Commit 9fabc03c authored by Rob Herring's avatar Rob Herring Committed by Kleber Sacilotto de Souza

spi: bcm2835aux: ensure interrupts are enabled for shared handler

BugLink: https://bugs.launchpad.net/bugs/1845374

[ Upstream commit bc519d95 ]

The BCM2835 AUX SPI has a shared interrupt line (with AUX UART).
Downstream fixes this with an AUX irqchip to demux the IRQ sources and a
DT change which breaks compatibility with older kernels. The AUX irqchip
was already rejected for upstream[1] and the DT change would break
working systems if the DTB is updated to a newer one. The latter issue
was brought to my attention by Alex Graf.

The root cause however is a bug in the shared handler. Shared handlers
must check that interrupts are actually enabled before servicing the
interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled.

[1] https://patchwork.kernel.org/patch/9781221/

Cc: Alexander Graf <agraf@suse.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-spi@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Reviewed-by: default avatarEric Anholt <eric@anholt.net>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
Signed-off-by: default avatarConnor Kuehl <connor.kuehl@canonical.com>
Signed-off-by: default avatarKhalid Elmously <khalid.elmously@canonical.com>
parent b4663b1b
...@@ -187,6 +187,11 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) ...@@ -187,6 +187,11 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
struct bcm2835aux_spi *bs = spi_master_get_devdata(master); struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
irqreturn_t ret = IRQ_NONE; irqreturn_t ret = IRQ_NONE;
/* IRQ may be shared, so return if our interrupts are disabled */
if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
(BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
return ret;
/* check if we have data to read */ /* check if we have data to read */
while (bs->rx_len && while (bs->rx_len &&
(!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment