Commit 9e84ed63 authored by Russell King's avatar Russell King

ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions"

Partially revert e69edc7, which introduced automatic zreladdr
support.  The change in the way the manual definition is defined
seems to be error and conflict prone.  Go back to the original way
we were handling this for the time being, while keeping the automatic
zreladdr facility.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent de9ea203
......@@ -1576,97 +1576,6 @@ config AUTO_ZRELADDR
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
config ZRELADDR
hex "Physical address of the decompressed kernel image"
depends on !AUTO_ZRELADDR
default 0x00008000 if ARCH_BCMRING ||\
ARCH_CNS3XXX ||\
ARCH_DOVE ||\
ARCH_EBSA110 ||\
ARCH_FOOTBRIDGE ||\
ARCH_INTEGRATOR ||\
ARCH_IOP13XX ||\
ARCH_IOP33X ||\
ARCH_IXP2000 ||\
ARCH_IXP23XX ||\
ARCH_IXP4XX ||\
ARCH_KIRKWOOD ||\
ARCH_KS8695 ||\
ARCH_LOKI ||\
ARCH_MMP ||\
ARCH_MV78XX0 ||\
ARCH_NOMADIK ||\
ARCH_NUC93X ||\
ARCH_NS9XXX ||\
ARCH_ORION5X ||\
ARCH_SPEAR3XX ||\
ARCH_SPEAR6XX ||\
ARCH_TEGRA ||\
ARCH_U8500 ||\
ARCH_VERSATILE ||\
ARCH_W90X900
default 0x08008000 if ARCH_MX1 ||\
ARCH_SHARK
default 0x10008000 if ARCH_MSM ||\
ARCH_OMAP1 ||\
ARCH_RPC
default 0x20008000 if ARCH_S5P6440 ||\
ARCH_S5P6442 ||\
ARCH_S5PC100 ||\
ARCH_S5PV210
default 0x30008000 if ARCH_S3C2410 ||\
ARCH_S3C2400 ||\
ARCH_S3C2412 ||\
ARCH_S3C2416 ||\
ARCH_S3C2440 ||\
ARCH_S3C2443
default 0x40008000 if ARCH_STMP378X ||\
ARCH_STMP37XX ||\
ARCH_SH7372 ||\
ARCH_SH7377 ||\
ARCH_S5PV310
default 0x50008000 if ARCH_S3C64XX ||\
ARCH_SH7367
default 0x60008000 if ARCH_VEXPRESS
default 0x80008000 if ARCH_MX25 ||\
ARCH_MX3 ||\
ARCH_NETX ||\
ARCH_OMAP2PLUS ||\
ARCH_PNX4008
default 0x90008000 if ARCH_MX5 ||\
ARCH_MX91231
default 0xa0008000 if ARCH_IOP32X ||\
ARCH_PXA ||\
MACH_MX27
default 0xc0008000 if ARCH_LH7A40X ||\
MACH_MX21
default 0xf0008000 if ARCH_AAEC2000 ||\
ARCH_L7200
default 0xc0028000 if ARCH_CLPS711X
default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
default 0xc0208000 if ARCH_SA1100 && SA1111
default 0xc0008000 if ARCH_SA1100 && !SA1111
default 0x30108000 if ARCH_S3C2410 && PM_H1940
default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
help
ZRELADDR is the physical address where the decompressed kernel
image will be placed. ZRELADDR has to be specified when the
assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
selected.
endmenu
menu "CPU Power Management"
......
......@@ -14,16 +14,18 @@
MKIMAGE := $(srctree)/scripts/mkuboot.sh
ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
include $(srctree)/$(MACHINE)/Makefile.boot
endif
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
ZRELADDR := $(zreladdr-y)
PARAMS_PHYS := $(params_phys-y)
INITRD_PHYS := $(initrd_phys-y)
export INITRD_PHYS PARAMS_PHYS
export ZRELADDR INITRD_PHYS PARAMS_PHYS
targets := Image zImage xipImage bootpImage uImage
......@@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE $@
ifeq ($(CONFIG_ZBOOT_ROM),y)
$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
else
$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
......
......@@ -79,6 +79,10 @@ endif
EXTRA_CFLAGS := -fpic -fno-builtin
EXTRA_AFLAGS := -Wa,-march=all
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
......
......@@ -177,7 +177,7 @@ not_angel:
and r4, pc, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =CONFIG_ZRELADDR
ldr r4, =zreladdr
#endif
subs r0, r0, r1 @ calculate the delta offset
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment