Skip to content

L
linux
Commit a1082a4d authored by Matthias Beyer's avatar Matthias Beyer Committed by Greg Kroah-Hartman
Browse files
Options

Staging: bcm: led_control.{c,h}: Fixed macro 

This patch fixes the TURN_{ON,OFF}_LED() macros by adding the adapter as
parameter.
Signed-off-by: default avatarMatthias Beyer <mail@beyermatthias.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ce2705c3
Show whitespace changes
Inline Side-by-side
Showing with 31 additions and 24 deletions
drivers/staging/bcm/led_control.c
View file @ a1082a4d
......@@ -40,7 +40,7 @@ static INT LED_Blink(struct bcm_mini_adapter *Adapter,
}
while (num_of_time) {
if (currdriverstate == Adapter->DriverState)
TURN_ON_LED(GPIO_Num, uiLedIndex);
TURN_ON_LED(Adapter, GPIO_Num, uiLedIndex);
/* Wait for timeout after setting on the LED */
Status = wait_event_interruptible_timeout(
......@@ -55,17 +55,17 @@ static INT LED_Blink(struct bcm_mini_adapter *Adapter,
"Led thread got signal to exit..hence exiting");
Adapter->LEDInfo.led_thread_running =
BCM_LED_THREAD_DISABLED;
TURN_OFF_LED(GPIO_Num, uiLedIndex);
TURN_OFF_LED(Adapter, GPIO_Num, uiLedIndex);
Status = EVENT_SIGNALED;
break;
}
if (Status) {
TURN_OFF_LED(GPIO_Num, uiLedIndex);
TURN_OFF_LED(Adapter, GPIO_Num, uiLedIndex);
Status = EVENT_SIGNALED;
break;
}
TURN_OFF_LED(GPIO_Num, uiLedIndex);
TURN_OFF_LED(Adapter, GPIO_Num, uiLedIndex);
Status = wait_event_interruptible_timeout(
Adapter->LEDInfo.notify_led_event,
currdriverstate != Adapter->DriverState ||
......@@ -223,8 +223,8 @@ static INT LED_Proportional_Blink(struct bcm_mini_adapter *Adapter,
}
/* Turn off both Tx and Rx LEDs before next second */
TURN_OFF_LED(1 << GPIO_Num_tx, uiTxLedIndex);
TURN_OFF_LED(1 << GPIO_Num_rx, uiTxLedIndex);
TURN_OFF_LED(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex);
TURN_OFF_LED(Adapter, 1 << GPIO_Num_rx, uiTxLedIndex);
/*
* Read the Tx & Rx packets transmission after 1 second and
......@@ -606,7 +606,8 @@ static VOID LedGpioInit(struct bcm_mini_adapter *Adapter)
if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
DISABLE_GPIO_NUM)
uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);
TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num,
TURN_OFF_LED(Adapter,
1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num,
uiIndex);
}
if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue,
......@@ -680,7 +681,7 @@ static void handle_adapter_driver_state(struct bcm_mini_adapter *ad,
currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
TURN_ON_LED(ad, 1 << GPIO_num, uiLedIndex);
break;
case FW_DOWNLOAD:
......@@ -705,7 +706,7 @@ static void handle_adapter_driver_state(struct bcm_mini_adapter *ad,
BcmGetGPIOPinInfo(ad, &GPIO_num, &dummyGPIONum,
&uiLedIndex, &dummyIndex, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
TURN_ON_LED(ad, 1 << GPIO_num, uiLedIndex);
break;
case SHUTDOWN_EXIT:
......@@ -718,7 +719,7 @@ static void handle_adapter_driver_state(struct bcm_mini_adapter *ad,
BcmGetGPIOPinInfo(ad, &GPIO_num, &dummyGPIONum,
&uiLedIndex, &dummyGPIONum, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
TURN_ON_LED(ad, 1 << GPIO_num, uiLedIndex);
break;
case NORMAL_OPERATION:
{
......@@ -765,7 +766,9 @@ static void handle_adapter_driver_state(struct bcm_mini_adapter *ad,
uiResetValue = 0;
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (ad->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << ad->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
TURN_OFF_LED(ad,
(1 << ad->LEDInfo.LEDState[uiIndex].GPIO_Num),
uiIndex);
}
}
......@@ -787,7 +790,9 @@ static void handle_adapter_driver_state(struct bcm_mini_adapter *ad,
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (ad->LEDInfo.LEDState[uiIndex].GPIO_Num !=
DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << ad->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
TURN_OFF_LED(ad,
(1 << ad->LEDInfo.LEDState[uiIndex].GPIO_Num),
uiIndex);
}
/* ad->DriverState = DRIVER_INIT; */
break;
......@@ -802,7 +807,9 @@ static void handle_adapter_driver_state(struct bcm_mini_adapter *ad,
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (ad->LEDInfo.LEDState[uiIndex].GPIO_Num !=
DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << ad->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
TURN_OFF_LED(ad,
(1 << ad->LEDInfo.LEDState[uiIndex].GPIO_Num),
uiIndex);
}
break;
case LED_THREAD_ACTIVE:
......@@ -868,12 +875,12 @@ static VOID LEDControlThread(struct bcm_mini_adapter *Adapter)
"Led thread got signal to exit..hence exiting");
Adapter->LEDInfo.led_thread_running =
BCM_LED_THREAD_DISABLED;
TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
TURN_OFF_LED(Adapter, 1 << GPIO_num, uiLedIndex);
return; /* STATUS_FAILURE; */
}
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
TURN_OFF_LED(Adapter, 1 << GPIO_num, uiLedIndex);
if (Adapter->LEDInfo.bLedInitDone == false) {
LedGpioInit(Adapter);
......
drivers/staging/bcm/led_control.h
View file @ a1082a4d
......@@ -17,18 +17,18 @@
#define EVENT_SIGNALED 1
#define MAX_FILE_NAME_BUFFER_SIZE 100
#define TURN_ON_LED(GPIO, index) do { \
#define TURN_ON_LED(ad, GPIO, index) do { \
unsigned int gpio_val = GPIO; \
(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
(ad->LEDInfo.LEDState[index].BitPolarity == 1) ? \
wrmaltWithLock(ad, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
wrmaltWithLock(ad, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
} while (0)
#define TURN_OFF_LED(GPIO, index) do { \
#define TURN_OFF_LED(ad, GPIO, index) do { \
unsigned int gpio_val = GPIO; \
(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
(ad->LEDInfo.LEDState[index].BitPolarity == 1) ? \
wrmaltWithLock(ad, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
wrmaltWithLock(ad, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
} while (0)
enum bcm_led_colors {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7