dt-bindings: Clean-up schema indentation formatting

Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml

@@ -21,5 +21,4 @@ properties:
               - ea,ea3250
               - phytec,phy3250
           - const: nxp,lpc3250
-
 ...

Documentation/devicetree/bindings/clock/fsl,plldig.yaml

@@ -28,12 +28,11 @@ properties:
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
     minimum: 650000000
     maximum: 1300000000
     default: 1188000000

Documentation/devicetree/bindings/clock/qcom,mmcc.yaml

@@ -15,7 +15,7 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
       - qcom,mmcc-apq8064
       - qcom,mmcc-apq8084

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -144,7 +144,7 @@ required:
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
-  - |+
+  - |
     muic-max77843 {
       usb_con1: connector {
         compatible = "usb-b-connector";
@@ -156,7 +156,7 @@ examples:
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
   # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-  - |+
+  - |
     ccic: s2mm005 {
       usb_con2: connector {
         compatible = "usb-c-connector";
@@ -190,7 +190,7 @@ examples:
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
   # power delivery support and enables drp.
-  - |+
+  - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
       usb_con3: connector {

Documentation/devicetree/bindings/input/touchscreen/goodix.yaml

@@ -63,7 +63,7 @@ required:
   - interrupts
 
 examples:
-- |
+  - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;

Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml

@@ -35,8 +35,7 @@ properties:
 
   bus_freq:
     maximum: 2500000
-      description:
-        MDIO Bus frequency
+    description: MDIO Bus frequency
 
   ti,hwmods:
     description: TI hwmod name

Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml

@@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: BCM7216 RESCAL reset controller
 
-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>

Documentation/devicetree/bindings/serial/rs485.yaml

@@ -6,10 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -37,9 +36,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
 
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
     description: enables the receiving of data even while sending data.
     $ref: /schemas/types.yaml#/definitions/flag
+...

Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml

@@ -11,9 +11,9 @@ maintainers:
   - Mukesh Savaliya <msavaliy@codeaurora.org>
   - Akash Asthana <akashast@codeaurora.org>
 
-description:
- The QSPI controller allows SPI protocol communication in single, dual, or quad
- wire transmission modes for read/write access to slaves such as NOR flash.
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
 
 allOf:
   - $ref: /spi/spi-controller.yaml#

Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml

@@ -77,7 +77,7 @@ patternProperties:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
         maxItems: 2
         items: