+							skb_push(skb2, 2));
+				skb_copy_bits(skb, 0, req->buf, skb->len);
+				req->length = skb->len;
+				req->complete = eem_cmd_complete;
+				req->zero = 1;
+				if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
+					DBG(cdev, "echo response queue fail\n");
+				break;
+
+			case 1:  /* echo response */
+			case 2:  /* suspend hint */
+			case 3:  /* response hint */
+			case 4:  /* response complete hint */
+			case 5:  /* tickle */
+			default: /* reserved */
+				continue;
+			}
+		} else {
+			u32		crc, crc2;
+			struct sk_buff	*skb3;
+
+			/* check for zero-length EEM packet */
+			if (header == 0)
+				continue;
+
+			/* EEM data packet format:
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC (0 == sentinel, 1 == calculated)
+			 * b15:		bmType (0 == data)
+			 */
+			len = header & 0x3FFF;
+			if ((skb->len < len)
+					|| (len < (ETH_HLEN + ETH_FCS_LEN))) {
+				status = -EINVAL;
+				goto error;
+			}
+
+			/* validate CRC */
+			crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
+			if (header & BIT(14)) {
+				crc = get_unaligned_le32(skb->data + len
+							- ETH_FCS_LEN);
+				crc2 = ~crc32_le(~0,
+						skb->data,
+						skb->len - ETH_FCS_LEN);
+			} else {
+				crc = get_unaligned_be32(skb->data + len
+							- ETH_FCS_LEN);
+				crc2 = 0xdeadbeef;
+			}
+			if (crc != crc2) {
+				DBG(cdev, "invalid EEM CRC\n");
+				goto next;
+			}
+
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!skb2)) {
+				DBG(cdev, "unable to unframe EEM packet\n");
+				continue;
+			}
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			skb3 = skb_copy_expand(skb2,
+						NET_IP_ALIGN,
+						0,
+						GFP_ATOMIC);
+			if (unlikely(!skb3)) {
+				DBG(cdev, "unable to realign EEM packet\n");
+				dev_kfree_skb_any(skb2);
+				continue;
+			}
+			dev_kfree_skb_any(skb2);
+			skb_queue_tail(list, skb3);
+		}
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+error:
+	dev_kfree_skb_any(skb);
+	return status;
+}
+
+/**
+ * eem_bind_config - add CDC Ethernet (EEM) network link to a configuration
+ * @c: the configuration to support the network link
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup().  Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init eem_bind_config(struct usb_configuration *c)
+{
+	struct f_eem	*eem;
+	int		status;
+
+	/* maybe allocate device-global string IDs */
+	if (eem_string_defs[0].id == 0) {
+
+		/* control interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		eem_string_defs[0].id = status;
+		eem_intf.iInterface = status;
+	}
+
+	/* allocate and initialize one new instance */
+	eem = kzalloc(sizeof *eem, GFP_KERNEL);
+	if (!eem)
+		return -ENOMEM;
+
+	eem->port.cdc_filter = DEFAULT_FILTER;
+
+	eem->port.func.name = "cdc_eem";
+	eem->port.func.strings = eem_strings;
+	/* descriptors are per-instance copies */
+	eem->port.func.bind = eem_bind;
+	eem->port.func.unbind = eem_unbind;
+	eem->port.func.set_alt = eem_set_alt;
+	eem->port.func.setup = eem_setup;
+	eem->port.func.disable = eem_disable;
+	eem->port.wrap = eem_wrap;
+	eem->port.unwrap = eem_unwrap;
+	eem->port.header_len = EEM_HLEN;
+
+	status = usb_add_function(c, &eem->port.func);
+	if (status)
+		kfree(eem);
+	return status;
+}
+

drivers/usb/gadget/f_rndis.c

@@ -286,12 +286,17 @@ static struct usb_gadget_strings *rndis_strings[] = {
 
 /*-------------------------------------------------------------------------*/
 
-static struct sk_buff *rndis_add_header(struct sk_buff *skb)
+static struct sk_buff *rndis_add_header(struct gether *port,
+					struct sk_buff *skb)
 {
-	skb = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
-	if (skb)
-		rndis_add_hdr(skb);
-	return skb;
+	struct sk_buff *skb2;
+
+	skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
+	if (skb2)
+		rndis_add_hdr(skb2);
+
+	dev_kfree_skb_any(skb);
+	return skb2;
 }
 
 static void rndis_response_available(void *_rndis)

drivers/usb/gadget/rndis.c

@@ -1022,22 +1022,29 @@ static rndis_resp_t *rndis_add_response (int configNr, u32 length)
 	return r;
 }
 
-int rndis_rm_hdr(struct sk_buff *skb)
+int rndis_rm_hdr(struct gether *port,
+			struct sk_buff *skb,
+			struct sk_buff_head *list)
 {
 	/* tmp points to a struct rndis_packet_msg_type */
 	__le32		*tmp = (void *) skb->data;
 
 	/* MessageType, MessageLength */
 	if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
-			!= get_unaligned(tmp++))
+			!= get_unaligned(tmp++)) {
+		dev_kfree_skb_any(skb);
 		return -EINVAL;
+	}
 	tmp++;
 
 	/* DataOffset, DataLength */
-	if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8))
+	if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) {
+		dev_kfree_skb_any(skb);
 		return -EOVERFLOW;
+	}
 	skb_trim(skb, get_unaligned_le32(tmp++));
 
+	skb_queue_tail(list, skb);
 	return 0;
 }
 

drivers/usb/gadget/rndis.h

@@ -251,7 +251,8 @@ int  rndis_set_param_vendor (u8 configNr, u32 vendorID,
 			    const char *vendorDescr);
 int  rndis_set_param_medium (u8 configNr, u32 medium, u32 speed);
 void rndis_add_hdr (struct sk_buff *skb);
-int rndis_rm_hdr (struct sk_buff *skb);
+int rndis_rm_hdr(struct gether *port, struct sk_buff *skb,
+			struct sk_buff_head *list);
 u8   *rndis_get_next_response (int configNr, u32 *length);
 void rndis_free_response (int configNr, u8 *buf);
 

drivers/usb/gadget/u_ether.c

@@ -37,8 +37,9 @@
  * one (!) network link through the USB gadget stack, normally "usb0".
  *
  * The control and data models are handled by the function driver which
- * connects to this code; such as CDC Ethernet, "CDC Subset", or RNDIS.
- * That includes all descriptor and endpoint management.
+ * connects to this code; such as CDC Ethernet (ECM or EEM),
+ * "CDC Subset", or RNDIS.  That includes all descriptor and endpoint
+ * management.
  *
  * Link level addressing is handled by this component using module
  * parameters; if no such parameters are provided, random link level
@@ -68,9 +69,13 @@ struct eth_dev {
 	struct list_head	tx_reqs, rx_reqs;
 	atomic_t		tx_qlen;
 
+	struct sk_buff_head	rx_frames;
+
 	unsigned		header_len;
-	struct sk_buff		*(*wrap)(struct sk_buff *skb);
-	int			(*unwrap)(struct sk_buff *skb);
+	struct sk_buff		*(*wrap)(struct gether *, struct sk_buff *skb);
+	int			(*unwrap)(struct gether *,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
 
 	struct work_struct	work;
 
@@ -269,7 +274,7 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 
 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct sk_buff	*skb = req->context;
+	struct sk_buff	*skb = req->context, *skb2;
 	struct eth_dev	*dev = ep->driver_data;
 	int		status = req->status;
 
@@ -278,26 +283,47 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 	/* normal completion */
 	case 0:
 		skb_put(skb, req->actual);
-		if (dev->unwrap)
-			status = dev->unwrap(skb);
-		if (status < 0
-				|| ETH_HLEN > skb->len
-				|| skb->len > ETH_FRAME_LEN) {
-			dev->net->stats.rx_errors++;
-			dev->net->stats.rx_length_errors++;
-			DBG(dev, "rx length %d\n", skb->len);
-			break;
-		}
 
-		skb->protocol = eth_type_trans(skb, dev->net);
-		dev->net->stats.rx_packets++;
-		dev->net->stats.rx_bytes += skb->len;
+		if (dev->unwrap) {
+			unsigned long	flags;
 
-		/* no buffer copies needed, unless hardware can't
-		 * use skb buffers.
-		 */
-		status = netif_rx(skb);
+			spin_lock_irqsave(&dev->lock, flags);
+			if (dev->port_usb) {
+				status = dev->unwrap(dev->port_usb,
+							skb,
+							&dev->rx_frames);
+			} else {
+				dev_kfree_skb_any(skb);
+				status = -ENOTCONN;
+			}
+			spin_unlock_irqrestore(&dev->lock, flags);
+		} else {
+			skb_queue_tail(&dev->rx_frames, skb);
+		}
 		skb = NULL;
+
+		skb2 = skb_dequeue(&dev->rx_frames);
+		while (skb2) {
+			if (status < 0
+					|| ETH_HLEN > skb2->len
+					|| skb2->len > ETH_FRAME_LEN) {
+				dev->net->stats.rx_errors++;
+				dev->net->stats.rx_length_errors++;
+				DBG(dev, "rx length %d\n", skb2->len);
+				dev_kfree_skb_any(skb2);
+				goto next_frame;
+			}
+			skb2->protocol = eth_type_trans(skb2, dev->net);
+			dev->net->stats.rx_packets++;
+			dev->net->stats.rx_bytes += skb2->len;
+
+			/* no buffer copies needed, unless hardware can't
+			 * use skb buffers.
+			 */
+			status = netif_rx(skb2);
+next_frame:
+			skb2 = skb_dequeue(&dev->rx_frames);
+		}
 		break;
 
 	/* software-driven interface shutdown */
@@ -537,14 +563,15 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	 * or there's not enough space for extra headers we need
 	 */
 	if (dev->wrap) {
-		struct sk_buff	*skb_new;
+		unsigned long	flags;
 
-		skb_new = dev->wrap(skb);
-		if (!skb_new)
+		spin_lock_irqsave(&dev->lock, flags);
+		if (dev->port_usb)
+			skb = dev->wrap(dev->port_usb, skb);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		if (!skb)
 			goto drop;
 
-		dev_kfree_skb_any(skb);
-		skb = skb_new;
 		length = skb->len;
 	}
 	req->buf = skb->data;
@@ -578,9 +605,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	}
 
 	if (retval) {
+		dev_kfree_skb_any(skb);
 drop:
 		dev->net->stats.tx_dropped++;
-		dev_kfree_skb_any(skb);
 		spin_lock_irqsave(&dev->req_lock, flags);
 		if (list_empty(&dev->tx_reqs))
 			netif_start_queue(net);
@@ -753,6 +780,8 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
 	INIT_LIST_HEAD(&dev->tx_reqs);
 	INIT_LIST_HEAD(&dev->rx_reqs);
 
+	skb_queue_head_init(&dev->rx_frames);
+
 	/* network device setup */
 	dev->net = net;
 	strcpy(net->name, "usb%d");

drivers/usb/gadget/u_ether.h

@@ -60,12 +60,13 @@ struct gether {
 
 	u16				cdc_filter;
 
-	/* hooks for added framing, as needed for RNDIS and EEM.
-	 * we currently don't support multiple frames per SKB.
-	 */
+	/* hooks for added framing, as needed for RNDIS and EEM. */
 	u32				header_len;
-	struct sk_buff			*(*wrap)(struct sk_buff *skb);
-	int				(*unwrap)(struct sk_buff *skb);
+	struct sk_buff			*(*wrap)(struct gether *port,
+						struct sk_buff *skb);
+	int				(*unwrap)(struct gether *port,
+						struct sk_buff *skb,
+						struct sk_buff_head *list);
 
 	/* called on network open/close */
 	void				(*open)(struct gether *);
@@ -109,6 +110,7 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
 /* each configuration may bind one instance of an ethernet link */
 int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int eem_bind_config(struct usb_configuration *c);
 
 #ifdef CONFIG_USB_ETH_RNDIS