Merge branch 'topic/misc' into for-linus

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1812,7 +1812,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-ua101
   ----------------
 
-    Module for the Edirol UA-101 audio/MIDI interface.
+    Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
 
     This module supports multiple devices, autoprobe and hotplugging.
 

include/linux/usb/audio.h

@@ -269,8 +269,8 @@ struct uac_format_type_i_ext_descriptor {
 	__u8 bLength;
 	__u8 bDescriptorType;
 	__u8 bDescriptorSubtype;
-	__u8 bSubslotSize;
 	__u8 bFormatType;
+	__u8 bSubslotSize;
 	__u8 bBitResolution;
 	__u8 bHeaderLength;
 	__u8 bControlSize;

include/sound/asound.h

@@ -544,7 +544,7 @@ struct snd_rawmidi_status {
  *  Timer section - /dev/snd/timer
  */
 
-#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 5)
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
 
 enum {
 	SNDRV_TIMER_CLASS_NONE = -1,

sound/core/timer.c

@@ -393,7 +393,7 @@ static void snd_timer_notify1(struct snd_timer_instance *ti, int event)
 	    event == SNDRV_TIMER_EVENT_CONTINUE)
 		resolution = snd_timer_resolution(ti);
 	if (ti->ccallback)
-		ti->ccallback(ti, SNDRV_TIMER_EVENT_START, &tstamp, resolution);
+		ti->ccallback(ti, event, &tstamp, resolution);
 	if (ti->flags & SNDRV_TIMER_IFLG_SLAVE)
 		return;
 	timer = ti->timer;

sound/isa/opti9xx/miro.c

@@ -1558,7 +1558,7 @@ static int __devinit snd_card_miro_pnp(struct snd_miro *chip,
 
 	err = pnp_activate_dev(devmc);
 	if (err < 0) {
-		snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
+		snd_printk(KERN_ERR "MC pnp configure failure: %d\n",
 				    err);
 		return err;
 	}

sound/isa/opti9xx/opti92x-ad1848.c

@@ -144,12 +144,8 @@ struct snd_opti9xx {
 
 	spinlock_t lock;
 
+	long wss_base;
 	int irq;
-
-#ifdef CONFIG_PNP
-	struct pnp_dev *dev;
-	struct pnp_dev *devmpu;
-#endif	/* CONFIG_PNP */
 };
 
 static int snd_opti9xx_pnp_is_probed;
@@ -159,12 +155,17 @@ static int snd_opti9xx_pnp_is_probed;
 static struct pnp_card_device_id snd_opti9xx_pnpids[] = {
 #ifndef OPTi93X
 	/* OPTi 82C924 */
-	{ .id = "OPT0924", .devs = { { "OPT0000" }, { "OPT0002" } }, .driver_data = 0x0924 },
+	{ .id = "OPT0924",
+	  .devs = { { "OPT0000" }, { "OPT0002" }, { "OPT0005" } },
+	  .driver_data = 0x0924 },
 	/* OPTi 82C925 */
-	{ .id = "OPT0925", .devs = { { "OPT9250" }, { "OPT0002" } }, .driver_data = 0x0925 },
+	{ .id = "OPT0925",
+	  .devs = { { "OPT9250" }, { "OPT0002" }, { "OPT0005" } },
+	  .driver_data = 0x0925 },
 #else
 	/* OPTi 82C931/3 */
-	{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } }, .driver_data = 0x0931 },
+	{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } },
+	  .driver_data = 0x0931 },
 #endif	/* OPTi93X */
 	{ .id = "" }
 };
@@ -207,24 +208,34 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
 	chip->hardware = hardware;
 	strcpy(chip->name, snd_opti9xx_names[hardware]);
 
-	chip->mc_base_size = opti9xx_mc_size[hardware];  
-
 	spin_lock_init(&chip->lock);
 
 	chip->irq = -1;
 
+#ifndef OPTi93X
+#ifdef CONFIG_PNP
+	if (isapnp && chip->mc_base)
+		/* PnP resource gives the least 10 bits */
+		chip->mc_base |= 0xc00;
+#endif	/* CONFIG_PNP */
+	else {
+		chip->mc_base = 0xf8c;
+		chip->mc_base_size = opti9xx_mc_size[hardware];
+	}
+#else
+		chip->mc_base_size = opti9xx_mc_size[hardware];
+#endif
+
 	switch (hardware) {
 #ifndef OPTi93X
 	case OPTi9XX_HW_82C928:
 	case OPTi9XX_HW_82C929:
-		chip->mc_base = 0xf8c;
 		chip->password = (hardware == OPTi9XX_HW_82C928) ? 0xe2 : 0xe3;
 		chip->pwd_reg = 3;
 		break;
 
 	case OPTi9XX_HW_82C924:
 	case OPTi9XX_HW_82C925:
-		chip->mc_base = 0xf8c;
 		chip->password = 0xe5;
 		chip->pwd_reg = 3;
 		break;
@@ -341,7 +352,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 
 
 static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
-					   long wss_base,
+					   long port,
 					   int irq, int dma1, int dma2,
 					   long mpu_port, int mpu_irq)
 {
@@ -354,16 +365,23 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 	switch (chip->hardware) {
 #ifndef OPTi93X
 	case OPTi9XX_HW_82C924:
+		/* opti 929 mode (?), OPL3 clock output, audio enable */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0xf0, 0xfc);
+		/* enable wave audio */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
 
 	case OPTi9XX_HW_82C925:
+		/* enable WSS mode */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+		/* OPL3 FM synthesis */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x00, 0x20);
+		/* disable Sound Blaster IRQ and DMA */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
 #ifdef CS4231
+		/* cs4231/4248 fix enabled */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
 #else
+		/* cs4231/4248 fix disabled */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x00, 0x02);
 #endif	/* CS4231 */
 		break;
@@ -411,21 +429,26 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 		return -EINVAL;
 	}
 
-	switch (wss_base) {
-	case 0x530:
+	/* PnP resource says it decodes only 10 bits of address */
+	switch (port & 0x3ff) {
+	case 0x130:
+		chip->wss_base = 0x530;
 		wss_base_bits = 0x00;
 		break;
-	case 0x604:
+	case 0x204:
+		chip->wss_base = 0x604;
 		wss_base_bits = 0x03;
 		break;
-	case 0xe80:
+	case 0x280:
+		chip->wss_base = 0xe80;
 		wss_base_bits = 0x01;
 		break;
-	case 0xf40:
+	case 0x340:
+		chip->wss_base = 0xf40;
 		wss_base_bits = 0x02;
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
+		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", port);
 		goto __skip_base;
 	}
 	snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
@@ -487,7 +510,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 #endif	/* CS4231 || OPTi93X */
 
 #ifndef OPTi93X
-	 outb(irq_bits << 3 | dma_bits, wss_base);
+	 outb(irq_bits << 3 | dma_bits, chip->wss_base);
 #else /* OPTi93X */
 	snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
 #endif /* OPTi93X */
@@ -729,15 +752,15 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 {
 	struct pnp_dev *pdev;
 	int err;
+	struct pnp_dev *devmpu;
+#ifndef OPTi93X
+	struct pnp_dev *devmc;
+#endif
 
-	chip->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
-	if (chip->dev == NULL)
+	pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
+	if (pdev == NULL)
 		return -EBUSY;
 
-	chip->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
-
-	pdev = chip->dev;
-
 	err = pnp_activate_dev(pdev);
 	if (err < 0) {
 		snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
@@ -750,9 +773,24 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 	chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
 	chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
 #else
-	if (pid->driver_data != 0x0924)
+	devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
+	if (devmc == NULL)
+		return -EBUSY;
+
+	err = pnp_activate_dev(devmc);
+	if (err < 0) {
+		snd_printk(KERN_ERR "MC pnp configure failure: %d\n", err);
+		return err;
+	}
+
 	port = pnp_port_start(pdev, 1);
 	fm_port = pnp_port_start(pdev, 2) + 8;
+	/*
+	 * The MC(0) is never accessed and card does not
+	 * include it in the PnP resource range. OPTI93x include it.
+	 */
+	chip->mc_base = pnp_port_start(devmc, 0) - 1;
+	chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
 #endif	/* OPTi93X */
 	irq = pnp_irq(pdev, 0);
 	dma1 = pnp_dma(pdev, 0);
@@ -760,16 +798,16 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 	dma2 = pnp_dma(pdev, 1);
 #endif	/* CS4231 || OPTi93X */
 
-	pdev = chip->devmpu;
-	if (pdev && mpu_port > 0) {
-		err = pnp_activate_dev(pdev);
+	devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
+
+	if (devmpu && mpu_port > 0) {
+		err = pnp_activate_dev(devmpu);
 		if (err < 0) {
-			snd_printk(KERN_ERR "AUDIO pnp configure failure\n");
+			snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
 			mpu_port = -1;
-			chip->devmpu = NULL;
 		} else {
-			mpu_port = pnp_port_start(pdev, 0);
-			mpu_irq = pnp_irq(pdev, 0);
+			mpu_port = pnp_port_start(devmpu, 0);
+			mpu_irq = pnp_irq(devmpu, 0);
 		}
 	}
 	return pid->driver_data;
@@ -824,7 +862,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 	if (error)
 		return error;
 
-	error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
+	error = snd_wss_create(card, chip->wss_base + 4, -1, irq, dma1, xdma2,
 #ifdef OPTi93X
 			       WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
 #else
@@ -865,10 +903,11 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 	sprintf(card->shortname, "OPTi %s", card->driver);
 #if defined(CS4231) || defined(OPTi93X)
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
-		card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
+		card->shortname, pcm->name,
+		chip->wss_base + 4, irq, dma1, xdma2);
 #else
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
-		card->shortname, pcm->name, port + 4, irq, dma1);
+		card->shortname, pcm->name, chip->wss_base + 4, irq, dma1);
 #endif	/* CS4231 || OPTi93X */
 
 	if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
@@ -1062,9 +1101,6 @@ static int __devinit snd_opti9xx_pnp_probe(struct pnp_card_link *pcard,
 		snd_card_free(card);
 		return error;
 	}
-	if (hw <= OPTi9XX_HW_82C930)
-		chip->mc_base -= 0x80;
-
 	error = snd_opti9xx_read_check(chip);
 	if (error) {
 		snd_printk(KERN_ERR "OPTI chip not found\n");

sound/isa/sb/jazz16.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 #include <asm/dma.h>
 #include <linux/isa.h>
 #include <sound/core.h>

sound/oss/v_midi.h

@@ -12,4 +12,3 @@ typedef struct vmidi_devc {
 	   int intr_active;
 	   void (*midi_input_intr) (int dev, unsigned char data);
 	} vmidi_devc;
-

sound/pci/oxygen/xonar_wm87x6.c

@@ -68,7 +68,7 @@ static void wm8776_write(struct oxygen *chip,
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
 			 (reg << 9) | value);
 	if (reg < ARRAY_SIZE(data->wm8776_regs)) {
-		if (reg >= WM8776_HPLVOL || reg <= WM8776_DACMASTER)
+		if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER)
 			value &= ~WM8776_UPDATE;
 		data->wm8776_regs[reg] = value;
 	}

sound/pci/riptide/riptide.c

@@ -1974,9 +1974,9 @@ snd_riptide_proc_read(struct snd_info_entry *entry,
 	}
 	snd_iprintf(buffer, "Paths:\n");
 	i = getpaths(cif, p);
-	while (i--) {
-		snd_iprintf(buffer, "%x->%x ", p[i - 1], p[i]);
-		i--;
+	while (i >= 2) {
+		i -= 2;
+		snd_iprintf(buffer, "%x->%x ", p[i], p[i + 1]);
 	}
 	snd_iprintf(buffer, "\n");
 }

sound/usb/Kconfig

@@ -22,13 +22,13 @@ config SND_USB_AUDIO
 	  will be called snd-usb-audio.
 
 config SND_USB_UA101
-	tristate "Edirol UA-101 driver (EXPERIMENTAL)"
+	tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select SND_PCM
 	select SND_RAWMIDI
 	help
-	  Say Y here to include support for the Edirol UA-101 audio/MIDI
-	  interface.
+	  Say Y here to include support for the Edirol UA-101 and UA-1000
+	  audio/MIDI interfaces.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-ua101.

sound/usb/caiaq/midi.h

@@ -3,6 +3,6 @@
 
 int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
 void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
-void snd_usb_caiaq_midi_output_done(struct urb* urb);
+void snd_usb_caiaq_midi_output_done(struct urb *urb);
 
 #endif /* CAIAQ_MIDI_H */

sound/usb/ua101.c

 /*
- * Edirol UA-101 driver
+ * Edirol UA-101/UA-1000 driver
  * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
  *
  * This driver is free software: you can redistribute it and/or modify
@@ -25,13 +25,10 @@
 #include <sound/pcm_params.h>
 #include "usbaudio.h"
 
-MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
-
-/* I use my UA-1A for testing because I don't have a UA-101 ... */
-#define UA1A_HACK
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
 
 /*
  * Should not be lower than the minimum scheduling delay of the host
@@ -132,9 +129,6 @@ struct ua101 {
 			dma_addr_t dma;
 		} buffers[MAX_MEMORY_BUFFERS];
 	} capture, playback;
-
-	unsigned int fps[10];
-	unsigned int frame_counter;
 };
 
 static DEFINE_MUTEX(devices_mutex);
@@ -424,16 +418,6 @@ static void capture_urb_complete(struct urb *urb)
 	if (do_period_elapsed)
 		snd_pcm_period_elapsed(stream->substream);
 
-	/* for debugging: measure the sample rate relative to the USB clock */
-	ua->fps[ua->frame_counter++ / ua->packets_per_second] += frames;
-	if (ua->frame_counter >= ARRAY_SIZE(ua->fps) * ua->packets_per_second) {
-		printk(KERN_DEBUG "capture rate:");
-		for (frames = 0; frames < ARRAY_SIZE(ua->fps); ++frames)
-			printk(KERN_CONT " %u", ua->fps[frames]);
-		printk(KERN_CONT "\n");
-		memset(ua->fps, 0, sizeof(ua->fps));
-		ua->frame_counter = 0;
-	}
 	return;
 
 stream_stopped:
@@ -1200,13 +1184,30 @@ static int ua101_probe(struct usb_interface *interface,
 		.type = QUIRK_MIDI_FIXED_ENDPOINT,
 		.data = &midi_ep
 	};
+	static const int intf_numbers[2][3] = {
+		{	/* UA-101 */
+			[INTF_PLAYBACK] = 0,
+			[INTF_CAPTURE] = 1,
+			[INTF_MIDI] = 2,
+		},
+		{	/* UA-1000 */
+			[INTF_CAPTURE] = 1,
+			[INTF_PLAYBACK] = 2,
+			[INTF_MIDI] = 3,
+		},
+	};
 	struct snd_card *card;
 	struct ua101 *ua;
 	unsigned int card_index, i;
+	int is_ua1000;
+	const char *name;
 	char usb_path[32];
 	int err;
 
-	if (interface->altsetting->desc.bInterfaceNumber != 0)
+	is_ua1000 = usb_id->idProduct == 0x0044;
+
+	if (interface->altsetting->desc.bInterfaceNumber !=
+	    intf_numbers[is_ua1000][0])
 		return -ENODEV;
 
 	mutex_lock(&devices_mutex);
@@ -1239,20 +1240,13 @@ static int ua101_probe(struct usb_interface *interface,
 	init_waitqueue_head(&ua->rate_feedback_wait);
 	init_waitqueue_head(&ua->alsa_playback_wait);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
-		ua->intf[2] = interface;
-		ua->intf[0] = usb_ifnum_to_if(ua->dev, 1);
-		ua->intf[1] = usb_ifnum_to_if(ua->dev, 2);
-		usb_driver_claim_interface(&ua101_driver, ua->intf[0], ua);
-		usb_driver_claim_interface(&ua101_driver, ua->intf[1], ua);
-	} else {
-#endif
 	ua->intf[0] = interface;
 	for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
-		ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+		ua->intf[i] = usb_ifnum_to_if(ua->dev,
+					      intf_numbers[is_ua1000][i]);
 		if (!ua->intf[i]) {
-			dev_err(&ua->dev->dev, "interface %u not found\n", i);
+			dev_err(&ua->dev->dev, "interface %u not found\n",
+				intf_numbers[is_ua1000][i]);
 			err = -ENXIO;
 			goto probe_error;
 		}
@@ -1264,39 +1258,19 @@ static int ua101_probe(struct usb_interface *interface,
 			goto probe_error;
 		}
 	}
-#ifdef UA1A_HACK
-	}
-#endif
 
 	snd_card_set_dev(card, &interface->dev);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
-		ua->format_bit = SNDRV_PCM_FMTBIT_S16_LE;
-		ua->rate = 44100;
-		ua->packets_per_second = 1000;
-		ua->capture.channels = 2;
-		ua->playback.channels = 2;
-		ua->capture.frame_bytes = 4;
-		ua->playback.frame_bytes = 4;
-		ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, 2);
-		ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, 1);
-		ua->capture.max_packet_bytes = 192;
-		ua->playback.max_packet_bytes = 192;
-	} else {
-#endif
 	err = detect_usb_format(ua);
 	if (err < 0)
 		goto probe_error;
-#ifdef UA1A_HACK
-	}
-#endif
 
+	name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
 	strcpy(card->driver, "UA-101");
-	strcpy(card->shortname, "UA-101");
+	strcpy(card->shortname, name);
 	usb_make_path(ua->dev, usb_path, sizeof(usb_path));
 	snprintf(ua->card->longname, sizeof(ua->card->longname),
-		 "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+		 "EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
 		 ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
 		 ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
 
@@ -1314,24 +1288,18 @@ static int ua101_probe(struct usb_interface *interface,
 	if (err < 0)
 		goto probe_error;
 
-	err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+	err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
 	if (err < 0)
 		goto probe_error;
 	ua->pcm->private_data = ua;
-	strcpy(ua->pcm->name, "UA-101");
+	strcpy(ua->pcm->name, name);
 	snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
 	snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct != cpu_to_le16(0x0018)) {
-#endif
 	err = snd_usbmidi_create(card, ua->intf[INTF_MIDI],
 				 &ua->midi_list, &midi_quirk);
 	if (err < 0)
 		goto probe_error;
-#ifdef UA1A_HACK
-	}
-#endif
 
 	err = snd_card_register(card);
 	if (err < 0)
@@ -1386,11 +1354,9 @@ static void ua101_disconnect(struct usb_interface *interface)
 }
 
 static struct usb_device_id ua101_ids[] = {
-#ifdef UA1A_HACK
-	{ USB_DEVICE(0x0582, 0x0018) },
-#endif
-	{ USB_DEVICE(0x0582, 0x007d) },
-	{ USB_DEVICE(0x0582, 0x008d) },
+	{ USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
+	{ USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
+	{ USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ua101_ids);

sound/usb/usbaudio.c

@@ -2483,7 +2483,6 @@ static int parse_audio_format_i_type(struct snd_usb_audio *chip,
 				   sample_width, sample_bytes);
 		}
 		/* check the format byte size */
-		printk(" XXXXX SAMPLE BYTES %d\n", sample_bytes);
 		switch (sample_bytes) {
 		case 1:
 			pcm_format = SNDRV_PCM_FORMAT_S8;
@@ -2581,6 +2580,9 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 			     chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
 			    fp->altsetting == 5 && fp->maxpacksize == 392)
 				rate = 96000;
+			/* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
+			if (rate == 16000 && chip->usb_id == USB_ID(0x041e, 0x4068))
+				rate = 8000;
 			fp->rate_table[fp->nr_rates] = rate;
 			if (!fp->rate_min || rate < fp->rate_min)
 				fp->rate_min = rate;
@@ -3386,58 +3388,6 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
 	return 0;
 }
 
-/*
- * Create a stream for an Edirol UA-1000 interface.
- */
-static int create_ua1000_quirk(struct snd_usb_audio *chip,
-			       struct usb_interface *iface,
-			       const struct snd_usb_audio_quirk *quirk)
-{
-	static const struct audioformat ua1000_format = {
-		.format = SNDRV_PCM_FORMAT_S32_LE,
-		.fmt_type = UAC_FORMAT_TYPE_I,
-		.altsetting = 1,
-		.altset_idx = 1,
-		.attributes = 0,
-		.rates = SNDRV_PCM_RATE_CONTINUOUS,
-	};
-	struct usb_host_interface *alts;
-	struct usb_interface_descriptor *altsd;
-	struct audioformat *fp;
-	int stream, err;
-
-	if (iface->num_altsetting != 2)
-		return -ENXIO;
-	alts = &iface->altsetting[1];
-	altsd = get_iface_desc(alts);
-	if (alts->extralen != 11 || alts->extra[1] != USB_DT_CS_INTERFACE ||
-	    altsd->bNumEndpoints != 1)
-		return -ENXIO;
-
-	fp = kmemdup(&ua1000_format, sizeof(*fp), GFP_KERNEL);
-	if (!fp)
-		return -ENOMEM;
-
-	fp->channels = alts->extra[4];
-	fp->iface = altsd->bInterfaceNumber;
-	fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
-	fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
-	fp->datainterval = parse_datainterval(chip, alts);
-	fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
-	fp->rate_max = fp->rate_min = combine_triple(&alts->extra[8]);
-
-	stream = (fp->endpoint & USB_DIR_IN)
-		? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
-	err = add_audio_endpoint(chip, stream, fp);
-	if (err < 0) {
-		kfree(fp);
-		return err;
-	}
-	/* FIXME: playback must be synchronized to capture */
-	usb_set_interface(chip->dev, fp->iface, 0);
-	return 0;
-}
-
 static int snd_usb_create_quirk(struct snd_usb_audio *chip,
 				struct usb_interface *iface,
 				const struct snd_usb_audio_quirk *quirk);
@@ -3686,7 +3636,6 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip,
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
-		[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
 		[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
 		[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
 	};

sound/usb/usbaudio.h

@@ -75,7 +75,6 @@ enum quirk_type {
 	QUIRK_MIDI_US122L,
 	QUIRK_AUDIO_STANDARD_INTERFACE,
 	QUIRK_AUDIO_FIXED_ENDPOINT,
-	QUIRK_AUDIO_EDIROL_UA1000,
 	QUIRK_AUDIO_EDIROL_UAXX,
 	QUIRK_AUDIO_ALIGN_TRANSFER,
 
@@ -112,7 +111,7 @@ struct snd_usb_midi_endpoint_info {
 
 /* for QUIRK_AUDIO/MIDI_STANDARD_INTERFACE, data is NULL */
 
-/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
+/* for QUIRK_AUDIO_EDIROL_UAXX, data is NULL */
 
 /* for QUIRK_IGNORE_INTERFACE, data is NULL */
 

sound/usb/usbquirks.h

@@ -1015,36 +1015,6 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
-{
-	USB_DEVICE(0x0582, 0x0044),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.vendor_name = "Roland",
-		.product_name = "UA-1000",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UA1000
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UA1000
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
-					.out_cables = 0x0003,
-					.in_cables  = 0x0003
-				}
-			},
-			{
-				.ifnum = -1
-			}
-		}
-	}
-},
 {
 	/* has ID 0x0049 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0047),