MIPS: PowerTV: Base files for Cisco PowerTV platform

Add the Cisco Powertv cable settop box to the MIPS tree. This platform is
based on a MIPS 24Kc processor with various devices integrated on the same
ASIC. There are multiple models of this box, with differing configuration
but the same kernel runs across the product line.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/132/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -338,6 +338,24 @@ config PMC_YOSEMITE
 	  Yosemite is an evaluation board for the RM9000x2 processor
 	  manufactured by PMC-Sierra.
 
+config POWERTV
+	bool "Cisco PowerTV"
+	select BOOT_ELF32
+	select CEVT_R4K
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select CSRC_POWERTV
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select USB_OHCI_LITTLE_ENDIAN
+	help
+	  This enables support for the Cisco PowerTV Platform.
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
@@ -683,6 +701,7 @@ source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/powertv/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -782,6 +801,9 @@ config CSRC_BCM1480
 config CSRC_IOASIC
 	bool
 
+config CSRC_POWERTV
+	bool
+
 config CSRC_R4K_LIB
 	bool
 

arch/mips/Makefile

@@ -444,6 +444,13 @@ cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 core-$(CONFIG_NEC_MARKEINS)	+= arch/mips/emma/markeins/
 load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
 
+#
+# Cisco PowerTV Platform
+#
+core-$(CONFIG_POWERTV)		+= arch/mips/powertv/
+cflags-$(CONFIG_POWERTV)        += -I$(srctree)/arch/mips/include/asm/mach-powertv
+load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
+
 #
 # SGI IP22 (Indy/Indigo2)
 #

arch/mips/include/asm/mach-powertv/asic.h

+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_ASIC_H
+#define _ASM_MACH_POWERTV_ASIC_H
+
+#include <linux/ioport.h>
+#include <asm/mach-powertv/asic_regs.h>
+
+#define DVR_CAPABLE     (1<<0)
+#define PCIE_CAPABLE    (1<<1)
+#define FFS_CAPABLE     (1<<2)
+#define DISPLAY_CAPABLE (1<<3)
+
+/* Platform Family types
+ * For compitability, the new value must be added in the end */
+enum family_type {
+	FAMILY_8500,
+	FAMILY_8500RNG,
+	FAMILY_4500,
+	FAMILY_1500,
+	FAMILY_8600,
+	FAMILY_4600,
+	FAMILY_4600VZA,
+	FAMILY_8600VZB,
+	FAMILY_1500VZE,
+	FAMILY_1500VZF,
+	FAMILIES
+};
+
+/* Register maps for each ASIC */
+extern const struct register_map calliope_register_map;
+extern const struct register_map cronus_register_map;
+extern const struct register_map zeus_register_map;
+
+extern struct resource dvr_cronus_resources[];
+extern struct resource dvr_zeus_resources[];
+extern struct resource non_dvr_calliope_resources[];
+extern struct resource non_dvr_cronus_resources[];
+extern struct resource non_dvr_cronuslite_resources[];
+extern struct resource non_dvr_vz_calliope_resources[];
+extern struct resource non_dvr_vze_calliope_resources[];
+extern struct resource non_dvr_vzf_calliope_resources[];
+extern struct resource non_dvr_zeus_resources[];
+
+extern void powertv_platform_init(void);
+extern void platform_alloc_bootmem(void);
+extern enum asic_type platform_get_asic(void);
+extern enum family_type platform_get_family(void);
+extern int platform_supports_dvr(void);
+extern int platform_supports_ffs(void);
+extern int platform_supports_pcie(void);
+extern int platform_supports_display(void);
+extern void configure_platform(void);
+extern void platform_configure_usb_ehci(void);
+extern void platform_unconfigure_usb_ehci(void);
+extern void platform_configure_usb_ohci(void);
+extern void platform_unconfigure_usb_ohci(void);
+
+/* Platform Resources */
+#define ASIC_RESOURCE_GET_EXISTS 1
+extern struct resource *asic_resource_get(const char *name);
+extern void platform_release_memory(void *baddr, int size);
+
+/* Reboot Cause */
+extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
+extern void set_locked_reboot_cause(char code, unsigned int data,
+	unsigned int data2);
+
+enum sys_reboot_type {
+	sys_unknown_reboot = 0x00,	/* Unknown reboot cause */
+	sys_davic_change = 0x01,	/* Reboot due to change in DAVIC
+					 * mode */
+	sys_user_reboot = 0x02,		/* Reboot initiated by user */
+	sys_system_reboot = 0x03,	/* Reboot initiated by OS */
+	sys_trap_reboot = 0x04,		/* Reboot due to a CPU trap */
+	sys_silent_reboot = 0x05,	/* Silent reboot */
+	sys_boot_ldr_reboot = 0x06,	/* Bootloader reboot */
+	sys_power_up_reboot = 0x07,	/* Power on bootup.  Older
+					 * drivers may report as
+					 * userReboot. */
+	sys_code_change = 0x08,		/* Reboot to take code change.
+					 * Older drivers may report as
+					 * userReboot. */
+	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
+					 * reset button reset.  Older
+					 * drivers may report as
+					 * userReboot. */
+	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
+};
+
+#endif /* _ASM_MACH_POWERTV_ASIC_H */

arch/mips/include/asm/mach-powertv/asic_regs.h

+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __ASM_MACH_POWERTV_ASIC_H_
+#define __ASM_MACH_POWERTV_ASIC_H_
+#include <linux/io.h>
+
+/* ASIC types */
+enum asic_type {
+	ASIC_UNKNOWN,
+	ASIC_ZEUS,
+	ASIC_CALLIOPE,
+	ASIC_CRONUS,
+	ASIC_CRONUSLITE,
+	ASICS
+};
+
+/* hardcoded values read from Chip Version registers */
+#define CRONUS_10	0x0B4C1C20
+#define CRONUS_11	0x0B4C1C21
+#define CRONUSLITE_10	0x0B4C1C40
+
+#define NAND_FLASH_BASE	0x03000000
+#define ZEUS_IO_BASE	0x09000000
+#define CALLIOPE_IO_BASE	0x08000000
+#define CRONUS_IO_BASE	0x09000000
+#define ASIC_IO_SIZE	0x01000000
+
+/* Definitions for backward compatibility */
+#define UART1_INTSTAT	uart1_intstat
+#define UART1_INTEN	uart1_inten
+#define UART1_CONFIG1	uart1_config1
+#define UART1_CONFIG2	uart1_config2
+#define UART1_DIVISORHI	uart1_divisorhi
+#define UART1_DIVISORLO	uart1_divisorlo
+#define UART1_DATA	uart1_data
+#define UART1_STATUS	uart1_status
+
+/* ASIC register enumeration */
+struct register_map {
+	u32 eic_slow0_strt_add;
+	u32 eic_cfg_bits;
+	u32 eic_ready_status;
+
+	u32 chipver3;
+	u32 chipver2;
+	u32 chipver1;
+	u32 chipver0;
+
+	u32 uart1_intstat;
+	u32 uart1_inten;
+	u32 uart1_config1;
+	u32 uart1_config2;
+	u32 uart1_divisorhi;
+	u32 uart1_divisorlo;
+	u32 uart1_data;
+	u32 uart1_status;
+
+	u32 int_stat_3;
+	u32 int_stat_2;
+	u32 int_stat_1;
+	u32 int_stat_0;
+	u32 int_config;
+	u32 int_int_scan;
+	u32 ien_int_3;
+	u32 ien_int_2;
+	u32 ien_int_1;
+	u32 ien_int_0;
+	u32 int_level_3_3;
+	u32 int_level_3_2;
+	u32 int_level_3_1;
+	u32 int_level_3_0;
+	u32 int_level_2_3;
+	u32 int_level_2_2;
+	u32 int_level_2_1;
+	u32 int_level_2_0;
+	u32 int_level_1_3;
+	u32 int_level_1_2;
+	u32 int_level_1_1;
+	u32 int_level_1_0;
+	u32 int_level_0_3;
+	u32 int_level_0_2;
+	u32 int_level_0_1;
+	u32 int_level_0_0;
+	u32 int_docsis_en;
+
+	u32 mips_pll_setup;
+	u32 usb_fs;
+	u32 test_bus;
+	u32 crt_spare;
+	u32 usb2_ohci_int_mask;
+	u32 usb2_strap;
+	u32 ehci_hcapbase;
+	u32 ohci_hc_revision;
+	u32 bcm1_bs_lmi_steer;
+	u32 usb2_control;
+	u32 usb2_stbus_obc;
+	u32 usb2_stbus_mess_size;
+	u32 usb2_stbus_chunk_size;
+
+	u32 pcie_regs;
+	u32 tim_ch;
+	u32 tim_cl;
+	u32 gpio_dout;
+	u32 gpio_din;
+	u32 gpio_dir;
+	u32 watchdog;
+	u32 front_panel;
+
+	u32 register_maps;
+};
+
+extern enum asic_type asic;
+extern const struct register_map *register_map;
+extern unsigned long asic_phy_base;	/* Physical address of ASIC */
+extern unsigned long asic_base;		/* Virtual address of ASIC */
+
+/*
+ * Macros to interface to registers through their ioremapped address
+ * asic_reg_offset	Returns the offset of a given register from the start
+ *			of the ASIC address space
+ * asic_reg_phys_addr	Returns the physical address of the given register
+ * asic_reg_addr	Returns the iomapped virtual address of the given
+ *			register.
+ */
+#define asic_reg_offset(x)	(register_map->x)
+#define asic_reg_phys_addr(x)	(asic_phy_base + asic_reg_offset(x))
+#define asic_reg_addr(x) \
+	((unsigned int *) (asic_base + asic_reg_offset(x)))
+
+/*
+ * The asic_reg macro is gone. It should be replaced by either asic_read or
+ * asic_write, as appropriate.
+ */
+
+#define asic_read(x)		readl(asic_reg_addr(x))
+#define asic_write(v, x)	writel(v, asic_reg_addr(x))
+
+extern void asic_irq_init(void);
+#endif

arch/mips/include/asm/mach-powertv/dma-coherence.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Version from mach-generic modified to support PowerTV port
+ * Portions Copyright (C) 2009  Cisco Systems, Inc.
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+
+#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
+#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
+
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <asm/mach-powertv/asic.h>
+
+static inline bool is_kseg2(void *addr)
+{
+	return (unsigned long)addr >= KSEG2;
+}
+
+static inline unsigned long virt_to_phys_from_pte(void *addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+
+	unsigned long virt_addr = (unsigned long)addr;
+	unsigned long phys_addr = 0UL;
+
+	/* get the page global directory. */
+	pgd = pgd_offset_k(virt_addr);
+
+	if (!pgd_none(*pgd)) {
+		/* get the page upper directory */
+		pud = pud_offset(pgd, virt_addr);
+		if (!pud_none(*pud)) {
+			/* get the page middle directory */
+			pmd = pmd_offset(pud, virt_addr);
+			if (!pmd_none(*pmd)) {
+				/* get a pointer to the page table entry */
+				ptep = pte_offset(pmd, virt_addr);
+				pte = *ptep;
+				/* check for a valid page */
+				if (pte_present(pte)) {
+					/* get the physical address the page is
+					 * refering to */
+					phys_addr = (unsigned long)
+						page_to_phys(pte_page(pte));
+					/* add the offset within the page */
+					phys_addr |= (virt_addr & ~PAGE_MASK);
+				}
+			}
+		}
+	}
+
+	return phys_addr;
+}
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	if (is_kseg2(addr))
+		return phys_to_bus(virt_to_phys_from_pte(addr));
+	else
+		return phys_to_bus(virt_to_phys(addr));
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+	struct page *page)
+{
+	return phys_to_bus(page_to_phys(page));
+}
+
+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
+	dma_addr_t dma_addr)
+{
+	return bus_to_phys(dma_addr);
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
+	size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */

arch/mips/include/asm/mach-powertv/ioremap.h

+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ * Portions Copyright (C)  Cisco Systems, Inc.
+ */
+#ifndef __ASM_MACH_POWERTV_IOREMAP_H
+#define __ASM_MACH_POWERTV_IOREMAP_H
+
+#include <linux/types.h>
+
+#define LOW_MEM_BOUNDARY_PHYS	0x20000000
+#define LOW_MEM_BOUNDARY_MASK	(~(LOW_MEM_BOUNDARY_PHYS - 1))
+
+/*
+ * The bus addresses are different than the physical addresses that
+ * the processor sees by an offset. This offset varies by ASIC
+ * version. Define a variable to hold the offset and some macros to
+ * make the conversion simpler. */
+extern unsigned long phys_to_bus_offset;
+
+#ifdef CONFIG_HIGHMEM
+#define MEM_GAP_PHYS		0x60000000
+/*
+ * TODO: We will use the hard code for conversion between physical and
+ * bus until the bootloader releases their device tree to us.
+ */
+#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \
+	((x) + phys_to_bus_offset) : (x))
+#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \
+	((x) - phys_to_bus_offset) : (x))
+#else
+#define phys_to_bus(x) ((x) + phys_to_bus_offset)
+#define bus_to_phys(x) ((x) - phys_to_bus_offset)
+#endif
+
+/*
+ * Determine whether the address we are given is for an ASIC device
+ * Params:  addr    Address to check
+ * Returns: Zero if the address is not for ASIC devices, non-zero
+ *      if it is.
+ */
+static inline int asic_is_device_addr(phys_t addr)
+{
+	return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK);
+}
+
+/*
+ * Determine whether the address we are given is external RAM mappable
+ * into KSEG1.
+ * Params:  addr    Address to check
+ * Returns: Zero if the address is not for external RAM and
+ */
+static inline int asic_is_lowmem_ram_addr(phys_t addr)
+{
+	/*
+	 * The RAM always starts at the following address in the processor's
+	 * physical address space
+	 */
+	static const phys_t phys_ram_base = 0x10000000;
+	phys_t bus_ram_base;
+
+	bus_ram_base = phys_to_bus_offset + phys_ram_base;
+
+	return addr >= bus_ram_base &&
+		addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base));
+}
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+	unsigned long flags)
+{
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return 0;
+}
+#endif /* __ASM_MACH_POWERTV_IOREMAP_H */

arch/mips/include/asm/mach-powertv/irq.h

+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_IRQ_H
+#define _ASM_MACH_POWERTV_IRQ_H
+#include <asm/mach-powertv/interrupts.h>
+
+#define MIPS_CPU_IRQ_BASE	ibase
+#define NR_IRQS			127
+#endif

arch/mips/include/asm/mach-powertv/powertv-clock.h

+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+/*
+ * Local definitions for the powertv PCI code
+ */
+
+#ifndef _POWERTV_PCI_POWERTV_PCI_H_
+#define _POWERTV_PCI_POWERTV_PCI_H_
+extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+extern int asic_pcie_init(void);
+extern int asic_pcie_init(void);
+
+extern int log_level;
+#endif

arch/mips/include/asm/mach-powertv/war.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This version for the PowerTV platform copied from the Malta version.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ */
+#ifndef __ASM_MACH_POWERTV_WAR_H
+#define __ASM_MACH_POWERTV_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		1
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MACH_POWERTV_WAR_H */

arch/mips/kernel/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
 obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
 obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
+obj-$(CONFIG_CSRC_POWERTV)	+= csrc-powertv.o
 obj-$(CONFIG_CSRC_R4K_LIB)	+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o

arch/mips/kernel/csrc-powertv.c

+/*
+ * Copyright (C) 2008 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+/*
+ * The file comes from kernel/csrc-r4k.c
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/time.h>			/* Not included in linux/time.h */
+
+#include <asm/mach-powertv/asic_regs.h>
+#include "powertv-clock.h"
+
+/* MIPS PLL Register Definitions */
+#define PLL_GET_M(x)		(((x) >> 8) & 0x000000FF)
+#define PLL_GET_N(x)		(((x) >> 16) & 0x000000FF)
+#define PLL_GET_P(x)		(((x) >> 24) & 0x00000007)
+
+/*
+ * returns:  Clock frequency in kHz
+ */
+unsigned int __init mips_get_pll_freq(void)
+{
+	unsigned int pll_reg, m, n, p;
+	unsigned int fin = 54000; /* Base frequency in kHz */
+	unsigned int fout;
+
+	/* Read PLL register setting */
+	pll_reg = asic_read(mips_pll_setup);
+	m = PLL_GET_M(pll_reg);
+	n = PLL_GET_N(pll_reg);
+	p = PLL_GET_P(pll_reg);
+	pr_info("MIPS PLL Register:0x%x  M=%d  N=%d  P=%d\n", pll_reg, m, n, p);
+
+	/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
+	fout = ((2 * n * fin) / (m * (0x01 << p)));
+
+	pr_info("MIPS Clock Freq=%d kHz\n", fout);
+
+	return fout;
+}
+
+static cycle_t c0_hpt_read(struct clocksource *cs)
+{
+	return read_c0_count();
+}
+
+static struct clocksource clocksource_mips = {
+	.name		= "powertv-counter",
+	.read		= c0_hpt_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init powertv_c0_hpt_clocksource_init(void)
+{
+	unsigned int pll_freq = mips_get_pll_freq();
+
+	pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
+		(pll_freq % 1000) * 100 / 1000);
+
+	mips_hpt_frequency = pll_freq / 2 * 1000;
+
+	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+
+	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+
+	clocksource_register(&clocksource_mips);
+}
+
+/**
+ * struct tim_c - free running counter
+ * @hi:	High 16 bits of the counter
+ * @lo:	Low 32 bits of the counter
+ *
+ * Lays out the structure of the free running counter in memory. This counter
+ * increments at a rate of 27 MHz/8 on all platforms.
+ */
+struct tim_c {
+	unsigned int hi;
+	unsigned int lo;
+};
+
+static struct tim_c *tim_c;
+
+static cycle_t tim_c_read(struct clocksource *cs)
+{
+	unsigned int hi;
+	unsigned int next_hi;
+	unsigned int lo;
+
+	hi = readl(&tim_c->hi);
+
+	for (;;) {
+		lo = readl(&tim_c->lo);
+		next_hi = readl(&tim_c->hi);
+		if (next_hi == hi)
+			break;
+		hi = next_hi;
+	}
+
+pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
+	return ((u64) hi << 32) | lo;
+}
+
+#define TIM_C_SIZE		48		/* # bits in the timer */
+
+static struct clocksource clocksource_tim_c = {
+	.name		= "powertv-tim_c",
+	.read		= tim_c_read,
+	.mask		= CLOCKSOURCE_MASK(TIM_C_SIZE),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/**
+ * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
+ *
+ * The hard part here is coming up with a constant k and shift s such that
+ * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
+ * when shifted right by s, yields the corresponding number of nanoseconds.
+ * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
+ * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
+ * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
+ * done in 64 bits, avoiding an overflow means that k must be less than
+ * 64 - 48 = 16 bits.
+ */
+static void __init powertv_tim_c_clocksource_init(void)
+{
+	int			prescale;
+	unsigned long		dividend;
+	unsigned long		k;
+	int			s;
+	const int		max_k_bits = (64 - 48) - 1;
+	const unsigned long	billion = 1000000000;
+	const unsigned long	counts_per_second = 27000000 / 8;
+
+	prescale = BITS_PER_LONG - ilog2(billion) - 1;
+	dividend = billion << prescale;
+	k = dividend / counts_per_second;
+	s = ilog2(k) - max_k_bits;
+
+	if (s < 0)
+		s = prescale;
+
+	else {
+		k >>= s;
+		s += prescale;
+	}
+
+	clocksource_tim_c.mult = k;
+	clocksource_tim_c.shift = s;
+	clocksource_tim_c.rating = 200;
+
+	clocksource_register(&clocksource_tim_c);
+	tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
+}
+
+/**
+ powertv_clocksource_init - initialize all clocksources
+ */
+void __init powertv_clocksource_init(void)
+{
+	powertv_c0_hpt_clocksource_init();
+	powertv_tim_c_clocksource_init();
+}

arch/mips/powertv/Kconfig

+source "arch/mips/powertv/asic/Kconfig"
+
+config BOOTLOADER_DRIVER
+	bool "PowerTV Bootloader Driver Support"
+	default n
+	depends on POWERTV
+	help
+	  Use this option if you want to load bootloader driver.
+
+config BOOTLOADER_FAMILY
+	string "POWERTV Bootloader Family string"
+	default "85"
+	depends on POWERTV && !BOOTLOADER_DRIVER
+	help
+	  This value should be specified when the bootloader driver is disabled
+	  and must be exactly two characters long. Families supported are:
+	    R1 - RNG-100  R2 - RNG-200
+	    A1 - Class A  B1 - Class B
+	    E1 - Class E  F1 - Class F
+	    44 - 45xx     46 - 46xx
+	    85 - 85xx     86 - 86xx

arch/mips/powertv/Makefile

+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+# Portions copyright (C)  2009 Cisco Systems, Inc.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Makefile for the Cisco PowerTV-specific kernel interface routines
+# under Linux.
+#
+
+obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+
+EXTRA_CFLAGS += -Wall -Werror

arch/mips/powertv/asic/Kconfig

+config MIN_RUNTIME_RESOURCES
+	bool "Support for minimum runtime resources"
+	default n
+	depends on POWERTV
+	help
+	  Enables support for minimizing the number of (SA asic) runtime
+	  resources that are preallocated by the kernel.
+
+config MIN_RUNTIME_DOCSIS
+	bool "Support for minimum DOCSIS resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated DOCSIS resource.
+
+config MIN_RUNTIME_PMEM
+	bool "Support for minimum PMEM resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated Memory resource.
+
+config MIN_RUNTIME_TFTP
+	bool "Support for minimum TFTP resource"
+	default y
+	depends on MIN_RUNTIME_RESOURCES
+	help
+	  Enables support for the preallocated TFTP resource.

arch/mips/powertv/asic/Makefile

+#
+# Copyright (C) 2009  Scientific-Atlanta, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \
+	 irq_asic.o prealloc-calliope.o prealloc-cronus.o \
+	 prealloc-cronuslite.o prealloc-zeus.o
+
+EXTRA_CFLAGS += -Wall -Werror

arch/mips/powertv/asic/asic-calliope.c

+/*
+ * Locations of devices in the Calliope ASIC.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map calliope_register_map = {
+	.eic_slow0_strt_add = 0x800000,
+	.eic_cfg_bits = 0x800038,
+	.eic_ready_status = 0x80004c,
+
+	.chipver3 = 0xA00800,
+	.chipver2 = 0xA00804,
+	.chipver1 = 0xA00808,
+	.chipver0 = 0xA0080c,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0xA01800,
+	.uart1_inten = 0xA01804,
+	.uart1_config1 = 0xA01808,
+	.uart1_config2 = 0xA0180C,
+	.uart1_divisorhi = 0xA01810,
+	.uart1_divisorlo = 0xA01814,
+	.uart1_data = 0xA01818,
+	.uart1_status = 0xA0181C,
+
+	.int_stat_3 = 0xA02800,
+	.int_stat_2 = 0xA02804,
+	.int_stat_1 = 0xA02808,
+	.int_stat_0 = 0xA0280c,
+	.int_config = 0xA02810,
+	.int_int_scan = 0xA02818,
+	.ien_int_3 = 0xA02830,
+	.ien_int_2 = 0xA02834,
+	.ien_int_1 = 0xA02838,
+	.ien_int_0 = 0xA0283c,
+	.int_level_3_3 = 0xA02880,
+	.int_level_3_2 = 0xA02884,
+	.int_level_3_1 = 0xA02888,
+	.int_level_3_0 = 0xA0288c,
+	.int_level_2_3 = 0xA02890,
+	.int_level_2_2 = 0xA02894,
+	.int_level_2_1 = 0xA02898,
+	.int_level_2_0 = 0xA0289c,
+	.int_level_1_3 = 0xA028a0,
+	.int_level_1_2 = 0xA028a4,
+	.int_level_1_1 = 0xA028a8,
+	.int_level_1_0 = 0xA028ac,
+	.int_level_0_3 = 0xA028b0,
+	.int_level_0_2 = 0xA028b4,
+	.int_level_0_1 = 0xA028b8,
+	.int_level_0_0 = 0xA028bc,
+	.int_docsis_en = 0xA028F4,
+
+	.mips_pll_setup = 0x980000,
+	.usb_fs = 0x980030,     	/* -default 72800028- */
+	.test_bus = 0x9800CC,
+	.crt_spare = 0x9800d4,
+	.usb2_ohci_int_mask = 0x9A000c,
+	.usb2_strap = 0x9A0014,
+	.ehci_hcapbase = 0x9BFE00,
+	.ohci_hc_revision = 0x9BFC00,
+	.bcm1_bs_lmi_steer = 0x9E0004,
+	.usb2_control = 0x9E0054,
+	.usb2_stbus_obc = 0x9BFF00,
+	.usb2_stbus_mess_size = 0x9BFF04,
+	.usb2_stbus_chunk_size = 0x9BFF08,
+
+	.pcie_regs = 0x000000,      	/* -doesn't exist- */
+	.tim_ch = 0xA02C10,
+	.tim_cl = 0xA02C14,
+	.gpio_dout = 0xA02c20,
+	.gpio_din = 0xA02c24,
+	.gpio_dir = 0xA02c2C,
+	.watchdog = 0xA02c30,
+	.front_panel = 0x000000,    	/* -not used- */
+};

arch/mips/powertv/asic/asic-cronus.c

+/*
+ * Locations of devices in the Cronus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map cronus_register_map = {
+	.eic_slow0_strt_add = 0x000000,
+	.eic_cfg_bits = 0x000038,
+	.eic_ready_status = 0x00004C,
+
+	.chipver3 = 0x2A0800,
+	.chipver2 = 0x2A0804,
+	.chipver1 = 0x2A0808,
+	.chipver0 = 0x2A080C,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0x2A1800,
+	.uart1_inten = 0x2A1804,
+	.uart1_config1 = 0x2A1808,
+	.uart1_config2 = 0x2A180C,
+	.uart1_divisorhi = 0x2A1810,
+	.uart1_divisorlo = 0x2A1814,
+	.uart1_data = 0x2A1818,
+	.uart1_status = 0x2A181C,
+
+	.int_stat_3 = 0x2A2800,
+	.int_stat_2 = 0x2A2804,
+	.int_stat_1 = 0x2A2808,
+	.int_stat_0 = 0x2A280C,
+	.int_config = 0x2A2810,
+	.int_int_scan = 0x2A2818,
+	.ien_int_3 = 0x2A2830,
+	.ien_int_2 = 0x2A2834,
+	.ien_int_1 = 0x2A2838,
+	.ien_int_0 = 0x2A283C,
+	.int_level_3_3 = 0x2A2880,
+	.int_level_3_2 = 0x2A2884,
+	.int_level_3_1 = 0x2A2888,
+	.int_level_3_0 = 0x2A288C,
+	.int_level_2_3 = 0x2A2890,
+	.int_level_2_2 = 0x2A2894,
+	.int_level_2_1 = 0x2A2898,
+	.int_level_2_0 = 0x2A289C,
+	.int_level_1_3 = 0x2A28A0,
+	.int_level_1_2 = 0x2A28A4,
+	.int_level_1_1 = 0x2A28A8,
+	.int_level_1_0 = 0x2A28AC,
+	.int_level_0_3 = 0x2A28B0,
+	.int_level_0_2 = 0x2A28B4,
+	.int_level_0_1 = 0x2A28B8,
+	.int_level_0_0 = 0x2A28BC,
+	.int_docsis_en = 0x2A28F4,
+
+	.mips_pll_setup = 0x1C0000,
+	.usb_fs = 0x1C0018,
+	.test_bus = 0x1C00CC,
+	.crt_spare = 0x1c00d4,
+	.usb2_ohci_int_mask = 0x20000C,
+	.usb2_strap = 0x200014,
+	.ehci_hcapbase = 0x21FE00,
+	.ohci_hc_revision = 0x1E0000,
+	.bcm1_bs_lmi_steer = 0x2E0008,
+	.usb2_control = 0x2E004C,
+	.usb2_stbus_obc = 0x21FF00,
+	.usb2_stbus_mess_size = 0x21FF04,
+	.usb2_stbus_chunk_size = 0x21FF08,
+
+	.pcie_regs = 0x220000,
+	.tim_ch = 0x2A2C10,
+	.tim_cl = 0x2A2C14,
+	.gpio_dout = 0x2A2C20,
+	.gpio_din = 0x2A2C24,
+	.gpio_dir = 0x2A2C2C,
+	.watchdog = 0x2A2C30,
+	.front_panel = 0x2A3800,
+};

arch/mips/powertv/asic/asic-zeus.c

+/*
+ * Locations of devices in the Zeus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map zeus_register_map = {
+	.eic_slow0_strt_add = 0x000000,
+	.eic_cfg_bits = 0x000038,
+	.eic_ready_status = 0x00004c,
+
+	.chipver3 = 0x280800,
+	.chipver2 = 0x280804,
+	.chipver1 = 0x280808,
+	.chipver0 = 0x28080c,
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = 0x281800,
+	.uart1_inten = 0x281804,
+	.uart1_config1 = 0x281808,
+	.uart1_config2 = 0x28180C,
+	.uart1_divisorhi = 0x281810,
+	.uart1_divisorlo = 0x281814,
+	.uart1_data = 0x281818,
+	.uart1_status = 0x28181C,
+
+	.int_stat_3 = 0x282800,
+	.int_stat_2 = 0x282804,
+	.int_stat_1 = 0x282808,
+	.int_stat_0 = 0x28280c,
+	.int_config = 0x282810,
+	.int_int_scan = 0x282818,
+	.ien_int_3 = 0x282830,
+	.ien_int_2 = 0x282834,
+	.ien_int_1 = 0x282838,
+	.ien_int_0 = 0x28283c,
+	.int_level_3_3 = 0x282880,
+	.int_level_3_2 = 0x282884,
+	.int_level_3_1 = 0x282888,
+	.int_level_3_0 = 0x28288c,
+	.int_level_2_3 = 0x282890,
+	.int_level_2_2 = 0x282894,
+	.int_level_2_1 = 0x282898,
+	.int_level_2_0 = 0x28289c,
+	.int_level_1_3 = 0x2828a0,
+	.int_level_1_2 = 0x2828a4,
+	.int_level_1_1 = 0x2828a8,
+	.int_level_1_0 = 0x2828ac,
+	.int_level_0_3 = 0x2828b0,
+	.int_level_0_2 = 0x2828b4,
+	.int_level_0_1 = 0x2828b8,
+	.int_level_0_0 = 0x2828bc,
+	.int_docsis_en = 0x2828F4,
+
+	.mips_pll_setup = 0x1a0000,
+	.usb_fs = 0x1a0018,
+	.test_bus = 0x1a0238,
+	.crt_spare = 0x1a0090,
+	.usb2_ohci_int_mask = 0x1e000c,
+	.usb2_strap = 0x1e0014,
+	.ehci_hcapbase = 0x1FFE00,
+	.ohci_hc_revision = 0x1FFC00,
+	.bcm1_bs_lmi_steer = 0x2C0008,
+	.usb2_control = 0x2c01a0,
+	.usb2_stbus_obc = 0x1FFF00,
+	.usb2_stbus_mess_size = 0x1FFF04,
+	.usb2_stbus_chunk_size = 0x1FFF08,
+
+	.pcie_regs = 0x200000,
+	.tim_ch = 0x282C10,
+	.tim_cl = 0x282C14,
+	.gpio_dout = 0x282c20,
+	.gpio_din = 0x282c24,
+	.gpio_dir = 0x282c2C,
+	.watchdog = 0x282c30,
+	.front_panel = 0x283800,
+};

arch/mips/powertv/asic/asic_int.c

+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Portions copyright (C) 2009  Cisco Systems, Inc.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the PowerTV
+ * platform.
+ *
+ * The interrupt controller is located in the South Bridge a PIIX4 device
+ * with two internal 82C95 interrupt controllers.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+
+#include <asm/irq_cpu.h>
+#include <linux/io.h>
+#include <asm/irq_regs.h>
+#include <asm/mips-boards/generic.h>
+
+#include <asm/mach-powertv/asic_regs.h>
+
+static DEFINE_SPINLOCK(asic_irq_lock);
+
+static inline int get_int(void)
+{
+	unsigned long flags;
+	int irq;
+
+	spin_lock_irqsave(&asic_irq_lock, flags);
+
+	irq = (asic_read(int_int_scan) >> 4) - 1;
+
+	if (irq == 0 || irq >= NR_IRQS)
+		irq = -1;
+
+	spin_unlock_irqrestore(&asic_irq_lock, flags);
+
+	return irq;
+}
+
+static void asic_irqdispatch(void)
+{
+	int irq;
+
+	irq = get_int();
+	if (irq < 0)
+		return;  /* interrupt has already been cleared */
+
+	do_IRQ(irq);
+}
+
+static inline int clz(unsigned long x)
+{
+	__asm__(
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+	return fls(pending) - 1 + CAUSEB_IP;
+}
+
+/*
+ * TODO: check how it works under EIC mode.
+ */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq == CAUSEF_IP3)
+		asic_irqdispatch();
+	else if (irq >= 0)
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	asic_irq_init();
+
+	/*
+	 * Initialize interrupt exception vectors.
+	 */
+	if (cpu_has_veic || cpu_has_vint) {
+		int nvec = cpu_has_veic ? 64 : 8;
+		for (i = 0; i < nvec; i++)
+			set_vi_handler(i, asic_irqdispatch);
+	}
+}

arch/mips/powertv/asic/irq_asic.c

+/*
+ * Portions copyright (C) 2005-2009 Scientific Atlanta
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * Modified from arch/mips/kernel/irq-rm7000.c:
+ * Copyright (C) 2003 Ralf Baechle
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-powertv/asic_regs.h>
+
+static inline void unmask_asic_irq(unsigned int irq)
+{
+	unsigned long enable_bit;
+
+	enable_bit = (1 << (irq & 0x1f));
+
+	switch (irq >> 5) {
+	case 0:
+		asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
+		break;
+	case 1:
+		asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
+		break;
+	case 2:
+		asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
+		break;
+	case 3:
+		asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void mask_asic_irq(unsigned int irq)
+{
+	unsigned long disable_mask;
+
+	disable_mask = ~(1 << (irq & 0x1f));
+
+	switch (irq >> 5) {
+	case 0:
+		asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
+		break;
+	case 1:
+		asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
+		break;
+	case 2:
+		asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
+		break;
+	case 3:
+		asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static struct irq_chip asic_irq_chip = {
+	.name = "ASIC Level",
+	.ack = mask_asic_irq,
+	.mask = mask_asic_irq,
+	.mask_ack = mask_asic_irq,
+	.unmask = unmask_asic_irq,
+	.eoi = unmask_asic_irq,
+};
+
+void __init asic_irq_init(void)
+{
+	int i;
+
+	/* set priority to 0 */
+	write_c0_status(read_c0_status() & ~(0x0000fc00));
+
+	asic_write(0, ien_int_0);
+	asic_write(0, ien_int_1);
+	asic_write(0, ien_int_2);
+	asic_write(0, ien_int_3);
+
+	asic_write(0x0fffffff, int_level_3_3);
+	asic_write(0xffffffff, int_level_3_2);
+	asic_write(0xffffffff, int_level_3_1);
+	asic_write(0xffffffff, int_level_3_0);
+	asic_write(0xffffffff, int_level_2_3);
+	asic_write(0xffffffff, int_level_2_2);
+	asic_write(0xffffffff, int_level_2_1);
+	asic_write(0xffffffff, int_level_2_0);
+	asic_write(0xffffffff, int_level_1_3);
+	asic_write(0xffffffff, int_level_1_2);
+	asic_write(0xffffffff, int_level_1_1);
+	asic_write(0xffffffff, int_level_1_0);
+	asic_write(0xffffffff, int_level_0_3);
+	asic_write(0xffffffff, int_level_0_2);
+	asic_write(0xffffffff, int_level_0_1);
+	asic_write(0xffffffff, int_level_0_0);
+
+	asic_write(0xf, int_int_scan);
+
+	/*
+	 * Initialize interrupt handlers.
+	 */
+	for (i = 0; i < NR_IRQS; i++)
+		set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
+}

arch/mips/powertv/asic/prealloc-cronuslite.c

+/*
+ * Memory pre-allocations for Cronus Lite boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * NON_DVR_CAPABLE CRONUSLITE RESOURCES
+ */
+struct resource non_dvr_cronuslite_resources[] __initdata =
+{
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x60000000,
+		.end    = 0x601FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x60200000,
+		.end    = 0x60201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x60202000,
+		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x63580000,
+		.end    = 0x63B80000 - 1,  /* 6 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x62000000,
+		.end    = 0x62700000 - 1,	/* 7 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x62700000,
+		.end    = 0x63500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x26000000,
+		.end    = 0x26020000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x63B83000,
+		.end    = 0x63B84000 - 1,  /* 4 KB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x63B84000,
+		.end    = 0x63E48C00 - 1,  /* 945K * 3 for playback */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * PMEM
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Persistent memory for diagnostics.
+	 *
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x63B80000,
+		.end    = 0x63B82800 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * KAVNET
+	 *    NP Reset Vector - must be of the form xxCxxxxx
+	 *	   NP Image - must be video bank 1
+	 *	   NP IPC - must be video bank 2
+	 */
+	{
+		.name   = "NP_Reset_Vector",
+		.start  = 0x27c00000,
+		.end    = 0x27c01000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_Image",
+		.start  = 0x27020000,
+		.end    = 0x27060000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_IPC",
+		.start  = 0x63500000,
+		.end    = 0x63580000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * NAND Flash
+	 */
+	{
+		.name   = "NandFlash",
+		.start  = NAND_FLASH_BASE,
+		.end    = NAND_FLASH_BASE + 0x400 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};

arch/mips/powertv/cmdline.c

+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include "init.h"
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+void  __init prom_init_cmdline(void)
+{
+	int len;
+
+	if (prom_argc != 1)
+		return;
+
+	len = strlen(arcs_cmdline);
+
+	arcs_cmdline[len] = ' ';
+
+	strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
+		COMMAND_LINE_SIZE - len - 1);
+}