Commit a39ee671 authored by Pekka Enberg's avatar Pekka Enberg Committed by Greg Kroah-Hartman

Staging: w35und: more simplify hal_init_hardware() error handling

Impact: fix, cleanup

If initialization in hal_init_hardware() fails, we call hal_halt() to
clean up and release resource. However, hal_halt() will attempt to
call del_timer_sync() on ->LEDTimer on "stage 3" although it's not
initialized at that point. Fix that up by simplifying error handling
logic in hal_init_hardware() with gotos.
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 00e2e05d
...@@ -488,15 +488,15 @@ static int hal_init_hardware(struct ieee80211_hw *hw) ...@@ -488,15 +488,15 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
pHwData->InitialResource = 1; pHwData->InitialResource = 1;
if (!Wb35Reg_initial(pHwData)) if (!Wb35Reg_initial(pHwData))
goto error; goto error_reg_destroy;
pHwData->InitialResource = 2; pHwData->InitialResource = 2;
if (!Wb35Tx_initial(pHwData)) if (!Wb35Tx_initial(pHwData))
goto error; goto error_tx_destroy;
pHwData->InitialResource = 3; pHwData->InitialResource = 3;
if (!Wb35Rx_initial(pHwData)) if (!Wb35Rx_initial(pHwData))
goto error; goto error_rx_destroy;
pHwData->InitialResource = 4; pHwData->InitialResource = 4;
init_timer(&pHwData->LEDTimer); init_timer(&pHwData->LEDTimer);
...@@ -522,7 +522,13 @@ static int hal_init_hardware(struct ieee80211_hw *hw) ...@@ -522,7 +522,13 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
return 0; return 0;
error: error_rx_destroy:
Wb35Rx_destroy(pHwData);
error_tx_destroy:
Wb35Tx_destroy(pHwData);
error_reg_destroy:
Wb35Reg_destroy(pHwData);
pHwData->SurpriseRemove = 1; pHwData->SurpriseRemove = 1;
return -EINVAL; return -EINVAL;
} }
...@@ -617,11 +623,8 @@ static int wb35_hw_init(struct ieee80211_hw *hw) ...@@ -617,11 +623,8 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
//set a tx power for reference..... //set a tx power for reference.....
// sme_set_tx_power_level(priv, 12); FIXME? // sme_set_tx_power_level(priv, 12); FIXME?
return 0;
error: error:
hal_halt(pHwData, NULL);
return err; return err;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment