Skip to content

L
linux
Commit 9f2adacb authored by Ion Badulescu's avatar Ion Badulescu Committed by Jeff Garzik
Browse files
Options

starfire net driver updates: 

* Sparc64 support and fixes.
* Better stats and error handling.
parent 579574a4
Show whitespace changes
Inline Side-by-side
Showing with 43 additions and 18 deletions
drivers/net/Config.in
View file @ 9f2adacb
......@@ -148,7 +148,7 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
fi
if [ "$CONFIG_NET_PCI" = "y" ]; then
dep_tristate ' AMD PCnet32 PCI support' CONFIG_PCNET32 $CONFIG_PCI
dep_tristate ' Adaptec Starfire support (EXPERIMENTAL)' CONFIG_ADAPTEC_STARFIRE $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' Adaptec Starfire/DuraLAN support' CONFIG_ADAPTEC_STARFIRE $CONFIG_PCI
if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" ]; then
dep_tristate ' Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 $CONFIG_EXPERIMENTAL
fi
......
drivers/net/starfire.c
View file @ 9f2adacb
......@@ -96,13 +96,18 @@
LK1.3.5 (jgarzik)
- ethtool NWAY_RST, GLINK, [GS]MSGLVL support
LK1.3.6 (Ion Badulescu)
- Sparc64 support and fixes
- Better stats and error handling
TODO:
- implement tx_timeout() properly
- VLAN support
*/
#define DRV_NAME "starfire"
#define DRV_VERSION "1.03+LK1.3.5"
#define DRV_RELDATE "November 17, 2001"
#define DRV_VERSION "1.03+LK1.3.6"
#define DRV_RELDATE "March 6, 2002"
#include <linux/version.h>
#include <linux/module.h>
......@@ -128,8 +133,11 @@
* for this driver to really use the firmware. Note that Rx/Tx
* hardware TCP checksumming is not possible without the firmware.
*
* I'm currently [Feb 2001] talking to Adaptec about this redistribution
* issue. Stay tuned...
* If Adaptec could allow redistribution of the firmware (even in binary
* format), life would become a lot easier. Unfortunately, I've lost my
* Adaptec contacts, so progress on this front is rather unlikely to
* occur. If anybody from Adaptec reads this and can help with this matter,
* please let me know...
*/
#undef HAS_FIRMWARE
/*
......@@ -609,6 +617,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
long ioaddr;
int drv_flags, io_size;
int boguscnt;
u16 cmd;
u8 cache;
/* when built into the kernel, we only print version if device is found */
......@@ -644,14 +653,22 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
goto err_out_free_netdev;
}
ioaddr = (long) ioremap (ioaddr, io_size);
/* ioremap is borken in Linux-2.2.x/sparc64 */
#if !defined(CONFIG_SPARC64) || LINUX_VERSION_CODE > 0x20300
ioaddr = (long) ioremap(ioaddr, io_size);
if (!ioaddr) {
printk (KERN_ERR DRV_NAME " %d: cannot remap 0x%x @ 0x%lx, aborting\n",
card_idx, io_size, ioaddr);
goto err_out_free_res;
}
#endif /* !CONFIG_SPARC64 || Linux 2.3.0+ */
pci_set_master(pdev);
pci_set_master (pdev);
/* enable MWI -- it vastly improves Rx performance on sparc64 */
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
/* set PCI cache size */
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache);
......@@ -670,7 +687,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
/* Serial EEPROM reads are hidden by the hardware. */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = readb(ioaddr + EEPROMCtrl + 20-i);
dev->dev_addr[i] = readb(ioaddr + EEPROMCtrl + 20 - i);
#if ! defined(final_version) /* Dump the EEPROM contents during development. */
if (debug > 4)
......@@ -932,7 +949,7 @@ static int netdev_open(struct net_device *dev)
/* Fill both the unused Tx SA register and the Rx perfect filter. */
for (i = 0; i < 6; i++)
writeb(dev->dev_addr[i], ioaddr + StationAddr + 5-i);
writeb(dev->dev_addr[i], ioaddr + StationAddr + 5 - i);
for (i = 0; i < 16; i++) {
u16 *eaddrs = (u16 *)dev->dev_addr;
long setup_frm = ioaddr + PerfFilterTable + i * 16;
......@@ -979,9 +996,9 @@ static int netdev_open(struct net_device *dev)
#ifdef HAS_FIRMWARE
/* Load Rx/Tx firmware into the frame processors */
for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++)
writel(cpu_to_le32(firmware_rx[i]), ioaddr + RxGfpMem + i * 4);
writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4);
for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++)
writel(cpu_to_le32(firmware_tx[i]), ioaddr + TxGfpMem + i * 4);
writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4);
/* Enable the Rx and Tx units, and the Rx/Tx frame processors. */
writel(0x003F, ioaddr + GenCtrl);
#else /* not HAS_FIRMWARE */
......@@ -1156,8 +1173,8 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
np->tx_ring[entry].first_addr = cpu_to_le32(np->tx_info[entry].first_mapping);
#ifdef ZEROCOPY
np->tx_ring[entry].first_len = cpu_to_le32(skb_first_frag_len(skb));
np->tx_ring[entry].total_len = cpu_to_le32(skb->len);
np->tx_ring[entry].first_len = cpu_to_le16(skb_first_frag_len(skb));
np->tx_ring[entry].total_len = cpu_to_le16(skb->len);
/* Add "| TxDescIntr" to generate Tx-done interrupts. */
np->tx_ring[entry].status = cpu_to_le32(TxDescID | TxCRCEn);
np->tx_ring[entry].nbufs = cpu_to_le32(skb_shinfo(skb)->nr_frags + 1);
......@@ -1170,8 +1187,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
np->tx_ring[entry].status |= cpu_to_le32(TxRingWrap | TxDescIntr);
#ifdef ZEROCOPY
if (skb->ip_summed == CHECKSUM_HW)
if (skb->ip_summed == CHECKSUM_HW) {
np->tx_ring[entry].status |= cpu_to_le32(TxCalTCP);
np->stats.tx_compressed++;
}
#endif /* ZEROCOPY */
if (debug > 5) {
......@@ -1449,6 +1468,7 @@ static int netdev_rx(struct net_device *dev)
#if defined(full_rx_status) || defined(csum_rx_status)
if (le32_to_cpu(np->rx_done_q[np->rx_done].status2) & 0x01000000) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
np->stats.rx_compressed++;
}
/*
* This feature doesn't seem to be working, at least
......@@ -1580,12 +1600,17 @@ static void netdev_error(struct net_device *dev, int intr_status)
printk(KERN_NOTICE "%s: Increasing Tx FIFO threshold to %d bytes\n",
dev->name, np->tx_threshold * 16);
}
if ((intr_status & ~(IntrNormalMask | IntrAbnormalSummary | IntrLinkChange | IntrStatsMax | IntrTxDataLow | IntrPCIPad)) && debug)
if (intr_status & IntrRxGFPDead) {
np->stats.rx_fifo_errors++;
np->stats.rx_errors++;
}
if (intr_status & (IntrNoTxCsum | IntrDMAErr)) {
np->stats.tx_fifo_errors++;
np->stats.tx_errors++;
}
if ((intr_status & ~(IntrNormalMask | IntrAbnormalSummary | IntrLinkChange | IntrStatsMax | IntrTxDataLow | IntrRxGFPDead | IntrNoTxCsum | IntrPCIPad)) && debug)
printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
dev->name, intr_status);
/* Hmmmmm, it's not clear how to recover from DMA faults. */
if (intr_status & IntrDMAErr)
np->stats.tx_fifo_errors++;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7