Commit 9c61d6bc authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Refine phylib support

This patch refines the phylib support in the tg3 driver.  The patch does
the following things :

* Rename tg3_mdio_config() to tg3_mdio_config_5785().  The 5785 will be
  the only device that will use it so the name might as well reflect
  that.
* Fix a memory leak if mdiobus_register() fails.
* Add code to deal with phy device detection failures.
* Add code to correct the supported list of phy features based on the
  MAC <=> PHY interface.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0a459aac
......@@ -877,7 +877,7 @@ static int tg3_mdio_reset(struct mii_bus *bp)
return 0;
}
static void tg3_mdio_config(struct tg3 *tp)
static void tg3_mdio_config_5785(struct tg3 *tp)
{
u32 val;
......@@ -934,8 +934,9 @@ static void tg3_mdio_start(struct tg3 *tp)
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED)
tg3_mdio_config(tp);
if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tg3_mdio_config_5785(tp);
}
static void tg3_mdio_stop(struct tg3 *tp)
......@@ -989,14 +990,20 @@ static int tg3_mdio_init(struct tg3 *tp)
if (i) {
printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
tp->dev->name, i);
mdiobus_free(tp->mdio_bus);
return i;
}
tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
switch (phydev->phy_id) {
if (!phydev || !phydev->drv) {
printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
mdiobus_unregister(tp->mdio_bus);
mdiobus_free(tp->mdio_bus);
return -ENODEV;
}
switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
case TG3_PHY_ID_BCM50610:
phydev->interface = PHY_INTERFACE_MODE_RGMII;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
......@@ -1011,7 +1018,10 @@ static int tg3_mdio_init(struct tg3 *tp)
break;
}
tg3_mdio_config(tp);
tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tg3_mdio_config_5785(tp);
return 0;
}
......@@ -1351,12 +1361,25 @@ static int tg3_phy_init(struct tg3 *tp)
return PTR_ERR(phydev);
}
tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED;
/* Mask with MAC supported features. */
phydev->supported &= (PHY_GBIT_FEATURES |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
switch (phydev->interface) {
case PHY_INTERFACE_MODE_GMII:
case PHY_INTERFACE_MODE_RGMII:
phydev->supported &= (PHY_GBIT_FEATURES |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PHY_INTERFACE_MODE_MII:
phydev->supported &= (PHY_BASIC_FEATURES |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
default:
phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
return -EINVAL;
}
tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED;
phydev->advertising = phydev->supported;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment