mmc: sh_mmcif: separate sh_mmcif_clk_update() into setup and prepare

Current sh_mmcif_clk_update() is called from probe() and set_ios(),
but, the purpose of later one is just clk_prepare_enable().
No need to setup mmc->f_max/f_min in many times.
This patch separe sh_mmcif_clk_update() into clk_prepare_enable()
and mmc->f_max/f_min setup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sh_mmcif.c

@@ -978,18 +978,12 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	sh_mmcif_start_cmd(host, mrq);
 }
 
-static int sh_mmcif_clk_update(struct sh_mmcif_host *host)
+static void sh_mmcif_clk_setup(struct sh_mmcif_host *host)
 {
-	int ret = clk_prepare_enable(host->clk);
-
-	if (!ret) {
 	unsigned int clk = clk_get_rate(host->clk);
 
 	host->mmc->f_max = clk / 2;
 	host->mmc->f_min = clk / 512;
-	}
-
-	return ret;
 }
 
 static void sh_mmcif_set_power(struct sh_mmcif_host *host, struct mmc_ios *ios)
@@ -1046,7 +1040,8 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	if (ios->clock) {
 		if (!host->power) {
-			sh_mmcif_clk_update(host);
+			clk_prepare_enable(host->clk);
+
 			pm_runtime_get_sync(&host->pd->dev);
 			host->power = true;
 			sh_mmcif_sync_reset(host);
@@ -1447,10 +1442,13 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 		dev_err(dev, "cannot get clock: %d\n", ret);
 		goto err_pm;
 	}
-	ret = sh_mmcif_clk_update(host);
+
+	ret = clk_prepare_enable(host->clk);
 	if (ret < 0)
 		goto err_pm;
 
+	sh_mmcif_clk_setup(host);
+
 	ret = pm_runtime_resume(dev);
 	if (ret < 0)
 		goto err_clk;