cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()

In preparation for changing how the driver handles 'mem_enable' in the CXL
DVSEC control register. Merge the contents of cxl_hdm_decode_init() into
cxl_dvsec_ranges() and rename the combined function cxl_hdm_decode_init().
The possible cleanups and fixes that result from this merge are saved for a
follow-on change.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165291690027.1426646.10249756632415633752.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/cxl/core/pci.c

@@ -175,12 +175,70 @@ static int wait_for_valid(struct cxl_dev_state *cxlds)
 	return -ETIMEDOUT;
 }
 
-/*
- * Return positive number of non-zero ranges on success and a negative
- * error code on failure. The cxl_mem driver depends on ranges == 0 to
- * init HDM operation.
+static bool __cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
+				  struct cxl_endpoint_dvsec_info *info)
+{
+	struct cxl_register_map map;
+	struct cxl_component_reg_map *cmap = &map.component_map;
+	bool global_enable, retval = false;
+	void __iomem *crb;
+	u32 global_ctrl;
+
+	/* map hdm decoder */
+	crb = ioremap(cxlds->component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE);
+	if (!crb) {
+		dev_dbg(cxlds->dev, "Failed to map component registers\n");
+		return false;
+	}
+
+	cxl_probe_component_regs(cxlds->dev, crb, cmap);
+	if (!cmap->hdm_decoder.valid) {
+		dev_dbg(cxlds->dev, "Invalid HDM decoder registers\n");
+		goto out;
+	}
+
+	global_ctrl = readl(crb + cmap->hdm_decoder.offset +
+			    CXL_HDM_DECODER_CTRL_OFFSET);
+	global_enable = global_ctrl & CXL_HDM_DECODER_ENABLE;
+
+	/*
+	 * Per CXL 2.0 Section 8.1.3.8.3 and 8.1.3.8.4 DVSEC CXL Range 1 Base
+	 * [High,Low] when HDM operation is enabled the range register values
+	 * are ignored by the device, but the spec also recommends matching the
+	 * DVSEC Range 1,2 to HDM Decoder Range 0,1. So, non-zero info->ranges
+	 * are expected even though Linux does not require or maintain that
+	 * match.
 	 */
-int cxl_dvsec_ranges(struct cxl_dev_state *cxlds,
+	if (!global_enable && info->mem_enabled && info->ranges)
+		goto out;
+
+	retval = true;
+
+	/*
+	 * Permanently (for this boot at least) opt the device into HDM
+	 * operation. Individual HDM decoders still need to be enabled after
+	 * this point.
+	 */
+	if (!global_enable) {
+		dev_dbg(cxlds->dev, "Enabling HDM decode\n");
+		writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
+		       crb + cmap->hdm_decoder.offset +
+			       CXL_HDM_DECODER_CTRL_OFFSET);
+	}
+
+out:
+	iounmap(crb);
+	return retval;
+}
+
+/**
+ * cxl_hdm_decode_init() - Setup HDM decoding for the endpoint
+ * @cxlds: Device state
+ * @info: DVSEC Range cached enumeration
+ *
+ * Try to enable the endpoint's HDM Decoder Capability
+ */
+int cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
 			struct cxl_endpoint_dvsec_info *info)
 {
 	struct pci_dev *pdev = to_pci_dev(cxlds->dev);
@@ -270,6 +328,16 @@ int cxl_dvsec_ranges(struct cxl_dev_state *cxlds,
 
 	info->ranges = ranges;
 
+	/*
+	 * If DVSEC ranges are being used instead of HDM decoder registers there
+	 * is no use in trying to manage those.
+	 */
+	if (!__cxl_hdm_decode_init(cxlds, info)) {
+		dev_err(dev,
+			"Legacy range registers configuration prevents HDM operation.\n");
+		return -EBUSY;
+	}
+
 	return 0;
 }
-EXPORT_SYMBOL_NS_GPL(cxl_dvsec_ranges, CXL);
+EXPORT_SYMBOL_NS_GPL(cxl_hdm_decode_init, CXL);

drivers/cxl/cxlpci.h

@@ -74,6 +74,6 @@ static inline resource_size_t cxl_regmap_to_base(struct pci_dev *pdev,
 int devm_cxl_port_enumerate_dports(struct cxl_port *port);
 struct cxl_dev_state;
 struct cxl_endpoint_dvsec_info;
-int cxl_dvsec_ranges(struct cxl_dev_state *cxlds,
+int cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
 			struct cxl_endpoint_dvsec_info *info);
 #endif /* __CXL_PCI_H__ */

drivers/cxl/mem.c

@@ -46,74 +46,6 @@ static int create_endpoint(struct cxl_memdev *cxlmd,
 	return cxl_endpoint_autoremove(cxlmd, endpoint);
 }
 
-/**
- * cxl_hdm_decode_init() - Setup HDM decoding for the endpoint
- * @cxlds: Device state
- *
- * Additionally, enables global HDM decoding. Warning: don't call this outside
- * of probe. Once probe is complete, the port driver owns all access to the HDM
- * decoder registers.
- *
- * Returns: false if DVSEC Ranges are being used instead of HDM
- * decoders, or if it can not be determined if DVSEC Ranges are in use.
- * Otherwise, returns true.
- */
-__mock bool cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
-				struct cxl_endpoint_dvsec_info *info)
-{
-	struct cxl_register_map map;
-	struct cxl_component_reg_map *cmap = &map.component_map;
-	bool global_enable, retval = false;
-	void __iomem *crb;
-	u32 global_ctrl;
-
-	/* map hdm decoder */
-	crb = ioremap(cxlds->component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE);
-	if (!crb) {
-		dev_dbg(cxlds->dev, "Failed to map component registers\n");
-		return false;
-	}
-
-	cxl_probe_component_regs(cxlds->dev, crb, cmap);
-	if (!cmap->hdm_decoder.valid) {
-		dev_dbg(cxlds->dev, "Invalid HDM decoder registers\n");
-		goto out;
-	}
-
-	global_ctrl = readl(crb + cmap->hdm_decoder.offset +
-			    CXL_HDM_DECODER_CTRL_OFFSET);
-	global_enable = global_ctrl & CXL_HDM_DECODER_ENABLE;
-
-	/*
-	 * Per CXL 2.0 Section 8.1.3.8.3 and 8.1.3.8.4 DVSEC CXL Range 1 Base
-	 * [High,Low] when HDM operation is enabled the range register values
-	 * are ignored by the device, but the spec also recommends matching the
-	 * DVSEC Range 1,2 to HDM Decoder Range 0,1. So, non-zero info->ranges
-	 * are expected even though Linux does not require or maintain that
-	 * match.
-	 */
-	if (!global_enable && info->mem_enabled && info->ranges)
-		goto out;
-
-	retval = true;
-
-	/*
-	 * Permanently (for this boot at least) opt the device into HDM
-	 * operation. Individual HDM decoders still need to be enabled after
-	 * this point.
-	 */
-	if (!global_enable) {
-		dev_dbg(cxlds->dev, "Enabling HDM decode\n");
-		writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
-		       crb + cmap->hdm_decoder.offset +
-			       CXL_HDM_DECODER_CTRL_OFFSET);
-	}
-
-out:
-	iounmap(crb);
-	return retval;
-}
-
 static void enable_suspend(void *data)
 {
 	cxl_mem_active_dec();
@@ -163,7 +95,7 @@ static int cxl_mem_probe(struct device *dev)
 	if (rc)
 		return rc;
 
-	rc = cxl_dvsec_ranges(cxlds, &info);
+	rc = cxl_hdm_decode_init(cxlds, &info);
 	if (rc)
 		return rc;
 
@@ -173,16 +105,6 @@ static int cxl_mem_probe(struct device *dev)
 		return rc;
 	}
 
-	/*
-	 * If DVSEC ranges are being used instead of HDM decoder registers there
-	 * is no use in trying to manage those.
-	 */
-	if (!cxl_hdm_decode_init(cxlds, &info)) {
-		dev_err(dev,
-			"Legacy range registers configuration prevents HDM operation.\n");
-		return -EBUSY;
-	}
-
 	/*
 	 * The kernel may be operating out of CXL memory on this device,
 	 * there is no spec defined way to determine whether this device

tools/testing/cxl/Kbuild

@@ -9,7 +9,7 @@ ldflags-y += --wrap=devm_cxl_setup_hdm
 ldflags-y += --wrap=devm_cxl_add_passthrough_decoder
 ldflags-y += --wrap=devm_cxl_enumerate_decoders
 ldflags-y += --wrap=cxl_await_media_ready
-ldflags-y += --wrap=cxl_dvsec_ranges
+ldflags-y += --wrap=cxl_hdm_decode_init
 
 DRIVERS := ../../../drivers
 CXL_SRC := $(DRIVERS)/cxl
@@ -36,7 +36,6 @@ cxl_port-y += config_check.o
 obj-m += cxl_mem.o
 
 cxl_mem-y := $(CXL_SRC)/mem.o
-cxl_mem-y += mock_mem.o
 cxl_mem-y += config_check.o
 
 obj-m += cxl_core.o

tools/testing/cxl/mock_mem.c

-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright(c) 2022 Intel Corporation. All rights reserved. */
-
-#include <linux/types.h>
-
-struct cxl_dev_state;
-bool cxl_hdm_decode_init(struct cxl_dev_state *cxlds)
-{
-	return true;
-}

tools/testing/cxl/test/mock.c

@@ -208,7 +208,7 @@ int __wrap_cxl_await_media_ready(struct cxl_dev_state *cxlds)
 }
 EXPORT_SYMBOL_NS_GPL(__wrap_cxl_await_media_ready, CXL);
 
-int __wrap_cxl_dvsec_ranges(struct cxl_dev_state *cxlds,
+int __wrap_cxl_hdm_decode_init(struct cxl_dev_state *cxlds,
 				struct cxl_endpoint_dvsec_info *info)
 {
 	int rc = 0, index;
@@ -217,12 +217,12 @@ int __wrap_cxl_dvsec_ranges(struct cxl_dev_state *cxlds,
 	if (ops && ops->is_mock_dev(cxlds->dev))
 		info->mem_enabled = 1;
 	else
-		rc = cxl_dvsec_ranges(cxlds, info);
+		rc = cxl_hdm_decode_init(cxlds, info);
 	put_cxl_mock_ops(index);
 
 	return rc;
 }
-EXPORT_SYMBOL_NS_GPL(__wrap_cxl_dvsec_ranges, CXL);
+EXPORT_SYMBOL_NS_GPL(__wrap_cxl_hdm_decode_init, CXL);
 
 MODULE_LICENSE("GPL v2");
 MODULE_IMPORT_NS(ACPI);