V4L/DVB (3354a): Remove old MODULE_PARM in media/video/

Changes MODULE_PARM usage to module_param
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/arv.c

@@ -129,9 +129,9 @@ static unsigned char	yuv[MAX_AR_FRAME_BYTES];
 static int freq = DEFAULT_FREQ;	/* BCLK: available 50 or 70 (MHz) */
 static int vga = 0;		/* default mode(0:QVGA mode, other:VGA mode) */
 static int vga_interlace = 0;	/* 0 is normal mode for, else interlace mode */
-MODULE_PARM(freq, "i");
-MODULE_PARM(vga, "i");
-MODULE_PARM(vga_interlace, "i");
+module_param(freq, int, 0);
+module_param(vga, int, 0);
+module_param(vga_interlace, int, 0);
 
 static int ar_initialize(struct video_device *dev);
 

drivers/media/video/planb.c

@@ -76,9 +76,9 @@ static volatile struct planb_registers *planb_regs;
 static int def_norm = PLANB_DEF_NORM;	/* default norm */
 static int video_nr = -1;
 
-MODULE_PARM(def_norm, "i");
+module_param(def_norm, int, 0);
 MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)");
-MODULE_PARM(video_nr,"i");
+module_param(video_nr, int, 0);
 MODULE_LICENSE("GPL");
 
 

drivers/media/video/saa6588.c

@@ -50,15 +50,15 @@ static unsigned int rbds = 0;
 static unsigned int plvl = 0;
 static unsigned int bufblocks = 100;
 
-MODULE_PARM(debug, "i");
+module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
-MODULE_PARM(xtal, "i");
+module_param(xtal, int, 0);
 MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0");
-MODULE_PARM(rbds, "i");
+module_param(rbds, int, 0);
 MODULE_PARM_DESC(rbds, "select mode, 0=RDS, 1=RBDS, default 0");
-MODULE_PARM(plvl, "i");
+module_param(plvl, int, 0);
 MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0");
-MODULE_PARM(bufblocks, "i");
+module_param(bufblocks, int, 0);
 MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100");
 
 MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder");

drivers/media/video/saa711x.c

@@ -52,7 +52,7 @@ MODULE_LICENSE("GPL");
 #include <linux/video_decoder.h>
 
 static int debug = 0;
-MODULE_PARM(debug, "i");
+module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, " Set the default Debug level.  Default: 0 (Off) - (0-1)");