Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/kernel/vmlinux.lds.S

@@ -89,13 +89,6 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	. = ALIGN(16);
-	__ex_table : {			/* Exception table		*/
-		__start___ex_table = .;
-			*(__ex_table)
-		__stop___ex_table = .;
-	}
-
 	RODATA
 
 	_etext = .;			/* End of text and rodata section */
@@ -137,6 +130,14 @@ SECTIONS
 		. = ALIGN(32);
 		*(.data.cacheline_aligned)
 
+		/*
+		 * The exception fixup table (might need resorting at runtime)
+		 */
+		. = ALIGN(32);
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+
 		/*
 		 * and the usual data section
 		 */

arch/arm/mach-l7200/core.c

@@ -7,11 +7,17 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
 
+#include <asm/types.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/page.h>
 
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/irq.h>
 
 /*
  * IRQ base register
@@ -48,6 +54,12 @@ static void l7200_unmask_irq(unsigned int irq)
 	IRQ_ENABLE = 1 << irq;
 }
 
+static struct irqchip l7200_irq_chip = {
+	.ack		= l7200_mask_irq,
+	.mask		= l7200_mask_irq,
+	.unmask		= l7200_unmask_irq
+};
+ 
 static void __init l7200_init_irq(void)
 {
 	int irq;
@@ -56,11 +68,9 @@ static void __init l7200_init_irq(void)
 	FIQ_ENABLECLEAR = 0xffffffff;	/* clear all fast interrupt enables */
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_desc[irq].valid	= 1;
-		irq_desc[irq].probe_ok	= 1;
-		irq_desc[irq].mask_ack	= l7200_mask_irq;
-		irq_desc[irq].mask	= l7200_mask_irq;
-		irq_desc[irq].unmask	= l7200_unmask_irq;
+		set_irq_chip(irq, &l7200_irq_chip);
+		set_irq_flags(irq, IRQF_VALID);
+		set_irq_handler(irq, do_level_IRQ);
 	}
 
 	init_FIQ();

arch/arm/mach-pxa/corgi_lcd.c

@@ -467,6 +467,7 @@ void corgi_put_hsync(void)
 {
 	if (get_hsync_time)
 		symbol_put(w100fb_get_hsynclen);
+	get_hsync_time = NULL;
 }
 
 void corgi_wait_hsync(void)
@@ -476,20 +477,37 @@ void corgi_wait_hsync(void)
 #endif
 
 #ifdef CONFIG_PXA_SHARP_Cxx00
+static struct device *spitz_pxafb_dev;
+
+static int is_pxafb_device(struct device * dev, void * data)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+
+	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
+}
+
 unsigned long spitz_get_hsync_len(void)
 {
+	if (!spitz_pxafb_dev) {
+		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
+		if (!spitz_pxafb_dev)
+			return 0;
+	}
 	if (!get_hsync_time)
 		get_hsync_time = symbol_get(pxafb_get_hsync_time);
 	if (!get_hsync_time)
 		return 0;
 
-	return pxafb_get_hsync_time(&pxafb_device.dev);
+	return pxafb_get_hsync_time(spitz_pxafb_dev);
 }
 
 void spitz_put_hsync(void)
 {
+	put_device(spitz_pxafb_dev);
 	if (get_hsync_time)
 		symbol_put(pxafb_get_hsync_time);
+	spitz_pxafb_dev = NULL;
+	get_hsync_time = NULL;
 }
 
 void spitz_wait_hsync(void)

arch/arm/mach-pxa/generic.c

@@ -208,6 +208,11 @@ static struct platform_device pxafb_device = {
 	.resource	= pxafb_resources,
 };
 
+void __init set_pxa_fb_parent(struct device *parent_dev)
+{
+	pxafb_device.dev.parent = parent_dev;
+}
+
 static struct platform_device ffuart_device = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,

arch/arm/mach-pxa/spitz.c

@@ -36,7 +36,6 @@
 #include <asm/arch/irq.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
-#include <asm/arch/ohci.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/spitz.h>
@@ -304,7 +303,6 @@ static struct platform_device *devices[] __initdata = {
 	&spitzkbd_device,
 	&spitzts_device,
 	&spitzbl_device,
-	&spitzbattery_device,
 };
 
 static void __init common_init(void)
@@ -328,7 +326,7 @@ static void __init common_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
-	pxafb_device.dev.parent = &spitzssp_device.dev;
+	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
 }
 

arch/arm/mach-s3c2410/Kconfig

@@ -12,6 +12,7 @@ config MACH_ANUBIS
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)

drivers/input/keyboard/spitzkbd.c

@@ -53,7 +53,7 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
 	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
 	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
 	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
 	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
 	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
 	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */

include/asm-arm/arch-pxa/pxafb.h

@@ -66,4 +66,5 @@ struct pxafb_mach_info {
 
 };
 void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
 unsigned long pxafb_get_hsync_time(struct device *dev);

include/asm-arm/arch-s3c2410/io.h

@@ -9,7 +9,7 @@
  *  06-Dec-1997	RMK	Created.
  *  02-Sep-2003 BJD	Modified for S3C2410
  *  10-Mar-2005 LCVR	Changed S3C2410_VA to S3C24XX_VA
- *
+ *  13-Oct-2005 BJD	Fixed problems with LDRH/STRH offset range
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
@@ -117,11 +117,23 @@ DECLARE_IO(int,l,"")
 #define __outwc(value,port)						\
 ({									\
 	unsigned long v = value;					\
-	if (__PORT_PCIO((port)))					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256)			\
 			__asm__ __volatile__(				\
 			"strh	%0, [%1, %2]	@ outwc"		\
 			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			     "Jr" (((port) & 0xff)));			\
 		else							\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, #0]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + (port)));			\
+	} else								\
 		__asm__ __volatile__(					\
 		"strh	%0, [%1, #0]	@ outwc"			\
 		: : "r" (v), "r" ((port)));				\
@@ -130,11 +142,25 @@ DECLARE_IO(int,l,"")
 #define __inwc(port)							\
 ({									\
 	unsigned short result;						\
-	if (__PORT_PCIO((port)))					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256 )			\
 			__asm__ __volatile__(				\
 			"ldrh	%0, [%1, %2]	@ inwc"			\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE),				\
+			  "Jr" ((port)));				\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			  "Jr" (((port) & 0xff)));			\
 		else							\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, #0]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port))));			\
+	} else								\
 		__asm__ __volatile__(					\
 		"ldrh	%0, [%1, #0]	@ inwc"				\
 		: "=r" (result) : "r" ((port)));			\