perf/x86/intel/uncore: Fix PCI BDF address of M3UPI on SKX

The counters on M3UPI Link 0 and Link 3 don't count properly, and writing
0 to these counters may causes system crash on some machines.

The PCI BDF addresses of the M3UPI in the current code are incorrect.

The correct addresses should be:

  D18:F1	0x204D
  D18:F2	0x204E
  D18:F5	0x204D
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: cd34cd97 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Link: http://lkml.kernel.org/r/1537538826-55489-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/events/intel/uncore_snbep.c

@@ -3931,16 +3931,16 @@ static const struct pci_device_id skx_uncore_pci_ids[] = {
 		.driver_data = UNCORE_PCI_DEV_FULL_DATA(21, 5, SKX_PCI_UNCORE_M2PCIE, 3),
 	},
 	{ /* M3UPI0 Link 0 */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C),
-		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 0, SKX_PCI_UNCORE_M3UPI, 0),
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 0),
 	},
 	{ /* M3UPI0 Link 1 */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
-		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 1),
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204E),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 2, SKX_PCI_UNCORE_M3UPI, 1),
 	},
 	{ /* M3UPI1 Link 2 */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C),
-		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 4, SKX_PCI_UNCORE_M3UPI, 2),
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 5, SKX_PCI_UNCORE_M3UPI, 2),
 	},
 	{ /* end: all zeroes */ }
 };