Merge tag 'usb-ci-v4.10-rc1' of...

Merge tag 'usb-ci-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

Peter writes:

- Adding ULPI PHY support for imx53
- Properly mark little endian descriptors for udc

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -18,6 +18,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
 #include <linux/clk.h>
 
 #include "ci.h"
@@ -146,6 +147,9 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 	if (of_find_property(np, "external-vbus-divider", NULL))
 		data->evdo = 1;
 
+	if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
+		data->ulpi = 1;
+
 	return data;
 }
 

drivers/usb/chipidea/ci_hdrc_imx.h

@@ -19,6 +19,7 @@ struct imx_usbmisc_data {
 	unsigned int disable_oc:1; /* over current detect disabled */
 	unsigned int oc_polarity:1; /* over current polarity if oc enabled */
 	unsigned int evdo:1; /* set external vbus divider option */
+	unsigned int ulpi:1; /* connected to an ULPI phy */
 };
 
 int imx_usbmisc_init(struct imx_usbmisc_data *);

drivers/usb/chipidea/udc.c

@@ -365,7 +365,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 		if (hwreq->req.length == 0
 				|| hwreq->req.length % hwep->ep.maxpacket)
 			mul++;
-		node->ptr->token |= mul << __ffs(TD_MULTO);
+		node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
 	}
 
 	temp = (u32) (hwreq->req.dma + hwreq->req.actual);
@@ -504,7 +504,7 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 		if (hwreq->req.length == 0
 				|| hwreq->req.length % hwep->ep.maxpacket)
 			mul++;
-		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
+		hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
 	}
 
 	ret = hw_ep_prime(ci, hwep->num, hwep->dir,
@@ -529,7 +529,7 @@ static void free_pending_td(struct ci_hw_ep *hwep)
 static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
 					   struct td_node *node)
 {
-	hwep->qh.ptr->td.next = node->dma;
+	hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
 	hwep->qh.ptr->td.token &=
 		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
 

drivers/usb/chipidea/udc.h

@@ -22,11 +22,11 @@
 /* DMA layout of transfer descriptors */
 struct ci_hw_td {
 	/* 0 */
-	u32 next;
+	__le32 next;
 #define TD_TERMINATE          BIT(0)
 #define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
 	/* 1 */
-	u32 token;
+	__le32 token;
 #define TD_STATUS             (0x00FFUL <<  0)
 #define TD_STATUS_TR_ERR      BIT(3)
 #define TD_STATUS_DT_ERR      BIT(5)
@@ -36,7 +36,7 @@ struct ci_hw_td {
 #define TD_IOC                BIT(15)
 #define TD_TOTAL_BYTES        (0x7FFFUL << 16)
 	/* 2 */
-	u32 page[5];
+	__le32 page[5];
 #define TD_CURR_OFFSET        (0x0FFFUL <<  0)
 #define TD_FRAME_NUM          (0x07FFUL <<  0)
 #define TD_RESERVED_MASK      (0x0FFFUL <<  0)
@@ -45,18 +45,18 @@ struct ci_hw_td {
 /* DMA layout of queue heads */
 struct ci_hw_qh {
 	/* 0 */
-	u32 cap;
+	__le32 cap;
 #define QH_IOS                BIT(15)
 #define QH_MAX_PKT            (0x07FFUL << 16)
 #define QH_ZLT                BIT(29)
 #define QH_MULT               (0x0003UL << 30)
 #define QH_ISO_MULT(x)		((x >> 11) & 0x03)
 	/* 1 */
-	u32 curr;
+	__le32 curr;
 	/* 2 - 8 */
 	struct ci_hw_td		td;
 	/* 9 */
-	u32 RESERVED;
+	__le32 RESERVED;
 	struct usb_ctrlrequest   setup;
 } __attribute__ ((packed, aligned(4)));
 

drivers/usb/chipidea/usbmisc_imx.c

@@ -46,11 +46,23 @@
 
 #define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08
 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET	0x0c
+#define MX53_USB_CTRL_1_OFFSET	        0x10
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
 #define MX53_USB_UH2_CTRL_OFFSET	0x14
 #define MX53_USB_UH3_CTRL_OFFSET	0x18
+#define MX53_USB_CLKONOFF_CTRL_OFFSET	0x24
+#define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
+#define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
 #define MX53_BM_OVER_CUR_DIS_H1		BIT(5)
 #define MX53_BM_OVER_CUR_DIS_OTG	BIT(8)
 #define MX53_BM_OVER_CUR_DIS_UHx	BIT(30)
+#define MX53_USB_CTRL_1_UH2_ULPI_EN	BIT(26)
+#define MX53_USB_CTRL_1_UH3_ULPI_EN	BIT(27)
+#define MX53_USB_UHx_CTRL_WAKE_UP_EN	BIT(7)
+#define MX53_USB_UHx_CTRL_ULPI_INT_EN	BIT(8)
 #define MX53_USB_PHYCTRL1_PLLDIV_MASK	0x3
 #define MX53_USB_PLL_DIV_24_MHZ		0x01
 
@@ -199,30 +211,76 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 	val |= MX53_USB_PLL_DIV_24_MHZ;
 	writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
 
-	if (data->disable_oc) {
 	spin_lock_irqsave(&usbmisc->lock, flags);
+
 	switch (data->index) {
 	case 0:
+		if (data->disable_oc) {
 			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
 			val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
+			writel(val, reg);
+		}
 		break;
 	case 1:
+		if (data->disable_oc) {
 			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
 			val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
+			writel(val, reg);
+		}
 		break;
 	case 2:
+		if (data->ulpi) {
+			/* set USBH2 into ULPI-mode. */
+			reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+			val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
+			/* select ULPI clock */
+			val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
+			val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
+			writel(val, reg);
+			/* Set interrupt wake up enable */
+			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+				| MX53_USB_UHx_CTRL_ULPI_INT_EN;
+			writel(val, reg);
+			/* Disable internal 60Mhz clock */
+			reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
+			writel(val, reg);
+		}
+		if (data->disable_oc) {
 			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
 			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+			writel(val, reg);
+		}
 		break;
 	case 3:
+		if (data->ulpi) {
+			/* set USBH3 into ULPI-mode. */
+			reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+			val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
+			/* select ULPI clock */
+			val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
+			val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
+			writel(val, reg);
+			/* Set interrupt wake up enable */
+			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+				| MX53_USB_UHx_CTRL_ULPI_INT_EN;
+			writel(val, reg);
+			/* Disable internal 60Mhz clock */
+			reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
+			val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
+			writel(val, reg);
+		}
+		if (data->disable_oc) {
 			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
 			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
+			writel(val, reg);
+		}
 		break;
 	}
-		if (reg && val)
-			writel(val, reg);
+
 	spin_unlock_irqrestore(&usbmisc->lock, flags);
-	}
 
 	return 0;
 }