Commit a233bb74 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...
parents 878ba61a 880c0d14
...@@ -15,6 +15,13 @@ Required root node property: ...@@ -15,6 +15,13 @@ Required root node property:
compatible: must contain "marvell,armada385" compatible: must contain "marvell,armada385"
In addition, boards using the Marvell Armada 388 SoC shall have the
following property before the previous one:
Required root node property:
compatible: must contain "marvell,armada388"
Example: Example:
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
Conexant Digicolor Platforms Device Tree Bindings
Each device tree must specify which Conexant Digicolor SoC it uses.
Must be the following compatible string:
cnxt,cx92755
...@@ -23,7 +23,7 @@ Optional Properties: ...@@ -23,7 +23,7 @@ Optional Properties:
devices in this power domain. Maximum of 4 pairs (N = 0 to 3) devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently. are supported currently.
Node of a device using power domains must have a samsung,power-domain property Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain. defined with a phandle to respective power domain.
Example: Example:
......
...@@ -124,3 +124,11 @@ Example: ...@@ -124,3 +124,11 @@ Example:
compatible = "fsl,ls1021a-dcfg"; compatible = "fsl,ls1021a-dcfg";
reg = <0x0 0x1ee0000 0x0 0x10000>; reg = <0x0 0x1ee0000 0x0 0x10000>;
}; };
Freescale LS2085A SoC Device Tree Bindings
------------------------------------------
LS2085A ARMv8 based Simulator model
Required root node properties:
- compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
...@@ -9,6 +9,10 @@ HiP04 D01 Board ...@@ -9,6 +9,10 @@ HiP04 D01 Board
Required root node properties: Required root node properties:
- compatible = "hisilicon,hip04-d01"; - compatible = "hisilicon,hip04-d01";
HiP01 ca9x2 Board
Required root node properties:
- compatible = "hisilicon,hip01-ca9x2";
Hisilicon system controller Hisilicon system controller
...@@ -36,6 +40,27 @@ Example: ...@@ -36,6 +40,27 @@ Example:
reboot-offset = <0x4>; reboot-offset = <0x4>;
}; };
-----------------------------------------------------------------------
Hisilicon HiP01 system controller
Required properties:
- compatible : "hisilicon,hip01-sysctrl"
- reg : Register address and size
The HiP01 system controller is mostly compatible with hisilicon
system controller,but it has some specific control registers for
HIP01 SoC family, such as slave core boot, and also some same
registers located at different offset.
Example:
/* for hip01-ca9x2 */
sysctrl: system-controller@10000000 {
compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
reg = <0x10000000 0x1000>;
reboot-offset = <0x4>;
};
----------------------------------------------------------------------- -----------------------------------------------------------------------
Hisilicon CPU controller Hisilicon CPU controller
......
...@@ -7,6 +7,7 @@ Required properties: ...@@ -7,6 +7,7 @@ Required properties:
- compatible: should be one of: - compatible: should be one of:
"mediatek,mt8135-sysirq" "mediatek,mt8135-sysirq"
"mediatek,mt8127-sysirq" "mediatek,mt8127-sysirq"
"mediatek,mt6592-sysirq"
"mediatek,mt6589-sysirq" "mediatek,mt6589-sysirq"
"mediatek,mt6582-sysirq" "mediatek,mt6582-sysirq"
"mediatek,mt6577-sysirq" "mediatek,mt6577-sysirq"
......
...@@ -9,6 +9,16 @@ Rockchip platforms device tree bindings ...@@ -9,6 +9,16 @@ Rockchip platforms device tree bindings
Required root node properties: Required root node properties:
- compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
- ChipSPARK Rayeager PX2 board:
Required root node properties:
- compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
- Radxa Rock board: - Radxa Rock board:
Required root node properties: Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188"; - compatible = "radxa,rock", "rockchip,rk3188";
- Firefly Firefly-RK3288 board:
Required root node properties:
- compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
or
- compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
SAMSUNG Exynos SoCs Chipid driver.
Required properties:
- compatible : Should at least contain "samsung,exynos4210-chipid".
- reg: offset and length of the register set
Example:
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
};
...@@ -3,7 +3,9 @@ CSR SiRFprimaII and SiRFmarco device tree bindings. ...@@ -3,7 +3,9 @@ CSR SiRFprimaII and SiRFmarco device tree bindings.
Required root node properties: Required root node properties:
- compatible: - compatible:
- "sirf,atlas6-cb" : atlas6 "cb" evaluation board
- "sirf,atlas6" : atlas6 device based board
- "sirf,atlas7-cb" : atlas7 "cb" evaluation board
- "sirf,atlas7" : atlas7 device based board
- "sirf,prima2-cb" : prima2 "cb" evaluation board - "sirf,prima2-cb" : prima2 "cb" evaluation board
- "sirf,marco-cb" : marco "cb" evaluation board
- "sirf,prima2" : prima2 device based board - "sirf,prima2" : prima2 device based board
- "sirf,marco" : marco device based board
...@@ -6,8 +6,8 @@ Required properties: ...@@ -6,8 +6,8 @@ Required properties:
- compatible: Should be set to one of the following: - compatible: Should be set to one of the following:
marvell,armada370-mbus marvell,armada370-mbus
marvell,armadaxp-mbus marvell,armadaxp-mbus
marvell,armada370-mbus marvell,armada375-mbus
marvell,armadaxp-mbus marvell,armada380-mbus
marvell,kirkwood-mbus marvell,kirkwood-mbus
marvell,dove-mbus marvell,dove-mbus
marvell,orion5x-88f5281-mbus marvell,orion5x-88f5281-mbus
......
Alphascale Clock Controller
The ACC (Alphascale Clock Controller) is responsible of choising proper
clock source, setting deviders and clock gates.
Required properties for the ACC node:
- compatible: must be "alphascale,asm9260-clock-controller"
- reg: must contain the ACC register base and size
- #clock-cells : shall be set to 1.
Simple one-cell clock specifier format is used, where the only cell is used
as an index of the clock inside the provider.
It is encouraged to use dt-binding for clock index definitions. SoC specific
dt-binding should be included to the device tree descriptor. For example
Alphascale ASM9260:
#include <dt-bindings/clock/alphascale,asm9260.h>
This binding contains two types of clock providers:
_AHB_ - AHB gate;
_SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
All clock specific details can be found in the SoC documentation.
CLKID_AHB_ROM 0
CLKID_AHB_RAM 1
CLKID_AHB_GPIO 2
CLKID_AHB_MAC 3
CLKID_AHB_EMI 4
CLKID_AHB_USB0 5
CLKID_AHB_USB1 6
CLKID_AHB_DMA0 7
CLKID_AHB_DMA1 8
CLKID_AHB_UART0 9
CLKID_AHB_UART1 10
CLKID_AHB_UART2 11
CLKID_AHB_UART3 12
CLKID_AHB_UART4 13
CLKID_AHB_UART5 14
CLKID_AHB_UART6 15
CLKID_AHB_UART7 16
CLKID_AHB_UART8 17
CLKID_AHB_UART9 18
CLKID_AHB_I2S0 19
CLKID_AHB_I2C0 20
CLKID_AHB_I2C1 21
CLKID_AHB_SSP0 22
CLKID_AHB_IOCONFIG 23
CLKID_AHB_WDT 24
CLKID_AHB_CAN0 25
CLKID_AHB_CAN1 26
CLKID_AHB_MPWM 27
CLKID_AHB_SPI0 28
CLKID_AHB_SPI1 29
CLKID_AHB_QEI 30
CLKID_AHB_QUADSPI0 31
CLKID_AHB_CAMIF 32
CLKID_AHB_LCDIF 33
CLKID_AHB_TIMER0 34
CLKID_AHB_TIMER1 35
CLKID_AHB_TIMER2 36
CLKID_AHB_TIMER3 37
CLKID_AHB_IRQ 38
CLKID_AHB_RTC 39
CLKID_AHB_NAND 40
CLKID_AHB_ADC0 41
CLKID_AHB_LED 42
CLKID_AHB_DAC0 43
CLKID_AHB_LCD 44
CLKID_AHB_I2S1 45
CLKID_AHB_MAC1 46
CLKID_SYS_CPU 47
CLKID_SYS_AHB 48
CLKID_SYS_I2S0M 49
CLKID_SYS_I2S0S 50
CLKID_SYS_I2S1M 51
CLKID_SYS_I2S1S 52
CLKID_SYS_UART0 53
CLKID_SYS_UART1 54
CLKID_SYS_UART2 55
CLKID_SYS_UART3 56
CLKID_SYS_UART4 56
CLKID_SYS_UART5 57
CLKID_SYS_UART6 58
CLKID_SYS_UART7 59
CLKID_SYS_UART8 60
CLKID_SYS_UART9 61
CLKID_SYS_SPI0 62
CLKID_SYS_SPI1 63
CLKID_SYS_QUADSPI 64
CLKID_SYS_SSP0 65
CLKID_SYS_NAND 66
CLKID_SYS_TRACE 67
CLKID_SYS_CAMM 68
CLKID_SYS_WDT 69
CLKID_SYS_CLKOUT 70
CLKID_SYS_MAC 71
CLKID_SYS_LCD 72
CLKID_SYS_ADCANA 73
Example of clock consumer with _SYS_ and _AHB_ sinks.
uart4: serial@80010000 {
compatible = "alphascale,asm9260-uart";
reg = <0x80010000 0x4000>;
clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
interrupts = <19>;
status = "disabled";
};
Clock consumer with only one, _AHB_ sink.
timer0: timer@80088000 {
compatible = "alphascale,asm9260-timer";
reg = <0x80088000 0x4000>;
clocks = <&acc CLKID_AHB_TIMER0>;
interrupts = <29>;
};
...@@ -45,7 +45,7 @@ Required properties: ...@@ -45,7 +45,7 @@ Required properties:
Exynos4 SoCs, there needs no "master" clock. Exynos4 SoCs, there needs no "master" clock.
Exynos5 SoCs, some System MMUs must have "master" clocks. Exynos5 SoCs, some System MMUs must have "master" clocks.
- clocks: Required if the System MMU is needed to gate its clock. - clocks: Required if the System MMU is needed to gate its clock.
- samsung,power-domain: Required if the System MMU is needed to gate its power. - power-domains: Required if the System MMU is needed to gate its power.
Please refer to the following document: Please refer to the following document:
Documentation/devicetree/bindings/arm/exynos/power_domain.txt Documentation/devicetree/bindings/arm/exynos/power_domain.txt
...@@ -54,7 +54,7 @@ Examples: ...@@ -54,7 +54,7 @@ Examples:
compatible = "samsung,exynos5-gsc"; compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>; reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>; interrupts = <0 85 0>;
samsung,power-domain = <&pd_gsc>; power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>; clocks = <&clock CLK_GSCL0>;
clock-names = "gscl"; clock-names = "gscl";
}; };
...@@ -66,5 +66,5 @@ Examples: ...@@ -66,5 +66,5 @@ Examples:
interrupts = <2 0>; interrupts = <2 0>;
clock-names = "sysmmu", "master"; clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
samsung,power-domain = <&pd_gsc>; power-domains = <&pd_gsc>;
}; };
...@@ -28,7 +28,7 @@ Required properties: ...@@ -28,7 +28,7 @@ Required properties:
for DMA contiguous memory allocation and its size. for DMA contiguous memory allocation and its size.
Optional properties: Optional properties:
- samsung,power-domain : power-domain property defined with a phandle - power-domains : power-domain property defined with a phandle
to respective power domain. to respective power domain.
Example: Example:
...@@ -38,7 +38,7 @@ mfc: codec@13400000 { ...@@ -38,7 +38,7 @@ mfc: codec@13400000 {
compatible = "samsung,mfc-v5"; compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>; reg = <0x13400000 0x10000>;
interrupts = <0 94 0>; interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>; power-domains = <&pd_mfc>;
clocks = <&clock 273>; clocks = <&clock 273>;
clock-names = "mfc"; clock-names = "mfc";
}; };
......
DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
=================================================================
Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
These memory controllers differ from one SoC variant to another, and are called
by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
(DBSC3)", "SDRAM Bus State Controller (SBSC)").
Currently memory controller device nodes are used only to reference PM
domains, and prevent these PM domains from being powered down, which would
crash the system.
As there exist no actual drivers for these controllers yet, these bindings
should be considered EXPERIMENTAL for now.
Required properties:
- compatible: Must be one of the following SoC-specific values:
- "renesas,dbsc-r8a73a4" (R-Mobile APE6)
- "renesas,dbsc3-r8a7740" (R-Mobile A1)
- "renesas,sbsc-sh73a0" (SH-Mobile AG5)
- reg: Must contain the base address and length of the memory controller's
registers.
Optional properties:
- interrupts: Must contain a list of interrupt specifiers for memory
controller interrupts, if available.
- interrupts-names: Must contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Valid interrupt names are:
- "sec" (secure interrupt)
- "temp" (normal (temperature) interrupt)
- power-domains: Must contain a reference to the PM domain that the memory
controller belongs to, if available.
Example:
sbsc1: memory-controller@fe400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfe400000 0x400>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
<0 36 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
power-domains = <&pd_a4bc0>;
};
* Freescale Management Complex
The Freescale Management Complex (fsl-mc) is a hardware resource
manager that manages specialized hardware objects used in
network-oriented packet processing applications. After the fsl-mc
block is enabled, pools of hardware resources are available, such as
queues, buffer pools, I/O interfaces. These resources are building
blocks that can be used to create functional hardware objects/devices
such as network interfaces, crypto accelerator instances, L2 switches,
etc.
Required properties:
- compatible
Value type: <string>
Definition: Must be "fsl,qoriq-mc". A Freescale Management Complex
compatible with this binding must have Block Revision
Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
the MC control register region.
- reg
Value type: <prop-encoded-array>
Definition: A standard property. Specifies one or two regions
defining the MC's registers:
-the first region is the command portal for the
this machine and must always be present
-the second region is the MC control registers. This
region may not be present in some scenarios, such
as in the device tree presented to a virtual machine.
Example:
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
};
DT bindings for the Renesas R-Mobile System Controller
== System Controller Node ==
The R-Mobile System Controller provides the following functions:
- Boot mode management,
- Reset generation,
- Power management.
Required properties:
- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
fallback.
Examples with soctypes are:
- "renesas,sysc-r8a7740" (R-Mobile A1)
- "renesas,sysc-sh73a0" (SH-Mobile AG5)
- reg: Two address start and address range blocks for the device:
- The first block refers to the normally accessible registers,
- the second block refers to the registers protected by the HPB
semaphore.
Optional nodes:
- pm-domains: This node contains a hierarchy of PM domain nodes, which should
match the Power Area Hierarchy in the Power Domain Specifications section of
the device's datasheet.
== PM Domain Nodes ==
Each of the PM domain nodes represents a PM domain, as documented by the
generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
The nodes should be named by the real power area names, and thus their names
should be unique.
Required properties:
- #power-domain-cells: Must be 0.
Optional properties:
- reg: If the PM domain is not always-on, this property must contain the bit
index number for the corresponding power area in the various Power
Control and Status Registers. The parent's node must contain the
following two properties:
- #address-cells: Must be 1,
- #size-cells: Must be 0.
If the PM domain is always-on, this property must be omitted.
Example:
This shows a subset of the r8a7740 PM domain hierarchy, containing the
C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
which is a subdomain of A4S.
sysc: system-controller@e6180000 {
compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
pm-domains {
pd_c5: c5 {
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <0>;
pd_a4s: a4s@10 {
reg = <10>;
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <0>;
pd_a3sp: a3sp@11 {
reg = <11>;
#power-domain-cells = <0>;
};
};
pd_a4su: a4su@20 {
reg = <20>;
#power-domain-cells = <0>;
};
};
};
};
== PM Domain Consumers ==
Hardware blocks belonging to a PM domain should contain a "power-domains"
property that is a phandle pointing to the corresponding PM domain node.
Example:
tpu: pwm@e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
power-domains = <&pd_a3sp>;
#pwm-cells = <3>;
};
...@@ -2,6 +2,8 @@ ...@@ -2,6 +2,8 @@
Required properties: Required properties:
- compatible should contain: - compatible should contain:
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS
* "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577) * "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577)
......
...@@ -19,6 +19,7 @@ Required properties: ...@@ -19,6 +19,7 @@ Required properties:
- "altr,16550-FIFO64" - "altr,16550-FIFO64"
- "altr,16550-FIFO128" - "altr,16550-FIFO128"
- "fsl,16550-FIFO64" - "fsl,16550-FIFO64"
- "fsl,ns16550"
- "serial" if the port type is unknown. - "serial" if the port type is unknown.
- reg : offset and length of the register set for the device. - reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt. - interrupts : should contain uart interrupt.
...@@ -43,6 +44,17 @@ Optional properties: ...@@ -43,6 +44,17 @@ Optional properties:
driver is allowed to detect support for the capability even without this driver is allowed to detect support for the capability even without this
property. property.
Note:
* fsl,ns16550:
------------
Freescale DUART is very similar to the PC16552D (and to a
pair of NS16550A), albeit with some nonstandard behavior such as
erratum A-004737 (relating to incorrect BRK handling).
Represents a single port that is compatible with the DUART found
on many Freescale chips (examples include mpc8349, mpc8548,
mpc8641d, p4080 and ls2085a).
Example: Example:
uart@80230000 { uart@80230000 {
......
* Atmel AC97 controller
Required properties:
- compatible: "atmel,at91sam9263-ac97c"
- reg: Address and length of the register set for the device
- interrupts: Should contain AC97 interrupt
- ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
Optional properties:
- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
Example:
sound@fffa0000 {
compatible = "atmel,at91sam9263-ac97c";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ac97>;
reg = <0xfffa0000 0x4000>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
};
...@@ -12,6 +12,7 @@ adh AD Holdings Plc. ...@@ -12,6 +12,7 @@ adh AD Holdings Plc.
adi Analog Devices, Inc. adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB aeroflexgaisler Aeroflex Gaisler AB
allwinner Allwinner Technology Co., Ltd. allwinner Allwinner Technology Co., Ltd.
alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp. altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC) amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc. amd Advanced Micro Devices (AMD), Inc.
...@@ -34,9 +35,11 @@ capella Capella Microsystems, Inc ...@@ -34,9 +35,11 @@ capella Capella Microsystems, Inc
cavium Cavium, Inc. cavium Cavium, Inc.
cdns Cadence Design Systems Inc. cdns Cadence Design Systems Inc.
chipidea Chipidea, Inc chipidea Chipidea, Inc
chipspark ChipSPARK
chrp Common Hardware Reference Platform chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd. chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc. cirrus Cirrus Logic, Inc.
cloudengines Cloud Engines, Inc.
cnm Chips&Media, Inc. cnm Chips&Media, Inc.
cnxt Conexant Systems, Inc. cnxt Conexant Systems, Inc.
cortina Cortina Systems, Inc. cortina Cortina Systems, Inc.
...@@ -65,6 +68,7 @@ everest Everest Semiconductor Co. Ltd. ...@@ -65,6 +68,7 @@ everest Everest Semiconductor Co. Ltd.
everspin Everspin Technologies, Inc. everspin Everspin Technologies, Inc.
excito Excito excito Excito
fcs Fairchild Semiconductor fcs Fairchild Semiconductor
firefly Firefly
fsl Freescale Semiconductor fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
......
...@@ -21,7 +21,7 @@ Required properties: ...@@ -21,7 +21,7 @@ Required properties:
according to DSI host bindings (see MIPI DSI bindings [1]) according to DSI host bindings (see MIPI DSI bindings [1])
Optional properties: Optional properties:
- samsung,power-domain: a phandle to DSIM power domain node - power-domains: a phandle to DSIM power domain node
Child nodes: Child nodes:
Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
...@@ -53,7 +53,7 @@ Example: ...@@ -53,7 +53,7 @@ Example:
phy-names = "dsim"; phy-names = "dsim";
vddcore-supply = <&vusb_reg>; vddcore-supply = <&vusb_reg>;
vddio-supply = <&vmipi_reg>; vddio-supply = <&vmipi_reg>;
samsung,power-domain = <&pd_lcd0>; power-domains = <&pd_lcd0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
samsung,pll-clock-frequency = <24000000>; samsung,pll-clock-frequency = <24000000>;
......
...@@ -38,7 +38,7 @@ Required properties: ...@@ -38,7 +38,7 @@ Required properties:
property. Must contain "sclk_fimd" and "fimd". property. Must contain "sclk_fimd" and "fimd".
Optional Properties: Optional Properties:
- samsung,power-domain: a phandle to FIMD power domain node. - power-domains: a phandle to FIMD power domain node.
- samsung,invert-vden: video enable signal is inverted - samsung,invert-vden: video enable signal is inverted
- samsung,invert-vclk: video clock signal is inverted - samsung,invert-vclk: video clock signal is inverted
- display-timings: timing settings for FIMD, as described in document [1]. - display-timings: timing settings for FIMD, as described in document [1].
...@@ -97,7 +97,7 @@ SoC specific DT entry: ...@@ -97,7 +97,7 @@ SoC specific DT entry:
interrupts = <11 0>, <11 1>, <11 2>; interrupts = <11 0>, <11 1>, <11 2>;
clocks = <&clock 140>, <&clock 283>; clocks = <&clock 140>, <&clock 283>;
clock-names = "sclk_fimd", "fimd"; clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>; power-domains = <&pd_lcd0>;
status = "disabled"; status = "disabled";
}; };
......
This diff is collapsed.
/*
* Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
*
* Licensed under the X11 license or the GPL v2 (or later)
*/
/dts-v1/;
#include "alphascale-asm9260.dtsi"
/ {
model = "Alphascale asm9260 Development Kit";
compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
};
/*
* Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
*
* Licensed under the X11 license or the GPL v2 (or later)
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/alphascale,asm9260.h>
/ {
interrupt-parent = <&icoll>;
memory {
device_type = "memory";
reg = <0x20000000 0x2000000>;
};
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm926ej-s";
device_type = "cpu";
clocks = <&acc CLKID_SYS_CPU>;
};
};
osc24m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-accuracy = <30000>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
acc: clock-controller@80040000 {
compatible = "alphascale,asm9260-clock-controller";
#clock-cells = <1>;
clocks = <&osc24m>;
reg = <0x80040000 0x204>;
};
icoll: interrupt-controller@80054000 {
compatible = "alphascale,asm9260-icoll";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x80054000 0x200>;
};
timer0: timer@80088000 {
compatible = "alphascale,asm9260-timer";
reg = <0x80088000 0x4000>;
clocks = <&acc CLKID_AHB_TIMER0>;
interrupts = <29>;
};
};
};
...@@ -948,6 +948,22 @@ dcan1: can@481d0000 { ...@@ -948,6 +948,22 @@ dcan1: can@481d0000 {
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled"; status = "disabled";
}; };
vpfe0: vpfe@48326000 {
compatible = "ti,am437x-vpfe";
reg = <0x48326000 0x2000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "vpfe0";
status = "disabled";
};
vpfe1: vpfe@48328000 {
compatible = "ti,am437x-vpfe";
reg = <0x48328000 0x2000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "vpfe1";
status = "disabled";
};
}; };
}; };
......
...@@ -268,6 +268,78 @@ dcan1_default: dcan1_default_pins { ...@@ -268,6 +268,78 @@ dcan1_default: dcan1_default_pins {
0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
>; >;
}; };
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
>;
};
vpfe0_pins_sleep: vpfe0_pins_sleep {
pinctrl-single,pins = <
0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
>;
};
}; };
&i2c0 { &i2c0 {
...@@ -545,3 +617,37 @@ &dcan1 { ...@@ -545,3 +617,37 @@ &dcan1 {
pinctrl-0 = <&dcan1_default>; pinctrl-0 = <&dcan1_default>;
status = "okay"; status = "okay";
}; };
&vpfe0 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&vpfe0_pins_default>;
pinctrl-1 = <&vpfe0_pins_sleep>;
port {
vpfe0_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
&vpfe1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&vpfe1_pins_default>;
pinctrl-1 = <&vpfe1_pins_sleep>;
port {
vpfe1_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
This diff is collapsed.
This diff is collapsed.
...@@ -243,6 +243,42 @@ lcd_pins: lcd_pins { ...@@ -243,6 +243,42 @@ lcd_pins: lcd_pins {
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
>; >;
}; };
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
}; };
matrix_keypad: matrix_keypad@0 { matrix_keypad: matrix_keypad@0 {
...@@ -634,3 +670,20 @@ dpi_out: endpoint@0 { ...@@ -634,3 +670,20 @@ dpi_out: endpoint@0 {
}; };
}; };
}; };
&vpfe1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&vpfe1_pins_default>;
pinctrl-1 = <&vpfe1_pins_sleep>;
port {
vpfe1_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
...@@ -80,6 +80,28 @@ led@3 { ...@@ -80,6 +80,28 @@ led@3 {
default-state = "off"; default-state = "off";
}; };
}; };
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb1_pins>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb2_pins>;
};
}; };
&dra7_pmx_core { &dra7_pmx_core {
...@@ -140,6 +162,86 @@ mmc2_pins_default: mmc2_pins_default { ...@@ -140,6 +162,86 @@ mmc2_pins_default: mmc2_pins_default {
>; >;
}; };
cpsw_pins_default: cpsw_pins_default {
pinctrl-single,pins = <
/* Slave 1 */
0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
/* Slave 2 */
0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
>;
};
cpsw_pins_sleep: cpsw_pins_sleep {
pinctrl-single,pins = <
/* Slave 1 */
0x250 (PIN_INPUT | MUX_MODE15)
0x254 (PIN_INPUT | MUX_MODE15)
0x258 (PIN_INPUT | MUX_MODE15)
0x25c (PIN_INPUT | MUX_MODE15)
0x260 (PIN_INPUT | MUX_MODE15)
0x264 (PIN_INPUT | MUX_MODE15)
0x268 (PIN_INPUT | MUX_MODE15)
0x26c (PIN_INPUT | MUX_MODE15)
0x270 (PIN_INPUT | MUX_MODE15)
0x274 (PIN_INPUT | MUX_MODE15)
0x278 (PIN_INPUT | MUX_MODE15)
0x27c (PIN_INPUT | MUX_MODE15)
/* Slave 2 */
0x198 (PIN_INPUT | MUX_MODE15)
0x19c (PIN_INPUT | MUX_MODE15)
0x1a0 (PIN_INPUT | MUX_MODE15)
0x1a4 (PIN_INPUT | MUX_MODE15)
0x1a8 (PIN_INPUT | MUX_MODE15)
0x1ac (PIN_INPUT | MUX_MODE15)
0x1b0 (PIN_INPUT | MUX_MODE15)
0x1b4 (PIN_INPUT | MUX_MODE15)
0x1b8 (PIN_INPUT | MUX_MODE15)
0x1bc (PIN_INPUT | MUX_MODE15)
0x1c0 (PIN_INPUT | MUX_MODE15)
0x1c4 (PIN_INPUT | MUX_MODE15)
>;
};
davinci_mdio_pins_default: davinci_mdio_pins_default {
pinctrl-single,pins = <
/* MDIO */
0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
>;
};
davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
pinctrl-single,pins = <
0x23c (PIN_INPUT | MUX_MODE15)
0x240 (PIN_INPUT | MUX_MODE15)
>;
};
tps659038_pins_default: tps659038_pins_default { tps659038_pins_default: tps659038_pins_default {
pinctrl-single,pins = < pinctrl-single,pins = <
0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
...@@ -164,6 +266,17 @@ usb1_pins: pinmux_usb1_pins { ...@@ -164,6 +266,17 @@ usb1_pins: pinmux_usb1_pins {
>; >;
}; };
extcon_usb1_pins: extcon_usb1_pins {
pinctrl-single,pins = <
0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
>;
};
extcon_usb2_pins: extcon_usb2_pins {
pinctrl-single,pins = <
0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
>;
};
}; };
&i2c1 { &i2c1 {
...@@ -314,6 +427,12 @@ tps659038_pwr_button: tps659038_pwr_button { ...@@ -314,6 +427,12 @@ tps659038_pwr_button: tps659038_pwr_button {
wakeup-source; wakeup-source;
ti,palmas-long-press-seconds = <12>; ti,palmas-long-press-seconds = <12>;
}; };
tps659038_gpio: tps659038_gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
}; };
tmp102: tmp102@48 { tmp102: tmp102@48 {
...@@ -365,6 +484,32 @@ &uart3 { ...@@ -365,6 +484,32 @@ &uart3 {
pinctrl-0 = <&uart3_pins_default>; pinctrl-0 = <&uart3_pins_default>;
}; };
&mac {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_pins_default>;
pinctrl-1 = <&cpsw_pins_sleep>;
dual_emac;
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;
};
&mmc1 { &mmc1 {
status = "okay"; status = "okay";
...@@ -403,3 +548,15 @@ &usb1 { ...@@ -403,3 +548,15 @@ &usb1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>; pinctrl-0 = <&usb1_pins>;
}; };
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb2 {
dr_mode = "peripheral";
};
...@@ -8,9 +8,43 @@ ...@@ -8,9 +8,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -3,9 +3,43 @@ ...@@ -3,9 +3,43 @@
* *
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -3,10 +3,43 @@ ...@@ -3,10 +3,43 @@
* *
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
* *
* This program is free software; you can redistribute it and/or * This file is dual-licensed: you can use it either under the terms
* modify it under the terms of the GNU General Public License * of the GPL or the X11 license, at your option. Note that this dual
* as published by the Free Software Foundation; either version * licensing only applies to this file, and not this project as a
* 2 of the License, or (at your option) any later version. * whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -3,10 +3,43 @@ ...@@ -3,10 +3,43 @@
* *
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
* *
* This program is free software; you can redistribute it and/or * This file is dual-licensed: you can use it either under the terms
* modify it under the terms of the GNU General Public License * of the GPL or the X11 license, at your option. Note that this dual
* as published by the Free Software Foundation; either version * licensing only applies to this file, and not this project as a
* 2 of the License, or (at your option) any later version. * whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -6,9 +6,43 @@ ...@@ -6,9 +6,43 @@
* *
* Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Note: this Device Tree assumes that the bootloader has remapped the * Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default * internal registers to 0xf1000000 (instead of the default
......
...@@ -3,10 +3,43 @@ ...@@ -3,10 +3,43 @@
* *
* Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
* *
* This program is free software; you can redistribute it and/or * This file is dual-licensed: you can use it either under the terms
* modify it under the terms of the GNU General Public License * of the GPL or the X11 license, at your option. Note that this dual
* as published by the Free Software Foundation; either version * licensing only applies to this file, and not this project as a
* 2 of the License, or (at your option) any later version. * whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Note: this Device Tree assumes that the bootloader has remapped the * Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the old 0xd0000000). * internal registers to 0xf1000000 (instead of the old 0xd0000000).
......
...@@ -8,9 +8,43 @@ ...@@ -8,9 +8,43 @@
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Ben Dooks <ben.dooks@codethink.co.uk> * Ben Dooks <ben.dooks@codethink.co.uk>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* This file contains the definitions that are common to the Armada * This file contains the definitions that are common to the Armada
* 370 and Armada XP SoC. * 370 and Armada XP SoC.
......
...@@ -7,9 +7,43 @@ ...@@ -7,9 +7,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Contains definitions specific to the Armada 370 SoC that are not * Contains definitions specific to the Armada 370 SoC that are not
* common to all Armada SoCs. * common to all Armada SoCs.
......
...@@ -7,9 +7,43 @@ ...@@ -7,9 +7,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -6,9 +6,43 @@ ...@@ -6,9 +6,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
#include "skeleton.dtsi" #include "skeleton.dtsi"
...@@ -63,7 +97,7 @@ cpu@1 { ...@@ -63,7 +97,7 @@ cpu@1 {
}; };
soc { soc {
compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus"; compatible = "marvell,armada375-mbus", "simple-bus";
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
controller = <&mbusc>; controller = <&mbusc>;
......
...@@ -7,9 +7,43 @@ ...@@ -7,9 +7,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
#include "armada-38x.dtsi" #include "armada-38x.dtsi"
...@@ -32,9 +66,8 @@ cpu@0 { ...@@ -32,9 +66,8 @@ cpu@0 {
soc { soc {
internal-regs { internal-regs {
pinctrl { pinctrl@18000 {
compatible = "marvell,mv88f6810-pinctrl"; compatible = "marvell,mv88f6810-pinctrl";
reg = <0x18000 0x20>;
}; };
}; };
......
/*
* Device Tree file for Marvell Armada 385 Access Point Development board
* (DB-88F6820-AP)
*
* Copyright (C) 2014 Marvell
*
* Nadav Haklai <nadavh@marvell.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-385.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Marvell Armada 385 Access Point Development Board";
compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart1;
};
memory {
device_type = "memory";
reg = <0x00000000 0x80000000>; /* 2GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
spi1: spi@10680 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <54000000>;
};
};
i2c0: i2c@11000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
/*
* This bus is wired to two EEPROM
* sockets, one of which holding the
* board ID used by the bootloader.
* Erasing this EEPROM's content will
* brick the board.
* Use this bus with caution.
*/
};
mdio@72004 {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
phy0: ethernet-phy@1 {
reg = <1>;
};
phy1: ethernet-phy@4 {
reg = <4>;
};
phy2: ethernet-phy@6 {
reg = <6>;
};
};
/* UART0 is exposed through the JP8 connector */
uart0: serial@12000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
/*
* UART1 is exposed through a FTDI chip
* wired to the mini-USB connector
*/
uart1: serial@12100 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
};
ethernet@34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
};
ethernet@70000 {
pinctrl-names = "default";
/*
* The Reference Clock 0 is used to
* provide a clock to the PHY
*/
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
};
pcie-controller {
status = "okay";
/*
* The three PCIe units are accessible through
* standard mini-PCIe slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
pcie@3,0 {
/* Port 2, Lane 0 */
status = "okay";
};
};
};
};
...@@ -7,9 +7,43 @@ ...@@ -7,9 +7,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
#include "armada-38x.dtsi" #include "armada-38x.dtsi"
...@@ -37,9 +71,8 @@ cpu@1 { ...@@ -37,9 +71,8 @@ cpu@1 {
soc { soc {
internal-regs { internal-regs {
pinctrl { pinctrl@18000 {
compatible = "marvell,mv88f6820-pinctrl"; compatible = "marvell,mv88f6820-pinctrl";
reg = <0x18000 0x20>;
}; };
}; };
......
/* /*
* Device Tree file for Marvell Armada 385 evaluation board * Device Tree file for Marvell Armada 388 evaluation board
* (DB-88F6820) * (DB-88F6820)
* *
* Copyright (C) 2014 Marvell * Copyright (C) 2014 Marvell
* *
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
#include "armada-385.dtsi" #include "armada-388.dtsi"
/ { / {
model = "Marvell Armada 385 Development Board"; model = "Marvell Armada 385 Development Board";
compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; compatible = "marvell,a385-db", "marvell,armada388",
"marvell,armada385", "marvell,armada380";
chosen { chosen {
bootargs = "console=ttyS0,115200 earlyprintk"; bootargs = "console=ttyS0,115200 earlyprintk";
...@@ -74,7 +109,7 @@ ethernet@70000 { ...@@ -74,7 +109,7 @@ ethernet@70000 {
phy-mode = "rgmii-id"; phy-mode = "rgmii-id";
}; };
mdio { mdio@72004 {
phy0: ethernet-phy@0 { phy0: ethernet-phy@0 {
reg = <0>; reg = <0>;
}; };
......
This diff is collapsed.
/* /*
* Device Tree file for Marvell Armada 385 Reference Design board * Device Tree file for Marvell Armada 388 Reference Design board
* (RD-88F6820-AP) * (RD-88F6820-AP)
* *
* Copyright (C) 2014 Marvell * Copyright (C) 2014 Marvell
...@@ -7,17 +7,52 @@ ...@@ -7,17 +7,52 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
#include "armada-385.dtsi" #include "armada-388.dtsi"
/ { / {
model = "Marvell Armada 385 Reference Design"; model = "Marvell Armada 385 Reference Design";
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; compatible = "marvell,a385-rd", "marvell,armada388",
"marvell,armada385","marvell,armada380";
chosen { chosen {
bootargs = "console=ttyS0,115200 earlyprintk"; bootargs = "console=ttyS0,115200 earlyprintk";
...@@ -67,7 +102,7 @@ ethernet@70000 { ...@@ -67,7 +102,7 @@ ethernet@70000 {
}; };
mdio { mdio@72004 {
phy0: ethernet-phy@0 { phy0: ethernet-phy@0 {
reg = <0>; reg = <0>;
}; };
......
/*
* Device Tree Include file for Marvell Armada 388 SoC.
*
* Copyright (C) 2015 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
*
* The main difference with the Armada 385 is that the 388 can handle two more
* SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
* property and the name of the SoC, and add the second SATA host which control
* the 2 other ports.
*/
#include "armada-385.dtsi"
/ {
model = "Marvell Armada 388 family SoC";
compatible = "marvell,armada388", "marvell,armada385",
"marvell,armada380";
soc {
internal-regs {
pinctrl@18000 {
compatible = "marvell,mv88f6828-pinctrl";
};
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 30>;
status = "disabled";
};
};
};
};
...@@ -7,9 +7,43 @@ ...@@ -7,9 +7,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
#include "skeleton.dtsi" #include "skeleton.dtsi"
...@@ -31,8 +65,7 @@ aliases { ...@@ -31,8 +65,7 @@ aliases {
}; };
soc { soc {
compatible = "marvell,armada380-mbus", "marvell,armada370-mbus", compatible = "marvell,armada380-mbus", "simple-bus";
"simple-bus";
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
controller = <&mbusc>; controller = <&mbusc>;
...@@ -173,7 +206,7 @@ i2c1: i2c@11100 { ...@@ -173,7 +206,7 @@ i2c1: i2c@11100 {
status = "disabled"; status = "disabled";
}; };
serial@12000 { uart0: serial@12000 {
compatible = "snps,dw-apb-uart"; compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>; reg = <0x12000 0x100>;
reg-shift = <2>; reg-shift = <2>;
...@@ -193,9 +226,94 @@ serial@12100 { ...@@ -193,9 +226,94 @@ serial@12100 {
status = "disabled"; status = "disabled";
}; };
pinctrl { pinctrl: pinctrl@18000 {
compatible = "marvell,mv88f6820-pinctrl";
reg = <0x18000 0x20>; reg = <0x18000 0x20>;
ge0_rgmii_pins: ge-rgmii-pins-0 {
marvell,pins = "mpp6", "mpp7", "mpp8",
"mpp9", "mpp10", "mpp11",
"mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
marvell,function = "ge0";
};
ge1_rgmii_pins: ge-rgmii-pins-1 {
marvell,pins = "mpp21", "mpp27", "mpp28",
"mpp29", "mpp30", "mpp31",
"mpp32", "mpp37", "mpp38",
"mpp39", "mpp40", "mpp41";
marvell,function = "ge1";
};
i2c0_pins: i2c-pins-0 {
marvell,pins = "mpp2", "mpp3";
marvell,function = "i2c0";
};
mdio_pins: mdio-pins {
marvell,pins = "mpp4", "mpp5";
marvell,function = "ge";
};
ref_clk0_pins: ref-clk-pins-0 {
marvell,pins = "mpp45";
marvell,function = "ref";
};
ref_clk1_pins: ref-clk-pins-1 {
marvell,pins = "mpp46";
marvell,function = "ref";
};
spi0_pins: spi-pins-0 {
marvell,pins = "mpp22", "mpp23", "mpp24",
"mpp25";
marvell,function = "spi0";
};
spi1_pins: spi-pins-1 {
marvell,pins = "mpp56", "mpp57", "mpp58",
"mpp59";
marvell,function = "spi1";
};
uart0_pins: uart-pins-0 {
marvell,pins = "mpp0", "mpp1";
marvell,function = "ua0";
};
uart1_pins: uart-pins-1 {
marvell,pins = "mpp19", "mpp20";
marvell,function = "ua1";
};
sdhci_pins: sdhci-pins {
marvell,pins = "mpp48", "mpp49", "mpp50",
"mpp52", "mpp53", "mpp54",
"mpp55", "mpp57", "mpp58",
"mpp59";
marvell,function = "sd0";
};
sata0_pins: sata-pins-0 {
marvell,pins = "mpp20";
marvell,function = "sata0";
};
sata1_pins: sata-pins-1 {
marvell,pins = "mpp19";
marvell,function = "sata1";
};
sata2_pins: sata-pins-2 {
marvell,pins = "mpp47";
marvell,function = "sata2";
};
sata3_pins: sata-pins-3 {
marvell,pins = "mpp44";
marvell,function = "sata3";
};
}; };
gpio0: gpio@18100 { gpio0: gpio@18100 {
...@@ -373,7 +491,7 @@ eth0: ethernet@70000 { ...@@ -373,7 +491,7 @@ eth0: ethernet@70000 {
status = "disabled"; status = "disabled";
}; };
mdio { mdio@72004 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "marvell,orion-mdio"; compatible = "marvell,orion-mdio";
......
...@@ -3,16 +3,50 @@ ...@@ -3,16 +3,50 @@
* *
* Note: this board is shipped with a new generation boot loader that * Note: this board is shipped with a new generation boot loader that
* remaps internal registers at 0xf1000000. Therefore, if earlyprintk * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
* is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
* used. * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
* *
* Copyright (C) 2013 Marvell * Copyright (C) 2013 Marvell
* *
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
...@@ -60,10 +94,12 @@ pcie@3,0 { ...@@ -60,10 +94,12 @@ pcie@3,0 {
}; };
internal-regs { internal-regs {
/* UART0 */
serial@12000 { serial@12000 {
status = "okay"; status = "okay";
}; };
/* UART1 */
serial@12100 { serial@12100 {
status = "okay"; status = "okay";
}; };
......
...@@ -8,9 +8,43 @@ ...@@ -8,9 +8,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Note: this Device Tree assumes that the bootloader has remapped the * Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default * internal registers to 0xf1000000 (instead of the default
......
...@@ -8,9 +8,43 @@ ...@@ -8,9 +8,43 @@
* Gregory CLEMENT <gregory.clement@free-electrons.com> * Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Note: this Device Tree assumes that the bootloader has remapped the * Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default * internal registers to 0xf1000000 (instead of the default
......
...@@ -3,10 +3,43 @@ ...@@ -3,10 +3,43 @@
* *
* Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
* *
* This program is free software; you can redistribute it and/or * This file is dual-licensed: you can use it either under the terms
* modify it under the terms of the GNU General Public License * of the GPL or the X11 license, at your option. Note that this dual
* as published by the Free Software Foundation; either version * licensing only applies to this file, and not this project as a
* 2 of the License, or (at your option) any later version. * whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -5,9 +5,43 @@ ...@@ -5,9 +5,43 @@
* *
* Lior Amsalem <alior@marvell.com> * Lior Amsalem <alior@marvell.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -5,9 +5,43 @@ ...@@ -5,9 +5,43 @@
* *
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Contains definitions specific to the Armada XP MV78230 SoC that are not * Contains definitions specific to the Armada XP MV78230 SoC that are not
* common to all Armada XP SoCs. * common to all Armada XP SoCs.
......
...@@ -5,9 +5,43 @@ ...@@ -5,9 +5,43 @@
* *
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Contains definitions specific to the Armada XP MV78260 SoC that are not * Contains definitions specific to the Armada XP MV78260 SoC that are not
* common to all Armada XP SoCs. * common to all Armada XP SoCs.
......
...@@ -5,9 +5,43 @@ ...@@ -5,9 +5,43 @@
* *
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Contains definitions specific to the Armada XP MV78460 SoC that are not * Contains definitions specific to the Armada XP MV78460 SoC that are not
* common to all Armada XP SoCs. * common to all Armada XP SoCs.
......
...@@ -3,10 +3,43 @@ ...@@ -3,10 +3,43 @@
* *
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
* *
* This program is free software; you can redistribute it and/or * This file is dual-licensed: you can use it either under the terms
* modify it under the terms of the GNU General Public License * of the GPL or the X11 license, at your option. Note that this dual
* as published by the Free Software Foundation; either version * licensing only applies to this file, and not this project as a
* 2 of the License, or (at your option) any later version. * whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -5,9 +5,43 @@ ...@@ -5,9 +5,43 @@
* *
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/ */
/dts-v1/; /dts-v1/;
......
...@@ -3,10 +3,43 @@ ...@@ -3,10 +3,43 @@
* *
* Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
* *
* This program is free software; you can redistribute it and/or * This file is dual-licensed: you can use it either under the terms
* modify it under the terms of the GNU General Public License * of the GPL or the X11 license, at your option. Note that this dual
* as published by the Free Software Foundation; either version * licensing only applies to this file, and not this project as a
* 2 of the License, or (at your option) any later version. * whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Note: this Device Tree assumes that the bootloader has remapped the * Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the old 0xd0000000). * internal registers to 0xf1000000 (instead of the old 0xd0000000).
......
...@@ -8,9 +8,43 @@ ...@@ -8,9 +8,43 @@
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Ben Dooks <ben.dooks@codethink.co.uk> * Ben Dooks <ben.dooks@codethink.co.uk>
* *
* This file is licensed under the terms of the GNU General Public * This file is dual-licensed: you can use it either under the terms
* License version 2. This program is licensed "as is" without any * of the GPL or the X11 license, at your option. Note that this dual
* warranty of any kind, whether express or implied. * licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* *
* Contains definitions specific to the Armada XP SoC that are not * Contains definitions specific to the Armada XP SoC that are not
* common to all Armada SoCs. * common to all Armada SoCs.
......
...@@ -695,6 +695,16 @@ pinctrl_can_rx_tx: can_rx_tx { ...@@ -695,6 +695,16 @@ pinctrl_can_rx_tx: can_rx_tx {
}; };
}; };
ac97 {
pinctrl_ac97: ac97-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */
};
};
pioA: gpio@fffff200 { pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio"; compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>; reg = <0xfffff200 0x200>;
...@@ -823,6 +833,17 @@ ssc1: ssc@fff9c000 { ...@@ -823,6 +833,17 @@ ssc1: ssc@fff9c000 {
status = "disabled"; status = "disabled";
}; };
ac97: sound@fffa0000 {
compatible = "atmel,at91sam9263-ac97c";
reg = <0xfffa0000 0x4000>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ac97>;
clocks = <&ac97_clk>;
clock-names = "ac97_clk";
status = "disabled";
};
macb0: ethernet@fffbc000 { macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb"; compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>; reg = <0xfffbc000 0x100>;
......
...@@ -54,7 +54,7 @@ i2c0: i2c@f8010000 { ...@@ -54,7 +54,7 @@ i2c0: i2c@f8010000 {
status = "okay"; status = "okay";
wm8904: codec@1a { wm8904: codec@1a {
compatible = "wm8904"; compatible = "wlf,wm8904";
reg = <0x1a>; reg = <0x1a>;
clocks = <&pck0>; clocks = <&pck0>;
clock-names = "mclk"; clock-names = "mclk";
......
...@@ -53,6 +53,8 @@ usart0: serial@f801c000 { ...@@ -53,6 +53,8 @@ usart0: serial@f801c000 {
}; };
usb2: gadget@f803c000 { usb2: gadget@f803c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_board_usb2>;
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -80,6 +82,13 @@ pinctrl_board_mmc1: mmc1-board { ...@@ -80,6 +82,13 @@ pinctrl_board_mmc1: mmc1-board {
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
}; };
}; };
usb2 {
pinctrl_board_usb2: usb2-board {
atmel,pins =
<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
};
};
}; };
spi0: spi@f0000000 { spi0: spi@f0000000 {
......
/*
* DTS file for CSR SiRFatlas7 Evaluation Board
*
* Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "atlas7.dtsi"
/ {
model = "CSR SiRFatlas7 Evaluation Board";
compatible = "sirf,atlas7-cb", "sirf,atlas7";
chosen {
bootargs = "console=ttySiRF1,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
vpp_reserved: vpp_mem@5e800000 {
compatible = "sirf,reserved-memory";
reg = <0x5e800000 0x800000>;
};
nanddisk_reserved: nanddisk@46000000 {
reg = <0x46000000 0x200000>;
no-map;
};
};
noc {
mediam {
nand@17050000 {
memory-region = <&nanddisk_reserved>;
};
};
gnssm {
spi1: spi@18200000 {
status = "okay";
spiflash: macronix@0{
status = "okay";
compatible = "macronix,mx25l6405d";
reg = <0>;
spi-max-frequency = <37500000>;
spi-cpha;
spi-cpol;
#address-cells = <1>;
#size-cells = <1>;
partitions@0 {
label = "myspiboot";
reg = <0x0 0x800000>;
};
};
};
};
btm {
uart6: uart@11000000 {
status = "okay";
sirf,uart-has-rtscts;
};
};
disp-iobg {
vpp@13110000 {
memory-region = <&vpp_reserved>;
};
};
display0: display@0 {
compatible = "lvds-panel";
source = "lvds.0";
bl-gpios = <&gpio_1 63 0>;
data-lines = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <60000000>;
hactive = <1024>;
vactive = <600>;
hfront-porch = <220>;
hback-porch = <100>;
hsync-len = <1>;
vback-porch = <10>;
vfront-porch = <25>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
};
This diff is collapsed.
/*
* Copyright 2015 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* AXP202/209 Integrated Power Management Chip
* http://www.x-powers.com/product/AXP20X.php
* http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
*/
&axp209 {
compatible = "x-powers,axp209";
interrupt-controller;
#interrupt-cells = <1>;
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <1500>;
reg_dcdc2: dcdc2 {
regulator-name = "dcdc2";
};
reg_dcdc3: dcdc3 {
regulator-name = "dcdc3";
};
reg_ldo1: ldo1 {
/* LDO1 is a fixed output regulator */
regulator-always-on;
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-name = "ldo1";
};
reg_ldo2: ldo2 {
regulator-name = "ldo2";
};
reg_ldo3: ldo3 {
regulator-name = "ldo3";
};
reg_ldo4: ldo4 {
regulator-name = "ldo4";
};
reg_ldo5: ldo5 {
regulator-name = "ldo5";
};
};
};
...@@ -23,11 +23,77 @@ memory { ...@@ -23,11 +23,77 @@ memory {
reg = <0x00000000 0x08000000>; reg = <0x00000000 0x08000000>;
}; };
spi {
compatible = "spi-gpio";
num-chipselects = <1>;
gpio-sck = <&chipcommon 7 0>;
gpio-mosi = <&chipcommon 4 0>;
cs-gpios = <&chipcommon 6 0>;
#address-cells = <1>;
#size-cells = <0>;
hc595: gpio_spi@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
};
};
leds {
compatible = "gpio-leds";
power0 {
label = "bcm53xx:red:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power1 {
label = "bcm53xx:white:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
router0 {
label = "bcm53xx:blue:router";
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wan {
label = "bcm53xx:blue:wan";
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
wireless0 {
label = "bcm53xx:blue:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
poll-interval = <200>;
restart { restart {
label = "Reset"; label = "Reset";
......
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Luxul XWC-1000
*
* Copyright 2014 Luxul Inc.
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
#include "bcm4708.dtsi"
/ {
compatible = "luxul,xwc-1000", "brcm,bcm4708";
model = "Luxul XWC-1000 (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
};
memory {
reg = <0x00000000 0x08000000>;
};
axi@18000000 {
nand@28000 {
reg = <0x00028000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};
};
leds {
compatible = "gpio-leds";
status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
};
};
...@@ -71,7 +71,6 @@ gpio-keys { ...@@ -71,7 +71,6 @@ gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
poll-interval = <200>;
wps { wps {
label = "WPS"; label = "WPS";
......
...@@ -61,7 +61,6 @@ gpio-keys { ...@@ -61,7 +61,6 @@ gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
poll-interval = <200>;
wps { wps {
label = "WPS"; label = "WPS";
......
...@@ -61,7 +61,6 @@ gpio-keys { ...@@ -61,7 +61,6 @@ gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
poll-interval = <200>;
restart { restart {
label = "Reset"; label = "Reset";
......
...@@ -23,11 +23,77 @@ memory { ...@@ -23,11 +23,77 @@ memory {
reg = <0x00000000 0x08000000>; reg = <0x00000000 0x08000000>;
}; };
spi {
compatible = "spi-gpio";
num-chipselects = <1>;
gpio-sck = <&chipcommon 7 0>;
gpio-mosi = <&chipcommon 4 0>;
cs-gpios = <&chipcommon 6 0>;
#address-cells = <1>;
#size-cells = <0>;
hc595: gpio_spi@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
};
};
leds {
compatible = "gpio-leds";
power0 {
label = "bcm53xx:green:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
power1 {
label = "bcm53xx:red:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
router0 {
label = "bcm53xx:green:router";
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wan {
label = "bcm53xx:green:wan";
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
wireless0 {
label = "bcm53xx:green:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
poll-interval = <200>;
aoss { aoss {
label = "AOSS"; label = "AOSS";
......
This diff is collapsed.
...@@ -104,7 +104,7 @@ gic: interrupt-controller@ad1000 { ...@@ -104,7 +104,7 @@ gic: interrupt-controller@ad1000 {
local-timer@ad0600 { local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer"; compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>; reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&chip CLKID_TWD>; clocks = <&chip CLKID_TWD>;
}; };
......
...@@ -45,6 +45,11 @@ soc { ...@@ -45,6 +45,11 @@ soc {
ranges = <0 0xf7000000 0x1000000>; ranges = <0 0xf7000000 0x1000000>;
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
};
sdhci0: sdhci@ab0000 { sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc"; compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>; reg = <0xab0000 0x200>;
...@@ -71,7 +76,7 @@ gic: interrupt-controller@ad1000 { ...@@ -71,7 +76,7 @@ gic: interrupt-controller@ad1000 {
local-timer@ad0600 { local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer"; compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>; reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&chip CLKID_TWD>; clocks = <&chip CLKID_TWD>;
}; };
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment