Commit 9ec76fbf authored by Matthew Wilcox's avatar Matthew Wilcox Committed by James Bottomley

[SCSI] qlogicpti: Add a slave_configure method

By configuring targets in slave_configure, we can eliminate a shadow
queuecommand, a shadow scsi_done, a write to the host template, abuse of
SCp->Message and SCp->Status, a use of kmap_atomic() and sniffing the
results of INQUIRY.
Signed-off-by: default avatarMatthew Wilcox <willy@linux.intel.com>
Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 50865c1d
...@@ -310,8 +310,6 @@ static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti) ...@@ -310,8 +310,6 @@ static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti)
} }
qpti->dev_param[i].device_enable = 1; qpti->dev_param[i].device_enable = 1;
} }
/* this is very important to set! */
qpti->sbits = 1 << qpti->scsi_id;
} }
static int qlogicpti_reset_hardware(struct Scsi_Host *host) static int qlogicpti_reset_hardware(struct Scsi_Host *host)
...@@ -951,153 +949,35 @@ static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int ...@@ -951,153 +949,35 @@ static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int
host->sg_tablesize = QLOGICPTI_MAX_SG(num_free); host->sg_tablesize = QLOGICPTI_MAX_SG(num_free);
} }
static unsigned int scsi_rbuf_get(struct scsi_cmnd *cmd, unsigned char **buf_out) static int qlogicpti_slave_configure(struct scsi_device *sdev)
{ {
unsigned char *buf; struct qlogicpti *qpti = shost_priv(sdev->host);
unsigned int buflen; int tgt = sdev->id;
u_short param[6];
if (cmd->use_sg) {
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
buflen = sg->length;
} else {
buf = cmd->request_buffer;
buflen = cmd->request_bufflen;
}
*buf_out = buf;
return buflen;
}
static void scsi_rbuf_put(struct scsi_cmnd *cmd, unsigned char *buf)
{
if (cmd->use_sg) {
struct scatterlist *sg;
sg = (struct scatterlist *) cmd->request_buffer;
kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
}
/*
* Until we scan the entire bus with inquiries, go throught this fella...
*/
static void ourdone(struct scsi_cmnd *Cmnd)
{
struct qlogicpti *qpti = (struct qlogicpti *) Cmnd->device->host->hostdata;
int tgt = Cmnd->device->id;
void (*done) (struct scsi_cmnd *);
/* This grot added by DaveM, blame him for ugliness.
* The issue is that in the 2.3.x driver we use the
* host_scribble portion of the scsi command as a
* completion linked list at interrupt service time,
* so we have to store the done function pointer elsewhere.
*/
done = (void (*)(struct scsi_cmnd *))
(((unsigned long) Cmnd->SCp.Message)
#ifdef __sparc_v9__
| ((unsigned long) Cmnd->SCp.Status << 32UL)
#endif
);
if ((qpti->sbits & (1 << tgt)) == 0) {
int ok = host_byte(Cmnd->result) == DID_OK;
if (Cmnd->cmnd[0] == 0x12 && ok) {
unsigned char *iqd;
unsigned int iqd_len;
iqd_len = scsi_rbuf_get(Cmnd, &iqd);
/* tags handled in midlayer */ /* tags handled in midlayer */
/* enable sync mode? */ /* enable sync mode? */
if (iqd[7] & 0x10) { if (sdev->sdtr) {
qpti->dev_param[tgt].device_flags |= 0x10; qpti->dev_param[tgt].device_flags |= 0x10;
} else { } else {
qpti->dev_param[tgt].synchronous_offset = 0; qpti->dev_param[tgt].synchronous_offset = 0;
qpti->dev_param[tgt].synchronous_period = 0; qpti->dev_param[tgt].synchronous_period = 0;
} }
/* are we wide capable? */ /* are we wide capable? */
if (iqd[7] & 0x20) { if (sdev->wdtr)
qpti->dev_param[tgt].device_flags |= 0x20; qpti->dev_param[tgt].device_flags |= 0x20;
}
scsi_rbuf_put(Cmnd, iqd);
qpti->sbits |= (1 << tgt);
} else if (!ok) {
qpti->sbits |= (1 << tgt);
}
}
done(Cmnd);
}
static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *));
static int qlogicpti_queuecommand_slow(struct scsi_cmnd *Cmnd,
void (*done)(struct scsi_cmnd *))
{
struct qlogicpti *qpti = (struct qlogicpti *) Cmnd->device->host->hostdata;
/*
* done checking this host adapter?
* If not, then rewrite the command
* to finish through ourdone so we
* can peek at Inquiry data results.
*/
if (qpti->sbits && qpti->sbits != 0xffff) {
/* See above about in ourdone this ugliness... */
Cmnd->SCp.Message = ((unsigned long)done) & 0xffffffff;
#ifdef CONFIG_SPARC64
Cmnd->SCp.Status = ((unsigned long)done >> 32UL) & 0xffffffff;
#endif
return qlogicpti_queuecommand(Cmnd, ourdone);
}
/*
* We've peeked at all targets for this bus- time
* to set parameters for devices for real now.
*/
if (qpti->sbits == 0xffff) {
int i;
for(i = 0; i < MAX_TARGETS; i++) {
u_short param[6];
param[0] = MBOX_SET_TARGET_PARAMS; param[0] = MBOX_SET_TARGET_PARAMS;
param[1] = (i << 8); param[1] = (tgt << 8);
param[2] = (qpti->dev_param[i].device_flags << 8); param[2] = (qpti->dev_param[tgt].device_flags << 8);
if (qpti->dev_param[i].device_flags & 0x10) { if (qpti->dev_param[tgt].device_flags & 0x10) {
param[3] = (qpti->dev_param[i].synchronous_offset << 8) | param[3] = (qpti->dev_param[tgt].synchronous_offset << 8) |
qpti->dev_param[i].synchronous_period; qpti->dev_param[tgt].synchronous_period;
} else { } else {
param[3] = 0; param[3] = 0;
} }
(void) qlogicpti_mbox_command(qpti, param, 0); qlogicpti_mbox_command(qpti, param, 0);
} return 0;
/*
* set to zero so any traverse through ourdone
* doesn't start the whole process again,
*/
qpti->sbits = 0;
}
/* check to see if we're done with all adapters... */
for (qpti = qptichain; qpti != NULL; qpti = qpti->next) {
if (qpti->sbits) {
break;
}
}
/*
* if we hit the end of the chain w/o finding adapters still
* capability-configuring, then we're done with all adapters
* and can rock on..
*/
if (qpti == NULL)
Cmnd->device->host->hostt->queuecommand = qlogicpti_queuecommand;
return qlogicpti_queuecommand(Cmnd, done);
} }
/* /*
...@@ -1390,7 +1270,8 @@ static struct scsi_host_template qpti_template = { ...@@ -1390,7 +1270,8 @@ static struct scsi_host_template qpti_template = {
.module = THIS_MODULE, .module = THIS_MODULE,
.name = "qlogicpti", .name = "qlogicpti",
.info = qlogicpti_info, .info = qlogicpti_info,
.queuecommand = qlogicpti_queuecommand_slow, .queuecommand = qlogicpti_queuecommand,
.slave_configure = qlogicpti_slave_configure,
.eh_abort_handler = qlogicpti_abort, .eh_abort_handler = qlogicpti_abort,
.eh_bus_reset_handler = qlogicpti_reset, .eh_bus_reset_handler = qlogicpti_reset,
.can_queue = QLOGICPTI_REQ_QUEUE_LEN, .can_queue = QLOGICPTI_REQ_QUEUE_LEN,
......
...@@ -380,8 +380,7 @@ struct qlogicpti { ...@@ -380,8 +380,7 @@ struct qlogicpti {
unsigned char swsreg; unsigned char swsreg;
unsigned int unsigned int
gotirq : 1, /* this instance got an irq */ gotirq : 1, /* this instance got an irq */
is_pti : 1, /* Non-zero if this is a PTI board. */ is_pti : 1; /* Non-zero if this is a PTI board. */
sbits : 16; /* syncmode known bits */
}; };
/* How to twiddle them bits... */ /* How to twiddle them bits... */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment