Commit 9f2952db authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits)
  USB: gadget: f_mass_storage: stale common->fsg value bug fix
  USB: gadget: f_mass_storage: fixed fs descriptors not being updated
  USB: musb: Enable the maximum supported burst mode for DMA
  USB: musb: fix Blackfin ulpi stubs
  USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
  USB: musb_core: make disconnect and suspend interrupts work again
  USB: obey the sysfs power/wakeup setting
  USB: gadget eth: Fix calculate CRC32 in EEM
  USB: qcserial: fix a memory leak in qcprobe error path
  USB: gadget/printer, fix sleep inside atomic
  USB: isp1362-hcd, fix double lock
  USB: serial: ftdi: correct merge conflict with CONTEC id
  USB: fix oops in usb_sg_init()
  USB: s3c2410: deactivate endpoints before gadget unbinding
  USB: ehci-mxc: bail out on transceiver problems
  USB: otg/ulpi: bail out on read errors
  usb: musb: Fix a bug by making suspend interrupt available in device mode
  USB: r8a66597: Fix failure in change of status
  USB: xHCI: Fix bug in link TRB activation change.
  USB: gadget: g_fs: possible invalid pointer reference bug fixed
  ...
parents 59e76486 b894f60a
......@@ -1272,8 +1272,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
{
int w, i;
struct usb_interface *intf;
int w;
/* Remote wakeup is needed only when we actually go to sleep.
* For things like FREEZE and QUIESCE, if the device is already
......@@ -1285,16 +1284,10 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
return;
}
/* If remote wakeup is permitted, see whether any interface drivers
/* Enable remote wakeup if it is allowed, even if no interface drivers
* actually want it.
*/
w = 0;
if (device_may_wakeup(&udev->dev) && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
w |= intf->needs_remote_wakeup;
}
}
w = device_may_wakeup(&udev->dev);
/* If the device is autosuspended with the wrong wakeup setting,
* autoresume now so the setting can be changed.
......
......@@ -416,8 +416,11 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
/* A length of zero means transfer the whole sg list */
len = length;
if (len == 0) {
for_each_sg(sg, sg, nents, i)
len += sg->length;
struct scatterlist *sg2;
int j;
for_each_sg(sg, sg2, nents, j)
len += sg2->length;
}
} else {
/*
......
......@@ -469,8 +469,7 @@ static int eem_unwrap(struct gether *port,
crc = get_unaligned_le32(skb->data + len
- ETH_FCS_LEN);
crc2 = ~crc32_le(~0,
skb->data,
skb->len - ETH_FCS_LEN);
skb->data, len - ETH_FCS_LEN);
} else {
crc = get_unaligned_be32(skb->data + len
- ETH_FCS_LEN);
......
......@@ -321,8 +321,8 @@ struct fsg_dev;
/* Data shared by all the FSG instances. */
struct fsg_common {
struct usb_gadget *gadget;
struct fsg_dev *fsg;
struct fsg_dev *prev_fsg;
struct fsg_dev *fsg, *new_fsg;
wait_queue_head_t fsg_wait;
/* filesem protects: backing files in use */
struct rw_semaphore filesem;
......@@ -351,7 +351,6 @@ struct fsg_common {
enum fsg_state state; /* For exception handling */
unsigned int exception_req_tag;
u8 config, new_config;
enum data_direction data_dir;
u32 data_size;
u32 data_size_from_cmnd;
......@@ -595,7 +594,7 @@ static int fsg_setup(struct usb_function *f,
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
if (!fsg->common->config)
if (!fsg_is_set(fsg->common))
return -EOPNOTSUPP;
switch (ctrl->bRequest) {
......@@ -2303,24 +2302,20 @@ static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
return -ENOMEM;
}
/*
* Reset interface setting and re-init endpoint state (toggle etc).
* Call with altsetting < 0 to disable the interface. The only other
* available altsetting is 0, which enables the interface.
*/
static int do_set_interface(struct fsg_common *common, int altsetting)
/* Reset interface setting and re-init endpoint state (toggle etc). */
static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
{
int rc = 0;
int i;
const struct usb_endpoint_descriptor *d;
struct fsg_dev *fsg;
int i, rc = 0;
if (common->running)
DBG(common, "reset interface\n");
reset:
/* Deallocate the requests */
if (common->prev_fsg) {
struct fsg_dev *fsg = common->prev_fsg;
if (common->fsg) {
fsg = common->fsg;
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
struct fsg_buffhd *bh = &common->buffhds[i];
......@@ -2345,18 +2340,16 @@ static int do_set_interface(struct fsg_common *common, int altsetting)
fsg->bulk_out_enabled = 0;
}
common->prev_fsg = 0;
common->fsg = NULL;
wake_up(&common->fsg_wait);
}
common->running = 0;
if (altsetting < 0 || rc != 0)
if (!new_fsg || rc)
return rc;
DBG(common, "set interface %d\n", altsetting);
if (fsg_is_set(common)) {
struct fsg_dev *fsg = common->fsg;
common->prev_fsg = common->fsg;
common->fsg = new_fsg;
fsg = common->fsg;
/* Enable the endpoints */
d = fsg_ep_desc(common->gadget,
......@@ -2395,39 +2388,6 @@ static int do_set_interface(struct fsg_common *common, int altsetting)
for (i = 0; i < common->nluns; ++i)
common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
return rc;
} else {
return -EIO;
}
}
/*
* Change our operational configuration. This code must agree with the code
* that returns config descriptors, and with interface altsetting code.
*
* It's also responsible for power management interactions. Some
* configurations might not work with our current power sources.
* For now we just assume the gadget is always self-powered.
*/
static int do_set_config(struct fsg_common *common, u8 new_config)
{
int rc = 0;
/* Disable the single interface */
if (common->config != 0) {
DBG(common, "reset config\n");
common->config = 0;
rc = do_set_interface(common, -1);
}
/* Enable the interface */
if (new_config != 0) {
common->config = new_config;
rc = do_set_interface(common, 0);
if (rc != 0)
common->config = 0; /* Reset on errors */
}
return rc;
}
......@@ -2437,9 +2397,7 @@ static int do_set_config(struct fsg_common *common, u8 new_config)
static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct fsg_dev *fsg = fsg_from_func(f);
fsg->common->prev_fsg = fsg->common->fsg;
fsg->common->fsg = fsg;
fsg->common->new_config = 1;
fsg->common->new_fsg = fsg;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
return 0;
}
......@@ -2447,9 +2405,7 @@ static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
static void fsg_disable(struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
fsg->common->prev_fsg = fsg->common->fsg;
fsg->common->fsg = fsg;
fsg->common->new_config = 0;
fsg->common->new_fsg = NULL;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
}
......@@ -2459,19 +2415,17 @@ static void fsg_disable(struct usb_function *f)
static void handle_exception(struct fsg_common *common)
{
siginfo_t info;
int sig;
int i;
struct fsg_buffhd *bh;
enum fsg_state old_state;
u8 new_config;
struct fsg_lun *curlun;
unsigned int exception_req_tag;
int rc;
/* Clear the existing signals. Anything but SIGUSR1 is converted
* into a high-priority EXIT exception. */
for (;;) {
sig = dequeue_signal_lock(current, &current->blocked, &info);
int sig =
dequeue_signal_lock(current, &current->blocked, &info);
if (!sig)
break;
if (sig != SIGUSR1) {
......@@ -2482,7 +2436,7 @@ static void handle_exception(struct fsg_common *common)
}
/* Cancel all the pending transfers */
if (fsg_is_set(common)) {
if (likely(common->fsg)) {
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
bh = &common->buffhds[i];
if (bh->inreq_busy)
......@@ -2523,7 +2477,6 @@ static void handle_exception(struct fsg_common *common)
common->next_buffhd_to_fill = &common->buffhds[0];
common->next_buffhd_to_drain = &common->buffhds[0];
exception_req_tag = common->exception_req_tag;
new_config = common->new_config;
old_state = common->state;
if (old_state == FSG_STATE_ABORT_BULK_OUT)
......@@ -2573,12 +2526,12 @@ static void handle_exception(struct fsg_common *common)
break;
case FSG_STATE_CONFIG_CHANGE:
rc = do_set_config(common, new_config);
do_set_interface(common, common->new_fsg);
break;
case FSG_STATE_EXIT:
case FSG_STATE_TERMINATED:
do_set_config(common, 0); /* Free resources */
do_set_interface(common, NULL); /* Free resources */
spin_lock_irq(&common->lock);
common->state = FSG_STATE_TERMINATED; /* Stop the thread */
spin_unlock_irq(&common->lock);
......@@ -2863,6 +2816,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
goto error_release;
}
init_completion(&common->thread_notifier);
init_waitqueue_head(&common->fsg_wait);
#undef OR
......@@ -2957,9 +2911,17 @@ static void fsg_common_release(struct kref *ref)
static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
struct fsg_common *common = fsg->common;
DBG(fsg, "unbind\n");
fsg_common_put(fsg->common);
if (fsg->common->fsg == fsg) {
fsg->common->new_fsg = NULL;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
/* FIXME: make interruptible or killable somehow? */
wait_event(common->fsg_wait, common->fsg != fsg);
}
fsg_common_put(common);
usb_free_descriptors(fsg->function.descriptors);
usb_free_descriptors(fsg->function.hs_descriptors);
kfree(fsg);
......@@ -2970,7 +2932,6 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
struct usb_gadget *gadget = c->cdev->gadget;
int rc;
int i;
struct usb_ep *ep;
......@@ -2996,6 +2957,11 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
ep->driver_data = fsg->common; /* claim the endpoint */
fsg->bulk_out = ep;
/* Copy descriptors */
f->descriptors = usb_copy_descriptors(fsg_fs_function);
if (unlikely(!f->descriptors))
return -ENOMEM;
if (gadget_is_dualspeed(gadget)) {
/* Assume endpoint addresses are the same for both speeds */
fsg_hs_bulk_in_desc.bEndpointAddress =
......@@ -3003,16 +2969,17 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
fsg_hs_bulk_out_desc.bEndpointAddress =
fsg_fs_bulk_out_desc.bEndpointAddress;
f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
if (unlikely(!f->hs_descriptors))
if (unlikely(!f->hs_descriptors)) {
usb_free_descriptors(f->descriptors);
return -ENOMEM;
}
}
return 0;
autoconf_fail:
ERROR(fsg, "unable to autoconfigure all endpoints\n");
rc = -ENOTSUPP;
return rc;
return -ENOTSUPP;
}
......@@ -3036,11 +3003,6 @@ static int fsg_add(struct usb_composite_dev *cdev,
fsg->function.name = FSG_DRIVER_DESC;
fsg->function.strings = fsg_strings_array;
fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function);
if (unlikely(!fsg->function.descriptors)) {
rc = -ENOMEM;
goto error_free_fsg;
}
fsg->function.bind = fsg_bind;
fsg->function.unbind = fsg_unbind;
fsg->function.setup = fsg_setup;
......@@ -3056,19 +3018,9 @@ static int fsg_add(struct usb_composite_dev *cdev,
rc = usb_add_function(c, &fsg->function);
if (unlikely(rc))
goto error_free_all;
fsg_common_get(fsg->common);
return 0;
error_free_all:
usb_free_descriptors(fsg->function.descriptors);
/* fsg_bind() might have copied those; or maybe not? who cares
* -- free it just in case. */
usb_free_descriptors(fsg->function.hs_descriptors);
error_free_fsg:
kfree(fsg);
else
fsg_common_get(fsg->common);
return rc;
}
......
......@@ -392,6 +392,17 @@ static int __gfs_do_config(struct usb_configuration *c,
if (unlikely(ret < 0))
return ret;
/* After previous do_configs there may be some invalid
* pointers in c->interface array. This happens every time
* a user space function with fewer interfaces than a user
* space function that was run before the new one is run. The
* compasit's set_config() assumes that if there is no more
* then MAX_CONFIG_INTERFACES interfaces in a configuration
* then there is a NULL pointer after the last interface in
* c->interface array. We need to make sure this is true. */
if (c->next_interface_id < ARRAY_SIZE(c->interface))
c->interface[c->next_interface_id] = NULL;
return 0;
}
......
......@@ -82,7 +82,7 @@ static struct class *usb_gadget_class;
struct printer_dev {
spinlock_t lock; /* lock this structure */
/* lock buffer lists during read/write calls */
spinlock_t lock_printer_io;
struct mutex lock_printer_io;
struct usb_gadget *gadget;
struct usb_request *req; /* for control responses */
u8 config;
......@@ -567,7 +567,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
spin_lock(&dev->lock_printer_io);
mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
/* We will use this flag later to check if a printer reset happened
......@@ -601,7 +601,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
* call or not.
*/
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
......@@ -648,7 +648,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
if (dev->reset_printer) {
list_add(&current_rx_req->list, &dev->rx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
......@@ -673,7 +673,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
dev->current_rx_buf = current_rx_buf;
spin_unlock_irqrestore(&dev->lock, flags);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
......@@ -697,7 +697,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (len == 0)
return -EINVAL;
spin_lock(&dev->lock_printer_io);
mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
/* Check if a printer reset happens while we have interrupts on */
......@@ -713,7 +713,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
* a NON-Blocking call or not.
*/
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
......@@ -752,7 +752,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (copy_from_user(req->buf, buf, size)) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
return bytes_copied;
}
......@@ -766,14 +766,14 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (dev->reset_printer) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
......@@ -782,7 +782,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
}
spin_unlock_irqrestore(&dev->lock, flags);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
......@@ -820,11 +820,11 @@ printer_poll(struct file *fd, poll_table *wait)
unsigned long flags;
int status = 0;
spin_lock(&dev->lock_printer_io);
mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
setup_rx_reqs(dev);
spin_unlock_irqrestore(&dev->lock, flags);
spin_unlock(&dev->lock_printer_io);
mutex_unlock(&dev->lock_printer_io);
poll_wait(fd, &dev->rx_wait, wait);
poll_wait(fd, &dev->tx_wait, wait);
......@@ -1461,7 +1461,7 @@ printer_bind(struct usb_gadget *gadget)
}
spin_lock_init(&dev->lock);
spin_lock_init(&dev->lock_printer_io);
mutex_init(&dev->lock_printer_io);
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->tx_reqs_active);
INIT_LIST_HEAD(&dev->rx_reqs);
......@@ -1594,7 +1594,7 @@ cleanup(void)
{
int status;
spin_lock(&usb_printer_gadget.lock_printer_io);
mutex_lock(&usb_printer_gadget.lock_printer_io);
class_destroy(usb_gadget_class);
unregister_chrdev_region(g_printer_devno, 2);
......@@ -1602,6 +1602,6 @@ cleanup(void)
if (status)
ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
spin_unlock(&usb_printer_gadget.lock_printer_io);
mutex_unlock(&usb_printer_gadget.lock_printer_io);
}
module_exit(cleanup);
......@@ -1700,9 +1700,13 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
driver->driver.name);
/* report disconnect */
if (driver->disconnect)
driver->disconnect(&udc->gadget);
driver->unbind(&udc->gadget);
device_del(&udc->gadget.dev);
......
......@@ -536,17 +536,11 @@ static void gs_rx_push(unsigned long _port)
list_move(&req->list, &port->read_pool);
}
/* Push from tty to ldisc; this is immediate with low_latency, and
* may trigger callbacks to this driver ... so drop the spinlock.
/* Push from tty to ldisc; without low_latency set this is handled by
* a workqueue, so we won't get callbacks and can hold port_lock
*/
if (tty && do_push) {
spin_unlock_irq(&port->port_lock);
tty_flip_buffer_push(tty);
wake_up_interruptible(&tty->read_wait);
spin_lock_irq(&port->port_lock);
/* tty may have been closed */
tty = port->port_tty;
}
......@@ -784,11 +778,6 @@ static int gs_open(struct tty_struct *tty, struct file *file)
port->open_count = 1;
port->openclose = false;
/* low_latency means ldiscs work in tasklet context, without
* needing a workqueue schedule ... easier to keep up.
*/
tty->low_latency = 1;
/* if connected, start the I/O stream */
if (port->port_usb) {
struct gserial *gser = port->port_usb;
......@@ -1195,6 +1184,7 @@ void gserial_cleanup(void)
n_ports = 0;
tty_unregister_driver(gs_tty_driver);
put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
pr_debug("%s: cleaned up ttyGS* support\n", __func__);
......
......@@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
/* Initialize the transceiver */
if (pdata->otg) {
pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
if (otg_init(pdata->otg) != 0)
dev_err(dev, "unable to init transceiver\n");
else if (otg_set_vbus(pdata->otg, 1) != 0)
ret = otg_init(pdata->otg);
if (ret) {
dev_err(dev, "unable to init transceiver, probably missing\n");
ret = -ENODEV;
goto err_add;
}
ret = otg_set_vbus(pdata->otg, 1);
if (ret) {
dev_err(dev, "unable to enable vbus on transceiver\n");
goto err_add;
}
}
priv->hcd = hcd;
......
......@@ -2224,12 +2224,9 @@ static void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
/*-------------------------------------------------------------------------*/
static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
{
int tmp = 20;
unsigned long flags;
spin_lock_irqsave(&isp1362_hcd->lock, flags);
isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
......@@ -2240,6 +2237,14 @@ static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
}
if (!tmp)
pr_err("Software reset timeout\n");
}
static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
{
unsigned long flags;
spin_lock_irqsave(&isp1362_hcd->lock, flags);
__isp1362_sw_reset(isp1362_hcd);
spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
}
......@@ -2418,7 +2423,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd)
if (isp1362_hcd->board && isp1362_hcd->board->reset)
isp1362_hcd->board->reset(hcd->self.controller, 1);
else
isp1362_sw_reset(isp1362_hcd);
__isp1362_sw_reset(isp1362_hcd);
if (isp1362_hcd->board && isp1362_hcd->board->clock)
isp1362_hcd->board->clock(hcd->self.controller, 0);
......
......@@ -1065,7 +1065,7 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
else if (speed == LSMODE)
rh->port |= USB_PORT_STAT_LOW_SPEED;
rh->port &= USB_PORT_STAT_RESET;
rh->port &= ~USB_PORT_STAT_RESET;
rh->port |= USB_PORT_STAT_ENABLE;
}
......
......@@ -182,8 +182,12 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
* set, but other sections talk about dealing with the chain bit set. This was
* fixed in the 0.96 specification errata, but we have to assume that all 0.95
* xHCI hardware can't handle the chain bit being cleared on a link TRB.
*
* @more_trbs_coming: Will you enqueue more TRBs before calling
* prepare_transfer()?
*/
static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
bool consumer, bool more_trbs_coming)
{
u32 chain;
union xhci_trb *next;
......@@ -199,15 +203,28 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
while (last_trb(xhci, ring, ring->enq_seg, next)) {
if (!consumer) {
if (ring != xhci->event_ring) {
if (chain) {
next->link.control |= TRB_CHAIN;
/*
* If the caller doesn't plan on enqueueing more
* TDs before ringing the doorbell, then we
* don't want to give the link TRB to the
* hardware just yet. We'll give the link TRB
* back in prepare_ring() just before we enqueue
* the TD at the top of the ring.
*/
if (!chain && !more_trbs_coming)
break;
/* If we're not dealing with 0.95 hardware,
* carry over the chain bit of the previous TRB
* (which may mean the chain bit is cleared).
*/
if (!xhci_link_trb_quirk(xhci)) {
next->link.control &= ~TRB_CHAIN;
next->link.control |= chain;
}
/* Give this link TRB to the hardware */
wmb();
next->link.control ^= TRB_CYCLE;
} else {
break;
}
}
/* Toggle the cycle bit after the last ring segment. */
if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
......@@ -1707,9 +1724,12 @@ void xhci_handle_event(struct xhci_hcd *xhci)
/*
* Generic function for queueing a TRB on a ring.
* The caller must have checked to make sure there's room on the ring.
*
* @more_trbs_coming: Will you enqueue more TRBs before calling
* prepare_transfer()?
*/
static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
bool consumer,
bool consumer, bool more_trbs_coming,
u32 field1, u32 field2, u32 field3, u32 field4)
{
struct xhci_generic_trb *trb;
......@@ -1719,7 +1739,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
trb->field[1] = field2;
trb->field[2] = field3;
trb->field[3] = field4;
inc_enq(xhci, ring, consumer);
inc_enq(xhci, ring, consumer, more_trbs_coming);
}
/*
......@@ -1988,6 +2008,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
int trb_buff_len, this_sg_len, running_total;
bool first_trb;
u64 addr;
bool more_trbs_coming;
struct xhci_generic_trb *start_trb;
int start_cycle;
......@@ -2073,7 +2094,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
if (num_trbs > 1)
more_trbs_coming = true;
else
more_trbs_coming = false;
queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
......@@ -2124,6 +2149,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
int num_trbs;
struct xhci_generic_trb *start_trb;
bool first_trb;
bool more_trbs_coming;
int start_cycle;
u32 field, length_field;
......@@ -2212,7 +2238,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
if (num_trbs > 1)
more_trbs_coming = true;
else
more_trbs_coming = false;
queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
......@@ -2291,7 +2321,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
queue_trb(xhci, ep_ring, false,
queue_trb(xhci, ep_ring, false, true,
/* FIXME endianness is probably going to bite my ass here. */
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
setup->wIndex | setup->wLength << 16,
......@@ -2307,7 +2337,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
queue_trb(xhci, ep_ring, false,
queue_trb(xhci, ep_ring, false, true,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
length_field,
......@@ -2324,7 +2354,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field = 0;
else
field = TRB_DIR_IN;
queue_trb(xhci, ep_ring, false,
queue_trb(xhci, ep_ring, false, false,
0,
0,
TRB_INTR_TARGET(0),
......@@ -2361,7 +2391,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
"unfailable commands failed.\n");
return -ENOMEM;
}
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
return 0;
}
......
......@@ -219,8 +219,8 @@ static int musb_ulpi_write(struct otg_transceiver *otg,
return 0;
}
#else
#define musb_ulpi_read(a, b) NULL
#define musb_ulpi_write(a, b, c) NULL
#define musb_ulpi_read NULL
#define musb_ulpi_write NULL
#endif
static struct otg_io_access_ops musb_ulpi_access = {
......@@ -451,10 +451,6 @@ void musb_hnp_stop(struct musb *musb)
* @param power
*/
#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
| MUSB_INTR_RESET)
static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
u8 devctl, u8 power)
{
......@@ -642,7 +638,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
handled = IRQ_HANDLED;
}
#endif
if (int_usb & MUSB_INTR_SUSPEND) {
DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
otg_state_string(musb), devctl, power);
......@@ -705,6 +701,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
}
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (int_usb & MUSB_INTR_CONNECT) {
struct usb_hcd *hcd = musb_to_hcd(musb);
void __iomem *mbase = musb->mregs;
......@@ -1597,7 +1594,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
/* the core can interrupt us for multiple reasons; docs have
* a generic interrupt flowchart to follow
*/
if (musb->int_usb & STAGE0_MASK)
if (musb->int_usb)
retval |= musb_stage0_irq(musb, musb->int_usb,
devctl, power);
......
......@@ -470,7 +470,8 @@ struct musb_csr_regs {
struct musb_context_registers {
#ifdef CONFIG_PM
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
u32 otg_sysconfig, otg_forcestandby;
#endif
u8 power;
......@@ -484,7 +485,8 @@ struct musb_context_registers {
struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
};
#ifdef CONFIG_PM
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
extern void musb_platform_save_context(struct musb *musb,
struct musb_context_registers *musb_context);
extern void musb_platform_restore_context(struct musb *musb,
......
......@@ -132,18 +132,9 @@ static void configure_channel(struct dma_channel *channel,
if (mode) {
csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
BUG_ON(len < packet_sz);
if (packet_sz >= 64) {
}
csr |= MUSB_HSDMA_BURSTMODE_INCR16
<< MUSB_HSDMA_BURSTMODE_SHIFT;
} else if (packet_sz >= 32) {
csr |= MUSB_HSDMA_BURSTMODE_INCR8
<< MUSB_HSDMA_BURSTMODE_SHIFT;
} else if (packet_sz >= 16) {
csr |= MUSB_HSDMA_BURSTMODE_INCR4
<< MUSB_HSDMA_BURSTMODE_SHIFT;
}
}
csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
| (1 << MUSB_HSDMA_ENABLE_SHIFT)
......
......@@ -59,12 +59,17 @@ static int ulpi_set_flags(struct otg_transceiver *otg)
static int ulpi_init(struct otg_transceiver *otg)
{
int i, vid, pid;
vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) |
otg_io_read(otg, ULPI_VENDOR_ID_LOW);
pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) |
otg_io_read(otg, ULPI_PRODUCT_ID_LOW);
int i, vid, pid, ret;
u32 ulpi_id = 0;
for (i = 0; i < 4; i++) {
ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i);
if (ret < 0)
return ret;
ulpi_id = (ulpi_id << 8) | ret;
}
vid = ulpi_id & 0xffff;
pid = ulpi_id >> 16;
pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
......
......@@ -653,7 +653,6 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
......
......@@ -500,13 +500,6 @@
#define CONTEC_VID 0x06CE /* Vendor ID */
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
/*
* Contec products (http://www.contec.com)
* Submitted by Daniel Sangorrin
*/
#define CONTEC_VID 0x06CE /* Vendor ID */
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
/*
* Definitions for B&B Electronics products.
*/
......
......@@ -139,6 +139,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
kfree(data);
}
return retval;
}
......@@ -155,6 +156,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
kfree(data);
}
return retval;
}
......@@ -163,6 +165,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
default:
dev_err(&serial->dev->dev,
"unknown number of interfaces: %d\n", nintf);
kfree(data);
return -ENODEV;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment