Merge tag 'for-net-next-2022-01-07' of...

Merge tag 'for-net-next-2022-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - Add support for Foxconn QCA 0xe0d0
 - Fix HCI init sequence on MacBook Air 8,1 and 8,2
 - Fix Intel firmware loading on legacy ROM devices

* tag 'for-net-next-2022-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
  Bluetooth: hci_sock: fix endian bug in hci_sock_setsockopt()
  Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt()
  Bluetooth: btqca: sequential validation
  Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0
  Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices
  Bluetooth: hci_event: Rework hci_inquiry_result_with_rssi_evt
  Bluetooth: btbcm: disable read tx power for MacBook Air 8,1 and 8,2
  Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe
  Bluetooth: hci_bcm: Check for error irq
====================

Link: https://lore.kernel.org/r/20220107210942.3750887-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/bluetooth/btbcm.c

@@ -363,6 +363,18 @@ static const struct dmi_system_id disable_broken_read_transmit_power[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,4"),
 		},
 	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,2"),
+		},
+	},
 	{
 		 .matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),

drivers/bluetooth/btintel.c

@@ -2355,8 +2355,15 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 	 * As a workaround, send HCI Reset command first which will reset the
 	 * number of completed commands and allow normal command processing
 	 * from now on.
-	 */
-	if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD)) {
+	 *
+	 * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe
+	 * in the SW_RFKILL ON state as a workaround of fixing LED issue during
+	 * the shutdown() procedure, and once the device is in SW_RFKILL ON
+	 * state, the only way to exit out of it is sending the HCI_Reset
+	 * command.
+	 */
+	if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) ||
+	    btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
 		skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
 				     HCI_INIT_TIMEOUT);
 		if (IS_ERR(skb)) {
@@ -2428,12 +2435,6 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 				set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
 					&hdev->quirks);
 
-			/* These devices have an issue with LED which doesn't
-			 * go off immediately during shutdown. Set the flag
-			 * here to send the LED OFF command during shutdown.
-			 */
-			btintel_set_flag(hdev, INTEL_BROKEN_LED);
-
 			err = btintel_legacy_rom_setup(hdev, &ver);
 			break;
 		case 0x0b:      /* SfP */
@@ -2586,9 +2587,10 @@ static int btintel_shutdown_combined(struct hci_dev *hdev)
 
 	/* Some platforms have an issue with BT LED when the interface is
 	 * down or BT radio is turned off, which takes 5 seconds to BT LED
-	 * goes off. This command turns off the BT LED immediately.
+	 * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the
+	 * device in the RFKILL ON state which turns off the BT LED immediately.
 	 */
-	if (btintel_test_flag(hdev, INTEL_BROKEN_LED)) {
+	if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
 		skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
 		if (IS_ERR(skb)) {
 			ret = PTR_ERR(skb);

drivers/bluetooth/btintel.h

@@ -150,7 +150,7 @@ enum {
 	INTEL_FIRMWARE_FAILED,
 	INTEL_BOOTING,
 	INTEL_BROKEN_INITIAL_NCMD,
-	INTEL_BROKEN_LED,
+	INTEL_BROKEN_SHUTDOWN_LED,
 	INTEL_ROM_LEGACY,
 
 	__INTEL_NUM_FLAGS,

drivers/bluetooth/btqca.c

@@ -142,6 +142,50 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
 	return err;
 }
 
+static int qca_send_patch_config_cmd(struct hci_dev *hdev)
+{
+	const u8 cmd[] = { EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0 };
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	int err;
+
+	bt_dev_dbg(hdev, "QCA Patch config");
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, sizeof(cmd),
+				cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
+		return err;
+	}
+
+	if (skb->len != 2) {
+		bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
+		err = -EILSEQ;
+		goto out;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA Patch config with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != EDL_PATCH_CONFIG_CMD) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+			   edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	err = 0;
+
+out:
+	kfree_skb(skb);
+	return err;
+}
+
 static int qca_send_reset(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -552,6 +596,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	 */
 	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
 
+	if (soc_type == QCA_WCN6750)
+		qca_send_patch_config_cmd(hdev);
+
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
 	if (qca_is_wcn399x(soc_type)) {

drivers/bluetooth/btqca.h

@@ -13,6 +13,7 @@
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
 #define EDL_GET_BUILD_INFO_CMD		(0x20)
 #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
+#define EDL_PATCH_CONFIG_CMD		(0x28)
 #define MAX_SIZE_PER_TLV_SEGMENT	(243)
 #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
 #define QCA_DISABLE_LOGGING		(0xFC17)
@@ -24,6 +25,7 @@
 #define EDL_CMD_EXE_STATUS_EVT		(0x00)
 #define EDL_SET_BAUDRATE_RSP_EVT	(0x92)
 #define EDL_NVM_ACCESS_CODE_EVT		(0x0B)
+#define EDL_PATCH_CONFIG_RES_EVT	(0x00)
 #define QCA_DISABLE_LOGGING_SUB_OP	(0x14)
 
 #define EDL_TAG_ID_HCI			(17)

drivers/bluetooth/btusb.c

@@ -60,6 +60,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_WIDEBAND_SPEECH	0x400000
 #define BTUSB_VALID_LE_STATES   0x800000
 #define BTUSB_QCA_WCN6855	0x1000000
+#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED	0x2000000
 #define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
 
 static const struct usb_device_id btusb_table[] = {
@@ -311,6 +312,9 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@@ -381,10 +385,13 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_INTEL_BROKEN_INITIAL_NCMD },
-	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
+						     BTUSB_INTEL_BROKEN_INITIAL_NCMD |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
 	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
-	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
 	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED },
 
 	/* Other Intel Bluetooth devices */
@@ -3732,6 +3739,9 @@ static int btusb_probe(struct usb_interface *intf,
 
 		if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
 			btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED)
+			btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED);
 	}
 
 	if (id->driver_info & BTUSB_MARVELL)

drivers/bluetooth/hci_bcm.c

@@ -1188,7 +1188,12 @@ static int bcm_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dev->dev = &pdev->dev;
-	dev->irq = platform_get_irq(pdev, 0);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	dev->irq = ret;
 
 	/* Initialize routing field to an unused value */
 	dev->pcm_int_params[0] = 0xff;

drivers/bluetooth/hci_qca.c

@@ -2059,14 +2059,14 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
 			power_ctrl_enabled = false;
 		}
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
-		if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
+		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
 			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
 
 		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2088,7 +2088,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en)) {
 			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
 			power_ctrl_enabled = false;
 		}

include/net/bluetooth/hci.h

@@ -2233,11 +2233,7 @@ struct inquiry_info_rssi_pscan {
 } __packed;
 struct hci_ev_inquiry_result_rssi {
 	__u8     num;
-	struct inquiry_info_rssi info[];
-} __packed;
-struct hci_ev_inquiry_result_rssi_pscan {
-	__u8     num;
-	struct inquiry_info_rssi_pscan info[];
+	__u8     data[];
 } __packed;
 
 #define HCI_EV_REMOTE_EXT_FEATURES	0x23

net/bluetooth/hci_event.c

@@ -4507,16 +4507,13 @@ static void hci_pscan_rep_mode_evt(struct hci_dev *hdev, void *data,
 static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, void *edata,
 					     struct sk_buff *skb)
 {
-	union {
-		struct hci_ev_inquiry_result_rssi *res1;
-		struct hci_ev_inquiry_result_rssi_pscan *res2;
-	} *ev = edata;
+	struct hci_ev_inquiry_result_rssi *ev = edata;
 	struct inquiry_data data;
 	int i;
 
-	bt_dev_dbg(hdev, "num_rsp %d", ev->res1->num);
+	bt_dev_dbg(hdev, "num_rsp %d", ev->num);
 
-	if (!ev->res1->num)
+	if (!ev->num)
 		return;
 
 	if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ))
@@ -4524,10 +4521,11 @@ static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, void *edata,
 
 	hci_dev_lock(hdev);
 
-	if (skb->len == flex_array_size(ev, res2->info, ev->res2->num)) {
+	if (skb->len == array_size(ev->num,
+				   sizeof(struct inquiry_info_rssi_pscan))) {
 		struct inquiry_info_rssi_pscan *info;
 
-		for (i = 0; i < ev->res2->num; i++) {
+		for (i = 0; i < ev->num; i++) {
 			u32 flags;
 
 			info = hci_ev_skb_pull(hdev, skb,
@@ -4554,10 +4552,11 @@ static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, void *edata,
 					  info->dev_class, info->rssi,
 					  flags, NULL, 0, NULL, 0);
 		}
-	} else if (skb->len == flex_array_size(ev, res1->info, ev->res1->num)) {
+	} else if (skb->len == array_size(ev->num,
+					  sizeof(struct inquiry_info_rssi))) {
 		struct inquiry_info_rssi *info;
 
-		for (i = 0; i < ev->res1->num; i++) {
+		for (i = 0; i < ev->num; i++) {
 			u32 flags;
 
 			info = hci_ev_skb_pull(hdev, skb,

net/bluetooth/hci_sock.c

@@ -1911,7 +1911,8 @@ static int hci_sock_setsockopt(struct socket *sock, int level, int optname,
 			       sockptr_t optval, unsigned int len)
 {
 	struct sock *sk = sock->sk;
-	int err = 0, opt = 0;
+	int err = 0;
+	u16 opt;
 
 	BT_DBG("sk %p, opt %d", sk, optname);
 
@@ -1937,7 +1938,7 @@ static int hci_sock_setsockopt(struct socket *sock, int level, int optname,
 			goto done;
 		}
 
-		if (copy_from_sockptr(&opt, optval, sizeof(u16))) {
+		if (copy_from_sockptr(&opt, optval, sizeof(opt))) {
 			err = -EFAULT;
 			break;
 		}

net/bluetooth/l2cap_sock.c

@@ -904,6 +904,8 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 	struct l2cap_conn *conn;
 	int len, err = 0;
 	u32 opt;
+	u16 mtu;
+	u8 mode;
 
 	BT_DBG("sk %p", sk);
 
@@ -1086,16 +1088,16 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 			break;
 		}
 
-		if (copy_from_sockptr(&opt, optval, sizeof(u16))) {
+		if (copy_from_sockptr(&mtu, optval, sizeof(u16))) {
 			err = -EFAULT;
 			break;
 		}
 
 		if (chan->mode == L2CAP_MODE_EXT_FLOWCTL &&
 		    sk->sk_state == BT_CONNECTED)
-			err = l2cap_chan_reconfigure(chan, opt);
+			err = l2cap_chan_reconfigure(chan, mtu);
 		else
-			chan->imtu = opt;
+			chan->imtu = mtu;
 
 		break;
 
@@ -1117,14 +1119,14 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 			break;
 		}
 
-		if (copy_from_sockptr(&opt, optval, sizeof(u8))) {
+		if (copy_from_sockptr(&mode, optval, sizeof(u8))) {
 			err = -EFAULT;
 			break;
 		}
 
-		BT_DBG("opt %u", opt);
+		BT_DBG("mode %u", mode);
 
-		err = l2cap_set_mode(chan, opt);
+		err = l2cap_set_mode(chan, mode);
 		if (err)
 			break;