Merge tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Texas Instruments TPS23861 driver
   - AHT10 Temperature and Humidity Sensor Driver

  Support for new chips/variants to existing drivers:
   - Add AMD family 19h model 30h x86 match to amd_energy driver
   - Add Zen3 Ryzen Desktop CPUs support to k10temp driver
   - Add support for MAX16508 to max16601 driver
   - Support revision "B" of max31785
   - Add support for ASRock boards to nct6683 driver

  Driver removals:
   - Decomission abx500 driver

  Various other minor fixes and improvements"

* tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
  MAINTAINERS: Add entry for Texas Instruments TPS23861 PoE PSE
  hwmon: add Texas Instruments TPS23861 driver
  dt-bindings: hwmon: Add TI TPS23861 bindings
  hwmon: (da9052) Switch to using the new API kobj_to_dev()
  hwmon: (amd_energy) Add AMD family 19h model 30h x86 match
  hwmon: (pmbus/max31785) Support revision "B"
  hwmon: (pmbus/lm25066) Remove unnecessary pmbus_clear_cache function call
  hwmon: (pmbus) Clear sensor data after chip write
  hwmon: (pmbus/max16601) Add support for MAX16508
  hwmon: (pmbus/max16601) Determine and use number of populated phases
  hwmon: (pmbus) Simplify the calculation of variables
  hwmon: (aht10) Unlock on error in aht10_read_values()
  hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups
  hwmon: Add AHT10 Temperature and Humidity Sensor Driver
  hwmon: (applesmc) Assign boolean values to a bool variable
  hwmon: (nct6683) Support ASRock boards
  hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev()
  hwmon: (max6650) Switch to using the new API kobj_to_dev()
  hwmon: (pwm-fan) Support multiple fan tachometers
  hwmon: (pwm-fan) Store tach data separately
  ...

Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,tps23861.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS23861 PoE PSE
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  The TPS23861 is a IEEE 802.3at Quad Port Power-over-Ethernet PSE Controller.
+
+  Datasheets:
+  https://www.ti.com/lit/gpn/tps23861
+
+
+properties:
+  compatible:
+    enum:
+      - ti,tps23861
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: The value of curent sense resistor in microohms.
+    default: 255000
+    minimum: 250000
+    maximum: 255000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          tps23861@30 {
+              compatible = "ti,tps23861";
+              reg = <0x30>;
+              shunt-resistor-micro-ohms = <255000>;
+          };
+    };

Documentation/hwmon/ab8500.rst

-Kernel driver ab8500
-====================
-
-Supported chips:
-
-  * ST-Ericsson AB8500
-
-    Prefix: 'ab8500'
-
-    Addresses scanned: -
-
-    Datasheet: http://www.stericsson.com/developers/documentation.jsp
-
-Authors:
-	- Martin Persson <martin.persson@stericsson.com>
-	- Hongbo Zhang <hongbo.zhang@linaro.org>
-
-Description
------------
-
-See also Documentation/hwmon/abx500.rst. This is the ST-Ericsson AB8500 specific
-driver.
-
-Currently only the AB8500 internal sensor and one external sensor for battery
-temperature are monitored. Other GPADC channels can also be monitored if needed
-in future.

Documentation/hwmon/abx500.rst

-Kernel driver abx500
-====================
-
-Supported chips:
-
-  * ST-Ericsson ABx500 series
-
-    Prefix: 'abx500'
-
-    Addresses scanned: -
-
-    Datasheet: http://www.stericsson.com/developers/documentation.jsp
-
-Authors:
-	Martin Persson <martin.persson@stericsson.com>
-	Hongbo Zhang <hongbo.zhang@linaro.org>
-
-Description
------------
-
-Every ST-Ericsson Ux500 SOC consists of both ABx500 and DBx500 physically,
-this is kernel hwmon driver for ABx500.
-
-There are some GPADCs inside ABx500 which are designed for connecting to
-thermal sensors, and there is also a thermal sensor inside ABx500 too, which
-raises interrupt when critical temperature reached.
-
-This abx500 is a common layer which can monitor all of the sensors, every
-specific abx500 chip has its special configurations in its own file, e.g. some
-sensors can be configured invisible if they are not available on that chip, and
-the corresponding gpadc_addr should be set to 0, thus this sensor won't be
-polled.

Documentation/hwmon/aht10.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver aht10
+=====================
+
+Supported chips:
+
+  * Aosong AHT10
+
+    Prefix: 'aht10'
+
+    Addresses scanned: None
+
+    Datasheet:
+
+      Chinese: http://www.aosong.com/userfiles/files/media/AHT10%E4%BA%A7%E5%93%81%E6%89%8B%E5%86%8C%20A3%2020201210.pdf
+      English: https://server4.eca.ir/eshop/AHT10/Aosong_AHT10_en_draft_0c.pdf
+
+Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
+
+
+Description
+-----------
+
+The AHT10 is a Temperature and Humidity sensor
+
+The address of this i2c device may only be 0x38
+
+Usage Notes
+-----------
+
+This driver does not probe for AHT10 devices, as there is no reliable
+way to determine if an i2c chip is or isn't an AHT10. The device has
+to be instantiated explicitly with the address 0x38. See
+Documentation/i2c/instantiating-devices.rst for details.
+
+Sysfs entries
+-------------
+
+=============== ============================================
+temp1_input     Measured temperature in millidegrees Celcius
+humidity1_input Measured humidity in %H
+update_interval The minimum interval for polling the sensor,
+                in milliseconds. Writable. Must be at
+                least 2000.
+=============== ============================================

Documentation/hwmon/ina2xx.rst

@@ -74,7 +74,7 @@ bus supply voltage.
 
 The shunt value in micro-ohms can be set via platform data or device tree at
 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
-refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
 if the device tree is used.
 
 Additionally ina226 supports update_interval attribute as described in

Documentation/hwmon/index.rst

@@ -18,10 +18,8 @@ Hardware Monitoring Kernel Drivers
 .. toctree::
    :maxdepth: 1
 
-   ab8500
    abituguru
    abituguru3
-   abx500
    acpi_power_meter
    ad7314
    adc128d818
@@ -39,6 +37,7 @@ Hardware Monitoring Kernel Drivers
    adt7462
    adt7470
    adt7475
+   aht10
    amc6821
    amd_energy
    asb100
@@ -178,6 +177,7 @@ Hardware Monitoring Kernel Drivers
    tmp401
    tmp421
    tmp513
+   tps23861
    tps40422
    tps53679
    twl4030-madc-hwmon

Documentation/hwmon/max16601.rst

@@ -5,6 +5,14 @@ Kernel driver max16601
 
 Supported chips:
 
+  * Maxim MAX16508
+
+    Prefix: 'max16508'
+
+    Addresses scanned: -
+
+    Datasheet: Not published
+
   * Maxim MAX16601
 
     Prefix: 'max16601'
@@ -19,8 +27,8 @@ Author: Guenter Roeck <linux@roeck-us.net>
 Description
 -----------
 
-This driver supports the MAX16601 VR13.HC Dual-Output Voltage Regulator
-Chipset.
+This driver supports the MAX16508 VR13 Dual-Output Voltage Regulator
+as well as the MAX16601 VR13.HC Dual-Output Voltage Regulator chipsets.
 
 The driver is a client driver to the core PMBus driver.
 Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -45,7 +53,7 @@ Sysfs entries
 
 The following attributes are supported.
 
-======================= =======================================================
+=============================== ===============================================
 in1_label			"vin1"
 in1_input			VCORE input voltage.
 in1_alarm			Input voltage alarm.
@@ -55,83 +63,44 @@ in2_input		VCORE output voltage.
 in2_alarm			Output voltage alarm.
 
 curr1_label			"iin1"
-curr1_input		VCORE input current, derived from duty cycle and output
-			current.
+curr1_input			VCORE input current, derived from duty cycle
+				and output current.
 curr1_max			Maximum input current.
 curr1_max_alarm			Current high alarm.
 
-curr2_label		"iin1.0"
-curr2_input		VCORE phase 0 input current.
-
-curr3_label		"iin1.1"
-curr3_input		VCORE phase 1 input current.
-
-curr4_label		"iin1.2"
-curr4_input		VCORE phase 2 input current.
-
-curr5_label		"iin1.3"
-curr5_input		VCORE phase 3 input current.
-
-curr6_label		"iin1.4"
-curr6_input		VCORE phase 4 input current.
+curr[P+2]_label			"iin1.P"
+curr[P+2]_input			VCORE phase P input current.
 
-curr7_label		"iin1.5"
-curr7_input		VCORE phase 5 input current.
+curr[N+2]_label			"iin2"
+curr[N+2]_input			VCORE input current, derived from sensor
+				element.
+				'N' is the number of enabled/populated phases.
 
-curr8_label		"iin1.6"
-curr8_input		VCORE phase 6 input current.
+curr[N+3]_label			"iin3"
+curr[N+3]_input			VSA input current.
 
-curr9_label		"iin1.7"
-curr9_input		VCORE phase 7 input current.
+curr[N+4]_label			"iout1"
+curr[N+4]_input			VCORE output current.
+curr[N+4]_crit			Critical output current.
+curr[N+4]_crit_alarm		Output current critical alarm.
+curr[N+4]_max			Maximum output current.
+curr[N+4]_max_alarm		Output current high alarm.
 
-curr10_label		"iin2"
-curr10_input		VCORE input current, derived from sensor element.
+curr[N+P+5]_label		"iout1.P"
+curr[N+P+5]_input		VCORE phase P output current.
 
-curr11_label		"iin3"
-curr11_input		VSA input current.
-
-curr12_label		"iout1"
-curr12_input		VCORE output current.
-curr12_crit		Critical output current.
-curr12_crit_alarm	Output current critical alarm.
-curr12_max		Maximum output current.
-curr12_max_alarm	Output current high alarm.
-
-curr13_label		"iout1.0"
-curr13_input		VCORE phase 0 output current.
-
-curr14_label		"iout1.1"
-curr14_input		VCORE phase 1 output current.
-
-curr15_label		"iout1.2"
-curr15_input		VCORE phase 2 output current.
-
-curr16_label		"iout1.3"
-curr16_input		VCORE phase 3 output current.
-
-curr17_label		"iout1.4"
-curr17_input		VCORE phase 4 output current.
-
-curr18_label		"iout1.5"
-curr18_input		VCORE phase 5 output current.
-
-curr19_label		"iout1.6"
-curr19_input		VCORE phase 6 output current.
-
-curr20_label		"iout1.7"
-curr20_input		VCORE phase 7 output current.
-
-curr21_label		"iout3"
-curr21_input		VSA output current.
-curr21_highest		Historical maximum VSA output current.
-curr21_reset_history	Write any value to reset curr21_highest.
-curr21_crit		Critical output current.
-curr21_crit_alarm	Output current critical alarm.
-curr21_max		Maximum output current.
-curr21_max_alarm	Output current high alarm.
+curr[2*N+5]_label		"iout3"
+curr[2*N+5]_input		VSA output current.
+curr[2*N+5]_highest		Historical maximum VSA output current.
+curr[2*N+5]_reset_history	Write any value to reset curr21_highest.
+curr[2*N+5]_crit		Critical output current.
+curr[2*N+5]_crit_alarm		Output current critical alarm.
+curr[2*N+5]_max			Maximum output current.
+curr[2*N+5]_max_alarm		Output current high alarm.
 
 power1_label			"pin1"
-power1_input		Input power, derived from duty cycle and output current.
+power1_input			Input power, derived from duty cycle and output
+				current.
 power1_alarm			Input power alarm.
 
 power2_label			"pin2"
@@ -156,4 +125,4 @@ temp6_crit		Critical high temperature.
 temp6_crit_alarm		Chip temperature critical high alarm.
 temp6_max			Maximum temperature.
 temp6_max_alarm			Chip temperature high alarm.
-======================= =======================================================
+=============================== ===============================================

Documentation/hwmon/nct6683.rst

@@ -61,5 +61,6 @@ Board		Firmware version
 Intel DH87RL	NCT6683D EC firmware version 1.0 build 04/03/13
 Intel DH87MC	NCT6683D EC firmware version 1.0 build 04/03/13
 Intel DB85FL	NCT6683D EC firmware version 1.0 build 04/03/13
+ASRock X570	NCT6683D EC firmware version 1.0 build 06/28/19
 MSI B550	NCT6687D EC firmware version 1.0 build 05/07/20
 =============== ===============================================

Documentation/hwmon/tps23861.rst

+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver tps23861
+======================
+
+Supported chips:
+  * Texas Instruments TPS23861
+
+    Prefix: 'tps23861'
+
+    Datasheet: https://www.ti.com/lit/gpn/tps23861
+
+Author: Robert Marko <robert.marko@sartura.hr>
+
+Description
+-----------
+
+This driver supports hardware monitoring for Texas Instruments TPS23861 PoE PSE.
+
+TPS23861 is a quad port IEEE802.3at PSE controller with optional I2C control
+and monitoring capabilities.
+
+TPS23861 offers three modes of operation: Auto, Semi-Auto and Manual.
+
+This driver only supports the Auto mode of operation providing monitoring
+as well as enabling/disabling the four ports.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in[0-3]_input		Voltage on ports [1-4]
+in[0-3]_label		"Port[1-4]"
+in4_input		IC input voltage
+in4_label		"Input"
+temp1_input		IC die temperature
+temp1_label		"Die"
+curr[1-4]_input		Current on ports [1-4]
+in[1-4]_label		"Port[1-4]"
+in[0-3]_enable		Enable/disable ports [1-4]
+======================= =====================================================================

MAINTAINERS

@@ -17620,6 +17620,15 @@ F:	include/dt-bindings/soc/ti,sci_pm_domain.h
 F:	include/linux/soc/ti/ti_sci_inta_msi.h
 F:	include/linux/soc/ti/ti_sci_protocol.h
 
+TEXAS INSTRUMENTS TPS23861 PoE PSE DRIVER
+M:	Robert Marko <robert.marko@sartura.hr>
+M:	Luka Perkov <luka.perkov@sartura.hr>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+F:	Documentation/hwmon/tps23861.rst
+F:	drivers/hwmon/tps23861.c
+
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org

drivers/hwmon/Kconfig

@@ -38,19 +38,6 @@ config HWMON_DEBUG_CHIP
 
 comment "Native drivers"
 
-config SENSORS_AB8500
-	tristate "AB8500 thermal monitoring"
-	depends on AB8500_GPADC && AB8500_BM && (IIO = y)
-	default n
-	help
-	  If you say yes here you get support for the thermal sensor part
-	  of the AB8500 chip. The driver includes thermal management for
-	  AB8500 die and two GPADC channels. The GPADC channel are preferably
-	  used to access sensors outside the AB8500 chip.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called abx500-temp.
-
 config SENSORS_ABITUGURU
 	tristate "Abit uGuru (rev 1 & 2)"
 	depends on X86 && DMI
@@ -257,6 +244,16 @@ config SENSORS_ADT7475
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7475.
 
+config SENSORS_AHT10
+	tristate "Aosong AHT10"
+	depends on I2C
+	help
+	  If you say yes here, you get support for the Aosong AHT10
+	  temperature and humidity sensors
+
+	  This driver can also be built as a module. If so, the module
+	  will be called aht10.
+
 config SENSORS_AS370
 	tristate "Synaptics AS370 SoC hardware monitoring driver"
 	help
@@ -1136,6 +1133,17 @@ config SENSORS_TC654
 	  This driver can also be built as a module. If so, the module
 	  will be called tc654.
 
+config SENSORS_TPS23861
+	tristate "Texas Instruments TPS23861 PoE PSE"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for Texas Instruments
+	  TPS23861 802.3at PoE PSE chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called tps23861.
+
 config SENSORS_MENF21BMC_HWMON
 	tristate "MEN 14F021P00 BMC Hardware Monitoring"
 	depends on MFD_MENF21BMC

drivers/hwmon/Makefile

@@ -21,7 +21,6 @@ obj-$(CONFIG_SENSORS_W83795)	+= w83795.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
-obj-$(CONFIG_SENSORS_AB8500)	+= abx500.o ab8500.o
 obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
 obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
 obj-$(CONFIG_SENSORS_AD7314)	+= ad7314.o
@@ -45,6 +44,7 @@ obj-$(CONFIG_SENSORS_ADT7411)	+= adt7411.o
 obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
+obj-$(CONFIG_SENSORS_AHT10)	+= aht10.o
 obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_ARM_SCMI)	+= scmi-hwmon.o
@@ -144,6 +144,7 @@ obj-$(CONFIG_SENSORS_MAX31790)	+= max31790.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
 obj-$(CONFIG_SENSORS_TC654)	+= tc654.o
+obj-$(CONFIG_SENSORS_TPS23861)	+= tps23861.o
 obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
 obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
 obj-$(CONFIG_SENSORS_MR75203)	+= mr75203.o

drivers/hwmon/ab8500.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson 2010 - 2013
- * Author: Martin Persson <martin.persson@stericsson.com>
- *         Hongbo Zhang <hongbo.zhang@linaro.org>
- *
- * When the AB8500 thermal warning temperature is reached (threshold cannot
- * be changed by SW), an interrupt is set, and if no further action is taken
- * within a certain time frame, kernel_power_off will be called.
- *
- * When AB8500 thermal shutdown temperature is reached a hardware shutdown of
- * the AB8500 will occur.
- */
-
-#include <linux/err.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/power/ab8500.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/iio/consumer.h>
-#include "abx500.h"
-
-#define DEFAULT_POWER_OFF_DELAY	(HZ * 10)
-#define THERMAL_VCC		1800
-#define PULL_UP_RESISTOR	47000
-
-#define AB8500_SENSOR_AUX1		0
-#define AB8500_SENSOR_AUX2		1
-#define AB8500_SENSOR_BTEMP_BALL	2
-#define AB8500_SENSOR_BAT_CTRL		3
-#define NUM_MONITORED_SENSORS		4
-
-struct ab8500_gpadc_cfg {
-	const struct abx500_res_to_temp *temp_tbl;
-	int tbl_sz;
-	int vcc;
-	int r_up;
-};
-
-struct ab8500_temp {
-	struct iio_channel *aux1;
-	struct iio_channel *aux2;
-	struct ab8500_btemp *btemp;
-	struct delayed_work power_off_work;
-	struct ab8500_gpadc_cfg cfg;
-	struct abx500_temp *abx500_data;
-};
-
-/*
- * The hardware connection is like this:
- * VCC----[ R_up ]-----[ NTC ]----GND
- * where R_up is pull-up resistance, and GPADC measures voltage on NTC.
- * and res_to_temp table is strictly sorted by falling resistance values.
- */
-static int ab8500_voltage_to_temp(struct ab8500_gpadc_cfg *cfg,
-		int v_ntc, int *temp)
-{
-	int r_ntc, i = 0, tbl_sz = cfg->tbl_sz;
-	const struct abx500_res_to_temp *tbl = cfg->temp_tbl;
-
-	if (cfg->vcc < 0 || v_ntc >= cfg->vcc)
-		return -EINVAL;
-
-	r_ntc = v_ntc * cfg->r_up / (cfg->vcc - v_ntc);
-	if (r_ntc > tbl[0].resist || r_ntc < tbl[tbl_sz - 1].resist)
-		return -EINVAL;
-
-	while (!(r_ntc <= tbl[i].resist && r_ntc > tbl[i + 1].resist) &&
-			i < tbl_sz - 2)
-		i++;
-
-	/* return milli-Celsius */
-	*temp = tbl[i].temp * 1000 + ((tbl[i + 1].temp - tbl[i].temp) * 1000 *
-		(r_ntc - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
-
-	return 0;
-}
-
-static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
-{
-	int voltage, ret;
-	struct ab8500_temp *ab8500_data = data->plat_data;
-
-	if (sensor == AB8500_SENSOR_BTEMP_BALL) {
-		*temp = ab8500_btemp_get_temp(ab8500_data->btemp);
-	} else if (sensor == AB8500_SENSOR_BAT_CTRL) {
-		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
-	} else if (sensor == AB8500_SENSOR_AUX1) {
-		ret = iio_read_channel_processed(ab8500_data->aux1, &voltage);
-		if (ret < 0)
-			return ret;
-		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
-		if (ret < 0)
-			return ret;
-	} else if (sensor == AB8500_SENSOR_AUX2) {
-		ret = iio_read_channel_processed(ab8500_data->aux2, &voltage);
-		if (ret < 0)
-			return ret;
-		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static void ab8500_thermal_power_off(struct work_struct *work)
-{
-	struct ab8500_temp *ab8500_data = container_of(work,
-				struct ab8500_temp, power_off_work.work);
-	struct abx500_temp *abx500_data = ab8500_data->abx500_data;
-
-	dev_warn(&abx500_data->pdev->dev, "Power off due to critical temp\n");
-
-	kernel_power_off();
-}
-
-static ssize_t ab8500_show_name(struct device *dev,
-		struct device_attribute *devattr, char *buf)
-{
-	return sprintf(buf, "ab8500\n");
-}
-
-static ssize_t ab8500_show_label(struct device *dev,
-		struct device_attribute *devattr, char *buf)
-{
-	char *label;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	int index = attr->index;
-
-	switch (index) {
-	case 1:
-		label = "ext_adc1";
-		break;
-	case 2:
-		label = "ext_adc2";
-		break;
-	case 3:
-		label = "bat_temp";
-		break;
-	case 4:
-		label = "bat_ctrl";
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return sprintf(buf, "%s\n", label);
-}
-
-static int ab8500_temp_irq_handler(int irq, struct abx500_temp *data)
-{
-	struct ab8500_temp *ab8500_data = data->plat_data;
-
-	dev_warn(&data->pdev->dev, "Power off in %d s\n",
-		 DEFAULT_POWER_OFF_DELAY / HZ);
-
-	schedule_delayed_work(&ab8500_data->power_off_work,
-		DEFAULT_POWER_OFF_DELAY);
-	return 0;
-}
-
-int abx500_hwmon_init(struct abx500_temp *data)
-{
-	struct ab8500_temp *ab8500_data;
-
-	ab8500_data = devm_kzalloc(&data->pdev->dev, sizeof(*ab8500_data),
-		GFP_KERNEL);
-	if (!ab8500_data)
-		return -ENOMEM;
-
-	ab8500_data->btemp = ab8500_btemp_get();
-	if (IS_ERR(ab8500_data->btemp))
-		return PTR_ERR(ab8500_data->btemp);
-
-	INIT_DELAYED_WORK(&ab8500_data->power_off_work,
-			  ab8500_thermal_power_off);
-
-	ab8500_data->cfg.vcc = THERMAL_VCC;
-	ab8500_data->cfg.r_up = PULL_UP_RESISTOR;
-	ab8500_data->cfg.temp_tbl = ab8500_temp_tbl_a_thermistor;
-	ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
-
-	data->plat_data = ab8500_data;
-	ab8500_data->aux1 = devm_iio_channel_get(&data->pdev->dev, "aux1");
-	if (IS_ERR(ab8500_data->aux1)) {
-		if (PTR_ERR(ab8500_data->aux1) == -ENODEV)
-			return -EPROBE_DEFER;
-		dev_err(&data->pdev->dev, "failed to get AUX1 ADC channel\n");
-		return PTR_ERR(ab8500_data->aux1);
-	}
-	ab8500_data->aux2 = devm_iio_channel_get(&data->pdev->dev, "aux2");
-	if (IS_ERR(ab8500_data->aux2)) {
-		if (PTR_ERR(ab8500_data->aux2) == -ENODEV)
-			return -EPROBE_DEFER;
-		dev_err(&data->pdev->dev, "failed to get AUX2 ADC channel\n");
-		return PTR_ERR(ab8500_data->aux2);
-	}
-
-	data->gpadc_addr[0] = AB8500_SENSOR_AUX1;
-	data->gpadc_addr[1] = AB8500_SENSOR_AUX2;
-	data->gpadc_addr[2] = AB8500_SENSOR_BTEMP_BALL;
-	data->gpadc_addr[3] = AB8500_SENSOR_BAT_CTRL;
-	data->monitored_sensors = NUM_MONITORED_SENSORS;
-
-	data->ops.read_sensor = ab8500_read_sensor;
-	data->ops.irq_handler = ab8500_temp_irq_handler;
-	data->ops.show_name = ab8500_show_name;
-	data->ops.show_label = ab8500_show_label;
-	data->ops.is_visible = NULL;
-
-	return 0;
-}
-EXPORT_SYMBOL(abx500_hwmon_init);
-
-MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@linaro.org>");
-MODULE_DESCRIPTION("AB8500 temperature driver");
-MODULE_LICENSE("GPL");

drivers/hwmon/abx500.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson 2010 - 2013
- * Author: Martin Persson <martin.persson@stericsson.com>
- *         Hongbo Zhang <hongbo.zhang@linaro.org>
- *
- * ABX500 does not provide auto ADC, so to monitor the required temperatures,
- * a periodic work is used. It is more important to not wake up the CPU than
- * to perform this job, hence the use of a deferred delay.
- *
- * A deferred delay for thermal monitor is considered safe because:
- * If the chip gets too hot during a sleep state it's most likely due to
- * external factors, such as the surrounding temperature. I.e. no SW decisions
- * will make any difference.
- */
-
-#include <linux/err.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/workqueue.h>
-#include "abx500.h"
-
-#define DEFAULT_MONITOR_DELAY	HZ
-#define DEFAULT_MAX_TEMP	130
-
-static inline void schedule_monitor(struct abx500_temp *data)
-{
-	data->work_active = true;
-	schedule_delayed_work(&data->work, DEFAULT_MONITOR_DELAY);
-}
-
-static void threshold_updated(struct abx500_temp *data)
-{
-	int i;
-	for (i = 0; i < data->monitored_sensors; i++)
-		if (data->max[i] != 0 || data->min[i] != 0) {
-			schedule_monitor(data);
-			return;
-		}
-
-	dev_dbg(&data->pdev->dev, "No active thresholds.\n");
-	cancel_delayed_work_sync(&data->work);
-	data->work_active = false;
-}
-
-static void gpadc_monitor(struct work_struct *work)
-{
-	int temp, i, ret;
-	char alarm_node[30];
-	bool updated_min_alarm, updated_max_alarm;
-	struct abx500_temp *data;
-
-	data = container_of(work, struct abx500_temp, work.work);
-	mutex_lock(&data->lock);
-
-	for (i = 0; i < data->monitored_sensors; i++) {
-		/* Thresholds are considered inactive if set to 0 */
-		if (data->max[i] == 0 && data->min[i] == 0)
-			continue;
-
-		if (data->max[i] < data->min[i])
-			continue;
-
-		ret = data->ops.read_sensor(data, data->gpadc_addr[i], &temp);
-		if (ret < 0) {
-			dev_err(&data->pdev->dev, "GPADC read failed\n");
-			continue;
-		}
-
-		updated_min_alarm = false;
-		updated_max_alarm = false;
-
-		if (data->min[i] != 0) {
-			if (temp < data->min[i]) {
-				if (data->min_alarm[i] == false) {
-					data->min_alarm[i] = true;
-					updated_min_alarm = true;
-				}
-			} else {
-				if (data->min_alarm[i] == true) {
-					data->min_alarm[i] = false;
-					updated_min_alarm = true;
-				}
-			}
-		}
-		if (data->max[i] != 0) {
-			if (temp > data->max[i]) {
-				if (data->max_alarm[i] == false) {
-					data->max_alarm[i] = true;
-					updated_max_alarm = true;
-				}
-			} else if (temp < data->max[i] - data->max_hyst[i]) {
-				if (data->max_alarm[i] == true) {
-					data->max_alarm[i] = false;
-					updated_max_alarm = true;
-				}
-			}
-		}
-
-		if (updated_min_alarm) {
-			ret = sprintf(alarm_node, "temp%d_min_alarm", i + 1);
-			sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node);
-		}
-		if (updated_max_alarm) {
-			ret = sprintf(alarm_node, "temp%d_max_alarm", i + 1);
-			sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node);
-		}
-	}
-
-	schedule_monitor(data);
-	mutex_unlock(&data->lock);
-}
-
-/* HWMON sysfs interfaces */
-static ssize_t name_show(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	/* Show chip name */
-	return data->ops.show_name(dev, devattr, buf);
-}
-
-static ssize_t label_show(struct device *dev,
-			  struct device_attribute *devattr, char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	/* Show each sensor label */
-	return data->ops.show_label(dev, devattr, buf);
-}
-
-static ssize_t input_show(struct device *dev,
-			  struct device_attribute *devattr, char *buf)
-{
-	int ret, temp;
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	u8 gpadc_addr = data->gpadc_addr[attr->index];
-
-	ret = data->ops.read_sensor(data, gpadc_addr, &temp);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d\n", temp);
-}
-
-/* Set functions (RW nodes) */
-static ssize_t min_store(struct device *dev, struct device_attribute *devattr,
-			 const char *buf, size_t count)
-{
-	unsigned long val;
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	int res = kstrtol(buf, 10, &val);
-	if (res < 0)
-		return res;
-
-	val = clamp_val(val, 0, DEFAULT_MAX_TEMP);
-
-	mutex_lock(&data->lock);
-	data->min[attr->index] = val;
-	threshold_updated(data);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t max_store(struct device *dev, struct device_attribute *devattr,
-			 const char *buf, size_t count)
-{
-	unsigned long val;
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	int res = kstrtol(buf, 10, &val);
-	if (res < 0)
-		return res;
-
-	val = clamp_val(val, 0, DEFAULT_MAX_TEMP);
-
-	mutex_lock(&data->lock);
-	data->max[attr->index] = val;
-	threshold_updated(data);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-static ssize_t max_hyst_store(struct device *dev,
-			      struct device_attribute *devattr,
-			      const char *buf, size_t count)
-{
-	unsigned long val;
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	int res = kstrtoul(buf, 10, &val);
-	if (res < 0)
-		return res;
-
-	val = clamp_val(val, 0, DEFAULT_MAX_TEMP);
-
-	mutex_lock(&data->lock);
-	data->max_hyst[attr->index] = val;
-	threshold_updated(data);
-	mutex_unlock(&data->lock);
-
-	return count;
-}
-
-/* Show functions (RO nodes) */
-static ssize_t min_show(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return sprintf(buf, "%lu\n", data->min[attr->index]);
-}
-
-static ssize_t max_show(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return sprintf(buf, "%lu\n", data->max[attr->index]);
-}
-
-static ssize_t max_hyst_show(struct device *dev,
-			     struct device_attribute *devattr, char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return sprintf(buf, "%lu\n", data->max_hyst[attr->index]);
-}
-
-static ssize_t min_alarm_show(struct device *dev,
-			      struct device_attribute *devattr, char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return sprintf(buf, "%d\n", data->min_alarm[attr->index]);
-}
-
-static ssize_t max_alarm_show(struct device *dev,
-			      struct device_attribute *devattr, char *buf)
-{
-	struct abx500_temp *data = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return sprintf(buf, "%d\n", data->max_alarm[attr->index]);
-}
-
-static umode_t abx500_attrs_visible(struct kobject *kobj,
-				   struct attribute *attr, int n)
-{
-	struct device *dev = kobj_to_dev(kobj);
-	struct abx500_temp *data = dev_get_drvdata(dev);
-
-	if (data->ops.is_visible)
-		return data->ops.is_visible(attr, n);
-
-	return attr->mode;
-}
-
-/* Chip name, required by hwmon */
-static SENSOR_DEVICE_ATTR_RO(name, name, 0);
-
-/* GPADC - SENSOR1 */
-static SENSOR_DEVICE_ATTR_RO(temp1_label, label, 0);
-static SENSOR_DEVICE_ATTR_RO(temp1_input, input, 0);
-static SENSOR_DEVICE_ATTR_RW(temp1_min, min, 0);
-static SENSOR_DEVICE_ATTR_RW(temp1_max, max, 0);
-static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, max_hyst, 0);
-static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, min_alarm, 0);
-static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, max_alarm, 0);
-
-/* GPADC - SENSOR2 */
-static SENSOR_DEVICE_ATTR_RO(temp2_label, label, 1);
-static SENSOR_DEVICE_ATTR_RO(temp2_input, input, 1);
-static SENSOR_DEVICE_ATTR_RW(temp2_min, min, 1);
-static SENSOR_DEVICE_ATTR_RW(temp2_max, max, 1);
-static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, max_hyst, 1);
-static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, min_alarm, 1);
-static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, max_alarm, 1);
-
-/* GPADC - SENSOR3 */
-static SENSOR_DEVICE_ATTR_RO(temp3_label, label, 2);
-static SENSOR_DEVICE_ATTR_RO(temp3_input, input, 2);
-static SENSOR_DEVICE_ATTR_RW(temp3_min, min, 2);
-static SENSOR_DEVICE_ATTR_RW(temp3_max, max, 2);
-static SENSOR_DEVICE_ATTR_RW(temp3_max_hyst, max_hyst, 2);
-static SENSOR_DEVICE_ATTR_RO(temp3_min_alarm, min_alarm, 2);
-static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, max_alarm, 2);
-
-/* GPADC - SENSOR4 */
-static SENSOR_DEVICE_ATTR_RO(temp4_label, label, 3);
-static SENSOR_DEVICE_ATTR_RO(temp4_input, input, 3);
-static SENSOR_DEVICE_ATTR_RW(temp4_min, min, 3);
-static SENSOR_DEVICE_ATTR_RW(temp4_max, max, 3);
-static SENSOR_DEVICE_ATTR_RW(temp4_max_hyst, max_hyst, 3);
-static SENSOR_DEVICE_ATTR_RO(temp4_min_alarm, min_alarm, 3);
-static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, max_alarm, 3);
-
-static struct attribute *abx500_temp_attributes[] = {
-	&sensor_dev_attr_name.dev_attr.attr,
-
-	&sensor_dev_attr_temp1_label.dev_attr.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_min.dev_attr.attr,
-	&sensor_dev_attr_temp1_max.dev_attr.attr,
-	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
-
-	&sensor_dev_attr_temp2_label.dev_attr.attr,
-	&sensor_dev_attr_temp2_input.dev_attr.attr,
-	&sensor_dev_attr_temp2_min.dev_attr.attr,
-	&sensor_dev_attr_temp2_max.dev_attr.attr,
-	&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
-
-	&sensor_dev_attr_temp3_label.dev_attr.attr,
-	&sensor_dev_attr_temp3_input.dev_attr.attr,
-	&sensor_dev_attr_temp3_min.dev_attr.attr,
-	&sensor_dev_attr_temp3_max.dev_attr.attr,
-	&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
-
-	&sensor_dev_attr_temp4_label.dev_attr.attr,
-	&sensor_dev_attr_temp4_input.dev_attr.attr,
-	&sensor_dev_attr_temp4_min.dev_attr.attr,
-	&sensor_dev_attr_temp4_max.dev_attr.attr,
-	&sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group abx500_temp_group = {
-	.attrs = abx500_temp_attributes,
-	.is_visible = abx500_attrs_visible,
-};
-
-static irqreturn_t abx500_temp_irq_handler(int irq, void *irq_data)
-{
-	struct platform_device *pdev = irq_data;
-	struct abx500_temp *data = platform_get_drvdata(pdev);
-
-	data->ops.irq_handler(irq, data);
-	return IRQ_HANDLED;
-}
-
-static int setup_irqs(struct platform_device *pdev)
-{
-	int ret;
-	int irq = platform_get_irq_byname(pdev, "ABX500_TEMP_WARM");
-
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Get irq by name failed\n");
-		return irq;
-	}
-
-	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-		abx500_temp_irq_handler, 0, "abx500-temp", pdev);
-	if (ret < 0)
-		dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret);
-
-	return ret;
-}
-
-static int abx500_temp_probe(struct platform_device *pdev)
-{
-	struct abx500_temp *data;
-	int err;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->pdev = pdev;
-	mutex_init(&data->lock);
-
-	/* Chip specific initialization */
-	err = abx500_hwmon_init(data);
-	if (err	< 0 || !data->ops.read_sensor || !data->ops.show_name ||
-			!data->ops.show_label)
-		return err;
-
-	INIT_DEFERRABLE_WORK(&data->work, gpadc_monitor);
-
-	platform_set_drvdata(pdev, data);
-
-	err = sysfs_create_group(&pdev->dev.kobj, &abx500_temp_group);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Create sysfs group failed (%d)\n", err);
-		return err;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
-		goto exit_sysfs_group;
-	}
-
-	if (data->ops.irq_handler) {
-		err = setup_irqs(pdev);
-		if (err < 0)
-			goto exit_hwmon_reg;
-	}
-	return 0;
-
-exit_hwmon_reg:
-	hwmon_device_unregister(data->hwmon_dev);
-exit_sysfs_group:
-	sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group);
-	return err;
-}
-
-static int abx500_temp_remove(struct platform_device *pdev)
-{
-	struct abx500_temp *data = platform_get_drvdata(pdev);
-
-	cancel_delayed_work_sync(&data->work);
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group);
-
-	return 0;
-}
-
-static int abx500_temp_suspend(struct platform_device *pdev,
-			       pm_message_t state)
-{
-	struct abx500_temp *data = platform_get_drvdata(pdev);
-
-	if (data->work_active)
-		cancel_delayed_work_sync(&data->work);
-
-	return 0;
-}
-
-static int abx500_temp_resume(struct platform_device *pdev)
-{
-	struct abx500_temp *data = platform_get_drvdata(pdev);
-
-	if (data->work_active)
-		schedule_monitor(data);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id abx500_temp_match[] = {
-	{ .compatible = "stericsson,abx500-temp" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, abx500_temp_match);
-#endif
-
-static struct platform_driver abx500_temp_driver = {
-	.driver = {
-		.name = "abx500-temp",
-		.of_match_table = of_match_ptr(abx500_temp_match),
-	},
-	.suspend = abx500_temp_suspend,
-	.resume = abx500_temp_resume,
-	.probe = abx500_temp_probe,
-	.remove = abx500_temp_remove,
-};
-
-module_platform_driver(abx500_temp_driver);
-
-MODULE_AUTHOR("Martin Persson <martin.persson@stericsson.com>");
-MODULE_DESCRIPTION("ABX500 temperature driver");
-MODULE_LICENSE("GPL");

drivers/hwmon/abx500.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson 2010 - 2013
- * Author: Martin Persson <martin.persson@stericsson.com>
- *         Hongbo Zhang <hongbo.zhang@linaro.com>
- */
-
-#ifndef _ABX500_H
-#define _ABX500_H
-
-#define NUM_SENSORS 5
-
-struct abx500_temp;
-
-/*
- * struct abx500_temp_ops - abx500 chip specific ops
- * @read_sensor: reads gpadc output
- * @irq_handler: irq handler
- * @show_name: hwmon device name
- * @show_label: hwmon attribute label
- * @is_visible: is attribute visible
- */
-struct abx500_temp_ops {
-	int (*read_sensor)(struct abx500_temp *, u8, int *);
-	int (*irq_handler)(int, struct abx500_temp *);
-	ssize_t (*show_name)(struct device *,
-			struct device_attribute *, char *);
-	ssize_t (*show_label) (struct device *,
-			struct device_attribute *, char *);
-	int (*is_visible)(struct attribute *, int);
-};
-
-/*
- * struct abx500_temp - representation of temp mon device
- * @pdev: platform device
- * @hwmon_dev: hwmon device
- * @ops: abx500 chip specific ops
- * @gpadc_addr: gpadc channel address
- * @min: sensor temperature min value
- * @max: sensor temperature max value
- * @max_hyst: sensor temperature hysteresis value for max limit
- * @min_alarm: sensor temperature min alarm
- * @max_alarm: sensor temperature max alarm
- * @work: delayed work scheduled to monitor temperature periodically
- * @work_active: True if work is active
- * @lock: mutex
- * @monitored_sensors: number of monitored sensors
- * @plat_data: private usage, usually points to platform specific data
- */
-struct abx500_temp {
-	struct platform_device *pdev;
-	struct device *hwmon_dev;
-	struct abx500_temp_ops ops;
-	u8 gpadc_addr[NUM_SENSORS];
-	unsigned long min[NUM_SENSORS];
-	unsigned long max[NUM_SENSORS];
-	unsigned long max_hyst[NUM_SENSORS];
-	bool min_alarm[NUM_SENSORS];
-	bool max_alarm[NUM_SENSORS];
-	struct delayed_work work;
-	bool work_active;
-	struct mutex lock;
-	int monitored_sensors;
-	void *plat_data;
-};
-
-int abx500_hwmon_init(struct abx500_temp *data);
-
-#endif /* _ABX500_H */

drivers/hwmon/aht10.c

+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * aht10.c - Linux hwmon driver for AHT10 Temperature and Humidity sensor
+ * Copyright (C) 2020 Johannes Cornelis Draaijer
+ */
+
+#include <linux/delay.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+
+#define AHT10_MEAS_SIZE		6
+
+/*
+ * Poll intervals (in milliseconds)
+ */
+#define AHT10_DEFAULT_MIN_POLL_INTERVAL	2000
+#define AHT10_MIN_POLL_INTERVAL		2000
+
+/*
+ * I2C command delays (in microseconds)
+ */
+#define AHT10_MEAS_DELAY	80000
+#define AHT10_CMD_DELAY		350000
+#define AHT10_DELAY_EXTRA	100000
+
+/*
+ * Command bytes
+ */
+#define AHT10_CMD_INIT	0b11100001
+#define AHT10_CMD_MEAS	0b10101100
+#define AHT10_CMD_RST	0b10111010
+
+/*
+ * Flags in the answer byte/command
+ */
+#define AHT10_CAL_ENABLED	BIT(3)
+#define AHT10_BUSY		BIT(7)
+#define AHT10_MODE_NOR		(BIT(5) | BIT(6))
+#define AHT10_MODE_CYC		BIT(5)
+#define AHT10_MODE_CMD		BIT(6)
+
+#define AHT10_MAX_POLL_INTERVAL_LEN	30
+
+/**
+ *   struct aht10_data - All the data required to operate an AHT10 chip
+ *   @client: the i2c client associated with the AHT10
+ *   @lock: a mutex that is used to prevent parallel access to the
+ *          i2c client
+ *   @min_poll_interval: the minimum poll interval
+ *                   While the poll rate limit is not 100% necessary,
+ *                   the datasheet recommends that a measurement
+ *                   is not performed too often to prevent
+ *                   the chip from warming up due to the heat it generates.
+ *                   If it's unwanted, it can be ignored setting it to
+ *                   it to 0. Default value is 2000 ms
+ *   @previous_poll_time: the previous time that the AHT10
+ *                        was polled
+ *   @temperature: the latest temperature value received from
+ *                 the AHT10
+ *   @humidity: the latest humidity value received from the
+ *              AHT10
+ */
+
+struct aht10_data {
+	struct i2c_client *client;
+	/*
+	 * Prevent simultaneous access to the i2c
+	 * client and previous_poll_time
+	 */
+	struct mutex lock;
+	ktime_t min_poll_interval;
+	ktime_t previous_poll_time;
+	int temperature;
+	int humidity;
+};
+
+/**
+ * aht10_init() - Initialize an AHT10 chip
+ * @client: the i2c client associated with the AHT10
+ * @data: the data associated with this AHT10 chip
+ * Return: 0 if succesfull, 1 if not
+ */
+static int aht10_init(struct aht10_data *data)
+{
+	const u8 cmd_init[] = {AHT10_CMD_INIT, AHT10_CAL_ENABLED | AHT10_MODE_CYC,
+			       0x00};
+	int res;
+	u8 status;
+	struct i2c_client *client = data->client;
+
+	res = i2c_master_send(client, cmd_init, 3);
+	if (res < 0)
+		return res;
+
+	usleep_range(AHT10_CMD_DELAY, AHT10_CMD_DELAY +
+		     AHT10_DELAY_EXTRA);
+
+	res = i2c_master_recv(client, &status, 1);
+	if (res != 1)
+		return -ENODATA;
+
+	if (status & AHT10_BUSY)
+		return -EBUSY;
+
+	return 0;
+}
+
+/**
+ * aht10_polltime_expired() - check if the minimum poll interval has
+ *                                  expired
+ * @data: the data containing the time to compare
+ * Return: 1 if the minimum poll interval has expired, 0 if not
+ */
+static int aht10_polltime_expired(struct aht10_data *data)
+{
+	ktime_t current_time = ktime_get_boottime();
+	ktime_t difference = ktime_sub(current_time, data->previous_poll_time);
+
+	return ktime_after(difference, data->min_poll_interval);
+}
+
+/**
+ * aht10_read_values() - read and parse the raw data from the AHT10
+ * @aht10_data: the struct aht10_data to use for the lock
+ * Return: 0 if succesfull, 1 if not
+ */
+static int aht10_read_values(struct aht10_data *data)
+{
+	const u8 cmd_meas[] = {AHT10_CMD_MEAS, 0x33, 0x00};
+	u32 temp, hum;
+	int res;
+	u8 raw_data[AHT10_MEAS_SIZE];
+	struct i2c_client *client = data->client;
+
+	mutex_lock(&data->lock);
+	if (aht10_polltime_expired(data)) {
+		res = i2c_master_send(client, cmd_meas, sizeof(cmd_meas));
+		if (res < 0) {
+			mutex_unlock(&data->lock);
+			return res;
+		}
+
+		usleep_range(AHT10_MEAS_DELAY,
+			     AHT10_MEAS_DELAY + AHT10_DELAY_EXTRA);
+
+		res = i2c_master_recv(client, raw_data, AHT10_MEAS_SIZE);
+		if (res != AHT10_MEAS_SIZE) {
+			mutex_unlock(&data->lock);
+			if (res >= 0)
+				return -ENODATA;
+			else
+				return res;
+		}
+
+		hum =   ((u32)raw_data[1] << 12u) |
+			((u32)raw_data[2] << 4u) |
+			((raw_data[3] & 0xF0u) >> 4u);
+
+		temp =  ((u32)(raw_data[3] & 0x0Fu) << 16u) |
+			((u32)raw_data[4] << 8u) |
+			raw_data[5];
+
+		temp = ((temp * 625) >> 15u) * 10;
+		hum = ((hum * 625) >> 16u) * 10;
+
+		data->temperature = (int)temp - 50000;
+		data->humidity = hum;
+		data->previous_poll_time = ktime_get_boottime();
+	}
+	mutex_unlock(&data->lock);
+	return 0;
+}
+
+/**
+ * aht10_interval_write() - store the given minimum poll interval.
+ * Return: 0 on success, -EINVAL if a value lower than the
+ *         AHT10_MIN_POLL_INTERVAL is given
+ */
+static ssize_t aht10_interval_write(struct aht10_data *data,
+				    long val)
+{
+	data->min_poll_interval = ms_to_ktime(clamp_val(val, 2000, LONG_MAX));
+	return 0;
+}
+
+/**
+ * aht10_interval_read() - read the minimum poll interval
+ *                            in milliseconds
+ */
+static ssize_t aht10_interval_read(struct aht10_data *data,
+				   long *val)
+{
+	*val = ktime_to_ms(data->min_poll_interval);
+	return 0;
+}
+
+/**
+ * aht10_temperature1_read() - read the temperature in millidegrees
+ */
+static int aht10_temperature1_read(struct aht10_data *data, long *val)
+{
+	int res;
+
+	res = aht10_read_values(data);
+	if (res < 0)
+		return res;
+
+	*val = data->temperature;
+	return 0;
+}
+
+/**
+ * aht10_humidity1_read() - read the relative humidity in millipercent
+ */
+static int aht10_humidity1_read(struct aht10_data *data, long *val)
+{
+	int res;
+
+	res = aht10_read_values(data);
+	if (res < 0)
+		return res;
+
+	*val = data->humidity;
+	return 0;
+}
+
+static umode_t aht10_hwmon_visible(const void *data, enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+	case hwmon_humidity:
+		return 0444;
+	case hwmon_chip:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int aht10_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			    u32 attr, int channel, long *val)
+{
+	struct aht10_data *data = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_temp:
+		return aht10_temperature1_read(data, val);
+	case hwmon_humidity:
+		return aht10_humidity1_read(data, val);
+	case hwmon_chip:
+		return aht10_interval_read(data, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int aht10_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+			     u32 attr, int channel, long val)
+{
+	struct aht10_data *data = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_chip:
+		return aht10_interval_write(data, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_channel_info *aht10_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	HWMON_CHANNEL_INFO(humidity, HWMON_H_INPUT),
+	NULL,
+};
+
+static const struct hwmon_ops aht10_hwmon_ops = {
+	.is_visible = aht10_hwmon_visible,
+	.read = aht10_hwmon_read,
+	.write = aht10_hwmon_write,
+};
+
+static const struct hwmon_chip_info aht10_chip_info = {
+	.ops = &aht10_hwmon_ops,
+	.info = aht10_info,
+};
+
+static int aht10_probe(struct i2c_client *client,
+		       const struct i2c_device_id *aht10_id)
+{
+	struct device *device = &client->dev;
+	struct device *hwmon_dev;
+	struct aht10_data *data;
+	int res;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENOENT;
+
+	data = devm_kzalloc(device, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->min_poll_interval = ms_to_ktime(AHT10_DEFAULT_MIN_POLL_INTERVAL);
+	data->client = client;
+
+	mutex_init(&data->lock);
+
+	res = aht10_init(data);
+	if (res < 0)
+		return res;
+
+	res = aht10_read_values(data);
+	if (res < 0)
+		return res;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(device,
+							 client->name,
+							 data,
+							 &aht10_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id aht10_id[] = {
+	{ "aht10", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, aht10_id);
+
+static struct i2c_driver aht10_driver = {
+	.driver = {
+		.name = "aht10",
+	},
+	.probe      = aht10_probe,
+	.id_table   = aht10_id,
+};
+
+module_i2c_driver(aht10_driver);
+
+MODULE_AUTHOR("Johannes Cornelis Draaijer <jcdra1@gmail.com>");
+MODULE_DESCRIPTION("AHT10 Temperature and Humidity sensor driver");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");

drivers/hwmon/amd_energy.c

@@ -333,6 +333,7 @@ static struct platform_device *amd_energy_platdev;
 static const struct x86_cpu_id cpu_ids[] __initconst = {
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x17, 0x31, NULL),
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x19, 0x01, NULL),
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x19, 0x30, NULL),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, cpu_ids);

drivers/hwmon/applesmc.c

@@ -565,7 +565,7 @@ static int applesmc_init_index(struct applesmc_registers *s)
 static int applesmc_init_smcreg_try(void)
 {
 	struct applesmc_registers *s = &smcreg;
-	bool left_light_sensor = 0, right_light_sensor = 0;
+	bool left_light_sensor = false, right_light_sensor = false;
 	unsigned int count;
 	u8 tmp[1];
 	int ret;

drivers/hwmon/aspeed-pwm-tacho.c

@@ -620,7 +620,7 @@ static ssize_t rpm_show(struct device *dev, struct device_attribute *attr,
 static umode_t pwm_is_visible(struct kobject *kobj,
 			      struct attribute *a, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
 
 	if (!priv->pwm_present[index])
@@ -631,7 +631,7 @@ static umode_t pwm_is_visible(struct kobject *kobj,
 static umode_t fan_dev_is_visible(struct kobject *kobj,
 				  struct attribute *a, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
 
 	if (!priv->fan_tach_present[index])

drivers/hwmon/da9052-hwmon.c

@@ -299,7 +299,7 @@ static ssize_t label_show(struct device *dev,
 static umode_t da9052_channel_is_visible(struct kobject *kobj,
 					 struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
 	struct device_attribute *dattr = container_of(attr,
 				struct device_attribute, attr);

drivers/hwmon/dell-smm-hwmon.c

@@ -1159,6 +1159,13 @@ static struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initdata = {
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"),
 		},
 	},
+	{
+		.ident = "Dell XPS 15 L502X",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Dell System XPS L502X"),
+		},
+	},
 	{ }
 };
 

drivers/hwmon/gpio-fan.c

@@ -299,7 +299,7 @@ static DEVICE_ATTR(fan1_target, 0644, fan1_input_show, set_rpm);
 static umode_t gpio_fan_is_visible(struct kobject *kobj,
 				   struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct gpio_fan_data *data = dev_get_drvdata(dev);
 
 	if (index == 0 && !data->alarm_gpio)

drivers/hwmon/k10temp.c

@@ -448,7 +448,8 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		data->is_zen = true;
 
 		switch (boot_cpu_data.x86_model) {
-		case 0x0 ... 0x1:	/* Zen3 */
+		case 0x0 ... 0x1:	/* Zen3 SP3/TR */
+		case 0x21:		/* Zen3 Ryzen Desktop */
 			k10temp_get_ccd_support(pdev, data, 8);
 			break;
 		}

drivers/hwmon/max6650.c

@@ -321,7 +321,7 @@ static SENSOR_DEVICE_ATTR_RO(gpio2_alarm, alarm, MAX6650_ALRM_GPIO2);
 static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
 				     int n)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct max6650_data *data = dev_get_drvdata(dev);
 	struct device_attribute *devattr;
 

drivers/hwmon/nct6683.c

@@ -169,6 +169,7 @@ superio_exit(int ioreg)
 #define NCT6683_CUSTOMER_ID_INTEL	0x805
 #define NCT6683_CUSTOMER_ID_MITAC	0xa0e
 #define NCT6683_CUSTOMER_ID_MSI		0x201
+#define NCT6683_CUSTOMER_ID_ASROCK		0xe2c
 
 #define NCT6683_REG_BUILD_YEAR		0x604
 #define NCT6683_REG_BUILD_MONTH		0x605
@@ -1225,6 +1226,8 @@ static int nct6683_probe(struct platform_device *pdev)
 		break;
 	case NCT6683_CUSTOMER_ID_MSI:
 		break;
+	case NCT6683_CUSTOMER_ID_ASROCK:
+		break;
 	default:
 		if (!force)
 			return -ENODEV;

drivers/hwmon/pc87360.c

@@ -1700,8 +1700,8 @@ static int __init pc87360_device_add(unsigned short address)
 			continue;
 		res[res_count].start = extra_isa[i];
 		res[res_count].end = extra_isa[i] + PC87360_EXTENT - 1;
-		res[res_count].name = "pc87360",
-		res[res_count].flags = IORESOURCE_IO,
+		res[res_count].name = "pc87360";
+		res[res_count].flags = IORESOURCE_IO;
 
 		err = acpi_check_resource_conflict(&res[res_count]);
 		if (err)

drivers/hwmon/pmbus/Kconfig

@@ -158,10 +158,10 @@ config SENSORS_MAX16064
 	  be called max16064.
 
 config SENSORS_MAX16601
-	tristate "Maxim MAX16601"
+	tristate "Maxim MAX16508, MAX16601"
 	help
 	  If you say yes here you get hardware monitoring support for Maxim
-	  MAX16601.
+	  MAX16508 and MAX16601.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called max16601.

drivers/hwmon/pmbus/ibm-cffps.c

@@ -472,7 +472,7 @@ static struct pmbus_driver_info ibm_cffps_info[] = {
 };
 
 static struct pmbus_platform_data ibm_cffps_pdata = {
-	.flags = PMBUS_SKIP_STATUS_CHECK,
+	.flags = PMBUS_SKIP_STATUS_CHECK | PMBUS_NO_CAPABILITY,
 };
 
 static int ibm_cffps_probe(struct i2c_client *client)

drivers/hwmon/pmbus/lm25066.c

@@ -371,21 +371,18 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
 	case PMBUS_VIN_OV_WARN_LIMIT:
 		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
 		ret = pmbus_write_word_data(client, 0, reg, word);
-		pmbus_clear_cache(client);
 		break;
 	case PMBUS_IIN_OC_WARN_LIMIT:
 		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
 		ret = pmbus_write_word_data(client, 0,
 					    LM25066_MFR_IIN_OC_WARN_LIMIT,
 					    word);
-		pmbus_clear_cache(client);
 		break;
 	case PMBUS_PIN_OP_WARN_LIMIT:
 		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
 		ret = pmbus_write_word_data(client, 0,
 					    LM25066_MFR_PIN_OP_WARN_LIMIT,
 					    word);
-		pmbus_clear_cache(client);
 		break;
 	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
 		/* Adjust from VIN coefficients (for LM25056) */
@@ -393,7 +390,6 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
 		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
 		ret = pmbus_write_word_data(client, 0,
 					    LM25056_VAUX_UV_WARN_LIMIT, word);
-		pmbus_clear_cache(client);
 		break;
 	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
 		/* Adjust from VIN coefficients (for LM25056) */
@@ -401,7 +397,6 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
 		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
 		ret = pmbus_write_word_data(client, 0,
 					    LM25056_VAUX_OV_WARN_LIMIT, word);
-		pmbus_clear_cache(client);
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
 		ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);

drivers/hwmon/pmbus/max16601.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- * Hardware monitoring driver for Maxim MAX16601
+ * Hardware monitoring driver for Maxim MAX16508 and MAX16601.
  *
  * Implementation notes:
  *
- * Ths chip supports two rails, VCORE and VSA. Telemetry information for the
- * two rails is reported in two subsequent I2C addresses. The driver
+ * This chip series supports two rails, VCORE and VSA. Telemetry information
+ * for the two rails is reported in two subsequent I2C addresses. The driver
  * instantiates a dummy I2C client at the second I2C address to report
  * information for the VSA rail in a single instance of the driver.
  * Telemetry for the VSA rail is reported to the PMBus core in PMBus page 2.
@@ -31,6 +31,9 @@
 
 #include "pmbus.h"
 
+enum chips { max16508, max16601 };
+
+#define REG_DEFAULT_NUM_POP	0xc4
 #define REG_SETPT_DVID		0xd1
 #define  DAC_10MV_MODE		BIT(4)
 #define REG_IOUT_AVG_PK		0xee
@@ -40,7 +43,10 @@
 #define  CORE_RAIL_INDICATOR	BIT(7)
 #define REG_PHASE_REPORTING	0xf4
 
+#define MAX16601_NUM_PHASES	8
+
 struct max16601_data {
+	enum chips id;
 	struct pmbus_driver_info info;
 	struct i2c_client *vsa;
 	int iout_avg_pkg;
@@ -185,6 +191,7 @@ static int max16601_write_word(struct i2c_client *client, int page, int reg,
 static int max16601_identify(struct i2c_client *client,
 			     struct pmbus_driver_info *info)
 {
+	struct max16601_data *data = to_max16601_data(info);
 	int reg;
 
 	reg = i2c_smbus_read_byte_data(client, REG_SETPT_DVID);
@@ -195,6 +202,21 @@ static int max16601_identify(struct i2c_client *client,
 	else
 		info->vrm_version[0] = vr12;
 
+	if (data->id != max16601)
+		return 0;
+
+	reg = i2c_smbus_read_byte_data(client, REG_DEFAULT_NUM_POP);
+	if (reg < 0)
+		return reg;
+
+	/*
+	 * If REG_DEFAULT_NUM_POP returns 0, we don't know how many phases
+	 * are populated. Stick with the default in that case.
+	 */
+	reg &= 0x0f;
+	if (reg && reg <= MAX16601_NUM_PHASES)
+		info->phases[0] = reg;
+
 	return 0;
 }
 
@@ -216,7 +238,7 @@ static struct pmbus_driver_info max16601_info = {
 	.func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT |
 		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_PAGE_VIRTUAL,
-	.phases[0] = 8,
+	.phases[0] = MAX16601_NUM_PHASES,
 	.pfunc[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
 	.pfunc[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
 	.pfunc[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
@@ -239,28 +261,61 @@ static void max16601_remove(void *_data)
 	i2c_unregister_device(data->vsa);
 }
 
-static int max16601_probe(struct i2c_client *client)
+static const struct i2c_device_id max16601_id[] = {
+	{"max16508", max16508},
+	{"max16601", max16601},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max16601_id);
+
+static int max16601_get_id(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
-	struct max16601_data *data;
+	enum chips id;
 	int ret;
 
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_BYTE_DATA |
-				     I2C_FUNC_SMBUS_READ_BLOCK_DATA))
-		return -ENODEV;
-
 	ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
-	if (ret < 0)
+	if (ret < 0 || ret < 11)
 		return -ENODEV;
 
-	/* PMBUS_IC_DEVICE_ID is expected to return "MAX16601y.xx" */
-	if (ret < 11 || strncmp(buf, "MAX16601", 8)) {
+	/*
+	 * PMBUS_IC_DEVICE_ID is expected to return "MAX16601y.xx"
+	 * or "MAX16500y.xx".
+	 */
+	if (!strncmp(buf, "MAX16500", 8)) {
+		id = max16508;
+	} else if (!strncmp(buf, "MAX16601", 8)) {
+		id = max16601;
+	} else {
 		buf[ret] = '\0';
 		dev_err(dev, "Unsupported chip '%s'\n", buf);
 		return -ENODEV;
 	}
+	return id;
+}
+
+static int max16601_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	const struct i2c_device_id *id;
+	struct max16601_data *data;
+	int ret, chip_id;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	chip_id = max16601_get_id(client);
+	if (chip_id < 0)
+		return chip_id;
+
+	id = i2c_match_id(max16601_id, client);
+	if (chip_id != id->driver_data)
+		dev_warn(&client->dev,
+			 "Device mismatch: Configured %s (%d), detected %d\n",
+			 id->name, (int) id->driver_data, chip_id);
 
 	ret = i2c_smbus_read_byte_data(client, REG_PHASE_ID);
 	if (ret < 0)
@@ -275,6 +330,7 @@ static int max16601_probe(struct i2c_client *client)
 	if (!data)
 		return -ENOMEM;
 
+	data->id = chip_id;
 	data->iout_avg_pkg = 0xfc00;
 	data->vsa = i2c_new_dummy_device(client->adapter, client->addr + 1);
 	if (IS_ERR(data->vsa)) {
@@ -290,13 +346,6 @@ static int max16601_probe(struct i2c_client *client)
 	return pmbus_do_probe(client, &data->info);
 }
 
-static const struct i2c_device_id max16601_id[] = {
-	{"max16601", 0},
-	{}
-};
-
-MODULE_DEVICE_TABLE(i2c, max16601_id);
-
 static struct i2c_driver max16601_driver = {
 	.driver = {
 		   .name = "max16601",

drivers/hwmon/pmbus/max31785.c

@@ -17,6 +17,7 @@ enum max31785_regs {
 
 #define MAX31785			0x3030
 #define MAX31785A			0x3040
+#define MAX31785B			0x3061
 
 #define MFR_FAN_CONFIG_DUAL_TACH	BIT(12)
 
@@ -329,7 +330,7 @@ static int max31785_probe(struct i2c_client *client)
 	struct device *dev = &client->dev;
 	struct pmbus_driver_info *info;
 	bool dual_tach = false;
-	s64 ret;
+	int ret;
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_BYTE_DATA |
@@ -350,12 +351,14 @@ static int max31785_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
-	if (ret == MAX31785A) {
+	if (ret == MAX31785A || ret == MAX31785B) {
 		dual_tach = true;
 	} else if (ret == MAX31785) {
-		if (!strcmp("max31785a", client->name))
-			dev_warn(dev, "Expected max3175a, found max31785: cannot provide secondary tachometer readings\n");
+		if (!strcmp("max31785a", client->name) ||
+		    !strcmp("max31785b", client->name))
+			dev_warn(dev, "Expected max31785a/b, found max31785: cannot provide secondary tachometer readings\n");
 	} else {
+		dev_err(dev, "Unrecognized MAX31785 revision: %x\n", ret);
 		return -ENODEV;
 	}
 
@@ -371,6 +374,7 @@ static int max31785_probe(struct i2c_client *client)
 static const struct i2c_device_id max31785_id[] = {
 	{ "max31785", 0 },
 	{ "max31785a", 0 },
+	{ "max31785b", 0 },
 	{ },
 };
 
@@ -379,6 +383,7 @@ MODULE_DEVICE_TABLE(i2c, max31785_id);
 static const struct of_device_id max31785_of_match[] = {
 	{ .compatible = "maxim,max31785" },
 	{ .compatible = "maxim,max31785a" },
+	{ .compatible = "maxim,max31785b" },
 	{ },
 };
 

drivers/hwmon/pmbus/pmbus_core.c

@@ -974,7 +974,7 @@ static ssize_t pmbus_set_sensor(struct device *dev,
 	if (ret < 0)
 		rv = ret;
 	else
-		sensor->data = regval;
+		sensor->data = -ENODATA;
 	mutex_unlock(&data->update_lock);
 	return rv;
 }
@@ -1262,7 +1262,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 		 * which global bit is set) for this page is accessible.
 		 */
 		if (!ret && attr->gbit &&
-		    (!upper || (upper && data->has_status_word)) &&
+		    (!upper || data->has_status_word) &&
 		    pmbus_check_status_register(client, page)) {
 			ret = pmbus_add_boolean(data, name, "alarm", index,
 						NULL, NULL,
@@ -2204,9 +2204,11 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 	}
 
 	/* Enable PEC if the controller supports it */
+	if (!(data->flags & PMBUS_NO_CAPABILITY)) {
 		ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
 		if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
 			client->flags |= I2C_CLIENT_PEC;
+	}
 
 	/*
 	 * Check if the chip is write protected. If it is, we can not clear

drivers/hwmon/pwm-fan.c

@@ -21,15 +21,21 @@
 
 #define MAX_PWM 255
 
+struct pwm_fan_tach {
+	int irq;
+	atomic_t pulses;
+	unsigned int rpm;
+	u8 pulses_per_revolution;
+};
+
 struct pwm_fan_ctx {
 	struct mutex lock;
 	struct pwm_device *pwm;
+	struct pwm_state pwm_state;
 	struct regulator *reg_en;
 
-	int irq;
-	atomic_t pulses;
-	unsigned int rpm;
-	u8 pulses_per_revolution;
+	int tach_count;
+	struct pwm_fan_tach *tachs;
 	ktime_t sample_start;
 	struct timer_list rpm_timer;
 
@@ -40,6 +46,7 @@ struct pwm_fan_ctx {
 	struct thermal_cooling_device *cdev;
 
 	struct hwmon_chip_info info;
+	struct hwmon_channel_info fan_channel;
 };
 
 static const u32 pwm_fan_channel_config_pwm[] = {
@@ -52,22 +59,12 @@ static const struct hwmon_channel_info pwm_fan_channel_pwm = {
 	.config = pwm_fan_channel_config_pwm,
 };
 
-static const u32 pwm_fan_channel_config_fan[] = {
-	HWMON_F_INPUT,
-	0
-};
-
-static const struct hwmon_channel_info pwm_fan_channel_fan = {
-	.type = hwmon_fan,
-	.config = pwm_fan_channel_config_fan,
-};
-
 /* This handler assumes self resetting edge triggered interrupt. */
 static irqreturn_t pulse_handler(int irq, void *dev_id)
 {
-	struct pwm_fan_ctx *ctx = dev_id;
+	struct pwm_fan_tach *tach = dev_id;
 
-	atomic_inc(&ctx->pulses);
+	atomic_inc(&tach->pulses);
 
 	return IRQ_HANDLED;
 }
@@ -76,13 +73,18 @@ static void sample_timer(struct timer_list *t)
 {
 	struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer);
 	unsigned int delta = ktime_ms_delta(ktime_get(), ctx->sample_start);
-	int pulses;
+	int i;
 
 	if (delta) {
-		pulses = atomic_read(&ctx->pulses);
-		atomic_sub(pulses, &ctx->pulses);
-		ctx->rpm = (unsigned int)(pulses * 1000 * 60) /
-			(ctx->pulses_per_revolution * delta);
+		for (i = 0; i < ctx->tach_count; i++) {
+			struct pwm_fan_tach *tach = &ctx->tachs[i];
+			int pulses;
+
+			pulses = atomic_read(&tach->pulses);
+			atomic_sub(pulses, &tach->pulses);
+			tach->rpm = (unsigned int)(pulses * 1000 * 60) /
+				(tach->pulses_per_revolution * delta);
+		}
 
 		ctx->sample_start = ktime_get();
 	}
@@ -94,18 +96,17 @@ static int  __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
 {
 	unsigned long period;
 	int ret = 0;
-	struct pwm_state state = { };
+	struct pwm_state *state = &ctx->pwm_state;
 
 	mutex_lock(&ctx->lock);
 	if (ctx->pwm_value == pwm)
 		goto exit_set_pwm_err;
 
-	pwm_init_state(ctx->pwm, &state);
-	period = ctx->pwm->args.period;
-	state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
-	state.enabled = pwm ? true : false;
+	period = state->period;
+	state->duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
+	state->enabled = pwm ? true : false;
 
-	ret = pwm_apply_state(ctx->pwm, &state);
+	ret = pwm_apply_state(ctx->pwm, state);
 	if (!ret)
 		ctx->pwm_value = pwm;
 exit_set_pwm_err:
@@ -152,7 +153,7 @@ static int pwm_fan_read(struct device *dev, enum hwmon_sensor_types type,
 		return 0;
 
 	case hwmon_fan:
-		*val = ctx->rpm;
+		*val = ctx->tachs[channel].rpm;
 		return 0;
 
 	default:
@@ -287,7 +288,9 @@ static void pwm_fan_regulator_disable(void *data)
 static void pwm_fan_pwm_disable(void *__ctx)
 {
 	struct pwm_fan_ctx *ctx = __ctx;
-	pwm_disable(ctx->pwm);
+
+	ctx->pwm_state.enabled = false;
+	pwm_apply_state(ctx->pwm, &ctx->pwm_state);
 	del_timer_sync(&ctx->rpm_timer);
 }
 
@@ -298,9 +301,10 @@ static int pwm_fan_probe(struct platform_device *pdev)
 	struct pwm_fan_ctx *ctx;
 	struct device *hwmon;
 	int ret;
-	struct pwm_state state = { };
-	int tach_count;
 	const struct hwmon_channel_info **channels;
+	u32 *fan_channel_config;
+	int channel_count = 1;	/* We always have a PWM channel. */
+	int i;
 
 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -334,22 +338,20 @@ static int pwm_fan_probe(struct platform_device *pdev)
 
 	ctx->pwm_value = MAX_PWM;
 
-	pwm_init_state(ctx->pwm, &state);
+	pwm_init_state(ctx->pwm, &ctx->pwm_state);
+
 	/*
 	 * __set_pwm assumes that MAX_PWM * (period - 1) fits into an unsigned
 	 * long. Check this here to prevent the fan running at a too low
 	 * frequency.
 	 */
-	if (state.period > ULONG_MAX / MAX_PWM + 1) {
+	if (ctx->pwm_state.period > ULONG_MAX / MAX_PWM + 1) {
 		dev_err(dev, "Configured period too big\n");
 		return -EINVAL;
 	}
 
 	/* Set duty cycle to maximum allowed and enable PWM output */
-	state.duty_cycle = ctx->pwm->args.period - 1;
-	state.enabled = true;
-
-	ret = pwm_apply_state(ctx->pwm, &state);
+	ret = __set_pwm(ctx, MAX_PWM);
 	if (ret) {
 		dev_err(dev, "Failed to configure PWM: %d\n", ret);
 		return ret;
@@ -359,27 +361,46 @@ static int pwm_fan_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	tach_count = platform_irq_count(pdev);
-	if (tach_count < 0)
-		return dev_err_probe(dev, tach_count,
+	ctx->tach_count = platform_irq_count(pdev);
+	if (ctx->tach_count < 0)
+		return dev_err_probe(dev, ctx->tach_count,
 				     "Could not get number of fan tachometer inputs\n");
+	dev_dbg(dev, "%d fan tachometer inputs\n", ctx->tach_count);
 
-	channels = devm_kcalloc(dev, tach_count + 2,
+	if (ctx->tach_count) {
+		channel_count++;	/* We also have a FAN channel. */
+
+		ctx->tachs = devm_kcalloc(dev, ctx->tach_count,
+					  sizeof(struct pwm_fan_tach),
+					  GFP_KERNEL);
+		if (!ctx->tachs)
+			return -ENOMEM;
+
+		ctx->fan_channel.type = hwmon_fan;
+		fan_channel_config = devm_kcalloc(dev, ctx->tach_count + 1,
+						  sizeof(u32), GFP_KERNEL);
+		if (!fan_channel_config)
+			return -ENOMEM;
+		ctx->fan_channel.config = fan_channel_config;
+	}
+
+	channels = devm_kcalloc(dev, channel_count + 1,
 				sizeof(struct hwmon_channel_info *), GFP_KERNEL);
 	if (!channels)
 		return -ENOMEM;
 
 	channels[0] = &pwm_fan_channel_pwm;
 
-	if (tach_count > 0) {
+	for (i = 0; i < ctx->tach_count; i++) {
+		struct pwm_fan_tach *tach = &ctx->tachs[i];
 		u32 ppr = 2;
 
-		ctx->irq = platform_get_irq(pdev, 0);
-		if (ctx->irq == -EPROBE_DEFER)
-			return ctx->irq;
-		if (ctx->irq > 0) {
-			ret = devm_request_irq(dev, ctx->irq, pulse_handler, 0,
-					       pdev->name, ctx);
+		tach->irq = platform_get_irq(pdev, i);
+		if (tach->irq == -EPROBE_DEFER)
+			return tach->irq;
+		if (tach->irq > 0) {
+			ret = devm_request_irq(dev, tach->irq, pulse_handler, 0,
+					       pdev->name, tach);
 			if (ret) {
 				dev_err(dev,
 					"Failed to request interrupt: %d\n",
@@ -388,22 +409,27 @@ static int pwm_fan_probe(struct platform_device *pdev)
 			}
 		}
 
-		of_property_read_u32(dev->of_node,
+		of_property_read_u32_index(dev->of_node,
 					   "pulses-per-revolution",
+					   i,
 					   &ppr);
-		ctx->pulses_per_revolution = ppr;
-		if (!ctx->pulses_per_revolution) {
+		tach->pulses_per_revolution = ppr;
+		if (!tach->pulses_per_revolution) {
 			dev_err(dev, "pulses-per-revolution can't be zero.\n");
 			return -EINVAL;
 		}
 
-		dev_dbg(dev, "tach: irq=%d, pulses_per_revolution=%d\n",
-			ctx->irq, ctx->pulses_per_revolution);
+		fan_channel_config[i] = HWMON_F_INPUT;
 
+		dev_dbg(dev, "tach%d: irq=%d, pulses_per_revolution=%d\n",
+			i, tach->irq, tach->pulses_per_revolution);
+	}
+
+	if (ctx->tach_count > 0) {
 		ctx->sample_start = ktime_get();
 		mod_timer(&ctx->rpm_timer, jiffies + HZ);
 
-		channels[1] = &pwm_fan_channel_fan;
+		channels[1] = &ctx->fan_channel;
 	}
 
 	ctx->info.ops = &pwm_fan_hwmon_ops;
@@ -441,17 +467,17 @@ static int pwm_fan_probe(struct platform_device *pdev)
 static int pwm_fan_disable(struct device *dev)
 {
 	struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
-	struct pwm_args args;
 	int ret;
 
-	pwm_get_args(ctx->pwm, &args);
-
 	if (ctx->pwm_value) {
-		ret = pwm_config(ctx->pwm, 0, args.period);
+		/* keep ctx->pwm_state unmodified for pwm_fan_resume() */
+		struct pwm_state state = ctx->pwm_state;
+
+		state.duty_cycle = 0;
+		state.enabled = false;
+		ret = pwm_apply_state(ctx->pwm, &state);
 		if (ret < 0)
 			return ret;
-
-		pwm_disable(ctx->pwm);
 	}
 
 	if (ctx->reg_en) {
@@ -479,8 +505,6 @@ static int pwm_fan_suspend(struct device *dev)
 static int pwm_fan_resume(struct device *dev)
 {
 	struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
-	struct pwm_args pargs;
-	unsigned long duty;
 	int ret;
 
 	if (ctx->reg_en) {
@@ -494,12 +518,7 @@ static int pwm_fan_resume(struct device *dev)
 	if (ctx->pwm_value == 0)
 		return 0;
 
-	pwm_get_args(ctx->pwm, &pargs);
-	duty = DIV_ROUND_UP_ULL(ctx->pwm_value * (pargs.period - 1), MAX_PWM);
-	ret = pwm_config(ctx->pwm, duty, pargs.period);
-	if (ret)
-		return ret;
-	return pwm_enable(ctx->pwm);
+	return pwm_apply_state(ctx->pwm, &ctx->pwm_state);
 }
 #endif
 

drivers/hwmon/smsc47m1.c

@@ -682,7 +682,7 @@ static int __init smsc47m1_handle_resources(unsigned short address,
 			/* Request the resources */
 			if (!devm_request_region(dev, start, len, DRVNAME)) {
 				dev_err(dev,
-					"Region 0x%hx-0x%hx already in use!\n",
+					"Region 0x%x-0x%x already in use!\n",
 					start, start + len);
 				return -EBUSY;
 			}

drivers/hwmon/tps23861.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Driver for the TI TPS23861 PoE PSE.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define TEMPERATURE			0x2c
+#define INPUT_VOLTAGE_LSB		0x2e
+#define INPUT_VOLTAGE_MSB		0x2f
+#define PORT_1_CURRENT_LSB		0x30
+#define PORT_1_CURRENT_MSB		0x31
+#define PORT_1_VOLTAGE_LSB		0x32
+#define PORT_1_VOLTAGE_MSB		0x33
+#define PORT_2_CURRENT_LSB		0x34
+#define PORT_2_CURRENT_MSB		0x35
+#define PORT_2_VOLTAGE_LSB		0x36
+#define PORT_2_VOLTAGE_MSB		0x37
+#define PORT_3_CURRENT_LSB		0x38
+#define PORT_3_CURRENT_MSB		0x39
+#define PORT_3_VOLTAGE_LSB		0x3a
+#define PORT_3_VOLTAGE_MSB		0x3b
+#define PORT_4_CURRENT_LSB		0x3c
+#define PORT_4_CURRENT_MSB		0x3d
+#define PORT_4_VOLTAGE_LSB		0x3e
+#define PORT_4_VOLTAGE_MSB		0x3f
+#define PORT_N_CURRENT_LSB_OFFSET	0x04
+#define PORT_N_VOLTAGE_LSB_OFFSET	0x04
+#define VOLTAGE_CURRENT_MASK		GENMASK(13, 0)
+#define PORT_1_RESISTANCE_LSB		0x60
+#define PORT_1_RESISTANCE_MSB		0x61
+#define PORT_2_RESISTANCE_LSB		0x62
+#define PORT_2_RESISTANCE_MSB		0x63
+#define PORT_3_RESISTANCE_LSB		0x64
+#define PORT_3_RESISTANCE_MSB		0x65
+#define PORT_4_RESISTANCE_LSB		0x66
+#define PORT_4_RESISTANCE_MSB		0x67
+#define PORT_N_RESISTANCE_LSB_OFFSET	0x02
+#define PORT_RESISTANCE_MASK		GENMASK(13, 0)
+#define PORT_RESISTANCE_RSN_MASK	GENMASK(15, 14)
+#define PORT_RESISTANCE_RSN_OTHER	0
+#define PORT_RESISTANCE_RSN_LOW		1
+#define PORT_RESISTANCE_RSN_OPEN	2
+#define PORT_RESISTANCE_RSN_SHORT	3
+#define PORT_1_STATUS			0x0c
+#define PORT_2_STATUS			0x0d
+#define PORT_3_STATUS			0x0e
+#define PORT_4_STATUS			0x0f
+#define PORT_STATUS_CLASS_MASK		GENMASK(7, 4)
+#define PORT_STATUS_DETECT_MASK		GENMASK(3, 0)
+#define PORT_CLASS_UNKNOWN		0
+#define PORT_CLASS_1			1
+#define PORT_CLASS_2			2
+#define PORT_CLASS_3			3
+#define PORT_CLASS_4			4
+#define PORT_CLASS_RESERVED		5
+#define PORT_CLASS_0			6
+#define PORT_CLASS_OVERCURRENT		7
+#define PORT_CLASS_MISMATCH		8
+#define PORT_DETECT_UNKNOWN		0
+#define PORT_DETECT_SHORT		1
+#define PORT_DETECT_RESERVED		2
+#define PORT_DETECT_RESISTANCE_LOW	3
+#define PORT_DETECT_RESISTANCE_OK	4
+#define PORT_DETECT_RESISTANCE_HIGH	5
+#define PORT_DETECT_OPEN_CIRCUIT	6
+#define PORT_DETECT_RESERVED_2		7
+#define PORT_DETECT_MOSFET_FAULT	8
+#define PORT_DETECT_LEGACY		9
+/* Measurment beyond clamp voltage */
+#define PORT_DETECT_CAPACITANCE_INVALID_BEYOND	10
+/* Insufficient voltage delta */
+#define PORT_DETECT_CAPACITANCE_INVALID_DELTA	11
+#define PORT_DETECT_CAPACITANCE_OUT_OF_RANGE	12
+#define POE_PLUS			0x40
+#define OPERATING_MODE			0x12
+#define OPERATING_MODE_OFF		0
+#define OPERATING_MODE_MANUAL		1
+#define OPERATING_MODE_SEMI		2
+#define OPERATING_MODE_AUTO		3
+#define OPERATING_MODE_PORT_1_MASK	GENMASK(1, 0)
+#define OPERATING_MODE_PORT_2_MASK	GENMASK(3, 2)
+#define OPERATING_MODE_PORT_3_MASK	GENMASK(5, 4)
+#define OPERATING_MODE_PORT_4_MASK	GENMASK(7, 6)
+
+#define DETECT_CLASS_RESTART		0x18
+#define POWER_ENABLE			0x19
+#define TPS23861_NUM_PORTS		4
+
+#define TEMPERATURE_LSB			652 /* 0.652 degrees Celsius */
+#define VOLTAGE_LSB			3662 /* 3.662 mV */
+#define SHUNT_RESISTOR_DEFAULT		255000 /* 255 mOhm */
+#define CURRENT_LSB_255			62260 /* 62.260 uA */
+#define CURRENT_LSB_250			61039 /* 61.039 uA */
+#define RESISTANCE_LSB			110966 /* 11.0966 Ohm*/
+#define RESISTANCE_LSB_LOW		157216 /* 15.7216 Ohm*/
+
+struct tps23861_data {
+	struct regmap *regmap;
+	u32 shunt_resistor;
+	struct i2c_client *client;
+	struct dentry *debugfs_dir;
+};
+
+static struct regmap_config tps23861_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int tps23861_read_temp(struct tps23861_data *data, long *val)
+{
+	unsigned int regval;
+	int err;
+
+	err = regmap_read(data->regmap, TEMPERATURE, &regval);
+	if (err < 0)
+		return err;
+
+	*val = (regval * TEMPERATURE_LSB) - 20000;
+
+	return 0;
+}
+
+static int tps23861_read_voltage(struct tps23861_data *data, int channel,
+				 long *val)
+{
+	unsigned int regval;
+	int err;
+
+	if (channel < TPS23861_NUM_PORTS) {
+		err = regmap_bulk_read(data->regmap,
+				       PORT_1_VOLTAGE_LSB + channel * PORT_N_VOLTAGE_LSB_OFFSET,
+				       &regval, 2);
+	} else {
+		err = regmap_bulk_read(data->regmap,
+				       INPUT_VOLTAGE_LSB,
+				       &regval, 2);
+	}
+	if (err < 0)
+		return err;
+
+	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * VOLTAGE_LSB) / 1000;
+
+	return 0;
+}
+
+static int tps23861_read_current(struct tps23861_data *data, int channel,
+				 long *val)
+{
+	unsigned int current_lsb;
+	unsigned int regval;
+	int err;
+
+	if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
+		current_lsb = CURRENT_LSB_255;
+	else
+		current_lsb = CURRENT_LSB_250;
+
+	err = regmap_bulk_read(data->regmap,
+			       PORT_1_CURRENT_LSB + channel * PORT_N_CURRENT_LSB_OFFSET,
+			       &regval, 2);
+	if (err < 0)
+		return err;
+
+	*val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * current_lsb) / 1000000;
+
+	return 0;
+}
+
+static int tps23861_port_disable(struct tps23861_data *data, int channel)
+{
+	unsigned int regval = 0;
+	int err;
+
+	regval |= BIT(channel + 4);
+	err = regmap_write(data->regmap, POWER_ENABLE, regval);
+
+	return err;
+}
+
+static int tps23861_port_enable(struct tps23861_data *data, int channel)
+{
+	unsigned int regval = 0;
+	int err;
+
+	regval |= BIT(channel);
+	regval |= BIT(channel + 4);
+	err = regmap_write(data->regmap, DETECT_CLASS_RESTART, regval);
+
+	return err;
+}
+
+static umode_t tps23861_is_visible(const void *data, enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+		case hwmon_temp_label:
+			return 0444;
+		default:
+			return 0;
+		}
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+		case hwmon_in_label:
+			return 0444;
+		case hwmon_in_enable:
+			return 0200;
+		default:
+			return 0;
+		}
+	case hwmon_curr:
+		switch (attr) {
+		case hwmon_curr_input:
+		case hwmon_curr_label:
+			return 0444;
+		default:
+			return 0;
+		}
+	default:
+		return 0;
+	}
+}
+
+static int tps23861_write(struct device *dev, enum hwmon_sensor_types type,
+			  u32 attr, int channel, long val)
+{
+	struct tps23861_data *data = dev_get_drvdata(dev);
+	int err;
+
+	switch (type) {
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_enable:
+			if (val == 0)
+				err = tps23861_port_disable(data, channel);
+			else if (val == 1)
+				err = tps23861_port_enable(data, channel);
+			else
+				err = -EINVAL;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return err;
+}
+
+static int tps23861_read(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long *val)
+{
+	struct tps23861_data *data = dev_get_drvdata(dev);
+	int err;
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+			err = tps23861_read_temp(data, val);
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+			err = tps23861_read_voltage(data, channel, val);
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	case hwmon_curr:
+		switch (attr) {
+		case hwmon_curr_input:
+			err = tps23861_read_current(data, channel, val);
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return err;
+}
+
+static const char * const tps23861_port_label[] = {
+	"Port1",
+	"Port2",
+	"Port3",
+	"Port4",
+	"Input",
+};
+
+static int tps23861_read_string(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_in:
+	case hwmon_curr:
+		*str = tps23861_port_label[channel];
+		break;
+	case hwmon_temp:
+		*str = "Die";
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static const struct hwmon_channel_info *tps23861_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_ENABLE | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops tps23861_hwmon_ops = {
+	.is_visible = tps23861_is_visible,
+	.write = tps23861_write,
+	.read = tps23861_read,
+	.read_string = tps23861_read_string,
+};
+
+static const struct hwmon_chip_info tps23861_chip_info = {
+	.ops = &tps23861_hwmon_ops,
+	.info = tps23861_info,
+};
+
+static char *tps23861_port_operating_mode(struct tps23861_data *data, int port)
+{
+	unsigned int regval;
+	int mode;
+
+	regmap_read(data->regmap, OPERATING_MODE, &regval);
+
+	switch (port) {
+	case 1:
+		mode = FIELD_GET(OPERATING_MODE_PORT_1_MASK, regval);
+		break;
+	case 2:
+		mode = FIELD_GET(OPERATING_MODE_PORT_2_MASK, regval);
+		break;
+	case 3:
+		mode = FIELD_GET(OPERATING_MODE_PORT_3_MASK, regval);
+		break;
+	case 4:
+		mode = FIELD_GET(OPERATING_MODE_PORT_4_MASK, regval);
+		break;
+	default:
+		mode = -EINVAL;
+	}
+
+	switch (mode) {
+	case OPERATING_MODE_OFF:
+		return "Off";
+	case OPERATING_MODE_MANUAL:
+		return "Manual";
+	case OPERATING_MODE_SEMI:
+		return "Semi-Auto";
+	case OPERATING_MODE_AUTO:
+		return "Auto";
+	default:
+		return "Invalid";
+	}
+}
+
+static char *tps23861_port_detect_status(struct tps23861_data *data, int port)
+{
+	unsigned int regval;
+
+	regmap_read(data->regmap,
+		    PORT_1_STATUS + (port - 1),
+		    &regval);
+
+	switch (FIELD_GET(PORT_STATUS_DETECT_MASK, regval)) {
+	case PORT_DETECT_UNKNOWN:
+		return "Unknown device";
+	case PORT_DETECT_SHORT:
+		return "Short circuit";
+	case PORT_DETECT_RESISTANCE_LOW:
+		return "Too low resistance";
+	case PORT_DETECT_RESISTANCE_OK:
+		return "Valid resistance";
+	case PORT_DETECT_RESISTANCE_HIGH:
+		return "Too high resistance";
+	case PORT_DETECT_OPEN_CIRCUIT:
+		return "Open circuit";
+	case PORT_DETECT_MOSFET_FAULT:
+		return "MOSFET fault";
+	case PORT_DETECT_LEGACY:
+		return "Legacy device";
+	case PORT_DETECT_CAPACITANCE_INVALID_BEYOND:
+		return "Invalid capacitance, beyond clamp voltage";
+	case PORT_DETECT_CAPACITANCE_INVALID_DELTA:
+		return "Invalid capacitance, insufficient voltage delta";
+	case PORT_DETECT_CAPACITANCE_OUT_OF_RANGE:
+		return "Valid capacitance, outside of legacy range";
+	case PORT_DETECT_RESERVED:
+	case PORT_DETECT_RESERVED_2:
+	default:
+		return "Invalid";
+	}
+}
+
+static char *tps23861_port_class_status(struct tps23861_data *data, int port)
+{
+	unsigned int regval;
+
+	regmap_read(data->regmap,
+		    PORT_1_STATUS + (port - 1),
+		    &regval);
+
+	switch (FIELD_GET(PORT_STATUS_CLASS_MASK, regval)) {
+	case PORT_CLASS_UNKNOWN:
+		return "Unknown";
+	case PORT_CLASS_RESERVED:
+	case PORT_CLASS_0:
+		return "0";
+	case PORT_CLASS_1:
+		return "1";
+	case PORT_CLASS_2:
+		return "2";
+	case PORT_CLASS_3:
+		return "3";
+	case PORT_CLASS_4:
+		return "4";
+	case PORT_CLASS_OVERCURRENT:
+		return "Overcurrent";
+	case PORT_CLASS_MISMATCH:
+		return "Mismatch";
+	default:
+		return "Invalid";
+	}
+}
+
+static char *tps23861_port_poe_plus_status(struct tps23861_data *data, int port)
+{
+	unsigned int regval;
+
+	regmap_read(data->regmap, POE_PLUS, &regval);
+
+	if (BIT(port + 3) & regval)
+		return "Yes";
+	else
+		return "No";
+}
+
+static int tps23861_port_resistance(struct tps23861_data *data, int port)
+{
+	u16 regval;
+
+	regmap_bulk_read(data->regmap,
+			 PORT_1_RESISTANCE_LSB + PORT_N_RESISTANCE_LSB_OFFSET * (port - 1),
+			 &regval,
+			 2);
+
+	switch (FIELD_GET(PORT_RESISTANCE_RSN_MASK, regval)) {
+	case PORT_RESISTANCE_RSN_OTHER:
+		return (FIELD_GET(PORT_RESISTANCE_MASK, regval) * RESISTANCE_LSB) / 10000;
+	case PORT_RESISTANCE_RSN_LOW:
+		return (FIELD_GET(PORT_RESISTANCE_MASK, regval) * RESISTANCE_LSB_LOW) / 10000;
+	case PORT_RESISTANCE_RSN_SHORT:
+	case PORT_RESISTANCE_RSN_OPEN:
+	default:
+		return 0;
+	}
+}
+
+static int tps23861_port_status_show(struct seq_file *s, void *data)
+{
+	struct tps23861_data *priv = s->private;
+	int i;
+
+	for (i = 1; i < TPS23861_NUM_PORTS + 1; i++) {
+		seq_printf(s, "Port: \t\t%d\n", i);
+		seq_printf(s, "Operating mode: %s\n", tps23861_port_operating_mode(priv, i));
+		seq_printf(s, "Detected: \t%s\n", tps23861_port_detect_status(priv, i));
+		seq_printf(s, "Class: \t\t%s\n", tps23861_port_class_status(priv, i));
+		seq_printf(s, "PoE Plus: \t%s\n", tps23861_port_poe_plus_status(priv, i));
+		seq_printf(s, "Resistance: \t%d\n", tps23861_port_resistance(priv, i));
+		seq_putc(s, '\n');
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tps23861_port_status);
+
+static void tps23861_init_debugfs(struct tps23861_data *data)
+{
+	data->debugfs_dir = debugfs_create_dir(data->client->name, NULL);
+
+	debugfs_create_file("port_status",
+			    0400,
+			    data->debugfs_dir,
+			    data,
+			    &tps23861_port_status_fops);
+}
+
+static int tps23861_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct tps23861_data *data;
+	struct device *hwmon_dev;
+	u32 shunt_resistor;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	data->regmap = devm_regmap_init_i2c(client, &tps23861_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	if (!of_property_read_u32(dev->of_node, "shunt-resistor-micro-ohms", &shunt_resistor))
+		data->shunt_resistor = shunt_resistor;
+	else
+		data->shunt_resistor = SHUNT_RESISTOR_DEFAULT;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+							 data, &tps23861_chip_info,
+							 NULL);
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	tps23861_init_debugfs(data);
+
+	return 0;
+}
+
+static int tps23861_remove(struct i2c_client *client)
+{
+	struct tps23861_data *data = i2c_get_clientdata(client);
+
+	debugfs_remove_recursive(data->debugfs_dir);
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused tps23861_of_match[] = {
+	{ .compatible = "ti,tps23861", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tps23861_of_match);
+
+static struct i2c_driver tps23861_driver = {
+	.probe_new		= tps23861_probe,
+	.remove			= tps23861_remove,
+	.driver = {
+		.name		= "tps23861",
+		.of_match_table	= of_match_ptr(tps23861_of_match),
+	},
+};
+module_i2c_driver(tps23861_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("TI TPS23861 PoE PSE");

drivers/hwmon/w83627ehf.c

@@ -1110,7 +1110,7 @@ clear_caseopen(struct device *dev, struct w83627ehf_data *data, int channel,
 static umode_t w83627ehf_attrs_visible(struct kobject *kobj,
 				       struct attribute *a, int n)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct device_attribute *devattr;
 	struct sensor_device_attribute *sda;

include/linux/pmbus.h

@@ -34,6 +34,15 @@
  */
 #define PMBUS_WRITE_PROTECTED	BIT(1)
 
+/*
+ * PMBUS_NO_CAPABILITY
+ *
+ * Some PMBus chips don't respond with valid data when reading the CAPABILITY
+ * register. For such chips, this flag should be set so that the PMBus core
+ * driver doesn't use CAPABILITY to determine it's behavior.
+ */
+#define PMBUS_NO_CAPABILITY			BIT(2)
+
 struct pmbus_platform_data {
 	u32 flags;		/* Device specific flags */