scsi: mpi3mr: Add event handling debug prints

Link: https://lore.kernel.org/r/20210520152545.2710479-25-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpi3mr/mpi3mr_fw.c

@@ -154,6 +154,120 @@ void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
 	spin_unlock(&mrioc->sbq_lock);
 }
 
+static void mpi3mr_print_event_data(struct mpi3mr_ioc *mrioc,
+	struct mpi3_event_notification_reply *event_reply)
+{
+	char *desc = NULL;
+	u16 event;
+
+	event = event_reply->event;
+
+	switch (event) {
+	case MPI3_EVENT_LOG_DATA:
+		desc = "Log Data";
+		break;
+	case MPI3_EVENT_CHANGE:
+		desc = "Event Change";
+		break;
+	case MPI3_EVENT_GPIO_INTERRUPT:
+		desc = "GPIO Interrupt";
+		break;
+	case MPI3_EVENT_TEMP_THRESHOLD:
+		desc = "Temperature Threshold";
+		break;
+	case MPI3_EVENT_CABLE_MGMT:
+		desc = "Cable Management";
+		break;
+	case MPI3_EVENT_ENERGY_PACK_CHANGE:
+		desc = "Energy Pack Change";
+		break;
+	case MPI3_EVENT_DEVICE_ADDED:
+	{
+		struct mpi3_device_page0 *event_data =
+		    (struct mpi3_device_page0 *)event_reply->event_data;
+		ioc_info(mrioc, "Device Added: dev=0x%04x Form=0x%x\n",
+		    event_data->dev_handle, event_data->device_form);
+		return;
+	}
+	case MPI3_EVENT_DEVICE_INFO_CHANGED:
+	{
+		struct mpi3_device_page0 *event_data =
+		    (struct mpi3_device_page0 *)event_reply->event_data;
+		ioc_info(mrioc, "Device Info Changed: dev=0x%04x Form=0x%x\n",
+		    event_data->dev_handle, event_data->device_form);
+		return;
+	}
+	case MPI3_EVENT_DEVICE_STATUS_CHANGE:
+	{
+		struct mpi3_event_data_device_status_change *event_data =
+		    (struct mpi3_event_data_device_status_change *)event_reply->event_data;
+		ioc_info(mrioc, "Device status Change: dev=0x%04x RC=0x%x\n",
+		    event_data->dev_handle, event_data->reason_code);
+		return;
+	}
+	case MPI3_EVENT_SAS_DISCOVERY:
+	{
+		struct mpi3_event_data_sas_discovery *event_data =
+		    (struct mpi3_event_data_sas_discovery *)event_reply->event_data;
+		ioc_info(mrioc, "SAS Discovery: (%s) status (0x%08x)\n",
+		    (event_data->reason_code == MPI3_EVENT_SAS_DISC_RC_STARTED) ?
+		    "start" : "stop",
+		    le32_to_cpu(event_data->discovery_status));
+		return;
+	}
+	case MPI3_EVENT_SAS_BROADCAST_PRIMITIVE:
+		desc = "SAS Broadcast Primitive";
+		break;
+	case MPI3_EVENT_SAS_NOTIFY_PRIMITIVE:
+		desc = "SAS Notify Primitive";
+		break;
+	case MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+		desc = "SAS Init Device Status Change";
+		break;
+	case MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW:
+		desc = "SAS Init Table Overflow";
+		break;
+	case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		desc = "SAS Topology Change List";
+		break;
+	case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE:
+		desc = "Enclosure Device Status Change";
+		break;
+	case MPI3_EVENT_HARD_RESET_RECEIVED:
+		desc = "Hard Reset Received";
+		break;
+	case MPI3_EVENT_SAS_PHY_COUNTER:
+		desc = "SAS PHY Counter";
+		break;
+	case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+		desc = "SAS Device Discovery Error";
+		break;
+	case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+		desc = "PCIE Topology Change List";
+		break;
+	case MPI3_EVENT_PCIE_ENUMERATION:
+	{
+		struct mpi3_event_data_pcie_enumeration *event_data =
+		    (struct mpi3_event_data_pcie_enumeration *)event_reply->event_data;
+		ioc_info(mrioc, "PCIE Enumeration: (%s)",
+		    (event_data->reason_code ==
+		    MPI3_EVENT_PCIE_ENUM_RC_STARTED) ? "start" : "stop");
+		if (event_data->enumeration_status)
+			ioc_info(mrioc, "enumeration_status(0x%08x)\n",
+			    le32_to_cpu(event_data->enumeration_status));
+		return;
+	}
+	case MPI3_EVENT_PREPARE_FOR_RESET:
+		desc = "Prepare For Reset";
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	ioc_info(mrioc, "%s\n", desc);
+}
+
 static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
 	struct mpi3_default_reply *def_reply)
 {
@@ -161,6 +275,7 @@ static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
 	    (struct mpi3_event_notification_reply *)def_reply;
 
 	mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count);
+	mpi3mr_print_event_data(mrioc, event_reply);
 	mpi3mr_os_handle_events(mrioc, event_reply);
 }
 

drivers/scsi/mpi3mr/mpi3mr_os.c

@@ -995,6 +995,85 @@ static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc,
 		mpi3mr_tgtdev_put(tgtdev);
 }
 
+/**
+ * mpi3mr_sastopochg_evt_debug - SASTopoChange details
+ * @mrioc: Adapter instance reference
+ * @event_data: SAS topology change list event data
+ *
+ * Prints information about the SAS topology change event.
+ *
+ * Return: Nothing.
+ */
+static void
+mpi3mr_sastopochg_evt_debug(struct mpi3mr_ioc *mrioc,
+	struct mpi3_event_data_sas_topology_change_list *event_data)
+{
+	int i;
+	u16 handle;
+	u8 reason_code, phy_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->exp_status) {
+	case MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI3_EVENT_SAS_TOPO_ES_RESPONDING:
+		status_str =  "responding";
+		break;
+	case MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	case MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER:
+		status_str = "direct attached";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	ioc_info(mrioc, "%s :sas topology change: (%s)\n",
+	    __func__, status_str);
+	ioc_info(mrioc,
+	    "%s :\texpander_handle(0x%04x), enclosure_handle(0x%04x) start_phy(%02d), num_entries(%d)\n",
+	    __func__, le16_to_cpu(event_data->expander_dev_handle),
+	    le16_to_cpu(event_data->enclosure_handle),
+	    event_data->start_phy_num, event_data->num_entries);
+	for (i = 0; i < event_data->num_entries; i++) {
+		handle = le16_to_cpu(event_data->phy_entry[i].attached_dev_handle);
+		if (!handle)
+			continue;
+		phy_number = event_data->start_phy_num + i;
+		reason_code = event_data->phy_entry[i].status &
+		    MPI3_EVENT_SAS_TOPO_PHY_RC_MASK;
+		switch (reason_code) {
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED:
+			status_str = "link status change";
+			break;
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE:
+			status_str = "link status no change";
+			break;
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->phy_entry[i].link_rate >> 4;
+		prev_link_rate = event_data->phy_entry[i].link_rate & 0xF;
+		ioc_info(mrioc,
+		    "%s :\tphy(%02d), attached_handle(0x%04x): %s: link rate: new(0x%02x), old(0x%02x)\n",
+		    __func__, phy_number, handle, status_str, link_rate,
+		    prev_link_rate);
+	}
+}
+
 /**
  * mpi3mr_sastopochg_evt_bh - SASTopologyChange evt bottomhalf
  * @mrioc: Adapter instance reference
@@ -1016,6 +1095,8 @@ static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
 	u8 reason_code;
 	struct mpi3mr_tgt_dev *tgtdev = NULL;
 
+	mpi3mr_sastopochg_evt_debug(mrioc, event_data);
+
 	for (i = 0; i < event_data->num_entries; i++) {
 		handle = le16_to_cpu(event_data->phy_entry[i].attached_dev_handle);
 		if (!handle)
@@ -1042,6 +1123,88 @@ static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
 	}
 }
 
+/**
+ * mpi3mr_pcietopochg_evt_debug - PCIeTopoChange details
+ * @mrioc: Adapter instance reference
+ * @event_data: PCIe topology change list event data
+ *
+ * Prints information about the PCIe topology change event.
+ *
+ * Return: Nothing.
+ */
+static void
+mpi3mr_pcietopochg_evt_debug(struct mpi3mr_ioc *mrioc,
+	struct mpi3_event_data_pcie_topology_change_list *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 port_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->switch_status) {
+	case MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI3_EVENT_PCIE_TOPO_SS_RESPONDING:
+		status_str =  "responding";
+		break;
+	case MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	case MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH:
+		status_str = "direct attached";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	ioc_info(mrioc, "%s :pcie topology change: (%s)\n",
+	    __func__, status_str);
+	ioc_info(mrioc,
+	    "%s :\tswitch_handle(0x%04x), enclosure_handle(0x%04x) start_port(%02d), num_entries(%d)\n",
+	    __func__, le16_to_cpu(event_data->switch_dev_handle),
+	    le16_to_cpu(event_data->enclosure_handle),
+	    event_data->start_port_num, event_data->num_entries);
+	for (i = 0; i < event_data->num_entries; i++) {
+		handle =
+		    le16_to_cpu(event_data->port_entry[i].attached_dev_handle);
+		if (!handle)
+			continue;
+		port_number = event_data->start_port_num + i;
+		reason_code = event_data->port_entry[i].port_status;
+		switch (reason_code) {
+		case MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+			status_str = "link status change";
+			break;
+		case MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE:
+			status_str = "link status no change";
+			break;
+		case MPI3_EVENT_PCIE_TOPO_PS_RESPONDING:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->port_entry[i].current_port_info &
+		    MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		prev_link_rate = event_data->port_entry[i].previous_port_info &
+		    MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		ioc_info(mrioc,
+		    "%s :\tport(%02d), attached_handle(0x%04x): %s: link rate: new(0x%02x), old(0x%02x)\n",
+		    __func__, port_number, handle, status_str, link_rate,
+		    prev_link_rate);
+	}
+}
+
 /**
  * mpi3mr_pcietopochg_evt_bh - PCIeTopologyChange evt bottomhalf
  * @mrioc: Adapter instance reference
@@ -1063,6 +1226,8 @@ static void mpi3mr_pcietopochg_evt_bh(struct mpi3mr_ioc *mrioc,
 	u8 reason_code;
 	struct mpi3mr_tgt_dev *tgtdev = NULL;
 
+	mpi3mr_pcietopochg_evt_debug(mrioc, event_data);
+
 	for (i = 0; i < event_data->num_entries; i++) {
 		handle =
 		    le16_to_cpu(event_data->port_entry[i].attached_dev_handle);
@@ -1899,7 +2064,6 @@ static void mpi3mr_setup_eedp(struct mpi3mr_ioc *mrioc,
 	scsiio_req->sgl[0].eedp.flags = MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED;
 }
 
-
 /**
  * mpi3mr_build_sense_buffer - Map sense information
  * @desc: Sense type