octeontx2-af: advertised link modes support on cgx

CGX supports setting advertised link modes on physical link.
This patch adds support to derive cgx mode from ethtool
link mode and pass it to firmware to configure the same.
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/af/cgx.c

@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/of.h>
 #include <linux/of_mdio.h>
@@ -646,6 +647,7 @@ static inline void cgx_link_usertable_init(void)
 	cgx_speed_mbps[CGX_LINK_25G] = 25000;
 	cgx_speed_mbps[CGX_LINK_40G] = 40000;
 	cgx_speed_mbps[CGX_LINK_50G] = 50000;
+	cgx_speed_mbps[CGX_LINK_80G] = 80000;
 	cgx_speed_mbps[CGX_LINK_100G] = 100000;
 
 	cgx_lmactype_string[LMAC_MODE_SGMII] = "SGMII";
@@ -693,6 +695,110 @@ static int cgx_link_usertable_index_map(int speed)
 	return CGX_LINK_NONE;
 }
 
+static void set_mod_args(struct cgx_set_link_mode_args *args,
+			 u32 speed, u8 duplex, u8 autoneg, u64 mode)
+{
+	/* Fill default values incase of user did not pass
+	 * valid parameters
+	 */
+	if (args->duplex == DUPLEX_UNKNOWN)
+		args->duplex = duplex;
+	if (args->speed == SPEED_UNKNOWN)
+		args->speed = speed;
+	if (args->an == AUTONEG_UNKNOWN)
+		args->an = autoneg;
+	args->mode = mode;
+	args->ports = 0;
+}
+
+static void otx2_map_ethtool_link_modes(u64 bitmask,
+					struct cgx_set_link_mode_args *args)
+{
+	switch (bitmask) {
+	case ETHTOOL_LINK_MODE_10baseT_Half_BIT:
+		set_mod_args(args, 10, 1, 1, BIT_ULL(CGX_MODE_SGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_10baseT_Full_BIT:
+		set_mod_args(args, 10, 0, 1, BIT_ULL(CGX_MODE_SGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_100baseT_Half_BIT:
+		set_mod_args(args, 100, 1, 1, BIT_ULL(CGX_MODE_SGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_100baseT_Full_BIT:
+		set_mod_args(args, 100, 0, 1, BIT_ULL(CGX_MODE_SGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_1000baseT_Half_BIT:
+		set_mod_args(args, 1000, 1, 1, BIT_ULL(CGX_MODE_SGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_1000baseT_Full_BIT:
+		set_mod_args(args, 1000, 0, 1, BIT_ULL(CGX_MODE_SGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_1000baseX_Full_BIT:
+		set_mod_args(args, 1000, 0, 0, BIT_ULL(CGX_MODE_1000_BASEX));
+		break;
+	case  ETHTOOL_LINK_MODE_10000baseT_Full_BIT:
+		set_mod_args(args, 1000, 0, 1, BIT_ULL(CGX_MODE_QSGMII));
+		break;
+	case  ETHTOOL_LINK_MODE_10000baseSR_Full_BIT:
+		set_mod_args(args, 10000, 0, 0, BIT_ULL(CGX_MODE_10G_C2C));
+		break;
+	case  ETHTOOL_LINK_MODE_10000baseLR_Full_BIT:
+		set_mod_args(args, 10000, 0, 0, BIT_ULL(CGX_MODE_10G_C2M));
+		break;
+	case  ETHTOOL_LINK_MODE_10000baseKR_Full_BIT:
+		set_mod_args(args, 10000, 0, 1, BIT_ULL(CGX_MODE_10G_KR));
+		break;
+	case  ETHTOOL_LINK_MODE_25000baseSR_Full_BIT:
+		set_mod_args(args, 25000, 0, 0, BIT_ULL(CGX_MODE_25G_C2C));
+		break;
+	case  ETHTOOL_LINK_MODE_25000baseCR_Full_BIT:
+		set_mod_args(args, 25000, 0, 1, BIT_ULL(CGX_MODE_25G_CR));
+		break;
+	case  ETHTOOL_LINK_MODE_25000baseKR_Full_BIT:
+		set_mod_args(args, 25000, 0, 1, BIT_ULL(CGX_MODE_25G_KR));
+		break;
+	case  ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT:
+		set_mod_args(args, 40000, 0, 0, BIT_ULL(CGX_MODE_40G_C2C));
+		break;
+	case  ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT:
+		set_mod_args(args, 40000, 0, 0, BIT_ULL(CGX_MODE_40G_C2M));
+		break;
+	case  ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT:
+		set_mod_args(args, 40000, 0, 1, BIT_ULL(CGX_MODE_40G_CR4));
+		break;
+	case  ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT:
+		set_mod_args(args, 40000, 0, 1, BIT_ULL(CGX_MODE_40G_KR4));
+		break;
+	case  ETHTOOL_LINK_MODE_50000baseSR_Full_BIT:
+		set_mod_args(args, 50000, 0, 0, BIT_ULL(CGX_MODE_50G_C2C));
+		break;
+	case  ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT:
+		set_mod_args(args, 50000, 0, 0, BIT_ULL(CGX_MODE_50G_C2M));
+		break;
+	case  ETHTOOL_LINK_MODE_50000baseCR_Full_BIT:
+		set_mod_args(args, 50000, 0, 1, BIT_ULL(CGX_MODE_50G_CR));
+		break;
+	case  ETHTOOL_LINK_MODE_50000baseKR_Full_BIT:
+		set_mod_args(args, 50000, 0, 1, BIT_ULL(CGX_MODE_50G_KR));
+		break;
+	case  ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT:
+		set_mod_args(args, 100000, 0, 0, BIT_ULL(CGX_MODE_100G_C2C));
+		break;
+	case  ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT:
+		set_mod_args(args, 100000, 0, 0, BIT_ULL(CGX_MODE_100G_C2M));
+		break;
+	case  ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT:
+		set_mod_args(args, 100000, 0, 1, BIT_ULL(CGX_MODE_100G_CR4));
+		break;
+	case  ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT:
+		set_mod_args(args, 100000, 0, 1, BIT_ULL(CGX_MODE_100G_KR4));
+		break;
+	default:
+		set_mod_args(args, 0, 1, 0, BIT_ULL(CGX_MODE_MAX));
+		break;
+	}
+}
+
 static inline void link_status_user_format(u64 lstat,
 					   struct cgx_link_user_info *linfo,
 					   struct cgx *cgx, u8 lmac_id)
@@ -887,13 +993,19 @@ int cgx_set_link_mode(void *cgxd, struct cgx_set_link_mode_args args,
 	if (!cgx)
 		return -ENODEV;
 
+	if (args.mode)
+		otx2_map_ethtool_link_modes(args.mode, &args);
+	if (!args.speed && args.duplex && !args.an)
+		return -EINVAL;
+
 	req = FIELD_SET(CMDREG_ID, CGX_CMD_MODE_CHANGE, req);
 	req = FIELD_SET(CMDMODECHANGE_SPEED,
 			cgx_link_usertable_index_map(args.speed), req);
 	req = FIELD_SET(CMDMODECHANGE_DUPLEX, args.duplex, req);
 	req = FIELD_SET(CMDMODECHANGE_AN, args.an, req);
 	req = FIELD_SET(CMDMODECHANGE_PORT, args.ports, req);
-	req = FIELD_SET(CMDMODECHANGE_FLAGS, args.flags, req);
+	req = FIELD_SET(CMDMODECHANGE_FLAGS, args.mode, req);
+
 	return cgx_fwi_cmd_generic(req, &resp, cgx, lmac_id);
 }
 int cgx_set_fec(u64 fec, int cgx_id, int lmac_id)

drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h

@@ -70,6 +70,36 @@ enum cgx_link_speed {
 	CGX_LINK_SPEED_MAX,
 };
 
+enum CGX_MODE_ {
+	CGX_MODE_SGMII,
+	CGX_MODE_1000_BASEX,
+	CGX_MODE_QSGMII,
+	CGX_MODE_10G_C2C,
+	CGX_MODE_10G_C2M,
+	CGX_MODE_10G_KR,
+	CGX_MODE_20G_C2C,
+	CGX_MODE_25G_C2C,
+	CGX_MODE_25G_C2M,
+	CGX_MODE_25G_2_C2C,
+	CGX_MODE_25G_CR,
+	CGX_MODE_25G_KR,
+	CGX_MODE_40G_C2C,
+	CGX_MODE_40G_C2M,
+	CGX_MODE_40G_CR4,
+	CGX_MODE_40G_KR4,
+	CGX_MODE_40GAUI_C2C,
+	CGX_MODE_50G_C2C,
+	CGX_MODE_50G_C2M,
+	CGX_MODE_50G_4_C2C,
+	CGX_MODE_50G_CR,
+	CGX_MODE_50G_KR,
+	CGX_MODE_80GAUI_C2C,
+	CGX_MODE_100G_C2C,
+	CGX_MODE_100G_C2M,
+	CGX_MODE_100G_CR4,
+	CGX_MODE_100G_KR4,
+	CGX_MODE_MAX /* = 29 */
+};
 /* REQUEST ID types. Input to firmware */
 enum cgx_cmd_id {
 	CGX_CMD_NONE,
@@ -231,6 +261,6 @@ struct cgx_lnk_sts {
 #define CMDMODECHANGE_DUPLEX		GENMASK_ULL(12, 12)
 #define CMDMODECHANGE_AN		GENMASK_ULL(13, 13)
 #define CMDMODECHANGE_PORT		GENMASK_ULL(21, 14)
-#define CMDMODECHANGE_FLAGS		GENMASK_ULL(29, 22)
+#define CMDMODECHANGE_FLAGS		GENMASK_ULL(63, 22)
 
 #endif /* __CGX_FW_INTF_H__ */

drivers/net/ethernet/marvell/octeontx2/af/mbox.h

@@ -464,10 +464,11 @@ struct cgx_set_link_mode_args {
 	u8 duplex;
 	u8 an;
 	u8 ports;
-	u8 flags;
+	u64 mode;
 };
 
 struct cgx_set_link_mode_req {
+#define AUTONEG_UNKNOWN		0xff
 	struct mbox_msghdr hdr;
 	struct cgx_set_link_mode_args args;
 };