bnx2x: ethtool publishes link partners speed and FC

Following the changes in the ethtool source code, this patch enables
the bnx2x driver to publish the Link partner's capabilities s, when ethtool
is used on an interface which completed autoneg.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -246,6 +246,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	else
 		cmd->autoneg = AUTONEG_DISABLE;
 
+	/* Publish LP advertised speeds and FC */
+	if (bp->link_vars.link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
+		u32 status = bp->link_vars.link_status;
+
+		cmd->lp_advertising |= ADVERTISED_Autoneg;
+		if (status & LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE)
+			cmd->lp_advertising |= ADVERTISED_Pause;
+		if (status & LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
+			cmd->lp_advertising |= ADVERTISED_Asym_Pause;
+
+		if (status & LINK_STATUS_LINK_PARTNER_10THD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_10baseT_Half;
+		if (status & LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_10baseT_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_100baseT_Half;
+		if (status & LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_100baseT_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_1000baseT_Half;
+		if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_1000baseT_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
+		if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
+			cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
+	}
+
 	cmd->maxtxpkt = 0;
 	cmd->maxrxpkt = 0;
 
@@ -1415,12 +1443,19 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+	int cfg_reg;
+
 	epause->autoneg = (bp->link_params.req_flow_ctrl[cfg_idx] ==
 			   BNX2X_FLOW_CTRL_AUTO);
 
-	epause->rx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) ==
+	if (!epause->autoneg)
+		cfg_reg = bp->link_vars.flow_ctrl;
+	else
+		cfg_reg = bp->link_params.req_fc_auto_adv;
+
+	epause->rx_pause = ((cfg_reg & BNX2X_FLOW_CTRL_RX) ==
 			    BNX2X_FLOW_CTRL_RX);
-	epause->tx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) ==
+	epause->tx_pause = ((cfg_reg & BNX2X_FLOW_CTRL_TX) ==
 			    BNX2X_FLOW_CTRL_TX);
 
 	DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h

@@ -6406,6 +6406,7 @@
 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC		0x0800
 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH		0x0C00
 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK		0x0C00
+#define MDIO_CL73_IEEEB1_AN_LP_ADV2			0x04
 
 #define MDIO_REG_BANK_RX0				0x80b0
 #define MDIO_RX0_RX_STATUS				0x10
@@ -6800,6 +6801,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_ADV 		0x0011
 #define MDIO_AN_REG_ADV2		0x0012
 #define MDIO_AN_REG_LP_AUTO_NEG		0x0013
+#define MDIO_AN_REG_LP_AUTO_NEG2	0x0014
 #define MDIO_AN_REG_MASTER_STATUS	0x0021
 /*bcm*/
 #define MDIO_AN_REG_LINK_STATUS 	0x8304
@@ -6807,6 +6809,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_CL37_AN		0xffe0
 #define MDIO_AN_REG_CL37_FC_LD		0xffe4
 #define		MDIO_AN_REG_CL37_FC_LP		0xffe5
+#define		MDIO_AN_REG_1000T_STATUS	0xffea
 
 #define MDIO_AN_REG_8073_2_5G		0x8329
 #define MDIO_AN_REG_8073_BAM		0x8350
@@ -6971,6 +6974,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_WC_REG_SERDESDIGITAL_MISC1			0x8308
 #define MDIO_WC_REG_SERDESDIGITAL_MISC2			0x8309
 #define MDIO_WC_REG_DIGITAL3_UP1			0x8329
+#define MDIO_WC_REG_DIGITAL3_LP_UP1			 0x832c
 #define MDIO_WC_REG_DIGITAL4_MISC3			0x833c
 #define MDIO_WC_REG_DIGITAL5_MISC6			0x8345
 #define MDIO_WC_REG_DIGITAL5_MISC7			0x8349