Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x

@@ -516,3 +516,11 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(Read) Returns the number of special conditional P1 right-hand keys
 		that the trace unit can use (0x194).  The value is taken
 		directly from the HW.
+
+What:		/sys/bus/coresight/devices/etm<N>/ts_source
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com>
+Description:	(Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for
+		trace session. Otherwise -1 indicates an unknown time source. Check
+		trcidr0.tssize to see if a global timestamp is available.

Documentation/ABI/testing/sysfs-bus-counter

@@ -4,6 +4,12 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Count data of Count Y represented as a string.
 
+What:		/sys/bus/counter/devices/counterX/countY/capture
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Historical capture of the Count Y count data.
+
 What:		/sys/bus/counter/devices/counterX/countY/ceiling
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -203,6 +209,13 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/num_overflows
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute indicates the number of overflows of count Y.
+
+What:		/sys/bus/counter/devices/counterX/countY/capture_component_id
 What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
 What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
 What:		/sys/bus/counter/devices/counterX/countY/count_mode_component_id
@@ -213,11 +226,14 @@ What:		/sys/bus/counter/devices/counterX/countY/prescaler_component_id
 What:		/sys/bus/counter/devices/counterX/countY/preset_component_id
 What:		/sys/bus/counter/devices/counterX/countY/preset_enable_component_id
 What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+What:		/sys/bus/counter/devices/counterX/countY/num_overflows_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/polarity_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/frequency_component_id
 KernelVersion:	5.16
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -303,6 +319,19 @@ Description:
 		Discrete set of available values for the respective Signal Y
 		configuration are listed in this file.
 
+What:		/sys/bus/counter/devices/counterX/signalY/polarity
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Active level of Signal Y. The following polarity values are
+		available:
+
+		positive:
+			Signal high state considered active level (rising edge).
+
+		negative:
+			Signal low state considered active level (falling edge).
+
 What:		/sys/bus/counter/devices/counterX/signalY/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -345,3 +374,9 @@ Description:
 			via index_polarity. The index function (as enabled via
 			preset_enable) is performed synchronously with the
 			quadrature clock on the active level of the index input.
+
+What:		/sys/bus/counter/devices/counterX/signalY/frequency
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the signal Y frequency, in Hz.

Documentation/ABI/testing/sysfs-bus-iio

@@ -196,7 +196,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -207,6 +207,25 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are nanofarads.
 
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For differential channels, this an offset that is applied
+		equally to both inputs. As the reading is of the difference
+		between the two inputs, this should not be applied to the _raw
+		reading by userspace (unlike _offset) and unlike calibbias
+		it does not affect the differential value measured because
+		the effect of _zeropoint cancels out across the two inputs
+		that make up the differential pair. It's purpose is to bring
+		the individual signals, before the differential is measured,
+		within the measurement range of the device. The naming is
+		chosen because if the separate inputs that make the
+		differential pair are drawn on a graph in their
+		_raw  units, this is the value that the zero point on the
+		measurement axis represents. It is expressed with the
+		same scaling as _raw.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -241,6 +260,15 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		As per in_accel_X_raw attributes, but minus the
+		acceleration due to gravity.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -2038,3 +2066,99 @@ Description:
 		Available range for the forced calibration value, expressed as:
 
 		- a range specified as "[min step max]"
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
+KernelVersion:	5.20
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some devices have separate controls of sampling frequency for
+		individual channels. If multiple channels are enabled in a scan,
+		then the sampling_frequency of the scan may be computed from the
+		per channel sampling frequencies.
+
+What:		/sys/.../events/in_accel_gesture_singletap_en
+What:		/sys/.../events/in_accel_gesture_doubletap_en
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Device generates an event on a single or double tap.
+
+What:		/sys/.../events/in_accel_gesture_singletap_value
+What:		/sys/.../events/in_accel_gesture_doubletap_value
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the threshold value that the device is comparing
+		against to generate the tap gesture event. The lower
+		threshold value increases the sensitivity of tap detection.
+		Units and the exact meaning of value are device-specific.
+
+What:		/sys/.../events/in_accel_gesture_tap_value_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available threshold values which can be used to
+		modify the sensitivity of the tap detection.
+
+What:		/sys/.../events/in_accel_gesture_singletap_reset_timeout
+What:		/sys/.../events/in_accel_gesture_doubletap_reset_timeout
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the timeout value in seconds for the tap detector
+		to not to look for another tap event after the event as
+		occurred. Basically the minimum quiet time between the two
+		single-tap's or two double-tap's.
+
+What:		/sys/.../events/in_accel_gesture_tap_reset_timeout_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available tap reset timeout values. Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the minimum quiet time in seconds between the two
+		taps of a double tap.
+
+What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available delay values between two taps in the double
+		tap. Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the maximum time difference allowed between upper
+		and lower peak of tap to consider it as the valid tap event.
+		Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available time values between upper peak to lower
+		peak. Units in seconds.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) euler angles readings. Units after
+		application of scale are deg.
+
+What:		/sys/bus/iio/devices/iio:deviceX/serialnumber
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		An example format is 16-bytes, 2-digits-per-byte, HEX-string
+		representing the sensor unique ID number.

Documentation/ABI/testing/sysfs-bus-iio-bno055

+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) range for acceleration readings. Unit after
+		application of scale is m/s^2. Note that this doesn't affects
+		the scale (which should be used when changing the maximum and
+		minimum readable value affects also the reading scaling factor).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Range for angular velocity readings in radians per second. Note
+		that this does not affects the scale (which should be used when
+		changing the maximum and minimum readable value affects also the
+		reading scaling factor).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of allowed values for in_accel_raw_range attribute
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of allowed values for in_anglvel_raw_range attribute
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Can be 1 or 0. Enables/disables the "Fast Magnetometer
+		Calibration" HW function.
+
+What:		/sys/bus/iio/devices/iio:deviceX/fusion_enable
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
+		NDOF) HW function.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_data
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the binary calibration data blob for the IMU sensors.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the accelerometer sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the gyroscope sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the magnetometer sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the status for the IMU overall autocalibration.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.

Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746

+What:		/sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
+What:		/sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Write 1 to trigger a calibration of the calibbias or
+		calibscale. For calibscale, a full scale capacitance should
+		be connected to the capacitance input and a
+		calibscale_calibration then started.  For calibbias see
+		the device datasheet section on "capacitive system offset
+		calibration".

Documentation/ABI/testing/sysfs-devices-hisi_ptt

+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	This directory contains files for tuning the PCIe link
+		parameters(events). Each file is named after the event
+		of the PCIe link.
+
+		See Documentation/trace/hisi-ptt.rst for more information.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Controls the weight of Tx completion TLPs, which influence
+		the proportion of outbound completion TLPs on the PCIe link.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
+		the proportion of outbound non-posted TLPs on the PCIe link.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
+		proportion of outbound posted TLPs on the PCIe link.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Control the allocated buffer watermark for inbound packets.
+		The packets will be stored in the buffer first and then transmitted
+		either when the watermark reached or when timed out.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Control the allocated buffer watermark of outbound packets.
+		The packets will be stored in the buffer first and then transmitted
+		either when the watermark reached or when timed out.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.

Documentation/ABI/testing/sysfs-driver-habanalabs

@@ -16,7 +16,7 @@ Description:    Version of the application running on the device's CPU
 
 What:           /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
 Date:           Jun 2019
-KernelVersion:  not yet upstreamed
+KernelVersion:  5.7
 Contact:        ogabbay@kernel.org
 Description:    Allows the user to set the maximum clock frequency, in MHz.
                 The device clock might be set to lower value than the maximum.
@@ -26,7 +26,7 @@ Description:    Allows the user to set the maximum clock frequency, in MHz.
 
 What:           /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
 Date:           Jun 2019
-KernelVersion:  not yet upstreamed
+KernelVersion:  5.7
 Contact:        ogabbay@kernel.org
 Description:    Displays the current frequency, in MHz, of the device clock.
                 This property is valid only for the Gaudi ASIC family
@@ -176,6 +176,12 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Version of the device's preboot F/W code
 
+What:           /sys/class/habanalabs/hl<n>/security_enabled
+Date:           Oct 2022
+KernelVersion:  6.1
+Contact:        obitton@habana.ai
+Description:    Displays the device's security status
+
 What:           /sys/class/habanalabs/hl<n>/soft_reset
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -230,6 +236,6 @@ Description:    Version of the u-boot running on the device's CPU
 
 What:           /sys/class/habanalabs/hl<n>/vrm_ver
 Date:           Jan 2022
-KernelVersion:  not yet upstreamed
+KernelVersion:  5.17
 Contact:        ogabbay@kernel.org
 Description:    Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI

Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml

@@ -61,6 +61,9 @@ properties:
     maxItems: 1
     description: Address translation error interrupt
 
+  power-domains:
+    maxItems: 1
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
     additionalProperties: false

Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml

@@ -98,6 +98,9 @@ properties:
       base cti node if compatible string arm,coresight-cti-v8-arch is used,
       or may appear in a trig-conns child node when appropriate.
 
+  power-domains:
+    maxItems: 1
+
   arm,cti-ctm-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:

Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml

@@ -54,6 +54,9 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  power-domains:
+    maxItems: 1
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
 

Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml

@@ -54,6 +54,9 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  power-domains:
+    maxItems: 1
+
   qcom,replicator-loses-context:
     type: boolean
     description:

Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml

@@ -54,6 +54,9 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  power-domains:
+    maxItems: 1
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
     additionalProperties: false

Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml

@@ -73,6 +73,9 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  power-domains:
+    maxItems: 1
+
   arm,coresight-loses-context-with-cpu:
     type: boolean
     description:

Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml

@@ -27,6 +27,9 @@ properties:
   compatible:
     const: arm,coresight-static-funnel
 
+  power-domains:
+    maxItems: 1
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
 

Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml

@@ -27,6 +27,9 @@ properties:
   compatible:
     const: arm,coresight-static-replicator
 
+  power-domains:
+    maxItems: 1
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
     additionalProperties: false

Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml

@@ -61,6 +61,9 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  power-domains:
+    maxItems: 1
+
   out-ports:
     $ref: /schemas/graph.yaml#/properties/ports
     additionalProperties: false

Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml

@@ -55,6 +55,12 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
   arm,buffer-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true

Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml

@@ -54,6 +54,9 @@ properties:
       - const: apb_pclk
       - const: atclk
 
+  power-domains:
+    maxItems: 1
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
     additionalProperties: false

Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml

@@ -33,6 +33,9 @@ properties:
       Handle to the cpu this ETE is bound to.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  power-domains:
+    maxItems: 1
+
   out-ports:
     description: |
       Output connections from the ETE to legacy CoreSight trace bus.

Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };

Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml

@@ -22,13 +22,14 @@ properties:
     description: SPI chip select
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system. A service processor or baseboard management
+  controller can query the OCC for it's power and thermal data to report
+  through hwmon.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,no-poll-on-init:
+    description: This property describes whether or not the OCC should
+      be polled during driver initialization.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "ibm,p10-occ-hwmon";
+        ibm,no-poll-on-init;
+    };

Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml

@@ -27,15 +27,16 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml

@@ -25,14 +25,15 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml

@@ -4,28 +4,30 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL313 3-Axis Digital Accelerometer
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
 
 maintainers:
   - Lucas Stankus <lucas.p.stankus@gmail.com>
 
 description: |
-  Analog Devices ADXL313 3-Axis Digital Accelerometer that supports
-  both I2C & SPI interfaces.
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
     https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
 
 properties:
   compatible:
     enum:
+      - adi,adxl312
       - adi,adxl313
+      - adi,adxl314
 
   reg:
     maxItems: 1
 
   spi-3wire: true
 
-  spi-max-frequency: true
-
   vs-supply:
     description: Regulator that supplies power to the accelerometer
 
@@ -48,7 +50,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

@@ -32,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -42,7 +40,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml

@@ -45,13 +45,14 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml

@@ -35,8 +35,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vddio-supply: true
 
@@ -45,7 +43,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml

@@ -25,14 +25,15 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml

@@ -20,8 +20,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
   vddd-supply: true
   vddio-supply: true
@@ -30,7 +28,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml

@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml

@@ -24,8 +24,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
   vddio-supply: true
@@ -50,7 +48,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml

@@ -39,13 +39,14 @@ properties:
         - "INT1"
         - "INT2"
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml

@@ -29,13 +29,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };

Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml

@@ -29,7 +29,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml

@@ -27,8 +27,6 @@ properties:
   vdd-supply:
     description: phandle to the regulator that provides power to the accelerometer
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -44,7 +42,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml

@@ -52,8 +52,6 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
@@ -106,7 +104,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml

@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   clocks:
     maxItems: 1
     description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml

@@ -28,8 +28,6 @@ properties:
     description: IRQ line for the ADC
     maxItems: 1
 
-  spi-max-frequency: true
-
   adi,voltage-alert-last-chan:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -55,7 +53,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml

@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -65,7 +63,10 @@ patternProperties:
 
     additionalProperties: true
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml

@@ -24,13 +24,15 @@ properties:
 
   vref-supply: true
   vdd-supply: true
-  spi-max-frequency: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml

@@ -66,8 +66,6 @@ properties:
       to the other supplies. Needed to be able to establish channel scaling
       unless there is also an internal reference available (e.g. ad7091r)
 
-  spi-max-frequency: true
-
   adi,conversion-start-gpios:
     description: A GPIO used to trigger the start of a conversion
     maxItems: 1
@@ -76,9 +74,9 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
   # Devices where reference is vcc
   - if:
       properties:
@@ -158,6 +156,8 @@ allOf:
       properties:
         adi,conversion-start-gpios: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -32,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   avcc-supply: true
 
   interrupts:
@@ -105,7 +103,10 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml

@@ -50,8 +50,6 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpol: true
 
   spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
       - reg
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml

@@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Patrick Vasseur <patrick.vasseur@c-s.fr>
 
 description: |
   Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
@@ -37,19 +36,24 @@ properties:
     description: |
       The regulator supply for ADC reference voltage.
 
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
   '#address-cells':
     const: 1
 
   '#size-cells':
     const: 0
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml

@@ -49,8 +49,6 @@ properties:
     default: 4096000
 
 
-  spi-max-frequency: true
-
   '#io-channel-cells':
     const: 1
 
@@ -64,7 +62,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml

@@ -24,8 +24,6 @@ properties:
       GPIO used for controlling the reset pin
     maxItems: 1
 
-  spi-max-frequency: true
-
   "#io-channel-cells":
     const: 1
 
@@ -33,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml

@@ -22,15 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency:
-    description: maximal spi bus frequency supported
-
 required:
   - compatible
   - vref-supply
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml

@@ -13,10 +13,14 @@ description: |
   16bit ADC supporting up to 16 single ended or 8 differential inputs.
   I2C interface.
 
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
 properties:
   compatible:
-    const:
-      lltc,ltc2497
+    enum:
+      - lltc,ltc2497
+      - lltc,ltc2499
 
   reg: true
   vref-supply: true

Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml

@@ -45,7 +45,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml

@@ -26,13 +26,16 @@ properties:
     minimum: 100000
     maximum: 4800000
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml

@@ -28,23 +28,25 @@ properties:
   vref-supply:
     description: External reference, needed to establish input scaling
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: maxim,max1118
-then:
-  required:
-    - vref-supply
-else:
-  properties:
-    vref-supply: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...

Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml

@@ -39,15 +39,16 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml

@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -51,7 +50,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

@@ -36,6 +36,13 @@ properties:
     description: IRQ line of the ADC
     maxItems: 1
 
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -51,7 +58,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml

@@ -58,6 +58,7 @@ required:
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: |
       Represents the external channels which are connected to the ADC.
       For compatible property "qcom,spmi-vadc" following channels, also known as

Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+  interface, and the device provides full information for system by reading
+  out the loading current and power.
+
+  The device monitors both of the drops across sense resistor and the BUS
+  voltage, converts into the current in amperes, and power in watts through
+  internal analog-to-digital converter ADC. The programmable calibration,
+  adjustable conversion time, and averaging function are also built in for
+  more design flexibility.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+  compatible:
+    const: richtek,rtq6056
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt IN+/IN- sensing node resistor
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@40 {
+        compatible = "richtek,rtq6056";
+        reg = <0x40>;
+        #io-channel-cells = <1>;
+      };
+    };

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -72,6 +72,7 @@ additionalProperties: false
 patternProperties:
   "^filter@[0-9]+$":
     type: object
+    unevaluatedProperties: false
     description: child node
 
     properties:
@@ -225,6 +226,7 @@ patternProperties:
           patternProperties:
             "^dfsdm-dai+$":
               type: object
+              additionalProperties: false
               description: child node
 
               properties:

Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml

@@ -13,8 +13,7 @@ description:
   This ADC forms part of an ST microelectronics STMPE multifunction device .
   The ADC is shared with the STMPE touchscreen. As a result some ADC related
   settings are specified in the parent node.
-  The node name myst be stmpe_adc and should be a child node of the stmpe node
-  to which it belongs.
+  The node should be a child node of the stmpe node to which it belongs.
 
 properties:
   compatible:

Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml

@@ -24,8 +24,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml

@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml

@@ -19,7 +19,6 @@ properties:
 
   reg: true
   vref-supply: true
-  spi-max-frequency: true
   "#io-channel-cells":
     const: 1
 
@@ -28,7 +27,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml

@@ -31,8 +31,6 @@ properties:
     maxItems: 1
     description: Conversion clock input.
 
-  spi-max-frequency: true
-
   vref-p-supply:
     description: The regulator supply for positive analog voltage reference
 
@@ -62,7 +60,10 @@ required:
   - clocks
   - vref-p-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml

@@ -27,8 +27,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -39,7 +37,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml

@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
 
   "#io-channel-cells":
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml

@@ -43,6 +43,7 @@ additionalProperties: false
 patternProperties:
   "^channel@[0-7]+$":
     type: object
+    additionalProperties: false
     description:
       Child nodes needed for each channel that the platform uses.
 

Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml

@@ -18,8 +18,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   reset-gpios:
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   The ADS131E0x are a family of multichannel, simultaneous sampling,
@@ -28,8 +28,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   clocks:
@@ -120,7 +118,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml

@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: Supply the 2.5V or 5V reference voltage
 
@@ -32,7 +30,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml

@@ -25,13 +25,14 @@ properties:
     description: Optional external reference.  If not supplied, assume
       REFSEL input tied low to enable the internal reference.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml

@@ -11,9 +11,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - ti,am3359-adc
-      - ti,am4372-adc
+    oneOf:
+      - enum:
+          - ti,am3359-adc
+          - ti,am4372-adc
+      - items:
+          - enum:
+              - ti,am654-adc
+          - const: ti,am3359-adc
 
   '#io-channel-cells':
     const: 1

Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml

@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -33,7 +31,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml

@@ -23,7 +23,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
+  vref-supply:
+    description: Optional supply of the reference voltage
 
   "#io-channel-cells":
     const: 1
@@ -59,7 +60,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml

@@ -134,6 +134,7 @@ properties:
 
   ams-pl@400:
     type: object
+    additionalProperties: false
     description:
       PL-SYSMON is capable of monitoring off chip voltage and temperature.
       PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring

Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml

@@ -63,6 +63,7 @@ additionalProperties: false
 patternProperties:
   "^channel@[0-3]$":
     type: object
+    additionalProperties: false
     description: Represents the external channels which are connected to the device.
 
     properties:

Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml

@@ -27,14 +27,15 @@ properties:
       Enable internal buffer to drive the reference pin.
     type: boolean
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - avdd-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml

@@ -78,6 +78,7 @@ patternProperties:
 
       custom-output-range-config:
         type: object
+        additionalProperties: false
         description: Configuration of custom range when
           adi,output-range-microvolt is not present.
           The formulas for calculation the output voltages are

Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml

@@ -95,15 +95,12 @@ properties:
   vrefD-supply: true
   vref-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - # Shared external vref, no internal reference
     if:
       properties:
@@ -232,6 +229,8 @@ allOf:
         - vrefA-supply
         - vrefB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml

@@ -28,10 +28,6 @@ properties:
   vref1-supply: true
   vref2-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -39,6 +35,7 @@ required:
   - vref1-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -63,6 +60,8 @@ allOf:
       required:
         - vref2-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml

@@ -39,14 +39,15 @@ properties:
     description:
       If not supplied devices will use internal regulators.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml

@@ -26,13 +26,14 @@ properties:
     maxItems: 1
     description: Fault signal.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml

@@ -27,19 +27,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   VREF-supply: true
   VREFA-supply: true
   VREFB-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -72,6 +69,8 @@ allOf:
         - VREFA-supply
         - VREFB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml

@@ -22,17 +22,18 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not present, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml

@@ -53,14 +53,15 @@ properties:
   vcc-supply:
     description: If not supplied the internal reference is used.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml

@@ -25,8 +25,6 @@ properties:
     description: Either this or spi-cpol but not both.
   spi-cpol: true
 
-  spi-max-frequency: true
-
   adi,ext-dc-dc-compenstation-resistor:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -67,8 +65,6 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -123,6 +119,11 @@ oneOf:
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml

@@ -16,7 +16,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   adi,dc-dc-mode:
@@ -99,6 +98,7 @@ required:
   - adi,dc-dc-mode
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         adi,dc-dc-mode:
@@ -115,7 +115,7 @@ allOf:
       required:
         - adi,range-microvolt
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml

@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not supplied, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -45,6 +42,8 @@ allOf:
       required:
         - vref-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml

@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefAB-supply: true
   vrefCD-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -46,6 +43,8 @@ allOf:
         - vrefAB-supply
         - vrefCD-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml

@@ -49,8 +49,6 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -62,6 +60,7 @@ properties:
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -85,6 +84,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -101,6 +101,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -116,6 +117,7 @@ properties:
 patternProperties:
   "^channel@([3-5])$":
     type: object
+    additionalProperties: false
     description: Represents the external channels which are connected to the DAC.
     properties:
       reg:
@@ -138,7 +140,10 @@ required:
   - channel@4
   - channel@5
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml

@@ -23,19 +23,20 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vss-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vss-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml

@@ -19,19 +19,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefh-supply: true
   vrefl-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vrefh-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -44,6 +41,8 @@ allOf:
       properties:
         vrefl-supply: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml

@@ -48,6 +48,7 @@ properties:
 patternProperties:
   "^channel@([0-9]|1[0-5])$":
     type: object
+    additionalProperties: false
 
     properties:
       reg:

Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml

@@ -21,17 +21,18 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml

@@ -33,21 +33,22 @@ properties:
   vref-supply:
     description: Needed to provide output scaling.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
-
 oneOf:
   - required:
       - spi-cpha
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     vref_2v5_reg: regulator-vref {

Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml

@@ -24,14 +24,15 @@ properties:
       Reference voltage must be supplied to establish the scaling of the
       output voltage.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml

@@ -29,13 +29,14 @@ properties:
       DACs are loaded when the pin connected to this GPIO is pulled low.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/frequency/adf4371.yaml

@@ -40,15 +40,16 @@ properties:
       output stage will shut down until the ADF4371/ADF4372 achieves lock as
       measured by the digital lock detect circuitry.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml

@@ -25,14 +25,15 @@ properties:
 
   reset-gpios: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>