Commit 9be7d864 authored by Thierry Reding's avatar Thierry Reding

drm/tegra: Implement panel support

Use the DRM panel framework to attach a panel to an output. If the panel
attached to a connector supports supports the backlight brightness
accessors, a property will be available to allow the brightness to be
modified from userspace.
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 210fcd9d
......@@ -125,6 +125,7 @@ of the following host1x client modules:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
- nvidia,edid: supplies a binary EDID blob
- nvidia,panel: phandle of a display panel
- hdmi: High Definition Multimedia Interface
......@@ -149,6 +150,7 @@ of the following host1x client modules:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
- nvidia,edid: supplies a binary EDID blob
- nvidia,panel: phandle of a display panel
- tvo: TV encoder output
......
......@@ -6,6 +6,7 @@ config DRM_TEGRA
select TEGRA_HOST1X
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
select DRM_PANEL
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
......
......@@ -186,6 +186,7 @@ struct tegra_output {
const struct tegra_output_ops *ops;
enum tegra_output_type type;
struct drm_panel *panel;
struct i2c_adapter *ddc;
const struct edid *edid;
unsigned int hpd_irq;
......
......@@ -9,6 +9,7 @@
#include <linux/of_gpio.h>
#include <drm/drm_panel.h>
#include "drm.h"
static int tegra_connector_get_modes(struct drm_connector *connector)
......@@ -17,6 +18,12 @@ static int tegra_connector_get_modes(struct drm_connector *connector)
struct edid *edid = NULL;
int err = 0;
if (output->panel) {
err = output->panel->funcs->get_modes(output->panel);
if (err > 0)
return err;
}
if (output->edid)
edid = kmemdup(output->edid, sizeof(*edid), GFP_KERNEL);
else if (output->ddc)
......@@ -72,6 +79,11 @@ tegra_connector_detect(struct drm_connector *connector, bool force)
else
status = connector_status_connected;
} else {
if (!output->panel)
status = connector_status_disconnected;
else
status = connector_status_connected;
if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
status = connector_status_connected;
}
......@@ -115,6 +127,15 @@ static const struct drm_encoder_funcs encoder_funcs = {
static void tegra_encoder_dpms(struct drm_encoder *encoder, int mode)
{
struct tegra_output *output = encoder_to_output(encoder);
struct drm_panel *panel = output->panel;
if (panel && panel->funcs) {
if (mode != DRM_MODE_DPMS_ON)
drm_panel_disable(panel);
else
drm_panel_enable(panel);
}
}
static bool tegra_encoder_mode_fixup(struct drm_encoder *encoder,
......@@ -163,14 +184,23 @@ static irqreturn_t hpd_irq(int irq, void *data)
int tegra_output_probe(struct tegra_output *output)
{
struct device_node *ddc, *panel;
enum of_gpio_flags flags;
struct device_node *ddc;
size_t size;
int err;
if (!output->of_node)
output->of_node = output->dev->of_node;
panel = of_parse_phandle(output->of_node, "nvidia,panel", 0);
if (panel) {
output->panel = of_drm_find_panel(panel);
if (!output->panel)
return -EPROBE_DEFER;
of_node_put(panel);
}
output->edid = of_get_property(output->of_node, "nvidia,edid", &size);
ddc = of_parse_phandle(output->of_node, "nvidia,ddc-i2c-bus", 0);
......@@ -185,9 +215,6 @@ int tegra_output_probe(struct tegra_output *output)
of_node_put(ddc);
}
if (!output->edid && !output->ddc)
return -ENODEV;
output->hpd_gpio = of_get_named_gpio_flags(output->of_node,
"nvidia,hpd-gpio", 0,
&flags);
......@@ -267,6 +294,9 @@ int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
drm_connector_helper_add(&output->connector, &connector_helper_funcs);
output->connector.dpms = DRM_MODE_DPMS_OFF;
if (output->panel)
drm_panel_attach(output->panel, &output->connector);
drm_encoder_init(drm, &output->encoder, &encoder_funcs, encoder);
drm_encoder_helper_add(&output->encoder, &encoder_helper_funcs);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment