Commit 9d72af6e authored by Arnaud Patard (Rtp)'s avatar Arnaud Patard (Rtp) Committed by Sascha Hauer

efikamx: add usb h1 support

Now that usb has been fixed, we can enable usb h1 on efikamx
Signed-off-by: default avatarArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent 7ac18a38
...@@ -119,6 +119,7 @@ config MX51_EFIKA_COMMON ...@@ -119,6 +119,7 @@ config MX51_EFIKA_COMMON
select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
config MACH_MX51_EFIKAMX config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop" bool "Support MX51 Genesi Efika MX nettop"
......
...@@ -211,6 +211,20 @@ static void __init mx51_efikamx_init(void) ...@@ -211,6 +211,20 @@ static void __init mx51_efikamx_init(void)
gpio_request(EFIKAMX_RESET, "reset"); gpio_request(EFIKAMX_RESET, "reset");
gpio_direction_output(EFIKAMX_RESET, 1); gpio_direction_output(EFIKAMX_RESET, 1);
} }
/*
* enable wifi by default only on mx
* sb and mx have same wlan pin but the value to enable it are
* different :/
*/
gpio_request(EFIKA_WLAN_EN, "wlan_en");
gpio_direction_output(EFIKA_WLAN_EN, 0);
msleep(10);
gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
gpio_direction_output(EFIKA_WLAN_RESET, 0);
msleep(10);
gpio_set_value(EFIKA_WLAN_RESET, 1);
} }
static void __init mx51_efikamx_timer_init(void) static void __init mx51_efikamx_timer_init(void)
......
#ifndef _EFIKA_H #ifndef _EFIKA_H
#define _EFIKA_H #define _EFIKA_H
#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16)
#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10)
#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9)
void __init efika_board_common_init(void); void __init efika_board_common_init(void);
#endif #endif
...@@ -30,6 +30,10 @@ ...@@ -30,6 +30,10 @@
#include <mach/i2c.h> #include <mach/i2c.h>
#include <mach/mxc_ehci.h> #include <mach/mxc_ehci.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <mach/ulpi.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
...@@ -40,7 +44,12 @@ ...@@ -40,7 +44,12 @@
#include "devices.h" #include "devices.h"
#include "efika.h" #include "efika.h"
#define MX51_USB_PLL_DIV_24_MHZ 0x01 #define MX51_USB_CTRL_1_OFFSET 0x10
#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) #define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) #define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
...@@ -81,6 +90,29 @@ static iomux_v3_cfg_t mx51efika_pads[] = { ...@@ -81,6 +90,29 @@ static iomux_v3_cfg_t mx51efika_pads[] = {
MX51_PAD_CSPI1_SS1__GPIO4_25, MX51_PAD_CSPI1_SS1__GPIO4_25,
MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
MX51_PAD_USBH1_DIR__USBH1_DIR,
MX51_PAD_USBH1_NXT__USBH1_NXT,
MX51_PAD_USBH1_DATA0__USBH1_DATA0,
MX51_PAD_USBH1_DATA1__USBH1_DATA1,
MX51_PAD_USBH1_DATA2__USBH1_DATA2,
MX51_PAD_USBH1_DATA3__USBH1_DATA3,
MX51_PAD_USBH1_DATA4__USBH1_DATA4,
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
/* USB HUB RESET */
MX51_PAD_GPIO1_5__GPIO1_5,
/* WLAN */
MX51_PAD_EIM_A22__GPIO2_16,
MX51_PAD_EIM_A16__GPIO2_10,
/* USB PHY RESET */
MX51_PAD_EIM_D27__GPIO2_9,
}; };
/* Serial ports */ /* Serial ports */
...@@ -105,13 +137,13 @@ static int initialize_otg_port(struct platform_device *pdev) ...@@ -105,13 +137,13 @@ static int initialize_otg_port(struct platform_device *pdev)
/* Set the PHY clock to 19.2MHz */ /* Set the PHY clock to 19.2MHz */
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
v |= MX51_USB_PLL_DIV_24_MHZ; v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base); iounmap(usb_base);
mdelay(10); mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
} }
static struct mxc_usbh_platform_data dr_utmi_config = { static struct mxc_usbh_platform_data dr_utmi_config = {
...@@ -119,6 +151,73 @@ static struct mxc_usbh_platform_data dr_utmi_config = { ...@@ -119,6 +151,73 @@ static struct mxc_usbh_platform_data dr_utmi_config = {
.portsc = MXC_EHCI_UTMI_16BIT, .portsc = MXC_EHCI_UTMI_16BIT,
}; };
static int initialize_usbh1_port(struct platform_device *pdev)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
u32 v;
void __iomem *usb_base;
void __iomem *socregs_base;
mxc_iomux_v3_setup_pad(usbh1gpio);
gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
gpio_direction_output(EFIKAMX_USBH1_STP, 0);
msleep(1);
gpio_set_value(EFIKAMX_USBH1_STP, 1);
msleep(1);
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* The clock for the USBH1 ULPI port will come externally */
/* from the PHY. */
v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
socregs_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
gpio_free(EFIKAMX_USBH1_STP);
mxc_iomux_v3_setup_pad(usbh1stp);
mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
static void mx51_efika_hubreset(void)
{
gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
msleep(1);
gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
msleep(1);
gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
}
static void __init mx51_efika_usb(void)
{
mx51_efika_hubreset();
/* pulling it low, means no USB at all... */
gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
msleep(1);
gpio_set_value(EFIKA_USB_PHY_RESET, 1);
usbh1_config.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT |
ULPI_OTG_EXTVBUSIND);
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
mxc_register_device(&mxc_usbh1_device, &usbh1_config);
}
static struct mtd_partition mx51_efika_spi_nor_partitions[] = { static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
{ {
.name = "u-boot", .name = "u-boot",
...@@ -164,8 +263,8 @@ void __init efika_board_common_init(void) ...@@ -164,8 +263,8 @@ void __init efika_board_common_init(void)
{ {
mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
ARRAY_SIZE(mx51efika_pads)); ARRAY_SIZE(mx51efika_pads));
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
imx51_add_imx_uart(0, &uart_pdata); imx51_add_imx_uart(0, &uart_pdata);
mx51_efika_usb();
imx51_add_sdhci_esdhc_imx(0, NULL); imx51_add_sdhci_esdhc_imx(0, NULL);
spi_register_board_info(mx51_efika_spi_board_info, spi_register_board_info(mx51_efika_spi_board_info,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment