Commit 9d6c1dc4 authored by Arend van Spriel's avatar Arend van Spriel Committed by Kalle Valo

brcmfmac: add dedicated debug level for firmware console logging

Both PCIe and SDIO devices have the possibility to log the firmware
console output in kernel log. For PCIe it is logged when PCIE debug
level is enabled. For SDIO it is logged when user specifies a non-zero
console interval through debugfs. This patch tries to make it a
bit more consistent. The firmware console output is only logged when
FWCON debug level is enabled.
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Reviewed-by: default avatarFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: default avatarPontus Fuchs <pontusf@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 291da87b
......@@ -37,6 +37,7 @@
#define BRCMF_SDIO_VAL 0x00020000
#define BRCMF_MSGBUF_VAL 0x00040000
#define BRCMF_PCIE_VAL 0x00080000
#define BRCMF_FWCON_VAL 0x00100000
/* set default print format */
#undef pr_fmt
......@@ -78,6 +79,7 @@ do { \
#define BRCMF_GLOM_ON() (brcmf_msg_level & BRCMF_GLOM_VAL)
#define BRCMF_EVENT_ON() (brcmf_msg_level & BRCMF_EVENT_VAL)
#define BRCMF_FIL_ON() (brcmf_msg_level & BRCMF_FIL_VAL)
#define BRCMF_FWCON_ON() (brcmf_msg_level & BRCMF_FWCON_VAL)
#else /* defined(DEBUG) || defined(CONFIG_BRCM_TRACING) */
......@@ -90,6 +92,7 @@ do { \
#define BRCMF_GLOM_ON() 0
#define BRCMF_EVENT_ON() 0
#define BRCMF_FIL_ON() 0
#define BRCMF_FWCON_ON() 0
#endif /* defined(DEBUG) || defined(CONFIG_BRCM_TRACING) */
......
......@@ -644,7 +644,7 @@ static void brcmf_pcie_bus_console_init(struct brcmf_pciedev_info *devinfo)
addr = console->base_addr + BRCMF_CONSOLE_BUFSIZE_OFFSET;
console->bufsize = brcmf_pcie_read_tcm32(devinfo, addr);
brcmf_dbg(PCIE, "Console: base %x, buf %x, size %d\n",
brcmf_dbg(FWCON, "Console: base %x, buf %x, size %d\n",
console->base_addr, console->buf_addr, console->bufsize);
}
......@@ -656,6 +656,9 @@ static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo)
u8 ch;
u32 newidx;
if (!BRCMF_FWCON_ON())
return;
console = &devinfo->shared.console;
addr = console->base_addr + BRCMF_CONSOLE_WRITEIDX_OFFSET;
newidx = brcmf_pcie_read_tcm32(devinfo, addr);
......@@ -677,7 +680,7 @@ static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo)
}
if (ch == '\n') {
console->log_str[console->log_idx] = 0;
brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str);
pr_debug("CONSOLE: %s", console->log_str);
console->log_idx = 0;
}
}
......
......@@ -123,6 +123,7 @@ struct rte_console {
#define BRCMF_FIRSTREAD (1 << 6)
#define BRCMF_CONSOLE 10 /* watchdog interval to poll console */
/* SBSDIO_DEVICE_CTL */
......@@ -3204,6 +3205,8 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
if (IS_ERR_OR_NULL(dentry))
return;
bus->console_interval = BRCMF_CONSOLE;
brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read);
brcmf_debugfs_add_entry(drvr, "counters",
brcmf_debugfs_sdio_count_read);
......@@ -3613,7 +3616,7 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
}
#ifdef DEBUG
/* Poll for console output periodically */
if (bus->sdiodev->state == BRCMF_SDIOD_DATA &&
if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
bus->console_interval != 0) {
bus->console.count += BRCMF_WD_POLL_MS;
if (bus->console.count >= bus->console_interval) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment