Commit a035254a authored by Roland Stigge's avatar Roland Stigge Committed by Olof Johansson

ARM: LPC32xx: Adjust dts files to gpio dt binding

The GPIO devicetree binding in 3.5 doesn't register the various LPC32xx GPIO
banks via DT subnodes but always all at once, and changes the gpio referencing
to 3 cells (bank, gpio, flags). This patch adjusts the DTS files to this
binding that was just accepted to the gpio subsystem.
Signed-off-by: default avatarRoland Stigge <stigge@antcom.de>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent af56e0aa
......@@ -215,45 +215,8 @@ rtc@40024000 {
gpio: gpio@40028000 {
compatible = "nxp,lpc3220-gpio";
reg = <0x40028000 0x1000>;
/* create a private address space for enumeration */
#address-cells = <1>;
#size-cells = <0>;
gpio_p0: gpio-bank@0 {
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
};
gpio_p1: gpio-bank@1 {
gpio-controller;
#gpio-cells = <2>;
reg = <1>;
};
gpio_p2: gpio-bank@2 {
gpio-controller;
#gpio-cells = <2>;
reg = <2>;
};
gpio_p3: gpio-bank@3 {
gpio-controller;
#gpio-cells = <2>;
reg = <3>;
};
gpi_p3: gpio-bank@4 {
gpio-controller;
#gpio-cells = <2>;
reg = <4>;
};
gpo_p3: gpio-bank@5 {
gpio-controller;
#gpio-cells = <2>;
reg = <5>;
};
#gpio-cells = <3>; /* bank, pin, flags */
};
watchdog@4003C000 {
......
......@@ -131,13 +131,13 @@ leds {
compatible = "gpio-leds";
led0 {
gpios = <&gpo_p3 1 1>; /* GPO_P3 1, GPIO 80, active low */
gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */
linux,default-trigger = "heartbeat";
default-state = "off";
};
led1 {
gpios = <&gpo_p3 14 1>; /* GPO_P3 14, GPIO 93, active low */
gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
linux,default-trigger = "timer";
default-state = "off";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment