USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

This patch adds support for the TI CC3200 LaunchPad board, which uses a
custom USB vendor ID and product ID. Channel A is used for JTAG, and
channel B is used for a UART.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/ftdi_sio.c

@@ -1012,6 +1012,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
 	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
+	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/ftdi_sio_ids.h

@@ -595,6 +595,12 @@
 #define ATMEL_VID		0x03eb /* Vendor ID */
 #define STK541_PID		0x2109 /* Zigbee Controller */
 
+/*
+ * Texas Instruments
+ */
+#define TI_VID			0x0451
+#define TI_CC3200_LAUNCHPAD_PID	0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */
+
 /*
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice