Commit 9f62ecf4 authored by Jacob Keller's avatar Jacob Keller Committed by Jeff Kirsher

igb: separate hardware setting from the set_ts_config ioctl

This patch separates the hardware logic from the set function, so that
we can re-use it during a ptp_reset. This enables the reset to return
functionality to the last known timestamp mode, rather than resetting
the value. We initialize the mode to off during the ptp_init cycle.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 23d87824
......@@ -559,10 +559,11 @@ int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr)
return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
-EFAULT : 0;
}
/**
* igb_ptp_set_ts_config - control hardware time stamping
* @netdev:
* @ifreq:
* igb_ptp_set_timestamp_mode - setup hardware for timestamping
* @adapter: networking device structure
* @config: hwtstamp configuration
*
* Outgoing time stamping can be enabled and disabled. Play nice and
* disable it when requested, although it shouldn't case any overhead
......@@ -575,12 +576,11 @@ int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr)
* type has to be specified. Matching the kind of event packet is
* not supported, with the exception of "all V2 events regardless of
* level 2 or 4".
**/
int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
*/
static int igb_ptp_set_timestamp_mode(struct igb_adapter *adapter,
struct hwtstamp_config *config)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
struct hwtstamp_config *config = &adapter->tstamp_config;
u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
u32 tsync_rx_cfg = 0;
......@@ -588,9 +588,6 @@ int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
bool is_l2 = false;
u32 regval;
if (copy_from_user(config, ifr->ifr_data, sizeof(*config)))
return -EFAULT;
/* reserved for future extensions */
if (config->flags)
return -EINVAL;
......@@ -725,7 +722,33 @@ int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
regval = rd32(E1000_RXSTMPL);
regval = rd32(E1000_RXSTMPH);
return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
return 0;
}
/**
* igb_ptp_set_ts_config - set hardware time stamping config
* @netdev:
* @ifreq:
*
**/
int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct hwtstamp_config config;
int err;
if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
return -EFAULT;
err = igb_ptp_set_timestamp_mode(adapter, &config);
if (err)
return err;
/* save these settings for future reference */
memcpy(&adapter->tstamp_config, &config,
sizeof(adapter->tstamp_config));
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
......@@ -820,6 +843,9 @@ void igb_ptp_init(struct igb_adapter *adapter)
wr32(E1000_IMS, E1000_IMS_TS);
}
adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
&adapter->pdev->dev);
if (IS_ERR(adapter->ptp_clock)) {
......@@ -884,7 +910,7 @@ void igb_ptp_reset(struct igb_adapter *adapter)
return;
/* reset the tstamp_config */
memset(&adapter->tstamp_config, 0, sizeof(adapter->tstamp_config));
igb_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
switch (adapter->hw.mac.type) {
case e1000_82576:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment