Merge tag 'chrome-platform-for-linus-4.13' of...

Merge tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:
 "Changes in this pull request are around catching up cros_ec with the
  internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and
  cros_ec_lightbar.

  Also, switching maintainership from olof to bleung"

* tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome : Add myself as Maintainer
  platform/chrome: cros_ec_lightbar - hide unused PM functions
  cros_ec: Don't signal wake event for non-wake host events
  cros_ec: Fix deadlock when EC is not responsive at probe
  cros_ec: Don't return error when checking command version
  platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend
  platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC
  platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence
  platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs
  platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI
  platform/chrome: cros_ec_lpc: Add power management ops
  platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device
  platform/chrome: cros_ec_lpc: Add support for mec1322 EC
  platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants
  mfd: cros_ec: Add support for dumping panic information
  cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer()
  mfd: cros_ec: add debugfs, console log file
  mfd: cros_ec: Add EC console read structures definitions
  mfd: cros_ec: Add helper for event notifier.

MAINTAINERS

@@ -3319,9 +3319,10 @@ F:	Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
 F:	drivers/input/touchscreen/chipone_icn8318.c
 
 CHROME HARDWARE PLATFORM SUPPORT
+M:	Benson Leung <bleung@chromium.org>
 M:	Olof Johansson <olof@lixom.net>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform.git
 F:	drivers/platform/chrome/
 
 CISCO VIC ETHERNET NIC DRIVER

drivers/mfd/cros_ec.c

@@ -54,12 +54,19 @@ static const struct mfd_cell ec_pd_cell = {
 static irqreturn_t ec_irq_thread(int irq, void *data)
 {
 	struct cros_ec_device *ec_dev = data;
+	bool wake_event = true;
 	int ret;
 
-	if (device_may_wakeup(ec_dev->dev))
+	ret = cros_ec_get_next_event(ec_dev, &wake_event);
+
+	/*
+	 * Signal only if wake host events or any interrupt if
+	 * cros_ec_get_next_event() returned an error (default value for
+	 * wake_event is true)
+	 */
+	if (wake_event && device_may_wakeup(ec_dev->dev))
 		pm_wakeup_event(ec_dev->dev, 0);
 
-	ret = cros_ec_get_next_event(ec_dev);
 	if (ret > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
 					     0, ec_dev);
@@ -224,7 +231,7 @@ EXPORT_SYMBOL(cros_ec_suspend);
 
 static void cros_ec_drain_events(struct cros_ec_device *ec_dev)
 {
-	while (cros_ec_get_next_event(ec_dev) > 0)
+	while (cros_ec_get_next_event(ec_dev, NULL) > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
 					     1, ec_dev);
 }

drivers/platform/chrome/Kconfig

@@ -49,7 +49,7 @@ config CROS_EC_CHARDEV
 
 config CROS_EC_LPC
         tristate "ChromeOS Embedded Controller (LPC)"
-        depends on MFD_CROS_EC && (X86 || COMPILE_TEST)
+        depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
         help
           If you say Y here, you get support for talking to the ChromeOS EC
           over an LPC bus. This uses a simple byte-level protocol with a
@@ -59,6 +59,18 @@ config CROS_EC_LPC
           To compile this driver as a module, choose M here: the
           module will be called cros_ec_lpc.
 
+config CROS_EC_LPC_MEC
+	bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
+	depends on CROS_EC_LPC
+	default n
+	help
+	  If you say Y here, a variant LPC protocol for the Microchip EC
+	  will be used. Note that this variant is not backward compatible
+	  with non-Microchip ECs.
+
+	  If you have a ChromeOS Embedded Controller Microchip EC variant
+	  choose Y here.
+
 config CROS_EC_PROTO
         bool
         help

drivers/platform/chrome/Makefile

@@ -2,8 +2,11 @@
 obj-$(CONFIG_CHROMEOS_LAPTOP)		+= chromeos_laptop.o
 obj-$(CONFIG_CHROMEOS_PSTORE)		+= chromeos_pstore.o
 cros_ec_devs-objs			:= cros_ec_dev.o cros_ec_sysfs.o \
-					   cros_ec_lightbar.o cros_ec_vbc.o
+					   cros_ec_lightbar.o cros_ec_vbc.o \
+					   cros_ec_debugfs.o
 obj-$(CONFIG_CROS_EC_CHARDEV)		+= cros_ec_devs.o
-obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpc.o
+cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_reg.o
+cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)	+= cros_ec_lpc_mec.o
+obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o
 obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o
 obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT)	+= cros_kbd_led_backlight.o

drivers/platform/chrome/cros_ec_debugfs.h

+/*
+ * Copyright 2015 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DRV_CROS_EC_DEBUGFS_H_
+#define _DRV_CROS_EC_DEBUGFS_H_
+
+#include "cros_ec_dev.h"
+
+/* debugfs stuff */
+int cros_ec_debugfs_init(struct cros_ec_dev *ec);
+void cros_ec_debugfs_remove(struct cros_ec_dev *ec);
+
+#endif  /* _DRV_CROS_EC_DEBUGFS_H_ */

drivers/platform/chrome/cros_ec_dev.c

@@ -21,9 +21,11 @@
 #include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 
+#include "cros_ec_debugfs.h"
 #include "cros_ec_dev.h"
 
 /* Device variables */
@@ -427,10 +429,16 @@ static int ec_device_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
+	if (cros_ec_debugfs_init(ec))
+		dev_warn(dev, "failed to create debugfs directory\n");
+
 	/* check whether this EC is a sensor hub. */
 	if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
 		cros_ec_sensors_register(ec);
 
+	/* Take control of the lightbar from the EC. */
+	lb_manual_suspend_ctrl(ec, 1);
+
 	return 0;
 
 failed:
@@ -441,6 +449,12 @@ static int ec_device_probe(struct platform_device *pdev)
 static int ec_device_remove(struct platform_device *pdev)
 {
 	struct cros_ec_dev *ec = dev_get_drvdata(&pdev->dev);
+
+	/* Let the EC take over the lightbar again. */
+	lb_manual_suspend_ctrl(ec, 0);
+
+	cros_ec_debugfs_remove(ec);
+
 	cdev_del(&ec->cdev);
 	device_unregister(&ec->class_dev);
 	return 0;
@@ -452,9 +466,35 @@ static const struct platform_device_id cros_ec_id[] = {
 };
 MODULE_DEVICE_TABLE(platform, cros_ec_id);
 
+static __maybe_unused int ec_device_suspend(struct device *dev)
+{
+	struct cros_ec_dev *ec = dev_get_drvdata(dev);
+
+	lb_suspend(ec);
+
+	return 0;
+}
+
+static __maybe_unused int ec_device_resume(struct device *dev)
+{
+	struct cros_ec_dev *ec = dev_get_drvdata(dev);
+
+	lb_resume(ec);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cros_ec_dev_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend = ec_device_suspend,
+	.resume = ec_device_resume,
+#endif
+};
+
 static struct platform_driver cros_ec_dev_driver = {
 	.driver = {
 		.name = "cros-ec-ctl",
+		.pm = &cros_ec_dev_pm_ops,
 	},
 	.probe = ec_device_probe,
 	.remove = ec_device_remove,

drivers/platform/chrome/cros_ec_dev.h

@@ -43,4 +43,10 @@ struct cros_ec_readmem {
 #define CROS_EC_DEV_IOCXCMD   _IOWR(CROS_EC_DEV_IOC, 0, struct cros_ec_command)
 #define CROS_EC_DEV_IOCRDMEM  _IOWR(CROS_EC_DEV_IOC, 1, struct cros_ec_readmem)
 
+/* Lightbar utilities */
+extern bool ec_has_lightbar(struct cros_ec_dev *ec);
+extern int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable);
+extern int lb_suspend(struct cros_ec_dev *ec);
+extern int lb_resume(struct cros_ec_dev *ec);
+
 #endif /* _CROS_EC_DEV_H_ */

drivers/platform/chrome/cros_ec_lightbar.c

@@ -38,6 +38,13 @@
 /* Rate-limit the lightbar interface to prevent DoS. */
 static unsigned long lb_interval_jiffies = 50 * HZ / 1000;
 
+/*
+ * Whether or not we have given userspace control of the lightbar.
+ * If this is true, we won't do anything during suspend/resume.
+ */
+static bool userspace_control;
+static struct cros_ec_dev *ec_with_lightbar;
+
 static ssize_t interval_msec_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
@@ -295,7 +302,8 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
 
 static char const *seqname[] = {
 	"ERROR", "S5", "S3", "S0", "S5S3", "S3S0",
-	"S0S3", "S3S5", "STOP", "RUN", "PULSE", "TEST", "KONAMI",
+	"S0S3", "S3S5", "STOP", "RUN", "KONAMI",
+	"TAP", "PROGRAM",
 };
 
 static ssize_t sequence_show(struct device *dev,
@@ -340,6 +348,89 @@ static ssize_t sequence_show(struct device *dev,
 	return ret;
 }
 
+static int lb_send_empty_cmd(struct cros_ec_dev *ec, uint8_t cmd)
+{
+	struct ec_params_lightbar *param;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = alloc_lightbar_cmd_msg(ec);
+	if (!msg)
+		return -ENOMEM;
+
+	param = (struct ec_params_lightbar *)msg->data;
+	param->cmd = cmd;
+
+	ret = lb_throttle();
+	if (ret)
+		goto error;
+
+	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	if (ret < 0)
+		goto error;
+	if (msg->result != EC_RES_SUCCESS) {
+		ret = -EINVAL;
+		goto error;
+	}
+	ret = 0;
+error:
+	kfree(msg);
+
+	return ret;
+}
+
+int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable)
+{
+	struct ec_params_lightbar *param;
+	struct cros_ec_command *msg;
+	int ret;
+
+	if (ec != ec_with_lightbar)
+		return 0;
+
+	msg = alloc_lightbar_cmd_msg(ec);
+	if (!msg)
+		return -ENOMEM;
+
+	param = (struct ec_params_lightbar *)msg->data;
+
+	param->cmd = LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL;
+	param->manual_suspend_ctrl.enable = enable;
+
+	ret = lb_throttle();
+	if (ret)
+		goto error;
+
+	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	if (ret < 0)
+		goto error;
+	if (msg->result != EC_RES_SUCCESS) {
+		ret = -EINVAL;
+		goto error;
+	}
+	ret = 0;
+error:
+	kfree(msg);
+
+	return ret;
+}
+
+int lb_suspend(struct cros_ec_dev *ec)
+{
+	if (userspace_control || ec != ec_with_lightbar)
+		return 0;
+
+	return lb_send_empty_cmd(ec, LIGHTBAR_CMD_SUSPEND);
+}
+
+int lb_resume(struct cros_ec_dev *ec)
+{
+	if (userspace_control || ec != ec_with_lightbar)
+		return 0;
+
+	return lb_send_empty_cmd(ec, LIGHTBAR_CMD_RESUME);
+}
+
 static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
@@ -390,6 +481,93 @@ static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
 	return ret;
 }
 
+static ssize_t program_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	int extra_bytes, max_size, ret;
+	struct ec_params_lightbar *param;
+	struct cros_ec_command *msg;
+	struct cros_ec_dev *ec = container_of(dev, struct cros_ec_dev,
+					      class_dev);
+
+	/*
+	 * We might need to reject the program for size reasons. The EC
+	 * enforces a maximum program size, but we also don't want to try
+	 * and send a program that is too big for the protocol. In order
+	 * to ensure the latter, we also need to ensure we have extra bytes
+	 * to represent the rest of the packet.
+	 */
+	extra_bytes = sizeof(*param) - sizeof(param->set_program.data);
+	max_size = min(EC_LB_PROG_LEN, ec->ec_dev->max_request - extra_bytes);
+	if (count > max_size) {
+		dev_err(dev, "Program is %u bytes, too long to send (max: %u)",
+			(unsigned int)count, max_size);
+
+		return -EINVAL;
+	}
+
+	msg = alloc_lightbar_cmd_msg(ec);
+	if (!msg)
+		return -ENOMEM;
+
+	ret = lb_throttle();
+	if (ret)
+		goto exit;
+
+	dev_info(dev, "Copying %zu byte program to EC", count);
+
+	param = (struct ec_params_lightbar *)msg->data;
+	param->cmd = LIGHTBAR_CMD_SET_PROGRAM;
+
+	param->set_program.size = count;
+	memcpy(param->set_program.data, buf, count);
+
+	/*
+	 * We need to set the message size manually or else it will use
+	 * EC_LB_PROG_LEN. This might be too long, and the program
+	 * is unlikely to use all of the space.
+	 */
+	msg->outsize = count + extra_bytes;
+
+	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	if (ret < 0)
+		goto exit;
+	if (msg->result != EC_RES_SUCCESS) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = count;
+exit:
+	kfree(msg);
+
+	return ret;
+}
+
+static ssize_t userspace_control_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%d\n", userspace_control);
+}
+
+static ssize_t userspace_control_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	bool enable;
+	int ret;
+
+	ret = strtobool(buf, &enable);
+	if (ret < 0)
+		return ret;
+
+	userspace_control = enable;
+
+	return count;
+}
+
 /* Module initialization */
 
 static DEVICE_ATTR_RW(interval_msec);
@@ -397,15 +575,25 @@ static DEVICE_ATTR_RO(version);
 static DEVICE_ATTR_WO(brightness);
 static DEVICE_ATTR_WO(led_rgb);
 static DEVICE_ATTR_RW(sequence);
+static DEVICE_ATTR_WO(program);
+static DEVICE_ATTR_RW(userspace_control);
+
 static struct attribute *__lb_cmds_attrs[] = {
 	&dev_attr_interval_msec.attr,
 	&dev_attr_version.attr,
 	&dev_attr_brightness.attr,
 	&dev_attr_led_rgb.attr,
 	&dev_attr_sequence.attr,
+	&dev_attr_program.attr,
+	&dev_attr_userspace_control.attr,
 	NULL,
 };
 
+bool ec_has_lightbar(struct cros_ec_dev *ec)
+{
+	return !!get_lightbar_version(ec, NULL, NULL);
+}
+
 static umode_t cros_ec_lightbar_attrs_are_visible(struct kobject *kobj,
 						  struct attribute *a, int n)
 {
@@ -422,10 +610,11 @@ static umode_t cros_ec_lightbar_attrs_are_visible(struct kobject *kobj,
 		return 0;
 
 	/* Only instantiate this stuff if the EC has a lightbar */
-	if (get_lightbar_version(ec, NULL, NULL))
+	if (ec_has_lightbar(ec)) {
+		ec_with_lightbar = ec;
 		return a->mode;
-	else
-		return 0;
+	}
+	return 0;
 }
 
 struct attribute_group cros_ec_lightbar_attr_group = {

drivers/platform/chrome/cros_ec_lpc.c

@@ -21,24 +21,29 @@
  * expensive.
  */
 
+#include <linux/acpi.h>
 #include <linux/dmi.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/mfd/cros_ec_commands.h>
+#include <linux/mfd/cros_ec_lpc_reg.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/printk.h>
 
-#define DRV_NAME "cros_ec_lpc"
+#define DRV_NAME "cros_ec_lpcs"
+#define ACPI_DRV_NAME "GOOG0004"
 
 static int ec_response_timed_out(void)
 {
 	unsigned long one_second = jiffies + HZ;
+	u8 data;
 
 	usleep_range(200, 300);
 	do {
-		if (!(inb(EC_LPC_ADDR_HOST_CMD) & EC_LPC_STATUS_BUSY_MASK))
+		if (!(cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_CMD, 1, &data) &
+		    EC_LPC_STATUS_BUSY_MASK))
 			return 0;
 		usleep_range(100, 200);
 	} while (time_before(jiffies, one_second));
@@ -51,21 +56,20 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
 {
 	struct ec_host_request *request;
 	struct ec_host_response response;
-	u8 sum = 0;
-	int i;
+	u8 sum;
 	int ret = 0;
 	u8 *dout;
 
 	ret = cros_ec_prepare_tx(ec, msg);
 
 	/* Write buffer */
-	for (i = 0; i < ret; i++)
-		outb(ec->dout[i], EC_LPC_ADDR_HOST_PACKET + i);
+	cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
 
 	request = (struct ec_host_request *)ec->dout;
 
 	/* Here we go */
-	outb(EC_COMMAND_PROTOCOL_3, EC_LPC_ADDR_HOST_CMD);
+	sum = EC_COMMAND_PROTOCOL_3;
+	cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
 
 	if (ec_response_timed_out()) {
 		dev_warn(ec->dev, "EC responsed timed out\n");
@@ -74,17 +78,15 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
 	}
 
 	/* Check result */
-	msg->result = inb(EC_LPC_ADDR_HOST_DATA);
+	msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
 	ret = cros_ec_check_result(ec, msg);
 	if (ret)
 		goto done;
 
 	/* Read back response */
 	dout = (u8 *)&response;
-	for (i = 0; i < sizeof(response); i++) {
-		dout[i] = inb(EC_LPC_ADDR_HOST_PACKET + i);
-		sum += dout[i];
-	}
+	sum = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
+				     dout);
 
 	msg->result = response.result;
 
@@ -97,11 +99,9 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
 	}
 
 	/* Read response and process checksum */
-	for (i = 0; i < response.data_len; i++) {
-		msg->data[i] =
-			inb(EC_LPC_ADDR_HOST_PACKET + sizeof(response) + i);
-		sum += msg->data[i];
-	}
+	sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET +
+				      sizeof(response), response.data_len,
+				      msg->data);
 
 	if (sum) {
 		dev_err(ec->dev,
@@ -121,8 +121,7 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
 				struct cros_ec_command *msg)
 {
 	struct ec_lpc_host_args args;
-	int csum;
-	int i;
+	u8 sum;
 	int ret = 0;
 
 	if (msg->outsize > EC_PROTO2_MAX_PARAM_SIZE ||
@@ -139,24 +138,20 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
 	args.data_size = msg->outsize;
 
 	/* Initialize checksum */
-	csum = msg->command + args.flags +
-		args.command_version + args.data_size;
+	sum = msg->command + args.flags + args.command_version + args.data_size;
 
 	/* Copy data and update checksum */
-	for (i = 0; i < msg->outsize; i++) {
-		outb(msg->data[i], EC_LPC_ADDR_HOST_PARAM + i);
-		csum += msg->data[i];
-	}
+	sum += cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
+				       msg->data);
 
 	/* Finalize checksum and write args */
-	args.checksum = csum & 0xFF;
-	outb(args.flags, EC_LPC_ADDR_HOST_ARGS);
-	outb(args.command_version, EC_LPC_ADDR_HOST_ARGS + 1);
-	outb(args.data_size, EC_LPC_ADDR_HOST_ARGS + 2);
-	outb(args.checksum, EC_LPC_ADDR_HOST_ARGS + 3);
+	args.checksum = sum;
+	cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
+				(u8 *)&args);
 
 	/* Here we go */
-	outb(msg->command, EC_LPC_ADDR_HOST_CMD);
+	sum = msg->command;
+	cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
 
 	if (ec_response_timed_out()) {
 		dev_warn(ec->dev, "EC responsed timed out\n");
@@ -165,16 +160,14 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
 	}
 
 	/* Check result */
-	msg->result = inb(EC_LPC_ADDR_HOST_DATA);
+	msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
 	ret = cros_ec_check_result(ec, msg);
 	if (ret)
 		goto done;
 
 	/* Read back args */
-	args.flags = inb(EC_LPC_ADDR_HOST_ARGS);
-	args.command_version = inb(EC_LPC_ADDR_HOST_ARGS + 1);
-	args.data_size = inb(EC_LPC_ADDR_HOST_ARGS + 2);
-	args.checksum = inb(EC_LPC_ADDR_HOST_ARGS + 3);
+	cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
+			       (u8 *)&args);
 
 	if (args.data_size > msg->insize) {
 		dev_err(ec->dev,
@@ -185,20 +178,17 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
 	}
 
 	/* Start calculating response checksum */
-	csum = msg->command + args.flags +
-		args.command_version + args.data_size;
+	sum = msg->command + args.flags + args.command_version + args.data_size;
 
 	/* Read response and update checksum */
-	for (i = 0; i < args.data_size; i++) {
-		msg->data[i] = inb(EC_LPC_ADDR_HOST_PARAM + i);
-		csum += msg->data[i];
-	}
+	sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PARAM, args.data_size,
+				      msg->data);
 
 	/* Verify checksum */
-	if (args.checksum != (csum & 0xFF)) {
+	if (args.checksum != sum) {
 		dev_err(ec->dev,
 			"bad packet checksum, expected %02x, got %02x\n",
-			args.checksum, csum & 0xFF);
+			args.checksum, sum);
 		ret = -EBADMSG;
 		goto done;
 	}
@@ -222,14 +212,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
 
 	/* fixed length */
 	if (bytes) {
-		for (; cnt < bytes; i++, s++, cnt++)
-			*s = inb(EC_LPC_ADDR_MEMMAP + i);
-		return cnt;
+		cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
+		return bytes;
 	}
 
 	/* string */
 	for (; i < EC_MEMMAP_SIZE; i++, s++) {
-		*s = inb(EC_LPC_ADDR_MEMMAP + i);
+		cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + i, 1, s);
 		cnt++;
 		if (!*s)
 			break;
@@ -238,10 +227,23 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
 	return cnt;
 }
 
+static void cros_ec_lpc_acpi_notify(acpi_handle device, u32 value, void *data)
+{
+	struct cros_ec_device *ec_dev = data;
+
+	if (ec_dev->mkbp_event_supported &&
+	    cros_ec_get_next_event(ec_dev, NULL) > 0)
+		blocking_notifier_call_chain(&ec_dev->event_notifier, 0,
+					     ec_dev);
+}
+
 static int cros_ec_lpc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct acpi_device *adev;
+	acpi_status status;
 	struct cros_ec_device *ec_dev;
+	u8 buf[2];
 	int ret;
 
 	if (!devm_request_region(dev, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE,
@@ -250,8 +252,8 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	if ((inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID) != 'E') ||
-	    (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID + 1) != 'C')) {
+	cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
+	if (buf[0] != 'E' || buf[1] != 'C') {
 		dev_err(dev, "EC ID not detected\n");
 		return -ENODEV;
 	}
@@ -287,12 +289,33 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/*
+	 * Connect a notify handler to process MKBP messages if we have a
+	 * companion ACPI device.
+	 */
+	adev = ACPI_COMPANION(dev);
+	if (adev) {
+		status = acpi_install_notify_handler(adev->handle,
+						     ACPI_ALL_NOTIFY,
+						     cros_ec_lpc_acpi_notify,
+						     ec_dev);
+		if (ACPI_FAILURE(status))
+			dev_warn(dev, "Failed to register notifier %08x\n",
+				 status);
+	}
+
 	return 0;
 }
 
 static int cros_ec_lpc_remove(struct platform_device *pdev)
 {
 	struct cros_ec_device *ec_dev;
+	struct acpi_device *adev;
+
+	adev = ACPI_COMPANION(&pdev->dev);
+	if (adev)
+		acpi_remove_notify_handler(adev->handle, ACPI_ALL_NOTIFY,
+					   cros_ec_lpc_acpi_notify);
 
 	ec_dev = platform_get_drvdata(pdev);
 	cros_ec_remove(ec_dev);
@@ -300,6 +323,12 @@ static int cros_ec_lpc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct acpi_device_id cros_ec_lpc_acpi_device_ids[] = {
+	{ ACPI_DRV_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, cros_ec_lpc_acpi_device_ids);
+
 static struct dmi_system_id cros_ec_lpc_dmi_table[] __initdata = {
 	{
 		/*
@@ -337,18 +366,36 @@ static struct dmi_system_id cros_ec_lpc_dmi_table[] __initdata = {
 };
 MODULE_DEVICE_TABLE(dmi, cros_ec_lpc_dmi_table);
 
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_lpc_suspend(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+	return cros_ec_suspend(ec_dev);
+}
+
+static int cros_ec_lpc_resume(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+	return cros_ec_resume(ec_dev);
+}
+#endif
+
+const struct dev_pm_ops cros_ec_lpc_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(cros_ec_lpc_suspend, cros_ec_lpc_resume)
+};
+
 static struct platform_driver cros_ec_lpc_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.acpi_match_table = cros_ec_lpc_acpi_device_ids,
+		.pm = &cros_ec_lpc_pm_ops,
 	},
 	.probe = cros_ec_lpc_probe,
 	.remove = cros_ec_lpc_remove,
 };
 
-static struct platform_device cros_ec_lpc_device = {
-	.name = DRV_NAME
-};
-
 static int __init cros_ec_lpc_init(void)
 {
 	int ret;
@@ -358,18 +405,13 @@ static int __init cros_ec_lpc_init(void)
 		return -ENODEV;
 	}
 
+	cros_ec_lpc_reg_init();
+
 	/* Register the driver */
 	ret = platform_driver_register(&cros_ec_lpc_driver);
 	if (ret) {
 		pr_err(DRV_NAME ": can't register driver: %d\n", ret);
-		return ret;
-	}
-
-	/* Register the device, and it'll get hooked up automatically */
-	ret = platform_device_register(&cros_ec_lpc_device);
-	if (ret) {
-		pr_err(DRV_NAME ": can't register device: %d\n", ret);
-		platform_driver_unregister(&cros_ec_lpc_driver);
+		cros_ec_lpc_reg_destroy();
 		return ret;
 	}
 
@@ -378,8 +420,8 @@ static int __init cros_ec_lpc_init(void)
 
 static void __exit cros_ec_lpc_exit(void)
 {
-	platform_device_unregister(&cros_ec_lpc_device);
 	platform_driver_unregister(&cros_ec_lpc_driver);
+	cros_ec_lpc_reg_destroy();
 }
 
 module_init(cros_ec_lpc_init);

drivers/platform/chrome/cros_ec_lpc_mec.c

+/*
+ * cros_ec_lpc_mec - LPC variant I/O for Microchip EC
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+ * but everything else (including deghosting) is done here.  The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/mfd/cros_ec_lpc_mec.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+/*
+ * This mutex must be held while accessing the EMI unit. We can't rely on the
+ * EC mutex because memmap data may be accessed without it being held.
+ */
+static struct mutex io_mutex;
+
+/*
+ * cros_ec_lpc_mec_emi_write_address
+ *
+ * Initialize EMI read / write at a given address.
+ *
+ * @addr:        Starting read / write address
+ * @access_type: Type of access, typically 32-bit auto-increment
+ */
+static void cros_ec_lpc_mec_emi_write_address(u16 addr,
+			enum cros_ec_lpc_mec_emi_access_mode access_type)
+{
+	/* Address relative to start of EMI range */
+	addr -= MEC_EMI_RANGE_START;
+	outb((addr & 0xfc) | access_type, MEC_EMI_EC_ADDRESS_B0);
+	outb((addr >> 8) & 0x7f, MEC_EMI_EC_ADDRESS_B1);
+}
+
+/*
+ * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port
+ *
+ * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request
+ * @offset:  Base read / write address
+ * @length:  Number of bytes to read / write
+ * @buf:     Destination / source buffer
+ *
+ * @return 8-bit checksum of all bytes read / written
+ */
+u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type,
+			    unsigned int offset, unsigned int length,
+			    u8 *buf)
+{
+	int i = 0;
+	int io_addr;
+	u8 sum = 0;
+	enum cros_ec_lpc_mec_emi_access_mode access, new_access;
+
+	/*
+	 * Long access cannot be used on misaligned data since reading B0 loads
+	 * the data register and writing B3 flushes.
+	 */
+	if (offset & 0x3 || length < 4)
+		access = ACCESS_TYPE_BYTE;
+	else
+		access = ACCESS_TYPE_LONG_AUTO_INCREMENT;
+
+	mutex_lock(&io_mutex);
+
+	/* Initialize I/O at desired address */
+	cros_ec_lpc_mec_emi_write_address(offset, access);
+
+	/* Skip bytes in case of misaligned offset */
+	io_addr = MEC_EMI_EC_DATA_B0 + (offset & 0x3);
+	while (i < length) {
+		while (io_addr <= MEC_EMI_EC_DATA_B3) {
+			if (io_type == MEC_IO_READ)
+				buf[i] = inb(io_addr++);
+			else
+				outb(buf[i], io_addr++);
+
+			sum += buf[i++];
+			offset++;
+
+			/* Extra bounds check in case of misaligned length */
+			if (i == length)
+				goto done;
+		}
+
+		/*
+		 * Use long auto-increment access except for misaligned write,
+		 * since writing B3 triggers the flush.
+		 */
+		if (length - i < 4 && io_type == MEC_IO_WRITE)
+			new_access = ACCESS_TYPE_BYTE;
+		else
+			new_access = ACCESS_TYPE_LONG_AUTO_INCREMENT;
+
+		if (new_access != access ||
+		    access != ACCESS_TYPE_LONG_AUTO_INCREMENT) {
+			access = new_access;
+			cros_ec_lpc_mec_emi_write_address(offset, access);
+		}
+
+		/* Access [B0, B3] on each loop pass */
+		io_addr = MEC_EMI_EC_DATA_B0;
+	}
+
+done:
+	mutex_unlock(&io_mutex);
+
+	return sum;
+}
+EXPORT_SYMBOL(cros_ec_lpc_io_bytes_mec);
+
+void cros_ec_lpc_mec_init(void)
+{
+	mutex_init(&io_mutex);
+}
+EXPORT_SYMBOL(cros_ec_lpc_mec_init);
+
+void cros_ec_lpc_mec_destroy(void)
+{
+	mutex_destroy(&io_mutex);
+}
+EXPORT_SYMBOL(cros_ec_lpc_mec_destroy);

drivers/platform/chrome/cros_ec_lpc_reg.c

+/*
+ * cros_ec_lpc_reg - LPC access to the Chrome OS Embedded Controller
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+ * but everything else (including deghosting) is done here.  The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#include <linux/io.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/mfd/cros_ec_lpc_mec.h>
+
+static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
+{
+	int i;
+	int sum = 0;
+
+	for (i = 0; i < length; ++i) {
+		dest[i] = inb(offset + i);
+		sum += dest[i];
+	}
+
+	/* Return checksum of all bytes read */
+	return sum;
+}
+
+static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
+{
+	int i;
+	int sum = 0;
+
+	for (i = 0; i < length; ++i) {
+		outb(msg[i], offset + i);
+		sum += msg[i];
+	}
+
+	/* Return checksum of all bytes written */
+	return sum;
+}
+
+#ifdef CONFIG_CROS_EC_LPC_MEC
+
+u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
+{
+	if (length == 0)
+		return 0;
+
+	/* Access desired range through EMI interface */
+	if (offset >= MEC_EMI_RANGE_START && offset <= MEC_EMI_RANGE_END) {
+		/* Ensure we don't straddle EMI region */
+		if (WARN_ON(offset + length - 1 > MEC_EMI_RANGE_END))
+			return 0;
+
+		return cros_ec_lpc_io_bytes_mec(MEC_IO_READ, offset, length,
+						dest);
+	}
+
+	if (WARN_ON(offset + length > MEC_EMI_RANGE_START &&
+		    offset < MEC_EMI_RANGE_START))
+		return 0;
+
+	return lpc_read_bytes(offset, length, dest);
+}
+
+u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
+{
+	if (length == 0)
+		return 0;
+
+	/* Access desired range through EMI interface */
+	if (offset >= MEC_EMI_RANGE_START && offset <= MEC_EMI_RANGE_END) {
+		/* Ensure we don't straddle EMI region */
+		if (WARN_ON(offset + length - 1 > MEC_EMI_RANGE_END))
+			return 0;
+
+		return cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, offset, length,
+						msg);
+	}
+
+	if (WARN_ON(offset + length > MEC_EMI_RANGE_START &&
+		    offset < MEC_EMI_RANGE_START))
+		return 0;
+
+	return lpc_write_bytes(offset, length, msg);
+}
+
+void cros_ec_lpc_reg_init(void)
+{
+	cros_ec_lpc_mec_init();
+}
+
+void cros_ec_lpc_reg_destroy(void)
+{
+	cros_ec_lpc_mec_destroy();
+}
+
+#else /* CONFIG_CROS_EC_LPC_MEC */
+
+u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
+{
+	return lpc_read_bytes(offset, length, dest);
+}
+
+u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
+{
+	return lpc_write_bytes(offset, length, msg);
+}
+
+void cros_ec_lpc_reg_init(void)
+{
+}
+
+void cros_ec_lpc_reg_destroy(void)
+{
+}
+
+#endif /* CONFIG_CROS_EC_LPC_MEC */

drivers/platform/chrome/cros_ec_proto.c

@@ -150,6 +150,40 @@ int cros_ec_check_result(struct cros_ec_device *ec_dev,
 }
 EXPORT_SYMBOL(cros_ec_check_result);
 
+/*
+ * cros_ec_get_host_event_wake_mask
+ *
+ * Get the mask of host events that cause wake from suspend.
+ *
+ * @ec_dev: EC device to call
+ * @msg: message structure to use
+ * @mask: result when function returns >=0.
+ *
+ * LOCKING:
+ * the caller has ec_dev->lock mutex, or the caller knows there is
+ * no other command in progress.
+ */
+static int cros_ec_get_host_event_wake_mask(struct cros_ec_device *ec_dev,
+					    struct cros_ec_command *msg,
+					    uint32_t *mask)
+{
+	struct ec_response_host_event_mask *r;
+	int ret;
+
+	msg->command = EC_CMD_HOST_EVENT_GET_WAKE_MASK;
+	msg->version = 0;
+	msg->outsize = 0;
+	msg->insize = sizeof(*r);
+
+	ret = send_command(ec_dev, msg);
+	if (ret > 0) {
+		r = (struct ec_response_host_event_mask *)msg->data;
+		*mask = r->mask;
+	}
+
+	return ret;
+}
+
 static int cros_ec_host_command_proto_query(struct cros_ec_device *ec_dev,
 					    int devidx,
 					    struct cros_ec_command *msg)
@@ -235,6 +269,22 @@ static int cros_ec_host_command_proto_query_v2(struct cros_ec_device *ec_dev)
 	return ret;
 }
 
+/*
+ * cros_ec_get_host_command_version_mask
+ *
+ * Get the version mask of a given command.
+ *
+ * @ec_dev: EC device to call
+ * @msg: message structure to use
+ * @cmd: command to get the version of.
+ * @mask: result when function returns 0.
+ *
+ * @return 0 on success, error code otherwise
+ *
+ * LOCKING:
+ * the caller has ec_dev->lock mutex or the caller knows there is
+ * no other command in progress.
+ */
 static int cros_ec_get_host_command_version_mask(struct cros_ec_device *ec_dev,
 	u16 cmd, u32 *mask)
 {
@@ -256,7 +306,7 @@ static int cros_ec_get_host_command_version_mask(struct cros_ec_device *ec_dev,
 	pver = (struct ec_params_get_cmd_versions *)msg->data;
 	pver->cmd = cmd;
 
-	ret = cros_ec_cmd_xfer(ec_dev, msg);
+	ret = send_command(ec_dev, msg);
 	if (ret > 0) {
 		rver = (struct ec_response_get_cmd_versions *)msg->data;
 		*mask = rver->version_mask;
@@ -371,6 +421,17 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev)
 	else
 		ec_dev->mkbp_event_supported = 1;
 
+	/*
+	 * Get host event wake mask, assume all events are wake events
+	 * if unavailable.
+	 */
+	ret = cros_ec_get_host_event_wake_mask(ec_dev, proto_msg,
+					       &ec_dev->host_event_wake_mask);
+	if (ret < 0)
+		ec_dev->host_event_wake_mask = U32_MAX;
+
+	ret = 0;
+
 exit:
 	kfree(proto_msg);
 	return ret;
@@ -486,11 +547,54 @@ static int get_keyboard_state_event(struct cros_ec_device *ec_dev)
 	return ec_dev->event_size;
 }
 
-int cros_ec_get_next_event(struct cros_ec_device *ec_dev)
+int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
 {
-	if (ec_dev->mkbp_event_supported)
-		return get_next_event(ec_dev);
-	else
-		return get_keyboard_state_event(ec_dev);
+	u32 host_event;
+	int ret;
+
+	if (!ec_dev->mkbp_event_supported) {
+		ret = get_keyboard_state_event(ec_dev);
+		if (ret < 0)
+			return ret;
+
+		if (wake_event)
+			*wake_event = true;
+
+		return ret;
+	}
+
+	ret = get_next_event(ec_dev);
+	if (ret < 0)
+		return ret;
+
+	if (wake_event) {
+		host_event = cros_ec_get_host_event(ec_dev);
+
+		/* Consider non-host_event as wake event */
+		*wake_event = !host_event ||
+			      !!(host_event & ec_dev->host_event_wake_mask);
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL(cros_ec_get_next_event);
+
+u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev)
+{
+	u32 host_event;
+
+	BUG_ON(!ec_dev->mkbp_event_supported);
+
+	if (ec_dev->event_data.event_type != EC_MKBP_EVENT_HOST_EVENT)
+		return 0;
+
+	if (ec_dev->event_size != sizeof(host_event)) {
+		dev_warn(ec_dev->dev, "Invalid host event size\n");
+		return 0;
+	}
+
+	host_event = get_unaligned_le32(&ec_dev->event_data.data.host_event);
+
+	return host_event;
+}
+EXPORT_SYMBOL(cros_ec_get_host_event);

include/linux/mfd/cros_ec.h

@@ -149,6 +149,7 @@ struct cros_ec_device {
 
 	struct ec_response_get_next_event event_data;
 	int event_size;
+	u32 host_event_wake_mask;
 };
 
 /**
@@ -172,6 +173,8 @@ struct cros_ec_platform {
 	u16 cmd_offset;
 };
 
+struct cros_ec_debugfs;
+
 /*
  * struct cros_ec_dev - ChromeOS EC device entry point
  *
@@ -179,6 +182,7 @@ struct cros_ec_platform {
  * @cdev: Character device structure in /dev
  * @ec_dev: cros_ec_device structure to talk to the physical device
  * @dev: pointer to the platform device
+ * @debug_info: cros_ec_debugfs structure for debugging information
  * @cmd_offset: offset to apply for each command.
  */
 struct cros_ec_dev {
@@ -186,6 +190,7 @@ struct cros_ec_dev {
 	struct cdev cdev;
 	struct cros_ec_device *ec_dev;
 	struct device *dev;
+	struct cros_ec_debugfs *debug_info;
 	u16 cmd_offset;
 	u32 features[2];
 };
@@ -295,10 +300,22 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev);
  * cros_ec_get_next_event -  Fetch next event from the ChromeOS EC
  *
  * @ec_dev: Device to fetch event from
+ * @wake_event: Pointer to a bool set to true upon return if the event might be
+ *              treated as a wake event. Ignored if null.
  *
  * Returns: 0 on success, Linux error number on failure
  */
-int cros_ec_get_next_event(struct cros_ec_device *ec_dev);
+int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
+
+/**
+ * cros_ec_get_host_event - Return a mask of event set by the EC.
+ *
+ * When MKBP is supported, when the EC raises an interrupt,
+ * We collect the events raised and call the functions in the ec notifier.
+ *
+ * This function is a helper to know which events are raised.
+ */
+u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
 
 /* sysfs stuff */
 extern struct attribute_group cros_ec_attr_group;

include/linux/mfd/cros_ec_commands.h

@@ -625,6 +625,10 @@ struct ec_params_get_cmd_versions {
 	uint8_t cmd;      /* Command to check */
 } __packed;
 
+struct ec_params_get_cmd_versions_v1 {
+	uint16_t cmd;     /* Command to check */
+} __packed;
+
 struct ec_response_get_cmd_versions {
 	/*
 	 * Mask of supported versions; use EC_VER_MASK() to compare with a
@@ -1158,13 +1162,20 @@ struct lightbar_params_v1 {
 	struct rgb_s color[8];			/* 0-3 are Google colors */
 } __packed;
 
+/* Lightbar program */
+#define EC_LB_PROG_LEN 192
+struct lightbar_program {
+	uint8_t size;
+	uint8_t data[EC_LB_PROG_LEN];
+};
+
 struct ec_params_lightbar {
 	uint8_t cmd;		      /* Command (see enum lightbar_command) */
 	union {
 		struct {
 			/* no args */
 		} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
-			version, get_brightness, get_demo;
+			version, get_brightness, get_demo, suspend, resume;
 
 		struct {
 			uint8_t num;
@@ -1182,8 +1193,13 @@ struct ec_params_lightbar {
 			uint8_t led;
 		} get_rgb;
 
+		struct {
+			uint8_t enable;
+		} manual_suspend_ctrl;
+
 		struct lightbar_params_v0 set_params_v0;
 		struct lightbar_params_v1 set_params_v1;
+		struct lightbar_program set_program;
 	};
 } __packed;
 
@@ -1216,7 +1232,8 @@ struct ec_response_lightbar {
 		struct {
 			/* no return params */
 		} off, on, init, set_brightness, seq, reg, set_rgb,
-			demo, set_params_v0, set_params_v1;
+			demo, set_params_v0, set_params_v1,
+			set_program, manual_suspend_ctrl, suspend, resume;
 	};
 } __packed;
 
@@ -1240,6 +1257,10 @@ enum lightbar_command {
 	LIGHTBAR_CMD_GET_DEMO = 15,
 	LIGHTBAR_CMD_GET_PARAMS_V1 = 16,
 	LIGHTBAR_CMD_SET_PARAMS_V1 = 17,
+	LIGHTBAR_CMD_SET_PROGRAM = 18,
+	LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19,
+	LIGHTBAR_CMD_SUSPEND = 20,
+	LIGHTBAR_CMD_RESUME = 21,
 	LIGHTBAR_NUM_CMDS
 };
 
@@ -2285,13 +2306,28 @@ struct ec_params_charge_control {
 #define EC_CMD_CONSOLE_SNAPSHOT 0x97
 
 /*
- * Read next chunk of data from saved snapshot.
+ * Read data from the saved snapshot. If the subcmd parameter is
+ * CONSOLE_READ_NEXT, this will return data starting from the beginning of
+ * the latest snapshot. If it is CONSOLE_READ_RECENT, it will start from the
+ * end of the previous snapshot.
+ *
+ * The params are only looked at in version >= 1 of this command. Prior
+ * versions will just default to CONSOLE_READ_NEXT behavior.
  *
  * Response is null-terminated string.  Empty string, if there is no more
  * remaining output.
  */
 #define EC_CMD_CONSOLE_READ 0x98
 
+enum ec_console_read_subcmd {
+	CONSOLE_READ_NEXT = 0,
+	CONSOLE_READ_RECENT
+};
+
+struct ec_params_console_read_v1 {
+	uint8_t subcmd; /* enum ec_console_read_subcmd */
+} __packed;
+
 /*****************************************************************************/
 
 /*

include/linux/mfd/cros_ec_lpc_mec.h

+/*
+ * cros_ec_lpc_mec - LPC variant I/O for Microchip EC
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+ * but everything else (including deghosting) is done here.  The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#ifndef __LINUX_MFD_CROS_EC_MEC_H
+#define __LINUX_MFD_CROS_EC_MEC_H
+
+#include <linux/mfd/cros_ec_commands.h>
+
+enum cros_ec_lpc_mec_emi_access_mode {
+	/* 8-bit access */
+	ACCESS_TYPE_BYTE = 0x0,
+	/* 16-bit access */
+	ACCESS_TYPE_WORD = 0x1,
+	/* 32-bit access */
+	ACCESS_TYPE_LONG = 0x2,
+	/*
+	 * 32-bit access, read or write of MEC_EMI_EC_DATA_B3 causes the
+	 * EC data register to be incremented.
+	 */
+	ACCESS_TYPE_LONG_AUTO_INCREMENT = 0x3,
+};
+
+enum cros_ec_lpc_mec_io_type {
+	MEC_IO_READ,
+	MEC_IO_WRITE,
+};
+
+/* Access IO ranges 0x800 thru 0x9ff using EMI interface instead of LPC */
+#define MEC_EMI_RANGE_START EC_HOST_CMD_REGION0
+#define MEC_EMI_RANGE_END   (EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE)
+
+/* EMI registers are relative to base */
+#define MEC_EMI_BASE 0x800
+#define MEC_EMI_HOST_TO_EC (MEC_EMI_BASE + 0)
+#define MEC_EMI_EC_TO_HOST (MEC_EMI_BASE + 1)
+#define MEC_EMI_EC_ADDRESS_B0 (MEC_EMI_BASE + 2)
+#define MEC_EMI_EC_ADDRESS_B1 (MEC_EMI_BASE + 3)
+#define MEC_EMI_EC_DATA_B0 (MEC_EMI_BASE + 4)
+#define MEC_EMI_EC_DATA_B1 (MEC_EMI_BASE + 5)
+#define MEC_EMI_EC_DATA_B2 (MEC_EMI_BASE + 6)
+#define MEC_EMI_EC_DATA_B3 (MEC_EMI_BASE + 7)
+
+/*
+ * cros_ec_lpc_mec_init
+ *
+ * Initialize MEC I/O.
+ */
+void cros_ec_lpc_mec_init(void);
+
+/*
+ * cros_ec_lpc_mec_destroy
+ *
+ * Cleanup MEC I/O.
+ */
+void cros_ec_lpc_mec_destroy(void);
+
+/**
+ * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port
+ *
+ * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request
+ * @offset:  Base read / write address
+ * @length:  Number of bytes to read / write
+ * @buf:     Destination / source buffer
+ *
+ * @return 8-bit checksum of all bytes read / written
+ */
+u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type,
+			    unsigned int offset, unsigned int length, u8 *buf);
+
+#endif /* __LINUX_MFD_CROS_EC_MEC_H */

include/linux/mfd/cros_ec_lpc_reg.h

+/*
+ * cros_ec_lpc_reg - LPC access to the Chrome OS Embedded Controller
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi).  The EC does debouncing,
+ * but everything else (including deghosting) is done here.  The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#ifndef __LINUX_MFD_CROS_EC_REG_H
+#define __LINUX_MFD_CROS_EC_REG_H
+
+/**
+ * cros_ec_lpc_read_bytes - Read bytes from a given LPC-mapped address.
+ * Returns 8-bit checksum of all bytes read.
+ *
+ * @offset: Base read address
+ * @length: Number of bytes to read
+ * @dest: Destination buffer
+ */
+u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest);
+
+/**
+ * cros_ec_lpc_write_bytes - Write bytes to a given LPC-mapped address.
+ * Returns 8-bit checksum of all bytes written.
+ *
+ * @offset: Base write address
+ * @length: Number of bytes to write
+ * @msg: Write data buffer
+ */
+u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg);
+
+/**
+ * cros_ec_lpc_reg_init
+ *
+ * Initialize register I/O.
+ */
+void cros_ec_lpc_reg_init(void);
+
+/**
+ * cros_ec_lpc_reg_destroy
+ *
+ * Cleanup reg I/O.
+ */
+void cros_ec_lpc_reg_destroy(void);
+
+#endif /* __LINUX_MFD_CROS_EC_REG_H */