dt-bindings: nvmem: Add properties needed for blowing fuses

On some systems it's possible to actually blow the fuses in the qfprom
from the kernel.  Add properties to support that.

NOTE: Whether this is possible depends on the BIOS settings and
whether the kernel has permissions here, so not all boards will be
able to blow fuses in the kernel.
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-11-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml

@@ -17,8 +17,27 @@ properties:
     const: qcom,qfprom
 
   reg:
-    items:
+    # If the QFPROM is read-only OS image then only the corrected region
+    # needs to be provided.  If the QFPROM is writable then all 4 regions
+    # must be provided.
+    oneOf:
+      - items:
           - description: The corrected region.
+      - items:
+          - description: The corrected region.
+          - description: The raw region.
+          - description: The config region.
+          - description: The security control region.
+
+  # Clock must be provided if QFPROM is writable from the OS image.
+  clocks:
+    maxItems: 1
+  clock-names:
+    const: core
+
+  # Supply reference must be provided if QFPROM is writable from the OS image.
+  vcc-supply:
+    description: Our power supply.
 
   # Needed if any child nodes are present.
   "#address-cells":
@@ -31,6 +50,33 @@ required:
    - reg
 
 examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@784000 {
+        compatible = "qcom,qfprom";
+        reg = <0 0x00784000 0 0x8ff>,
+              <0 0x00780000 0 0x7a0>,
+              <0 0x00782000 0 0x100>,
+              <0 0x00786000 0 0x1fff>;
+        clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        vcc-supply = <&vreg_l11a_1p8>;
+
+        hstx-trim-primary@25b {
+          reg = <0x25b 0x1>;
+          bits = <1 3>;
+        };
+      };
+    };
+
   - |
     soc {
       #address-cells = <2>;