Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86:
  x86: enable "make ARCH=x86"
  x86: do not use $(ARCH) when not needed
  kconfig: use $K64BIT to set 64BIT with all*config targets
  kconfig: add helper to set config symbol from environment variable
  kconfig: factor out code in confdata.c
  x86: move the rest of the menu's to Kconfig
  x86: move all simple arch settings to Kconfig
  x86: copy x86_64 specific Kconfig symbols to Kconfig.i386
  x86: add X86_64 dependency to x86_64 specific symbols in Kconfig.x86_64
  x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386
  x86: arch/x86/Kconfig.cpu unification
  x86: start unification of arch/x86/Kconfig.*
  x86: unification of cfufreq/Kconfig

Makefile

@@ -197,8 +197,15 @@ CROSS_COMPILE	?=
 UTS_MACHINE 	:= $(ARCH)
 SRCARCH 	:= $(ARCH)
 
-# for i386 and x86_64 we use SRCARCH equal to x86
-SRCARCH := $(if $(filter x86_64 i386,$(SRCARCH)),x86,$(SRCARCH))
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+        K64BIT  := n
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+        K64BIT  := y
+endif
 
 KCONFIG_CONFIG	?= .config
 
@@ -334,7 +341,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
-export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export ARCH SRCARCH K64BIT CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 

README

@@ -194,6 +194,8 @@ CONFIGURING the kernel:
    "make *config" checks for a file named "all{yes/mod/no/random}.config"
    for symbol values that are to be forced.  If this file is not found,
    it checks for a file named "all.config" to contain forced values.
+   Finally it checks the environment variable K64BIT and if found, sets
+   the config symbol "64BIT" to the value of the K64BIT variable.
    
 	NOTES on "make config":
 	- having unnecessary drivers will make the kernel bigger, and can

arch/x86/Kconfig.cpu

@@ -3,11 +3,12 @@ if !X86_ELAN
 
 choice
 	prompt "Processor family"
-	default M686
+	default M686 if X86_32
+	default GENERIC_CPU if X86_64
 
 config M386
 	bool "386"
-	depends on !UML
+	depends on X86_32 && !UML
 	---help---
 	  This is the processor type of your CPU. This information is used for
 	  optimizing purposes. In order to compile a kernel that can run on
@@ -49,6 +50,7 @@ config M386
 
 config M486
 	bool "486"
+	depends on X86_32
 	help
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
@@ -57,6 +59,7 @@ config M486
 
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
+	depends on X86_32
 	help
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
@@ -64,18 +67,21 @@ config M586
 
 config M586TSC
 	bool "Pentium-Classic"
+	depends on X86_32
 	help
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
 	bool "Pentium-MMX"
+	depends on X86_32
 	help
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 
 config M686
 	bool "Pentium-Pro"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
@@ -83,6 +89,7 @@ config M686
 
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
+	depends on X86_32
 	help
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
@@ -92,6 +99,7 @@ config MPENTIUMII
 
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	depends on X86_32
 	help
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
@@ -100,19 +108,14 @@ config MPENTIUMIII
 
 config MPENTIUMM
 	bool "Pentium M"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
-config MCORE2
-	bool "Core 2/newer Xeon"
-	help
-	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-	  CPUs. You can distinguish newer from older Xeons by the CPU family
-	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
-
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
@@ -148,6 +151,7 @@ config MPENTIUM4
 
 config MK6
 	bool "K6/K6-II/K6-III"
+	depends on X86_32
 	help
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
@@ -155,6 +159,7 @@ config MK6
 
 config MK7
 	bool "Athlon/Duron/K7"
+	depends on X86_32
 	help
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
@@ -169,6 +174,7 @@ config MK8
 
 config MCRUSOE
 	bool "Crusoe"
+	depends on X86_32
 	help
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
@@ -176,11 +182,13 @@ config MCRUSOE
 
 config MEFFICEON
 	bool "Efficeon"
+	depends on X86_32
 	help
 	  Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
 	bool "Winchip-C6"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -188,6 +196,7 @@ config MWINCHIPC6
 
 config MWINCHIP2
 	bool "Winchip-2"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip-2.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -195,6 +204,7 @@ config MWINCHIP2
 
 config MWINCHIP3D
 	bool "Winchip-2A/Winchip-3"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -204,16 +214,19 @@ config MWINCHIP3D
 
 config MGEODEGX1
 	bool "GeodeGX1"
+	depends on X86_32
 	help
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
        bool "Geode GX/LX"
+	depends on X86_32
        help
          Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
+	depends on X86_32
 	help
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
@@ -225,6 +238,7 @@ config MCYRIXIII
 
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
+	depends on X86_32
 	help
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
@@ -232,15 +246,42 @@ config MVIAC3_2
 
 config MVIAC7
 	bool "VIA C7"
+	depends on X86_32
 	help
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 
+config MPSC
+	bool "Intel P4 / older Netburst based Xeon"
+	depends on X86_64
+	help
+	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
+	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
+	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
+          Netburst core and shouldn't use this option. You can distinguish them
+	  using the cpu family field
+	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
+
+config MCORE2
+	bool "Core 2/newer Xeon"
+	help
+	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+	  CPUs. You can distinguish newer from older Xeons by the CPU family
+	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+config GENERIC_CPU
+	bool "Generic-x86-64"
+	depends on X86_64
+	help
+	  Generic x86-64 CPU.
+	  Run equally well on all x86-64 CPUs.
+
 endchoice
 
 config X86_GENERIC
-       bool "Generic x86 support"
-       help
+	bool "Generic x86 support"
+	depends on X86_32
+	help
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -253,44 +294,31 @@ endif
 
 #
 # Define implied options from the CPU selection here
-#
+config X86_L1_CACHE_BYTES
+	int
+	default "128" if GENERIC_CPU || MPSC
+	default "64" if MK8 || MCORE2
+	depends on X86_64
+
+config X86_INTERNODE_CACHE_BYTES
+	int
+	default "4096" if X86_VSMP
+	default X86_L1_CACHE_BYTES if !X86_VSMP
+	depends on X86_64
+
 config X86_CMPXCHG
-	bool
-	depends on !M386
-	default y
+	def_bool X86_64 || (X86_32 && !M386)
 
 config X86_L1_CACHE_SHIFT
 	int
-	default "7" if MPENTIUM4 || X86_GENERIC
+	default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
 
 config X86_XADD
 	bool
-	depends on !M386
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	depends on !X86_XADD
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	depends on X86_XADD
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
+	depends on X86_32 && !M386
 	default y
 
 config X86_PPRO_FENCE
@@ -305,22 +333,22 @@ config X86_F00F_BUG
 
 config X86_WP_WORKS_OK
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_INVLPG
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_BSWAP
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_POPAD_OK
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_ALIGNMENT_16
@@ -330,7 +358,7 @@ config X86_ALIGNMENT_16
 
 config X86_GOOD_APIC
 	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
 	default y
 
 config X86_INTEL_USERCOPY
@@ -355,7 +383,7 @@ config X86_OOSTORE
 
 config X86_TSC
 	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
+	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
 	default y
 
 # this should be set for all -march=.. options where the compiler
@@ -367,6 +395,7 @@ config X86_CMOV
 
 config X86_MINIMUM_CPU_FAMILY
 	int
-	default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+	default "64" if X86_64
+	default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
 	default "3"
 

arch/x86/Makefile

 # Unified Makefile for i386 and x86_64
 
 # select defconfig based on actual architecture
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
+ifeq ($(ARCH),x86)
+        KBUILD_DEFCONFIG := i386_defconfig
+else
+        KBUILD_DEFCONFIG := $(ARCH)_defconfig
+endif
 
-# # No need to remake these files
+# No need to remake these files
 $(srctree)/arch/x86/Makefile%: ;
 
-ifeq ($(ARCH),i386)
+ifeq ($(CONFIG_X86_32),y)
         include $(srctree)/arch/x86/Makefile_32
 else
         include $(srctree)/arch/x86/Makefile_64

arch/x86/Makefile_32

@@ -160,7 +160,7 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/x86/boot
 
 define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install	- Install kernel using'
   echo  '		   (your) ~/bin/installkernel or'
   echo  '		   (distribution) /sbin/installkernel or'
@@ -170,6 +170,6 @@ define archhelp
   echo  '  isoimage     - Create a boot CD-ROM image'
 endef
 
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
-	       arch/$(ARCH)/boot/image.iso \
-	       arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf

arch/x86/Makefile_64

@@ -127,7 +127,7 @@ archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
 define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install	- Install kernel using'
   echo  '		   (your) ~/bin/installkernel or'
   echo  '		   (distribution) /sbin/installkernel or'
@@ -137,8 +137,8 @@ define archhelp
   echo  '  isoimage     - Create a boot CD-ROM image'
 endef
 
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
-	       arch/$(ARCH)/boot/image.iso \
-	       arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf
 
 

arch/x86/boot/Makefile

@@ -49,10 +49,10 @@ HOSTCFLAGS_build.o := $(LINUXINCLUDE)
 
 # How to compile the 16-bit code.  Note we always compile for -march=i386,
 # that way we can complain to the user if the CPU is insufficient.
-cflags-i386   := 
-cflags-x86_64 := -m32
+cflags-$(CONFIG_X86_32) :=
+cflags-$(CONFIG_X86_64) := -m32
 KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-		   $(cflags-$(ARCH)) \
+		   $(cflags-y) \
 		   -Wall -Wstrict-prototypes \
 		   -march=i386 -mregparm=3 \
 		   -include $(srctree)/$(src)/code16gcc.h \

arch/x86/boot/cpucheck.c

@@ -42,13 +42,7 @@ static struct cpu_features cpu;
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
-#ifdef CONFIG_X86_64
-static const int req_level = 64;
-#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY)
 static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY;
-#else
-static const int req_level = 3;
-#endif
 
 static const u32 req_flags[NCAPINTS] =
 {

arch/x86/kernel/Makefile_32

@@ -3,6 +3,7 @@
 #
 
 extra-y := head_32.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ui386
 
 obj-y	:= process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
 		ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
@@ -60,7 +61,7 @@ quiet_cmd_syscall = SYSCALL $@
       cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
 		          -Wl,-T,$(filter-out FORCE,$^) -o $@
 
-export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vsyscall_32.lds += -P -C -Ui386
 
 vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
 		 $(call ld-option, -Wl$(comma)--hash-style=sysv)

arch/x86/kernel/Makefile_64

@@ -3,7 +3,9 @@
 #
 
 extra-y 	:= head_64.o head64.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ux86_64
 EXTRA_AFLAGS	:= -traditional
+
 obj-y	:= process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
 		ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
 		x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \

arch/x86/kernel/cpu/cpufreq/Kconfig_32 → arch/x86/kernel/cpu/cpufreq/Kconfig

@@ -19,6 +19,9 @@ config X86_ACPI_CPUFREQ
 	  Processor Performance States.
 	  This driver also supports Intel Enhanced Speedstep.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -26,7 +29,7 @@ config X86_ACPI_CPUFREQ
 config ELAN_CPUFREQ
 	tristate "AMD Elan SC400 and SC410"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on X86_32 && X86_ELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
 	  processors.
@@ -42,7 +45,7 @@ config ELAN_CPUFREQ
 config SC520_CPUFREQ
 	tristate "AMD Elan SC520"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on X86_32 && X86_ELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC520 processor.
 
@@ -54,6 +57,7 @@ config SC520_CPUFREQ
 config X86_POWERNOW_K6
 	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
 	  AMD K6-3+ processors.
@@ -65,6 +69,7 @@ config X86_POWERNOW_K6
 config X86_POWERNOW_K7
 	tristate "AMD Mobile Athlon/Duron PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
 
@@ -76,23 +81,27 @@ config X86_POWERNOW_K7_ACPI
 	bool
 	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
 	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+	depends on X86_32
 	default y
 
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
 
 config X86_POWERNOW_K8_ACPI
-	bool "ACPI Support"
-	select ACPI_PROCESSOR
-	depends on ACPI && X86_POWERNOW_K8
+	bool
+	prompt "ACPI Support" if X86_32
+	depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
 	default y
 	help
 	  This provides access to the K8s Processor Performance States via ACPI.
@@ -104,7 +113,7 @@ config X86_POWERNOW_K8_ACPI
 
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
-	depends on PCI
+	depends on X86_32 && PCI
 	help
 	 This add the CPUFreq driver for NatSemi Geode processors which
 	 support suspend modulation.
@@ -114,15 +123,20 @@ config X86_GX_SUSPMOD
 	 If in doubt, say N.
 
 config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep"
+	tristate "Intel Enhanced SpeedStep (deprecated)"
 	select CPU_FREQ_TABLE
-	select X86_SPEEDSTEP_CENTRINO_TABLE
+	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
+	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
 	help
+	  This is deprecated and this functionality is now merged into
+	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+	  speedstep_centrino.
 	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
-	  you also need to say Y to "Use ACPI tables to decode..." below
-	  [which might imply enabling ACPI] if you want to use this driver
-	  on non-Banias CPUs.
+	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
+	  or 64bit enabled Intel Xeons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
@@ -130,7 +144,7 @@ config X86_SPEEDSTEP_CENTRINO
 
 config X86_SPEEDSTEP_CENTRINO_TABLE
 	bool "Built-in tables for Banias CPUs"
-	depends on X86_SPEEDSTEP_CENTRINO
+	depends on X86_32 && X86_SPEEDSTEP_CENTRINO
 	default y
 	help
 	  Use built-in tables for Banias CPUs if ACPI encoding
@@ -141,6 +155,7 @@ config X86_SPEEDSTEP_CENTRINO_TABLE
 config X86_SPEEDSTEP_ICH
 	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
 	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
@@ -154,7 +169,7 @@ config X86_SPEEDSTEP_ICH
 config X86_SPEEDSTEP_SMI
 	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
 	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)
@@ -169,15 +184,24 @@ config X86_P4_CLOCKMOD
 	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
-	  processors.
+	  processors.  When enabled it will lower CPU temperature by skipping
+	  clocks.
+
+	  This driver should be only used in exceptional
+	  circumstances when very low power is needed because it causes severe
+	  slowdowns and noticeable latencies.  Normally Speedstep should be used
+	  instead.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
-	  If in doubt, say N.
+	  Unless you are absolutely sure say N.
 
 config X86_CPUFREQ_NFORCE2
 	tristate "nVidia nForce2 FSB changing"
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
 	  platforms.
@@ -188,6 +212,7 @@ config X86_CPUFREQ_NFORCE2
 
 config X86_LONGRUN
 	tristate "Transmeta LongRun"
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
 	  which support LongRun.
@@ -199,7 +224,7 @@ config X86_LONGRUN
 config X86_LONGHAUL
 	tristate "VIA Cyrix III Longhaul"
 	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
+	depends on X86_32 && ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
 	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
@@ -212,7 +237,7 @@ config X86_LONGHAUL
 config X86_E_POWERSAVER
 	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.
 
@@ -233,11 +258,11 @@ config X86_ACPI_CPUFREQ_PROC_INTF
 
 config X86_SPEEDSTEP_LIB
 	tristate
-	default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
 
 config X86_SPEEDSTEP_RELAXED_CAP_CHECK
 	bool "Relaxed speedstep capability checks"
-	depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+	depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
 	help
 	  Don't perform all checks for a speedstep capable system which would
 	  normally be done. Some ancient or strange systems, though speedstep

arch/x86/kernel/cpu/cpufreq/Kconfig_64

-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config X86_POWERNOW_K8
-	tristate "AMD Opteron/Athlon64 PowerNow!"
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powernow-k8.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_POWERNOW_K8_ACPI
-	bool
-	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
-	default y
-
-config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep (deprecated)"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This is deprecated and this functionality is now merged into
-	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
-	  speedstep_centrino.
-	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
-	  or 64bit enabled Intel Xeons.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called speedstep-centrino.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This driver adds a CPUFreq driver which utilizes the ACPI
-	  Processor Performance States.
-	  This driver also supports Intel Enhanced Speedstep.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acpi-cpufreq.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-comment "shared options"
-
-config X86_ACPI_CPUFREQ_PROC_INTF
-	bool "/proc/acpi/processor/../performance interface (deprecated)"
-	depends on PROC_FS
-	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI
-	help
-	  This enables the deprecated /proc/acpi/processor/../performance
-	  interface. While it is helpful for debugging, the generic,
-	  cross-architecture cpufreq interfaces should be used.
-
-	  If in doubt, say N.
-
-config X86_P4_CLOCKMOD
-	tristate "Intel Pentium 4 clock modulation"
-	depends on EMBEDDED
-	select CPU_FREQ_TABLE
-	help
-	  This adds the clock modulation driver for Intel Pentium 4 / XEON
-	  processors.  When enabled it will lower CPU temperature by skipping
-	  clocks.
-
-	  This driver should be only used in exceptional
-	  circumstances when very low power is needed because it causes severe
-	  slowdowns and noticeable latencies.  Normally Speedstep should be used
-	  instead.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called p4-clockmod.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  Unless you are absolutely sure say N.
-
-
-config X86_SPEEDSTEP_LIB
-	tristate
-	default X86_P4_CLOCKMOD
-
-endif
-
-endmenu

arch/x86/vdso/Makefile

@@ -20,7 +20,7 @@ quiet_cmd_syscall = SYSCALL $@
       cmd_syscall = $(CC) -m elf_x86_64 -nostdlib $(SYSCFLAGS_$(@F)) \
 		          -Wl,-T,$(filter-out FORCE,$^) -o $@
 
-export CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vdso.lds += -P -C
 
 vdso-flags = -fPIC -shared -Wl,-soname=linux-vdso.so.1 \
 		 $(call ld-option, -Wl$(comma)--hash-style=sysv) \

scripts/kconfig/Makefile

@@ -4,12 +4,7 @@
 
 PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
 
-# If a arch/$(SRCARCH)/Kconfig.$(ARCH) file exist use it
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/Kconfig.$(ARCH)),)
-        Kconfig := arch/$(SRCARCH)/Kconfig.$(ARCH)
-else
-        Kconfig := arch/$(SRCARCH)/Kconfig
-endif
+Kconfig := arch/$(SRCARCH)/Kconfig
 
 xconfig: $(obj)/qconf
 	$< $(Kconfig)

scripts/kconfig/conf.c

@@ -591,6 +591,7 @@ int main(int ac, char **av)
 			conf_read_simple(name, S_DEF_USER);
 		else if (!stat("all.config", &tmpstat))
 			conf_read_simple("all.config", S_DEF_USER);
+		conf_set_env_sym("K64BIT", "64BIT", S_DEF_USER);
 		break;
 	default:
 		break;

scripts/kconfig/confdata.c

@@ -83,6 +83,95 @@ char *conf_get_default_confname(void)
 	return name;
 }
 
+static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
+{
+	char *p2;
+
+	switch (sym->type) {
+	case S_TRISTATE:
+		if (p[0] == 'm') {
+			sym->def[def].tri = mod;
+			sym->flags |= def_flags;
+			break;
+		}
+	case S_BOOLEAN:
+		if (p[0] == 'y') {
+			sym->def[def].tri = yes;
+			sym->flags |= def_flags;
+			break;
+		}
+		if (p[0] == 'n') {
+			sym->def[def].tri = no;
+			sym->flags |= def_flags;
+			break;
+		}
+		conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+		break;
+	case S_OTHER:
+		if (*p != '"') {
+			for (p2 = p; *p2 && !isspace(*p2); p2++)
+				;
+			sym->type = S_STRING;
+			goto done;
+		}
+	case S_STRING:
+		if (*p++ != '"')
+			break;
+		for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
+			if (*p2 == '"') {
+				*p2 = 0;
+				break;
+			}
+			memmove(p2, p2 + 1, strlen(p2));
+		}
+		if (!p2) {
+			conf_warning("invalid string found");
+			return 1;
+		}
+	case S_INT:
+	case S_HEX:
+	done:
+		if (sym_string_valid(sym, p)) {
+			sym->def[def].val = strdup(p);
+			sym->flags |= def_flags;
+		} else {
+			conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+			return 1;
+		}
+		break;
+	default:
+		;
+	}
+	return 0;
+}
+
+/* Read an environment variable and assign the value to the symbol */
+int conf_set_env_sym(const char *env, const char *symname, int def)
+{
+	struct symbol *sym;
+	char *p;
+	int def_flags;
+
+	p = getenv(env);
+	if (p) {
+		char warning[200];
+		sprintf(warning, "Environment variable (%s = \"%s\")", env, p);
+		conf_filename = warning;
+		def_flags = SYMBOL_DEF << def;
+		if (def == S_DEF_USER) {
+			sym = sym_find(symname);
+			if (!sym)
+				return 1;
+		} else {
+			sym = sym_lookup(symname, 0);
+			if (sym->type == S_UNKNOWN)
+				sym->type = S_OTHER;
+		}
+		conf_set_sym_val(sym, def, def_flags, p);
+	}
+	return 0;
+}
+
 int conf_read_simple(const char *name, int def)
 {
 	FILE *in = NULL;
@@ -213,61 +302,8 @@ int conf_read_simple(const char *name, int def)
 				conf_warning("trying to reassign symbol %s", sym->name);
 				break;
 			}
-			switch (sym->type) {
-			case S_TRISTATE:
-				if (p[0] == 'm') {
-					sym->def[def].tri = mod;
-					sym->flags |= def_flags;
-					break;
-				}
-			case S_BOOLEAN:
-				if (p[0] == 'y') {
-					sym->def[def].tri = yes;
-					sym->flags |= def_flags;
-					break;
-				}
-				if (p[0] == 'n') {
-					sym->def[def].tri = no;
-					sym->flags |= def_flags;
-					break;
-				}
-				conf_warning("symbol value '%s' invalid for %s", p, sym->name);
-				break;
-			case S_OTHER:
-				if (*p != '"') {
-					for (p2 = p; *p2 && !isspace(*p2); p2++)
-						;
-					sym->type = S_STRING;
-					goto done;
-				}
-			case S_STRING:
-				if (*p++ != '"')
-					break;
-				for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
-					if (*p2 == '"') {
-						*p2 = 0;
-						break;
-					}
-					memmove(p2, p2 + 1, strlen(p2));
-				}
-				if (!p2) {
-					conf_warning("invalid string found");
-					continue;
-				}
-			case S_INT:
-			case S_HEX:
-			done:
-				if (sym_string_valid(sym, p)) {
-					sym->def[def].val = strdup(p);
-					sym->flags |= def_flags;
-				} else {
-					conf_warning("symbol value '%s' invalid for %s", p, sym->name);
-					continue;
-				}
-				break;
-			default:
-				;
-			}
+			if (conf_set_sym_val(sym, def, def_flags, p))
+				continue;
 			break;
 		case '\r':
 		case '\n':

scripts/kconfig/lkc_proto.h

 
 /* confdata.c */
 P(conf_parse,void,(const char *name));
+P(conf_set_env_sym,int,(const char *envname, const char *symname, int def));
 P(conf_read,int,(const char *name));
 P(conf_read_simple,int,(const char *name, int));
 P(conf_write,int,(const char *name));