Commit 9f1e1b50 authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.3.0 : Fix some memory handling issues

- Fix mailbox buffer leak on dump mailbox completion

- Fix mbuf leak in lpfc_pci_probe_one() SLI-2 mode error path

- Don't allocate HBQs in interrupt context

- Use correct size for FCP response buffer so that all available sense
  data is copied

- Fix jiffies calculation to prevent crash when collecting statistical
  data
Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 5b75da2f
......@@ -255,8 +255,10 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
/* character array used for decoding dist type. */
char dist_char[] = "nabx";
if (pmboxq->mb.mbxStatus != MBX_SUCCESS)
if (pmboxq->mb.mbxStatus != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
prg = (struct prog_id *) &prog_id_word;
......@@ -274,6 +276,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
prg->ver, prg->rev, prg->lev,
dist, prg->num);
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
......@@ -2889,6 +2892,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
lpfc_stop_phba_timers(phba);
phba->pport->work_port_events = 0;
lpfc_disable_intr(phba);
lpfc_sli_hba_down(phba);
lpfc_sli_brdrestart(phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(vport);
out_destroy_port:
......
......@@ -66,6 +66,8 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
if (cmd->result)
return;
latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time);
spin_lock_irqsave(shost->host_lock, flags);
if (!vport->stat_data_enabled ||
vport->stat_data_blocked ||
......@@ -74,13 +76,15 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
spin_unlock_irqrestore(shost->host_lock, flags);
return;
}
latency = jiffies_to_msecs(jiffies - lpfc_cmd->start_time);
if (phba->bucket_type == LPFC_LINEAR_BUCKET) {
i = (latency + phba->bucket_step - 1 - phba->bucket_base)/
phba->bucket_step;
if (i >= LPFC_MAX_BUCKET_COUNT)
i = LPFC_MAX_BUCKET_COUNT;
/* check array subscript bounds */
if (i < 0)
i = 0;
else if (i >= LPFC_MAX_BUCKET_COUNT)
i = LPFC_MAX_BUCKET_COUNT - 1;
} else {
for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++)
if (latency <= (phba->bucket_base +
......@@ -444,14 +448,14 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl[0].tus.w = le32_to_cpu(bpl->tus.w);
bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
/* Setup the physical region for the FCP RSP */
bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl[1].tus.w = le32_to_cpu(bpl->tus.w);
bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
/*
* Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
......
......@@ -1258,68 +1258,6 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
return 0;
}
/**
* lpfc_sli_replace_hbqbuff: Replace the HBQ buffer with a new buffer.
* @phba: Pointer to HBA context object.
* @tag: Tag for the HBQ buffer.
*
* This function is called from unsolicited event handler code path to get the
* HBQ buffer associated with an unsolicited iocb. This function is called with
* no lock held. It returns the buffer associated with the given tag and posts
* another buffer to the firmware. Note that the new buffer must be allocated
* before taking the hbalock and that the hba lock must be held until it is
* finished with the hbq entry swap.
**/
static struct lpfc_dmabuf *
lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag)
{
struct hbq_dmabuf *hbq_entry, *new_hbq_entry;
uint32_t hbqno;
void *virt; /* virtual address ptr */
dma_addr_t phys; /* mapped address */
unsigned long flags;
hbqno = tag >> 16;
new_hbq_entry = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba);
/* Check whether HBQ is still in use */
spin_lock_irqsave(&phba->hbalock, flags);
if (!phba->hbq_in_use) {
if (new_hbq_entry)
(phba->hbqs[hbqno].hbq_free_buffer)(phba,
new_hbq_entry);
spin_unlock_irqrestore(&phba->hbalock, flags);
return NULL;
}
hbq_entry = lpfc_sli_hbqbuf_find(phba, tag);
if (hbq_entry == NULL) {
if (new_hbq_entry)
(phba->hbqs[hbqno].hbq_free_buffer)(phba,
new_hbq_entry);
spin_unlock_irqrestore(&phba->hbalock, flags);
return NULL;
}
list_del(&hbq_entry->dbuf.list);
if (new_hbq_entry == NULL) {
list_add_tail(&hbq_entry->dbuf.list, &phba->hbqbuf_in_list);
spin_unlock_irqrestore(&phba->hbalock, flags);
return &hbq_entry->dbuf;
}
new_hbq_entry->tag = -1;
phys = new_hbq_entry->dbuf.phys;
virt = new_hbq_entry->dbuf.virt;
new_hbq_entry->dbuf.phys = hbq_entry->dbuf.phys;
new_hbq_entry->dbuf.virt = hbq_entry->dbuf.virt;
hbq_entry->dbuf.phys = phys;
hbq_entry->dbuf.virt = virt;
lpfc_sli_free_hbq(phba, hbq_entry);
list_add_tail(&new_hbq_entry->dbuf.list, &phba->hbqbuf_in_list);
spin_unlock_irqrestore(&phba->hbalock, flags);
return &new_hbq_entry->dbuf;
}
/**
* lpfc_sli_get_buff: Get the buffer associated with the buffer tag.
* @phba: Pointer to HBA context object.
......@@ -1337,10 +1275,14 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring,
uint32_t tag)
{
struct hbq_dmabuf *hbq_entry;
if (tag & QUE_BUFTAG_BIT)
return lpfc_sli_ring_taggedbuf_get(phba, pring, tag);
else
return lpfc_sli_replace_hbqbuff(phba, tag);
hbq_entry = lpfc_sli_hbqbuf_find(phba, tag);
if (!hbq_entry)
return NULL;
return &hbq_entry->dbuf;
}
......@@ -1372,8 +1314,6 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
match = 0;
irsp = &(saveq->iocb);
if (irsp->ulpStatus == IOSTAT_NEED_BUFFER)
return 1;
if (irsp->ulpCommand == CMD_ASYNC_STATUS) {
if (pring->lpfc_sli_rcv_async_status)
pring->lpfc_sli_rcv_async_status(phba, pring, saveq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment