Skip to content

L
linux
Commit 9f72c1d9 authored by Kevin Gan's avatar Kevin Gan Committed by Gustavo F. Padovan
Browse files
Options

Bluetooth: btmrvl: support Marvell Bluetooth device SD8787 

The SD8787 firmware image is shared with mwifiex driver.
Whoever gets loaded first will be responsible for firmware
downloading.
Signed-off-by: default avatarKevin Gan <ganhy@marvell.com>
Signed-off-by: default avatarTristan Xu <xurf@marvell.com>
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
parent b86ed368
Hide whitespace changes
Inline Side-by-side
Showing with 132 additions and 64 deletions
drivers/bluetooth/Kconfig
View file @ 9f72c1d9
......@@ -188,7 +188,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
Marvell Bluetooth devices, such as 8688.
Marvell Bluetooth devices, such as 8688/8787.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
......@@ -201,7 +201,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
devices with SDIO interface. Currently only SD8688 chipset is
devices with SDIO interface. Currently SD8688/SD8787 chipsets are
supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
......
drivers/bluetooth/btmrvl_sdio.c
View file @ 9f72c1d9
......@@ -49,15 +49,59 @@
static u8 user_rmmod;
static u8 sdio_ireg;
static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
.cfg = 0x03,
.host_int_mask = 0x04,
.host_intstatus = 0x05,
.card_status = 0x20,
.sq_read_base_addr_a0 = 0x10,
.sq_read_base_addr_a1 = 0x11,
.card_fw_status0 = 0x40,
.card_fw_status1 = 0x41,
.card_rx_len = 0x42,
.card_rx_unit = 0x43,
.io_port_0 = 0x00,
.io_port_1 = 0x01,
.io_port_2 = 0x02,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
.cfg = 0x00,
.host_int_mask = 0x02,
.host_intstatus = 0x03,
.card_status = 0x30,
.sq_read_base_addr_a0 = 0x40,
.sq_read_base_addr_a1 = 0x41,
.card_revision = 0x5c,
.card_fw_status0 = 0x60,
.card_fw_status1 = 0x61,
.card_rx_len = 0x62,
.card_rx_unit = 0x63,
.io_port_0 = 0x78,
.io_port_1 = 0x79,
.io_port_2 = 0x7a,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
.helper = "sd8688_helper.bin",
.firmware = "sd8688.bin",
.reg = &btmrvl_reg_8688,
.sd_blksz_fw_dl = 64,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
.reg = &btmrvl_reg_8787,
.sd_blksz_fw_dl = 256,
};
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
.driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
{ } /* Terminating entry */
};
......@@ -69,7 +113,7 @@ static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
u8 reg;
int ret;
reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
if (!ret)
card->rx_unit = reg;
......@@ -83,11 +127,11 @@ static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
*dat = 0;
fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret)
return -EIO;
fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
if (ret)
return -EIO;
......@@ -101,7 +145,7 @@ static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
u8 reg;
int ret;
reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
if (!ret)
*dat = (u16) reg << card->rx_unit;
......@@ -113,7 +157,7 @@ static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
{
int ret;
sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
if (ret) {
BT_ERR("Unable to enable the host interrupt!");
ret = -EIO;
......@@ -128,13 +172,13 @@ static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
u8 host_int_mask;
int ret;
host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
if (ret)
return -EIO;
host_int_mask &= ~mask;
sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
if (ret < 0) {
BT_ERR("Unable to disable the host interrupt!");
return -EIO;
......@@ -150,7 +194,7 @@ static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
int ret;
for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
status = sdio_readb(card->func, card->reg->card_status, &ret);
if (ret)
goto failed;
if ((status & bits) == bits)
......@@ -299,7 +343,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
u8 base0, base1;
void *tmpfwbuf = NULL;
u8 *fwbuf;
u16 len;
u16 len, blksz_dl = card->sd_blksz_fw_dl;
int txlen = 0, tx_blocks = 0, count = 0;
ret = request_firmware(&fw_firmware, card->firmware,
......@@ -345,7 +389,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
base0 = sdio_readb(card->func,
SQ_READ_BASE_ADDRESS_A0_REG, &ret);
card->reg->sq_read_base_addr_a0, &ret);
if (ret) {
BT_ERR("BASE0 register read failed:"
" base0 = 0x%04X(%d)."
......@@ -355,7 +399,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
goto done;
}
base1 = sdio_readb(card->func,
SQ_READ_BASE_ADDRESS_A1_REG, &ret);
card->reg->sq_read_base_addr_a1, &ret);
if (ret) {
BT_ERR("BASE1 register read failed:"
" base1 = 0x%04X(%d)."
......@@ -403,20 +447,19 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
if (firmwarelen - offset < txlen)
txlen = firmwarelen - offset;
tx_blocks =
(txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
tx_blocks = (txlen + blksz_dl - 1) / blksz_dl;
memcpy(fwbuf, &firmware[offset], txlen);
}
ret = sdio_writesb(card->func, card->ioport, fwbuf,
tx_blocks * SDIO_BLOCK_SIZE);
tx_blocks * blksz_dl);
if (ret < 0) {
BT_ERR("FW download, writesb(%d) failed @%d",
count, offset);
sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
&ret);
sdio_writeb(card->func, HOST_CMD53_FIN,
card->reg->cfg, &ret);
if (ret)
BT_ERR("writeb failed (CFG)");
}
......@@ -597,7 +640,7 @@ static void btmrvl_sdio_interrupt(struct sdio_func *func)
priv = card->priv;
ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_readb: read int status register failed");
return;
......@@ -613,7 +656,7 @@ static void btmrvl_sdio_interrupt(struct sdio_func *func)
sdio_writeb(card->func, ~(ireg) & (DN_LD_HOST_INT_STATUS |
UP_LD_HOST_INT_STATUS),
HOST_INTSTATUS_REG, &ret);
card->reg->host_intstatus, &ret);
if (ret) {
BT_ERR("sdio_writeb: clear int status register failed");
return;
......@@ -664,7 +707,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
goto release_irq;
}
reg = sdio_readb(func, IO_PORT_0_REG, &ret);
reg = sdio_readb(func, card->reg->io_port_0, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
......@@ -672,7 +715,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
card->ioport = reg;
reg = sdio_readb(func, IO_PORT_1_REG, &ret);
reg = sdio_readb(func, card->reg->io_port_1, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
......@@ -680,7 +723,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
card->ioport |= (reg << 8);
reg = sdio_readb(func, IO_PORT_2_REG, &ret);
reg = sdio_readb(func, card->reg->io_port_2, &ret);
if (ret < 0) {
ret = -EIO;
goto release_irq;
......@@ -815,6 +858,8 @@ static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
{
int ret = 0;
u8 fws0;
int pollnum = MAX_POLL_TRIES;
if (!card || !card->func) {
BT_ERR("card or function is NULL!");
......@@ -827,20 +872,36 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
goto done;
}
ret = btmrvl_sdio_download_helper(card);
/* Check if other function driver is downloading the firmware */
fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
if (ret) {
BT_ERR("Failed to download helper!");
BT_ERR("Failed to read FW downloading status!");
ret = -EIO;
goto done;
}
if (fws0) {
BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
/* Give other function more time to download the firmware */
pollnum *= 10;
} else {
if (card->helper) {
ret = btmrvl_sdio_download_helper(card);
if (ret) {
BT_ERR("Failed to download helper!");
ret = -EIO;
goto done;
}
}
if (btmrvl_sdio_download_fw_w_helper(card)) {
BT_ERR("Failed to download firmware!");
ret = -EIO;
goto done;
if (btmrvl_sdio_download_fw_w_helper(card)) {
BT_ERR("Failed to download firmware!");
ret = -EIO;
goto done;
}
}
if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
BT_ERR("FW failed to be active in time!");
ret = -ETIMEDOUT;
goto done;
......@@ -864,7 +925,7 @@ static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
sdio_claim_host(card->func);
sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
sdio_release_host(card->func);
......@@ -893,8 +954,10 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
if (id->driver_data) {
struct btmrvl_sdio_device *data = (void *) id->driver_data;
card->helper = data->helper;
card->helper = data->helper;
card->firmware = data->firmware;
card->reg = data->reg;
card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
}
if (btmrvl_sdio_register_dev(card) < 0) {
......@@ -1011,3 +1074,4 @@ MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
drivers/bluetooth/btmrvl_sdio.h
View file @ 9f72c1d9
......@@ -47,44 +47,46 @@
/* Max retry number of CMD53 write */
#define MAX_WRITE_IOMEM_RETRY 2
/* Host Control Registers */
#define IO_PORT_0_REG 0x00
#define IO_PORT_1_REG 0x01
#define IO_PORT_2_REG 0x02
#define CONFIG_REG 0x03
#define HOST_POWER_UP BIT(1)
#define HOST_CMD53_FIN BIT(2)
#define HOST_INT_MASK_REG 0x04
#define HIM_DISABLE 0xff
#define HIM_ENABLE (BIT(0) | BIT(1))
#define HOST_INTSTATUS_REG 0x05
#define UP_LD_HOST_INT_STATUS BIT(0)
#define DN_LD_HOST_INT_STATUS BIT(1)
/* Card Control Registers */
#define SQ_READ_BASE_ADDRESS_A0_REG 0x10
#define SQ_READ_BASE_ADDRESS_A1_REG 0x11
#define CARD_STATUS_REG 0x20
#define DN_LD_CARD_RDY BIT(0)
#define CARD_IO_READY BIT(3)
#define CARD_FW_STATUS0_REG 0x40
#define CARD_FW_STATUS1_REG 0x41
#define FIRMWARE_READY 0xfedc
#define CARD_RX_LEN_REG 0x42
#define CARD_RX_UNIT_REG 0x43
/* register bitmasks */
#define HOST_POWER_UP BIT(1)
#define HOST_CMD53_FIN BIT(2)
#define HIM_DISABLE 0xff
#define HIM_ENABLE (BIT(0) | BIT(1))
#define UP_LD_HOST_INT_STATUS BIT(0)
#define DN_LD_HOST_INT_STATUS BIT(1)
#define DN_LD_CARD_RDY BIT(0)
#define CARD_IO_READY BIT(3)
#define FIRMWARE_READY 0xfedc
struct btmrvl_sdio_card_reg {
u8 cfg;
u8 host_int_mask;
u8 host_intstatus;
u8 card_status;
u8 sq_read_base_addr_a0;
u8 sq_read_base_addr_a1;
u8 card_revision;
u8 card_fw_status0;
u8 card_fw_status1;
u8 card_rx_len;
u8 card_rx_unit;
u8 io_port_0;
u8 io_port_1;
u8 io_port_2;
};
struct btmrvl_sdio_card {
struct sdio_func *func;
u32 ioport;
const char *helper;
const char *firmware;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
u8 rx_unit;
struct btmrvl_private *priv;
};
......@@ -92,6 +94,8 @@ struct btmrvl_sdio_card {
struct btmrvl_sdio_device {
const char *helper;
const char *firmware;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7