Commit a327fb0c authored by Shunqian Zheng's avatar Shunqian Zheng Committed by Mauro Carvalho Chehab

media: dt-bindings: media: Add bindings for OV5695

Add device tree binding documentation for the OV5695 sensor.
Signed-off-by: default avatarShunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 40de44bb
* Omnivision OV5695 MIPI CSI-2 sensor
Required Properties:
- compatible: shall be "ovti,ov5695"
- clocks: reference to the xvclk input clock
- clock-names: shall be "xvclk"
- avdd-supply: Analog voltage supply, 2.8 volts
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
- dvdd-supply: Digital core voltage supply, 1.2 volts
- reset-gpios: Low active reset gpio
The device node shall contain one 'port' child node with an
'endpoint' subnode for its digital output video port,
in accordance with the video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
The endpoint optional property 'data-lanes' shall be "<1 2>".
Example:
&i2c7 {
ov5695: camera-sensor@36 {
compatible = "ovti,ov5695";
reg = <0x36>;
pinctrl-names = "default";
pinctrl-0 = <&clk_24m_cam>;
clocks = <&cru SCLK_TESTCLKOUT1>;
clock-names = "xvclk";
avdd-supply = <&pp2800_cam>;
dovdd-supply = <&pp1800>;
dvdd-supply = <&pp1250_cam>;
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
port {
wcam_out: endpoint {
remote-endpoint = <&mipi_in_wcam>;
data-lanes = <1 2>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment