Merge bk://bk.arm.linux.org.uk/linux-2.5-rmk

into home.transmeta.com:/home/torvalds/v2.5/linux

arch/arm/Makefile

@@ -31,13 +31,15 @@ apcs-$(CONFIG_CPU_32)		:=-mapcs-32
 apcs-$(CONFIG_CPU_26)		:=-mapcs-26 -mcpu=arm3
 
 # This selects which instruction set is used.
-# Note that GCC is lame - it doesn't numerically define an
-# architecture version macro, but instead defines a whole
-# series of macros.
-arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
+# Note that GCC does not numerically define an architecture version
+# macro, but instead defines a whole series of macros which makes
+# testing for a specific architecture or later rather impossible.
+#
+# Note - GCC does accept -march=armv5te, but someone messed up the assembler or the
+# gcc specs file - this needs fixing properly - ie in gcc and/or binutils.
+arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 -march=armv5t
 arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 -march=armv5te
-arch-$(CONFIG_CPU_XSCALE)	:=-D__LINUX_ARM_ARCH__=5 -march=armv4 -Wa,-mxscale #-march=armv5te
+arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
 
 # This selects how we optimise for the processor.
 tune-$(CONFIG_CPU_ARM610)	:=-mtune=arm610
@@ -48,13 +50,13 @@ tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	:=-mtune=strongarm #-mtune=xscale
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=strongarm -Wa,-mxscale #-mtune=xscale
 
 # Force -mno-fpu to be passed to the assembler.  Some versions of gcc don't
 # do this with -msoft-float
 CFLAGS_BOOT	:=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm
 CFLAGS		+=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm
-AFLAGS		+=$(apcs-y) $(arch-y) -mno-fpu -msoft-float -Wa,-mno-fpu
+AFLAGS		+=$(apcs-y) $(arch-y) $(tune-y) -mno-fpu -msoft-float -Wa,-mno-fpu
 
 #Default value
 DATAADDR	:= .
@@ -208,6 +210,7 @@ zi:;	$(Q)$(MAKE) $(build)=$(boot) zinstall
 	)
 
 arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
+				   include/asm-arm/.arch include/asm-arm/.proc \
 				   include/config/MARKER
 
 include/asm-$(ARCH)/constants.h: arch/$(ARCH)/kernel/asm-offsets.s

arch/arm/boot/compressed/head-sa1100.S

@@ -50,6 +50,10 @@ __SA1100_start:
 10:
 #endif
 
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		ands	r0, r0, #0x0d
+		beq	99f
+
 		@ Data cache might be active.
 		@ Be sure to flush kernel binary out of the cache,
 		@ whatever state it is, before it is turned off.
@@ -68,11 +72,4 @@ __SA1100_start:
 		bic	r0, r0, #0x0d		@ clear WB, DC, MMU
 		bic	r0, r0, #0x1000		@ clear Icache
 		mcr	p15, 0, r0, c1, c0, 0
-
-/*
- * Pause for a short time so that we give enough time
- * for the host to start a terminal up.
- */
-		mov	r0, #0x00200000
-1:		subs	r0, r0, #1
-		bne	1b
+99:

arch/arm/kernel/process.c

@@ -418,7 +418,7 @@ unsigned long get_wchan(struct task_struct *p)
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
-	stack_page = 4096 + (unsigned long)p;
+	stack_page = 4096 + (unsigned long)p->thread_info;
 	fp = thread_saved_fp(p);
 	do {
 		if (fp < stack_page || fp > 4092+stack_page)

arch/arm/kernel/setup.c

@@ -74,6 +74,9 @@ struct cpu_tlb_fns cpu_tlb;
 #ifdef MULTI_USER
 struct cpu_user_fns cpu_user;
 #endif
+#ifdef MULTI_CACHE
+struct cpu_cache_fns cpu_cache;
+#endif
 
 unsigned char aux_device_present;
 char elf_platform[ELF_PLATFORM_SIZE];
@@ -282,6 +285,9 @@ static void __init setup_processor(void)
 #ifdef MULTI_USER
 	cpu_user = *list->user;
 #endif
+#ifdef MULTI_CACHE
+	cpu_cache = *list->cache;
+#endif
 
 	printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
 	       cpu_name, processor_id, (int)processor_id & 15,
@@ -323,24 +329,29 @@ static struct machine_desc * __init setup_machine(unsigned int nr)
 	return list;
 }
 
+static void __init early_initrd(char **p)
+{
+	unsigned long start, size;
+
+	start = memparse(*p, p);
+	if (**p == ',') {
+		size = memparse((*p) + 1, p);
+
+		phys_initrd_start = start;
+		phys_initrd_size = size;
+	}
+}
+__early_param("initrd=", early_initrd);
+
 /*
- * Initial parsing of the command line.  We need to pick out the
- * memory size.  We look for mem=size@start, where start and size
- * are "size[KkMm]"
+ * Pick out the memory size.  We look for mem=size@start,
+ * where start and size are "size[KkMm]"
  */
-static void __init
-parse_cmdline(struct meminfo *mi, char **cmdline_p, char *from)
+static void __init early_mem(char **p)
 {
-	char c = ' ', *to = command_line;
-	int usermem = 0, len = 0;
-
-	for (;;) {
-		if (c == ' ' && !memcmp(from, "mem=", 4)) {
+	static int usermem __initdata = 0;
 	unsigned long size, start;
 
-			if (to != command_line)
-				to -= 1;
-
 	/*
 	 * If the user specifies memory size, we
 	 * blow away any automatically generated
@@ -348,33 +359,47 @@ parse_cmdline(struct meminfo *mi, char **cmdline_p, char *from)
 	 */
 	if (usermem == 0) {
 		usermem = 1;
-				mi->nr_banks = 0;
+		meminfo.nr_banks = 0;
 	}
 
 	start = PHYS_OFFSET;
-			size  = memparse(from + 4, &from);
-			if (*from == '@')
-				start = memparse(from + 1, &from);
-
-			mi->bank[mi->nr_banks].start = start;
-			mi->bank[mi->nr_banks].size  = size;
-			mi->bank[mi->nr_banks].node  = PHYS_TO_NID(start);
-			mi->nr_banks += 1;
-		} else if (c == ' ' && !memcmp(from, "initrd=", 7)) {
-			unsigned long start, size;
+	size  = memparse(*p, p);
+	if (**p == '@')
+		start = memparse(*p + 1, p);
 
-			/*
-			 * Remove space character
+	meminfo.bank[meminfo.nr_banks].start = start;
+	meminfo.bank[meminfo.nr_banks].size  = size;
+	meminfo.bank[meminfo.nr_banks].node  = PHYS_TO_NID(start);
+	meminfo.nr_banks += 1;
+}
+__early_param("mem=", early_mem);
+
+/*
+ * Initial parsing of the command line.
  */
+static void __init parse_cmdline(char **cmdline_p, char *from)
+{
+	char c = ' ', *to = command_line;
+	int len = 0;
+
+	for (;;) {
+		if (c == ' ') {
+			extern struct early_params __early_begin, __early_end;
+			struct early_params *p;
+
+			for (p = &__early_begin; p < &__early_end; p++) {
+				int len = strlen(p->arg);
+
+				if (memcmp(from, p->arg, len) == 0) {
 					if (to != command_line)
 						to -= 1;
+					from += len;
+					p->fn(&from);
 
-			start = memparse(from + 7, &from);
-			if (*from == ',') {
-				size = memparse(from + 1, &from);
-
-				phys_initrd_start = start;
-				phys_initrd_size = size;
+					while (*from != ' ' && *from != '\0')
+						from++;
+					break;
+				}
 			}
 		}
 		c = *from++;
@@ -536,6 +561,8 @@ __tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
 
 static int __init parse_tag_initrd(const struct tag *tag)
 {
+	printk(KERN_WARNING "ATAG_INITRD is deprecated; "
+		"please update your bootloader.\n");
 	phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
 	phys_initrd_size = tag->u.initrd.size;
 	return 0;
@@ -668,7 +695,7 @@ void __init setup_arch(char **cmdline_p)
 
 	memcpy(saved_command_line, from, COMMAND_LINE_SIZE);
 	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
-	parse_cmdline(&meminfo, cmdline_p, from);
+	parse_cmdline(cmdline_p, from);
 	bootmem_init(&meminfo);
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);

arch/arm/mach-integrator/cpu.c

@@ -12,6 +12,7 @@
  * CPU support functions
  */
 #include <linux/config.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
@@ -173,9 +174,9 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static int integrator_cpufreq_init(struct cpufreq *policy)
+static int integrator_cpufreq_init(struct cpufreq_policy *policy)
 {
-	unsigned long cus_allowed;
+	unsigned long cpus_allowed;
 	unsigned int cpu = policy->cpu;
 	u_int cm_osc, cm_stat, mem_freq_khz;
 	struct vco vco;

arch/arm/mach-integrator/irq.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
+#include <linux/list.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-sa1100/assabet.c

@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/serial_core.h>
 #include <linux/delay.h>
@@ -25,6 +26,7 @@
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mm/Makefile

@@ -20,16 +20,16 @@ obj-$(CONFIG_DISCONTIGMEM) += discontig.o
 p-$(CONFIG_CPU_26)	+= proc-arm2_3.o
 
 # ARMv3
-p-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o  tlb-v3.o    copypage-v3.o
-p-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o  tlb-v3.o    copypage-v3.o
+p-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o  tlb-v3.o    cache-v3.o    copypage-v3.o
+p-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o  tlb-v3.o    cache-v3.o    copypage-v3.o
 
 # ARMv4
-p-$(CONFIG_CPU_ARM720T)	+= proc-arm720.o  tlb-v4.o    copypage-v4wt.o abort-lv4t.o
-p-$(CONFIG_CPU_ARM920T)	+= proc-arm920.o  tlb-v4wbi.o copypage-v4wb.o abort-ev4t.o
-p-$(CONFIG_CPU_ARM922T)	+= proc-arm922.o  tlb-v4wbi.o copypage-v4wb.o abort-ev4t.o
-p-$(CONFIG_CPU_ARM1020)	+= proc-arm1020.o tlb-v4wbi.o copypage-v4wb.o abort-ev4t.o
-p-$(CONFIG_CPU_SA110)	+= proc-sa110.o   tlb-v4wb.o  copypage-v4wb.o abort-ev4.o   minicache.o
-p-$(CONFIG_CPU_SA1100)	+= proc-sa110.o   tlb-v4wb.o  copypage-v4mc.o abort-ev4.o   minicache.o
+p-$(CONFIG_CPU_ARM720T)	+= proc-arm720.o  tlb-v4.o    cache-v4.o    copypage-v4wt.o abort-lv4t.o
+p-$(CONFIG_CPU_ARM920T)	+= proc-arm920.o  tlb-v4wbi.o cache-v4wt.o  copypage-v4wb.o abort-ev4t.o
+p-$(CONFIG_CPU_ARM922T)	+= proc-arm922.o  tlb-v4wbi.o cache-v4wt.o  copypage-v4wb.o abort-ev4t.o
+p-$(CONFIG_CPU_ARM1020)	+= proc-arm1020.o tlb-v4wbi.o cache-v4wt.o  copypage-v4wb.o abort-ev4t.o
+p-$(CONFIG_CPU_SA110)	+= proc-sa110.o   tlb-v4wb.o  cache-v4wb.o  copypage-v4wb.o abort-ev4.o
+p-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o  tlb-v4wb.o  cache-v4wb.o  copypage-v4mc.o abort-ev4.o   minicache.o
 
 # ARMv5
 p-$(CONFIG_CPU_ARM926T)	+= proc-arm926.o  tlb-v4wbi.o copypage-v4wb.o abort-ev5tej.o

arch/arm/mm/cache-v3.S

+/*
+ *  linux/arch/arm/mm/cache-v3.S
+ *
+ *  Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Invalidate all cache entries in a particular address
+ *	space.
+ *
+ *	- mm	- mm_struct describing address space
+ */
+ENTRY(v3_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(v3_flush_kern_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_user_cache_range(start, end, vm_flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end	- end address (exclusive, may not be aligned)
+ *	- vma	- vma_area_struct describing address space
+ */
+ENTRY(v3_flush_user_cache_range)
+	mov	ip, #0
+	mcreq	p15, 0, ip, c7, c0, 0		@ flush ID cache
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v3_coherent_kern_range)
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(v3_flush_kern_dcache_page)
+	/* FALLTHROUGH */
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v3_dma_inv_range)
+	/* FALLTHROUGH */
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v3_dma_flush_range)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c0, 0		@ flush ID cache
+	/* FALLTHROUGH */
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean (write back) the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v3_dma_clean_range)
+	mov	pc, lr
+
+ENTRY(v3_cache_fns)
+	.long	v3_flush_kern_cache_all
+	.long	v3_flush_user_cache_all
+	.long	v3_flush_user_cache_range
+	.long	v3_coherent_kern_range
+	.long	v3_flush_kern_dcache_page
+	.long	v3_dma_inv_range
+	.long	v3_dma_clean_range
+	.long	v3_dma_flush_range

arch/arm/mm/cache-v4.S

+/*
+ *  linux/arch/arm/mm/cache-v4.S
+ *
+ *  Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Invalidate all cache entries in a particular address
+ *	space.
+ *
+ *	- mm	- mm_struct describing address space
+ */
+ENTRY(v4_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(v4_flush_kern_cache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, vma)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end	- end address (exclusive, may not be aligned)
+ *	- vma	- vma_area_struct describing address space
+ */
+ENTRY(v4_flush_user_cache_range)
+	mov	ip, #0
+	mcreq	p15, 0, ip, c7, c7, 0		@ flush ID cache
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4_coherent_kern_range)
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(v4_flush_kern_dcache_page)
+	/* FALLTHROUGH */
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4_dma_inv_range)
+	/* FALLTHROUGH */
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4_dma_flush_range)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
+	/* FALLTHROUGH */
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean (write back) the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4_dma_clean_range)
+	mov	pc, lr
+
+ENTRY(v4_cache_fns)
+	.long	v4_flush_kern_cache_all
+	.long	v4_flush_user_cache_all
+	.long	v4_flush_user_cache_range
+	.long	v4_coherent_kern_range
+	.long	v4_flush_kern_dcache_page
+	.long	v4_dma_inv_range
+	.long	v4_dma_clean_range
+	.long	v4_dma_flush_range

arch/arm/mm/cache-v4wb.S

+/*
+ *  linux/arch/arm/mm/cache-v4wb.S
+ *
+ *  Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * The total size of the data cache.
+ */
+#if defined(CONFIG_CPU_SA110)
+# define CACHE_DSIZE	16384
+#elif defined(CONFIG_CPU_SA1100)
+# define CACHE_DSIZE	8192
+#else
+# error Unknown cache size
+#endif
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ *
+ *  Size  Clean (ticks) Dirty (ticks)
+ *   4096   21  20  21    53  55  54
+ *   8192   40  41  40   106 100 102
+ *  16384   77  77  76   140 140 138
+ *  32768  150 149 150   214 216 212 <---
+ *  65536  296 297 296   351 358 361
+ * 131072  591 591 591   656 657 651
+ *  Whole  132 136 132   221 217 207 <---
+ */
+#define CACHE_DLIMIT	(CACHE_DSIZE * 4)
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Clean and invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(v4wb_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(v4wb_flush_kern_cache_all)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+__flush_whole_cache:
+	mov	r0, #FLUSH_BASE
+	add	r1, r0, #CACHE_DSIZE
+1:	ldr	r2, [r0], #32
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, ip, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, vm_flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (inclusive, page aligned)
+ *	- end	- end address (exclusive, page aligned)
+ *	- vma	- vma_area_struct describing address space
+ */
+ENTRY(v4wb_flush_user_cache_range)
+	sub	r3, r1, r0			@ calculate total size
+	tst	r2, #VM_EXEC			@ executable region?
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+
+	cmp	r3, #CACHE_DLIMIT		@ total size >= limit?
+	bhs	__flush_whole_cache		@ flush whole D cache
+
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(v4wb_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+	/* fall through */
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_coherent_kern_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_dma_inv_range)
+	tst	r0, #CACHE_DLINESIZE - 1
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean (write back) the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_dma_clean_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ *
+ *	This is actually the same as v4wb_coherent_kern_range()
+ */
+	.globl	v4wb_dma_flush_range
+	.set	v4wb_dma_flush_range, v4wb_coherent_kern_range
+
+ENTRY(v4wb_cache_fns)
+	.long	v4wb_flush_kern_cache_all
+	.long	v4wb_flush_user_cache_all
+	.long	v4wb_flush_user_cache_range
+	.long	v4wb_coherent_kern_range
+	.long	v4wb_flush_kern_dcache_page
+	.long	v4wb_dma_inv_range
+	.long	v4wb_dma_clean_range
+	.long	v4wb_dma_flush_range

arch/arm/mm/cache-v4wt.S

+/*
+ *  linux/arch/arm/mm/cache-v4wt.S
+ *
+ *  Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  ARMv4 write through cache operations support.
+ *
+ *  We assume that the write buffer is not enabled.
+ */
+#include <linux/linkage.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * The number of data cache segments.
+ */
+#define CACHE_DSEGMENTS	8
+
+/*
+ * The number of lines in a cache segment.
+ */
+#define CACHE_DENTRIES	64
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ *
+ * *** This needs benchmarking
+ */
+#define CACHE_DLIMIT	16384
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(v4wt_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(v4wt_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, vm_flags)
+ *
+ *	Clean and invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (inclusive, page aligned)
+ *	- end	- end address (exclusive, page aligned)
+ *	- vma	- vma_area_struct describing address space
+ */
+ENTRY(v4wt_flush_user_cache_range)
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT
+	bhs	__flush_whole_cache
+
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wt_coherent_kern_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(v4wt_flush_kern_dcache_page)
+	mov	r2, #0
+	mcr	p15, 0, r2, c7, c5, 0		@ invalidate I cache
+	add	r1, r0, #PAGE_SZ
+	/* fallthrough */
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wt_dma_inv_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	/* FALLTHROUGH */
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wt_dma_clean_range)
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+	.globl	v4wt_dma_flush_range
+	.equ	v4wt_dma_flush_range, v4wt_dma_inv_range
+
+ENTRY(v4wt_cache_fns)
+	.long	v4wt_flush_kern_cache_all
+	.long	v4wt_flush_user_cache_all
+	.long	v4wt_flush_user_cache_range
+	.long	v4wt_coherent_kern_range
+	.long	v4wt_flush_kern_dcache_page
+	.long	v4wt_dma_inv_range
+	.long	v4wt_dma_clean_range
+	.long	v4wt_dma_flush_range
+

arch/arm/mm/consistent.c

@@ -161,11 +161,11 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle,
 
 	/*
 	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region.
+	 * kernel direct-mapped region for device DMA.
 	 */
 	{
 		unsigned long kaddr = (unsigned long)page_address(page);
-		invalidate_dcache_range(kaddr, kaddr + size);
+		dmac_inv_range(kaddr, kaddr + size);
 	}
 
 	/*
@@ -330,7 +330,7 @@ static int __init consistent_init(void)
 core_initcall(consistent_init);
 
 /*
- * make an area consistent.
+ * make an area consistent for devices.
  */
 void consistent_sync(void *vaddr, size_t size, int direction)
 {
@@ -339,13 +339,13 @@ void consistent_sync(void *vaddr, size_t size, int direction)
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		invalidate_dcache_range(start, end);
+		dmac_inv_range(start, end);
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		clean_dcache_range(start, end);
+		dmac_clean_range(start, end);
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		flush_dcache_range(start, end);
+		dmac_flush_range(start, end);
 		break;
 	default:
 		BUG();

arch/arm/mm/fault-armv.c

@@ -184,9 +184,8 @@ void __flush_dcache_page(struct page *page)
 {
 	struct mm_struct *mm = current->active_mm;
 	struct list_head *l;
-	unsigned long kaddr = (unsigned long)page_address(page);
 
-	cpu_cache_clean_invalidate_range(kaddr, kaddr + PAGE_SIZE, 0);
+	__cpuc_flush_dcache_page(page_address(page));
 
 	if (!page->mapping)
 		return;
@@ -291,10 +290,9 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 	page = pfn_to_page(pfn);
 	if (page->mapping) {
 		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-		unsigned long kaddr = (unsigned long)page_address(page);
 
 		if (dirty)
-			cpu_cache_clean_invalidate_range(kaddr, kaddr + PAGE_SIZE, 0);
+			__cpuc_flush_dcache_page(page_address(page));
 
 		make_coherent(vma, addr, page, dirty);
 	}

arch/arm/mm/fault-common.c

@@ -12,19 +12,15 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/types.h>
 #include <linux/ptrace.h>
-#include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <linux/proc_fs.h>
 #include <linux/init.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 #include <asm/uaccess.h>
 
 #include "fault.h"

arch/arm/mm/mm-armv.c

@@ -24,30 +24,82 @@
 
 #include <asm/mach/map.h>
 
+static unsigned int cachepolicy __initdata = PMD_SECT_WB;
+static unsigned int ecc_mask __initdata = 0;
+
+struct cachepolicy {
+	char		*policy;
+	unsigned int	cr_mask;
+	unsigned int	pmd;
+};
+
+static struct cachepolicy cache_policies[] __initdata = {
+	{ "uncached",		CR1_W|CR1_C,	PMD_SECT_UNCACHED },
+	{ "buffered",		CR1_C,		PMD_SECT_BUFFERED },
+	{ "writethrough",	0,		PMD_SECT_WT       },
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	{ "writeback",		0,		PMD_SECT_WB       },
+	{ "writealloc",		0,		PMD_SECT_WBWA     }
+#endif
+};
+
 /*
  * These are useful for identifing cache coherency
  * problems by allowing the cache or the cache and
  * writebuffer to be turned off.  (Note: the write
  * buffer should not be on and the cache off).
  */
-static int __init nocache_setup(char *__unused)
+static void __init early_cachepolicy(char **p)
 {
-	cr_alignment &= ~CR1_C;
-	cr_no_alignment &= ~CR1_C;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
+		int len = strlen(cache_policies[i].policy);
+
+		if (memcmp(*p, cache_policies[i].policy, len) == 0) {
+			cachepolicy = cache_policies[i].pmd;
+			cr_alignment &= ~cache_policies[i].cr_mask;
+			cr_no_alignment &= ~cache_policies[i].cr_mask;
+			*p += len;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(cache_policies))
+		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
 	flush_cache_all();
 	set_cr(cr_alignment);
-	return 1;
 }
 
-static int __init nowrite_setup(char *__unused)
+static void __init early_nocache(char **__unused)
 {
-	cr_alignment &= ~(CR1_W|CR1_C);
-	cr_no_alignment &= ~(CR1_W|CR1_C);
-	flush_cache_all();
-	set_cr(cr_alignment);
-	return 1;
+	char *p = "buffered";
+	printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
+	early_cachepolicy(&p);
+}
+
+static void __init early_nowrite(char **__unused)
+{
+	char *p = "uncached";
+	printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
+	early_cachepolicy(&p);
+}
+
+static void __init early_ecc(char **p)
+{
+	if (memcmp(*p, "on", 2) == 0) {
+		ecc_mask = PMD_PROTECTION;
+		*p += 2;
+	} else if (memcmp(*p, "off", 3) == 0) {
+		ecc_mask = 0;
+		*p += 3;
+	}
 }
 
+__early_param("nocache", early_nocache);
+__early_param("nowb", early_nowrite);
+__early_param("cachepolicy=", early_cachepolicy);
+__early_param("ecc=", early_ecc);
+
 static int __init noalign_setup(char *__unused)
 {
 	cr_alignment &= ~CR1_A;
@@ -57,8 +109,6 @@ static int __init noalign_setup(char *__unused)
 }
 
 __setup("noalign", noalign_setup);
-__setup("nocache", nocache_setup);
-__setup("nowb", nowrite_setup);
 
 #define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
 
@@ -197,7 +247,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
 		pmdval = __pa(ptep) | prot_l1;
 		pmdp[0] = __pmd(pmdval);
 		pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
-		cpu_flush_pmd(pmdp);
+		flush_pmd_entry(pmdp);
 	}
 	ptep = pte_offset_kernel(pmdp, virt);
 
@@ -231,32 +281,20 @@ static struct mem_types mem_types[] __initdata = {
 		.domain    = DOMAIN_IO,
 	},
 	[MT_CACHECLEAN] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_CACHEABLE | L_PTE_BUFFERABLE,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_BIT4,
 		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MINICLEAN] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_CACHEABLE,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_BIT4,
 		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_VECTORS] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_CACHEABLE | L_PTE_BUFFERABLE |
 				L_PTE_EXEC,
 		.prot_l1   = PMD_TYPE_TABLE | PMD_BIT4,
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_CACHEABLE | L_PTE_BUFFERABLE |
-				L_PTE_EXEC | L_PTE_WRITE,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_BIT4,
 		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	}
@@ -268,37 +306,50 @@ static struct mem_types mem_types[] __initdata = {
 static void __init build_mem_type_table(void)
 {
 	int cpu_arch = cpu_architecture();
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	int writethrough = 1;
-#else
-	int writethrough = 0;
-#endif
-	int writealloc = 0, ecc = 0;
+	const char *policy;
 
-	if (cpu_arch < CPU_ARCH_ARMv5) {
-		writealloc = 0;
-		ecc = 0;
+	/*
+	 * ARMv5 can use ECC memory.
+	 */
+	if (cpu_arch == CPU_ARCH_ARMv5) {
+		mem_types[MT_VECTORS].prot_l1 |= ecc_mask;
+		mem_types[MT_MEMORY].prot_sect |= ecc_mask;
+	} else {
 		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
+		if (cachepolicy == PMD_SECT_WBWA)
+			cachepolicy = PMD_SECT_WB;
+		ecc_mask = 0;
 	}
 
-	if (writethrough) {
+	mem_types[MT_MEMORY].prot_sect |= cachepolicy;
+
+	switch (cachepolicy) {
+	default:
+	case PMD_SECT_UNCACHED:
+		policy = "uncached";
+		break;
+	case PMD_SECT_BUFFERED:
+		mem_types[MT_VECTORS].prot_pte |= PTE_BUFFERABLE;
+		policy = "buffered";
+		break;
+	case PMD_SECT_WT:
+		mem_types[MT_VECTORS].prot_pte |= PTE_BUFFERABLE|PTE_CACHEABLE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
-		mem_types[MT_VECTORS].prot_sect |= PMD_SECT_WT;
-		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_WT;
-	} else {
+		policy = "write through";
+		break;
+	case PMD_SECT_WB:
+		mem_types[MT_VECTORS].prot_pte |= PTE_BUFFERABLE|PTE_CACHEABLE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
-		mem_types[MT_VECTORS].prot_sect |= PMD_SECT_WB;
-
-		if (writealloc)
-			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_WBWA;
-		else
-			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_WB;
-	}
-
-	if (ecc) {
-		mem_types[MT_VECTORS].prot_sect |= PMD_PROTECTION;
-		mem_types[MT_MEMORY].prot_sect |= PMD_PROTECTION;
+		policy = "write back";
+		break;
+	case PMD_SECT_WBWA:
+		mem_types[MT_VECTORS].prot_pte |= PTE_BUFFERABLE|PTE_CACHEABLE;
+		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
+		policy = "write back, write allocate";
+		break;
 	}
+	printk("Memory policy: ECC %sabled, Data cache %s\n",
+		ecc_mask ? "en" : "dis", policy);
 }
 
 /*
@@ -330,6 +381,14 @@ static void __init create_mapping(struct map_desc *md)
 	off    = md->physical - virt;
 	length = md->length;
 
+	if (mem_types[md->type].prot_l1 == 0 &&
+	    (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
+		printk(KERN_WARNING "MM: map for 0x%08lx at 0x%08lx can not "
+		       "be mapped using pages, ignoring.\n",
+		       md->physical, md->virtual);
+		return;
+	}
+
 	while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) {
 		alloc_init_page(virt, virt + off, prot_l1, prot_pte);
 

arch/arm/mm/proc-arm2_3.S

@@ -162,7 +162,7 @@ memc_phys_table_32:
  * and inaccessible (0x01f00000).
  * Params  : r0 = page table pointer
  */
-clear_tables:	ldr	r1, _arm3_set_pgd - 4
+clear_tables:	ldr	r1, _arm3_switch_mm - 4
 		ldr	r2, [r1]
 		sub	r1, r0, #256 * 4		@ start of MEMC tables
 		add	r2, r1, r2, lsl #2		@ end of tables
@@ -186,14 +186,16 @@ clear_tables:	ldr	r1, _arm3_set_pgd - 4
 		mov	pc, lr
 
 /*
- * Function: *_set_pgd(pgd_t *pgd)
+ * Function: *_switch_mm(pgd_t *pgd)
  * Params  : pgd	New page tables/MEMC mapping
  * Purpose : update MEMC hardware with new mapping
  */
 		.word	page_nr
-_arm3_set_pgd:	mcr	p15, 0, r1, c1, c0, 0		@ flush cache
-_arm2_set_pgd:	stmfd	sp!, {lr}
-		ldr	r1, _arm3_set_pgd - 4
+_arm3_switch_mm:
+		mcr	p15, 0, r1, c1, c0, 0		@ flush cache
+_arm2_switch_mm:
+		stmfd	sp!, {lr}
+		ldr	r1, _arm3_switch_mm - 4
 		ldr	r2, [r1]
 		sub	r0, r0, #256 * 4		@ start of MEMC tables
 		add	r1, r0, r2, lsl #2		@ end of tables
@@ -273,9 +275,6 @@ _arm2_xchg_4:	mov	r2, pc
 _arm3_xchg_4:	swp	r0, r0, [r1]
 		movs	pc, lr
 
-_arm2_3_check_bugs:
-		bics	pc, lr, #0x04000000		@ Clear FIQ disable bit
-
 cpu_arm2_name:
 		.asciz	"ARM 2"
 cpu_arm250_name:
@@ -290,28 +289,25 @@ cpu_arm3_name:
  */
 		.globl	arm2_processor_functions
 arm2_processor_functions:
-		.word	_arm2_3_check_bugs
 		.word	_arm2_proc_init
 		.word	_arm2_proc_fin
-		.word	_arm2_set_pgd
+		.word	_arm2_switch_mm
 		.word	_arm2_xchg_1
 		.word	_arm2_xchg_4
 
 		.globl	arm250_processor_functions
 arm250_processor_functions:
-		.word	_arm2_3_check_bugs
 		.word	_arm2_proc_init
 		.word	_arm2_proc_fin
-		.word	_arm2_set_pgd
+		.word	_arm2_switch_mm
 		.word	_arm3_xchg_1
 		.word	_arm3_xchg_4
 
 		.globl	arm3_processor_functions
 arm3_processor_functions:
-		.word	_arm2_3_check_bugs
 		.word	_arm3_proc_init
 		.word	_arm3_proc_fin
-		.word	_arm3_set_pgd
+		.word	_arm3_switch_mm
 		.word	_arm3_xchg_1
 		.word	_arm3_xchg_4
 

arch/arm/mm/proc-arm6_7.S

@@ -188,20 +188,6 @@ Ldata_lateldrpostreg:
 		addeq	r7, r0, r2
 		b	Ldata_saver7
 
-/*
- * Function: arm6_7_check_bugs (void)
- *	   : arm6_7_proc_init (void)
- *	   : arm6_7_proc_fin (void)
- *
- * Notes   : This processor does not require these
- */
-ENTRY(cpu_arm6_check_bugs)
-ENTRY(cpu_arm7_check_bugs)
-		mrs	ip, cpsr
-		bic	ip, ip, #PSR_F_BIT
-		msr	cpsr, ip
-		mov	pc, lr
-
 ENTRY(cpu_arm6_proc_init)
 ENTRY(cpu_arm7_proc_init)
 		mov	pc, lr
@@ -220,30 +206,19 @@ ENTRY(cpu_arm7_do_idle)
 		mov	pc, lr
 
 /*
- * Function: arm6_7_set_pgd(unsigned long pgd_phys)
+ * Function: arm6_7_switch_mm(unsigned long pgd_phys)
  * Params  : pgd_phys	Physical address of page table
  * Purpose : Perform a task switch, saving the old processes state, and restoring
  *	     the new.
  */
-ENTRY(cpu_arm6_set_pgd)
-ENTRY(cpu_arm7_set_pgd)
+ENTRY(cpu_arm6_switch_mm)
+ENTRY(cpu_arm7_switch_mm)
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
 		mcr	p15, 0, r0, c2, c0, 0		@ update page table ptr
 		mcr	p15, 0, r1, c5, c0, 0		@ flush TLBs
 		mov	pc, lr
 
-/*
- * Function: arm6_flush_pmd(pmdp)
- *
- * Params  : r0 = Address to set
- *
- * Purpose : Set a PMD and flush it out of any WB cache
- */
-ENTRY(cpu_arm6_flush_pmd)
-ENTRY(cpu_arm7_flush_pmd)
-		mov	pc, lr
-
 /*
  * Function: arm6_7_set_pte(pte_t *ptep, pte_t pte)
  * Params  : r0 = Address to set
@@ -324,7 +299,6 @@ __arm7_setup:	mov	r0, #0
 		.type	arm6_processor_functions, #object
 ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_data_abort
-		.word	cpu_arm6_check_bugs
 		.word	cpu_arm6_proc_init
 		.word	cpu_arm6_proc_fin
 		.word	cpu_arm6_reset
@@ -345,8 +319,7 @@ ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_icache_invalidate_page
 
 		/* pgtable */
-		.word	cpu_arm6_set_pgd
-		.word	cpu_arm6_flush_pmd
+		.word	cpu_arm6_switch_mm
 		.word	cpu_arm6_set_pte
 
 		.size	arm6_processor_functions, . - arm6_processor_functions
@@ -358,7 +331,6 @@ ENTRY(arm6_processor_functions)
 		.type	arm7_processor_functions, #object
 ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_data_abort
-		.word	cpu_arm7_check_bugs
 		.word	cpu_arm7_proc_init
 		.word	cpu_arm7_proc_fin
 		.word	cpu_arm7_reset
@@ -379,8 +351,7 @@ ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_icache_invalidate_page
 
 		/* pgtable */
-		.word	cpu_arm7_set_pgd
-		.word	cpu_arm7_flush_pmd
+		.word	cpu_arm7_switch_mm
 		.word	cpu_arm7_set_pte
 
 		.size	arm7_processor_functions, . - arm7_processor_functions

arch/arm/mm/proc-arm720.S

@@ -38,47 +38,12 @@
 #include <asm/hardware.h>
 
 /*
- * Function: arm720_cache_clean_invalidate_all (void)
- *	   : arm720_cache_clean_invalidate_page (unsigned long address, int size,
- *                                    int flags)
- *
- * Params  : address	Area start address
- *	   : size	size of area
- *	   : flags	b0 = I cache as well
- *
- * Purpose : Flush all cache lines
- */
-ENTRY(cpu_arm720_cache_clean_invalidate_all)
-ENTRY(cpu_arm720_cache_clean_invalidate_range)
-ENTRY(cpu_arm720_icache_invalidate_range)
-ENTRY(cpu_arm720_icache_invalidate_page)
-ENTRY(cpu_arm720_dcache_invalidate_range)
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7, 0		@ flush cache
-		mov	pc, lr
-
-/*
- * These just expect cache lines to be cleaned.  Since we have a writethrough
- * cache, we never have any dirty cachelines to worry about.
- */
-ENTRY(cpu_arm720_dcache_clean_range)
-ENTRY(cpu_arm720_dcache_clean_page)
-ENTRY(cpu_arm720_dcache_clean_entry)
-		mov	pc, lr
-
-/*
- * Function: arm720_check_bugs (void)
- *	   : arm720_proc_init (void)
+ * Function: arm720_proc_init (void)
  *	   : arm720_proc_fin (void)
  *
  * Notes   : This processor does not require these
  */
-ENTRY(cpu_arm720_check_bugs)
-		mrs	ip, cpsr
-		bic	ip, ip, #PSR_F_BIT
-		msr	cpsr, ip
-		mov	pc, lr
-
+ENTRY(cpu_arm720_dcache_clean_area)
 ENTRY(cpu_arm720_proc_init)
 		mov	pc, lr
 
@@ -102,28 +67,18 @@ ENTRY(cpu_arm720_do_idle)
 		mov	pc, lr
 
 /*
- * Function: arm720_set_pgd(unsigned long pgd_phys)
+ * Function: arm720_switch_mm(unsigned long pgd_phys)
  * Params  : pgd_phys	Physical address of page table
  * Purpose : Perform a task switch, saving the old process' state and restoring
  *	     the new.
  */
-ENTRY(cpu_arm720_set_pgd)
+ENTRY(cpu_arm720_switch_mm)
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c7, 0		@ invalidate cache
 		mcr	p15, 0, r0, c2, c0, 0		@ update page table ptr
 		mcr	p15, 0, r1, c8, c7, 0		@ flush TLB (v4)
 		mov	pc, lr
 
-/*
- * Function: arm720_flush_pmd(pmdp)
- *
- * Params  : r0 = Address to set
- *
- * Purpose : Set a PMD and flush it out of any WB cache
- */
-ENTRY(cpu_arm720_flush_pmd)
-		mov	pc, lr
-
 /*
  * Function: arm720_set_pte(pte_t *ptep, pte_t pte)
  * Params  : r0 = Address to set
@@ -140,7 +95,7 @@ ENTRY(cpu_arm720_set_pte)
 		bic	r2, r2, #3
 		orr	r2, r2, #HPTE_TYPE_SMALL
 
-		tst	r1, #LPTE_USER | LPTE_EXEC	@ User or Exec?
+		tst	r1, #LPTE_USER			@ User?
 		orrne	r2, r2, #HPTE_AP_READ
 
 		tst	r1, #LPTE_WRITE | LPTE_DIRTY	@ Write and Dirty?
@@ -194,31 +149,13 @@ __arm720_setup:	mov	r0, #0
 		.type	arm720_processor_functions, #object
 ENTRY(arm720_processor_functions)
 		.word	v4t_late_abort
-		.word	cpu_arm720_check_bugs
 		.word	cpu_arm720_proc_init
 		.word	cpu_arm720_proc_fin
 		.word	cpu_arm720_reset
 		.word	cpu_arm720_do_idle
-
-		/* cache */
-		.word	cpu_arm720_cache_clean_invalidate_all
-		.word	cpu_arm720_cache_clean_invalidate_range
-
-		/* dcache */
-		.word	cpu_arm720_dcache_invalidate_range
-		.word	cpu_arm720_dcache_clean_range
-		.word	cpu_arm720_dcache_clean_page
-		.word	cpu_arm720_dcache_clean_entry
-
-		/* icache */
-		.word	cpu_arm720_icache_invalidate_range
-		.word	cpu_arm720_icache_invalidate_page
-
-		/* pgtable */
-		.word	cpu_arm720_set_pgd
-		.word	cpu_arm720_flush_pmd
+		.word	cpu_arm720_dcache_clean_area
+		.word	cpu_arm720_switch_mm
 		.word	cpu_arm720_set_pte
-
 		.size	arm720_processor_functions, . - arm720_processor_functions
 
 		.type	cpu_arch_name, #object
@@ -249,4 +186,5 @@ __arm720_proc_info:
 		.long	arm720_processor_functions
 		.long	v4_tlb_fns
 		.long	v4wt_user_fns
+		.long	v4_cache_fns
 		.size	__arm720_proc_info, . - __arm720_proc_info

arch/arm/mm/proc-sa1100.S

+/*
+ *  linux/arch/arm/mm/proc-sa110.S
+ *
+ *  Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  MMU functions for SA110
+ *
+ *  These are the low level assembler for performing cache and TLB
+ *  functions on the StrongARM-1100 and StrongARM-1110.
+ *
+ *  Note that SA1100 and SA1110 share everything but their name and CPU ID.
+ *
+ *  12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
+ *    Flush the read buffer at context switches
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/constants.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/proc/pgtable.h>
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define DCACHELINESIZE	32
+#define FLUSH_OFFSET	32768
+
+	.macro flush_1100_dcache rd, ra, re
+	ldr	\rd, =flush_base
+	ldr	\ra, [\rd]
+	eor	\ra, \ra, #FLUSH_OFFSET
+	str	\ra, [\rd]
+	add	\re, \ra, #8192			@ only necessary for 8k
+1001:	ldr	\rd, [\ra], #DCACHELINESIZE
+	teq	\re, \ra
+	bne	1001b
+#ifdef FLUSH_BASE_MINICACHE
+	add	\ra, \ra, #FLUSH_BASE_MINICACHE - FLUSH_BASE
+	add	\re, \ra, #512			@ only 512 bytes
+1002:	ldr	\rd, [\ra], #DCACHELINESIZE
+	teq	\re, \ra
+	bne	1002b
+#endif
+	.endm
+
+	.data
+flush_base:
+	.long	FLUSH_BASE
+	.text
+
+	__INIT
+
+/*
+ * cpu_sa1100_proc_init()
+ */
+ENTRY(cpu_sa1100_proc_init)
+	mov	r0, #0
+	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
+	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
+	mov	pc, lr
+
+	.previous
+
+/*
+ * cpu_sa1100_proc_fin()
+ *
+ * Prepare the CPU for reset:
+ *  - Disable interrupts
+ *  - Clean and turn off caches.
+ */
+ENTRY(cpu_sa1100_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	flush_1100_dcache r0, r1, r2		@ clean caches
+	mov	r0, #0
+	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x000e			@ ............wca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_sa1100_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_sa1100_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x000f			@ ............wcam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_sa1100_do_idle(type)
+ *
+ * Cause the processor to idle
+ *
+ * type: call type:
+ *   0 = slow idle
+ *   1 = fast idle
+ *   2 = switch to slow processor clock
+ *   3 = switch to fast processor clock
+ */
+	.align	5
+ENTRY(cpu_sa1100_do_idle)
+	mov	r0, r0				@ 4 nop padding
+	mov	r0, r0
+	mov	r0, r0
+	mov	r0, r0				@ 4 nop padding
+	mov	r0, r0
+	mov	r0, r0
+	mov	r0, #0
+	ldr	r1, =UNCACHEABLE_ADDR		@ ptr to uncacheable address
+	@ --- aligned to a cache line
+	mcr	p15, 0, r0, c15, c2, 2		@ disable clock switching
+	ldr	r1, [r1, #0]			@ force switch to MCLK
+	mcr	p15, 0, r0, c15, c8, 2		@ wait for interrupt
+	mov	r0, r0				@ safety
+	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
+	mov	pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * cpu_sa1100_dcache_clean_area(addr,sz)
+ *
+ * Clean the specified entry of any caches such that the MMU
+ * translation fetches will obtain correct data.
+ *
+ * addr: cache-unaligned virtual address
+ */
+	.align	5
+ENTRY(cpu_sa1100_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #DCACHELINESIZE
+	subs	r1, r1, #DCACHELINESIZE
+	bhi	1b
+	mov	pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_sa1100_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_sa1100_switch_mm)
+	flush_1100_dcache r3, ip, r1
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_sa1100_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_sa1100_set_pte)
+	str	r1, [r0], #-2048		@ linux version
+
+	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	bic	r2, r1, #0xff0
+	bic	r2, r2, #3
+	orr	r2, r2, #PTE_TYPE_SMALL
+
+	tst	r1, #L_PTE_USER			@ User or Exec?
+	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
+
+	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
+	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
+	movne	r2, #0
+
+	str	r2, [r0]			@ hardware version
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+
+cpu_sa1100_name:
+	.asciz	"StrongARM-1100"
+cpu_sa1110_name:
+	.asciz	"StrongARM-1110"
+	.align
+
+	__INIT
+
+__sa1100_setup:
+	mov	r10, #0
+	mcr	p15, 0, r10, c7, c7		@ invalidate I,D caches on v4
+	mcr	p15, 0, r10, c7, c10, 4		@ drain write buffer on v4
+	mcr	p15, 0, r10, c8, c7		@ invalidate I,D TLBs on v4
+	mov	r0, #0x1f			@ Domains 0, 1 = client
+	mcr	p15, 0, r0, c3, c0		@ load domain access register
+	mcr	p15, 0, r4, c2, c0		@ load page table pointer
+	mrc	p15, 0, r0, c1, c0		@ get control register v4
+	bic	r0, r0, #0x0e00			@ ..VI ZFRS BLDP WCAM
+	bic	r0, r0, #0x0002			@ .... 000. .... ..0.
+	orr	r0, r0, #0x003d
+	orr	r0, r0, #0x3100			@ ..11 ...1 ..11 11.1
+	mov	pc, lr
+
+	.text
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+
+/*
+ * SA1100 and SA1110 share the same function calls
+ */
+	.type	sa1100_processor_functions, #object
+ENTRY(sa1100_processor_functions)
+	.word	v4_early_abort
+	.word	cpu_sa1100_proc_init
+	.word	cpu_sa1100_proc_fin
+	.word	cpu_sa1100_reset
+	.word	cpu_sa1100_do_idle
+	.word	cpu_sa1100_dcache_clean_area
+	.word	cpu_sa1100_switch_mm
+	.word	cpu_sa1100_set_pte
+	.size	sa1100_processor_functions, . - sa1100_processor_functions
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv4"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v4"
+	.size	cpu_elf_name, . - cpu_elf_name
+	.align
+
+	.section ".proc.info", #alloc, #execinstr
+
+	.type	__sa1100_proc_info,#object
+__sa1100_proc_info:
+	.long	0x4401a110
+	.long	0xfffffff0
+	.long	0x00000c0e
+	b	__sa1100_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+	.long	cpu_sa1100_name
+	.long	sa1100_processor_functions
+	.long	v4wb_tlb_fns
+	.long	v4_mc_user_fns
+	.long	v4wb_cache_fns
+	.size	__sa1100_proc_info, . - __sa1100_proc_info
+
+	.type	__sa1110_proc_info,#object
+__sa1110_proc_info:
+	.long	0x6901b110
+	.long	0xfffffff0
+	.long	0x00000c0e
+	b	__sa1100_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+	.long	cpu_sa1110_name
+	.long	sa1100_processor_functions
+	.long	v4wb_tlb_fns
+	.long	v4_mc_user_fns
+	.long	v4wb_cache_fns
+	.size	__sa1110_proc_info, . - __sa1110_proc_info

arch/arm/mm/proc-syms.c

@@ -27,7 +27,6 @@ EXPORT_SYMBOL(cpu_dcache_invalidate_range);
 EXPORT_SYMBOL(cpu_icache_invalidate_range);
 EXPORT_SYMBOL(cpu_icache_invalidate_page);
 EXPORT_SYMBOL(cpu_set_pgd);
-EXPORT_SYMBOL(cpu_flush_pmd);
 EXPORT_SYMBOL(cpu_set_pte);
 #else
 EXPORT_SYMBOL(processor);

arch/arm/vmlinux-armv.lds.in

@@ -35,6 +35,9 @@ SECTIONS
 		__setup_start = .;
 			*(.init.setup)
 		__setup_end = .;
+		__early_begin = .;
+			*(__early_param)
+		__early_end = .;
 		__start___param = .;
 			*(__param)
 		__stop___param = .;

drivers/mtd/maps/iq80321.c

@@ -67,17 +67,17 @@ static void iq80321_copy_to(struct map_info *map, unsigned long to, const void *
 }
 
 static struct map_info iq80321_map = {
-	name	= "IQ80321 flash",
-	size	= WINDOW_SIZE,
-	buswidth	= BUSWIDTH,
-	read8	= iq80321_read8,
-	read16	= iq80321_read16,
-	read32	= iq80321_read32,
-	copy_from	= iq80321_copy_from,
-	write8	= iq80321_write8,
-	write16	= iq80321_write16,
-	write32	= iq80321_write32,
-	copy_to	= iq80321_copy_to
+	.name	= "IQ80321 flash",
+	.size	= WINDOW_SIZE,
+	.buswidth	= BUSWIDTH,
+	.read8	= iq80321_read8,
+	.read16	= iq80321_read16,
+	.read32	= iq80321_read32,
+	.copy_from	= iq80321_copy_from,
+	.write8	= iq80321_write8,
+	.write16	= iq80321_write16,
+	.write32	= iq80321_write32,
+	.copy_to	= iq80321_copy_to
 };
 
 static struct mtd_partition iq80321_partitions[4] = {

drivers/video/cyber2000fb.c

@@ -55,6 +55,10 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef __arm__
+#include <asm/mach-types.h>
+#endif
+
 #include "cyber2000fb.h"
 
 struct cfb_info {

include/asm-arm/arch-iop3xx/iop310-irqs.h

+/*
+ * linux/include/asm-arm/arch-iop310/irqs.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 06/13/01: Added 80310 on-chip interrupt sources <dsaxena@mvista.com>
+ *
+ */
+#include <linux/config.h>
+
+/*
+ * XS80200 specific IRQs
+ */
+#define IRQ_XS80200_BCU		0	/* Bus Control Unit */
+#define IRQ_XS80200_PMU		1	/* Performance Monitoring Unit */
+#define IRQ_XS80200_EXTIRQ	2	/* external IRQ signal */
+#define IRQ_XS80200_EXTFIQ	3	/* external IRQ signal */
+
+#define NR_XS80200_IRQS		4
+
+#define XSCALE_PMU_IRQ		IRQ_XS80200_PMU
+
+/*
+ * IOP80310 chipset interrupts
+ */
+#define IOP310_IRQ_OFS		NR_XS80200_IRQS
+#define IOP310_IRQ(x)		(IOP310_IRQ_OFS + (x))
+
+/*
+ * On FIQ1ISR register
+ */
+#define IRQ_IOP310_DMA0		IOP310_IRQ(0)	/* DMA Channel 0 */
+#define IRQ_IOP310_DMA1		IOP310_IRQ(1)	/* DMA Channel 1 */
+#define IRQ_IOP310_DMA2		IOP310_IRQ(2)	/* DMA Channel 2 */
+#define IRQ_IOP310_PMON		IOP310_IRQ(3)	/* Bus performance Unit */
+#define IRQ_IOP310_AAU		IOP310_IRQ(4)	/* Application Accelator Unit */
+
+/*
+ * On FIQ2ISR register
+ */
+#define IRQ_IOP310_I2C		IOP310_IRQ(5)	/* I2C unit */
+#define IRQ_IOP310_MU		IOP310_IRQ(6)	/* messaging unit */
+
+#define NR_IOP310_IRQS		(IOP310_IRQ(6) + 1)
+
+#define NR_IRQS			NR_IOP310_IRQS
+
+
+/*
+ * Interrupts available on the Cyclone IQ80310 board
+ */
+#ifdef CONFIG_ARCH_IQ80310
+
+#define IQ80310_IRQ_OFS		NR_IOP310_IRQS
+#define IQ80310_IRQ(y)		((IQ80310_IRQ_OFS) + (y))
+
+#define IRQ_IQ80310_TIMER	IQ80310_IRQ(0)	/* Timer Interrupt */
+#define IRQ_IQ80310_I82559	IQ80310_IRQ(1)	/* I82559 Ethernet Interrupt */
+#define IRQ_IQ80310_UART1	IQ80310_IRQ(2)	/* UART1 Interrupt */
+#define IRQ_IQ80310_UART2	IQ80310_IRQ(3)	/* UART2 Interrupt */
+#define IRQ_IQ80310_INTD	IQ80310_IRQ(4)	/* PCI INTD */
+
+
+/*
+ * ONLY AVAILABLE ON REV F OR NEWER BOARDS!
+ */
+#define	IRQ_IQ80310_INTA	IQ80310_IRQ(5)	/* PCI INTA */
+#define	IRQ_IQ80310_INTB	IQ80310_IRQ(6)	/* PCI INTB */
+#define	IRQ_IQ80310_INTC	IQ80310_IRQ(7)	/* PCI INTC */
+
+#undef	NR_IRQS
+#define NR_IRQS			(IQ80310_IRQ(7) + 1)
+
+#endif // CONFIG_ARCH_IQ80310
+

include/asm-arm/bugs.h

 /*
  *  linux/include/asm-arm/bugs.h
  *
- *  Copyright (C) 1995  Russell King
+ *  Copyright (C) 1995-2003 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,6 +12,6 @@
 
 #include <asm/proc-fns.h>
 
-#define check_bugs() cpu_check_bugs()
+#define check_bugs() do { } while (0)
 
 #endif

include/asm-arm/cpu-multi26.h

@@ -19,14 +19,12 @@ struct task_struct;
  * relies on it.
  */
 extern struct processor {
-	/* check for any bugs */
-	void (*_check_bugs)(void);
 	/* Set up any processor specifics */
 	void (*_proc_init)(void);
 	/* Disable any processor specifics */
 	void (*_proc_fin)(void);
 	/* set the MEMC hardware mappings */
-	void (*_set_pgd)(pgd_t *pgd);
+	void (*_switch_mm)(pgd_t *pgd);
 	/* XCHG */
 	unsigned long (*_xchg_1)(unsigned long x, volatile void *ptr);
 	unsigned long (*_xchg_4)(unsigned long x, volatile void *ptr);
@@ -36,11 +34,10 @@ extern const struct processor arm2_processor_functions;
 extern const struct processor arm250_processor_functions;
 extern const struct processor arm3_processor_functions;
 
-#define cpu_check_bugs()			processor._check_bugs()
 #define cpu_proc_init()				processor._proc_init()
 #define cpu_proc_fin()				processor._proc_fin()
 #define cpu_do_idle()				do { } while (0)
-#define cpu_switch_mm(pgd,mm)			processor._set_pgd(pgd)
+#define cpu_switch_mm(pgd,mm)			processor._switch_mm(pgd)
 #define cpu_xchg_1(x,ptr)			processor._xchg_1(x,ptr)
 #define cpu_xchg_4(x,ptr)			processor._xchg_4(x,ptr)
 

include/asm-arm/cpu-single.h

@@ -22,21 +22,12 @@
  * function pointers for this lot.  Otherwise, we can optimise the
  * table away.
  */
-#define cpu_check_bugs			__cpu_fn(CPU_NAME,_check_bugs)
 #define cpu_proc_init			__cpu_fn(CPU_NAME,_proc_init)
 #define cpu_proc_fin			__cpu_fn(CPU_NAME,_proc_fin)
 #define cpu_reset			__cpu_fn(CPU_NAME,_reset)
 #define cpu_do_idle			__cpu_fn(CPU_NAME,_do_idle)
-#define cpu_cache_clean_invalidate_all	__cpu_fn(CPU_NAME,_cache_clean_invalidate_all)
-#define cpu_cache_clean_invalidate_range __cpu_fn(CPU_NAME,_cache_clean_invalidate_range)
-#define cpu_dcache_invalidate_range	__cpu_fn(CPU_NAME,_dcache_invalidate_range)
-#define cpu_dcache_clean_range		__cpu_fn(CPU_NAME,_dcache_clean_range)
-#define cpu_dcache_clean_page		__cpu_fn(CPU_NAME,_dcache_clean_page)
-#define cpu_dcache_clean_entry		__cpu_fn(CPU_NAME,_dcache_clean_entry)
-#define cpu_icache_invalidate_range	__cpu_fn(CPU_NAME,_icache_invalidate_range)
-#define cpu_icache_invalidate_page	__cpu_fn(CPU_NAME,_icache_invalidate_page)
-#define cpu_set_pgd			__cpu_fn(CPU_NAME,_set_pgd)
-#define cpu_flush_pmd			__cpu_fn(CPU_NAME,_flush_pmd)
+#define cpu_dcache_clean_area		__cpu_fn(CPU_NAME,_dcache_clean_area)
+#define cpu__switch_mm			__cpu_fn(CPU_NAME,_switch_mm)
 #define cpu_set_pte			__cpu_fn(CPU_NAME,_set_pte)
 
 #ifndef __ASSEMBLY__
@@ -47,36 +38,22 @@
 struct mm_struct;
 
 /* declare all the functions as extern */
-extern void cpu_data_abort(unsigned long pc);
-extern void cpu_check_bugs(void);
 extern void cpu_proc_init(void);
 extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
-
-extern void cpu_cache_clean_invalidate_all(void);
-extern void cpu_cache_clean_invalidate_range(unsigned long address, unsigned long end, int flags);
-
-extern void cpu_dcache_invalidate_range(unsigned long start, unsigned long end);
-extern void cpu_dcache_clean_range(unsigned long start, unsigned long end);
-extern void cpu_dcache_clean_page(void *virt_page);
-extern void cpu_dcache_clean_entry(unsigned long address);
-
-extern void cpu_icache_invalidate_range(unsigned long start, unsigned long end);
-extern void cpu_icache_invalidate_page(void *virt_page);
-
-extern void cpu_set_pgd(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_flush_pmd(pmd_t *pmdp);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu__switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
 extern void cpu_set_pte(pte_t *ptep, pte_t pte);
 
 extern volatile void cpu_reset(unsigned long addr);
 
-#define cpu_switch_mm(pgd,mm) cpu_set_pgd(__virt_to_phys((unsigned long)(pgd)),mm)
+#define cpu_switch_mm(pgd,mm) cpu__switch_mm(__virt_to_phys((unsigned long)(pgd)),mm)
 
 #define cpu_get_pgd()	\
 	({						\
 		unsigned long pg;			\
 		__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
-			 : "=r" (pg));			\
+			 : "=r" (pg) : : "cc");		\
 		pg &= ~0x3fff;				\
 		(pgd_t *)phys_to_virt(pg);		\
 	})