Commit a4e36ae0 authored by Zhangfei Gao's avatar Zhangfei Gao Committed by Wei Xu

arm64: dts: hi3660: add resources for clock and reset

Add some resource nodes for clock and reset
Signed-off-by: default avatarZhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
parent cc59d2a0
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
*/ */
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3660-clock.h>
/ { / {
compatible = "hisilicon,hi3660"; compatible = "hisilicon,hi3660";
...@@ -141,18 +142,56 @@ soc { ...@@ -141,18 +142,56 @@ soc {
#size-cells = <2>; #size-cells = <2>;
ranges; ranges;
fixed_uart5: fixed_19_2M { crg_ctrl: crg_ctrl@fff35000 {
compatible = "fixed-clock"; compatible = "hisilicon,hi3660-crgctrl", "syscon";
#clock-cells = <0>; reg = <0x0 0xfff35000 0x0 0x1000>;
clock-frequency = <19200000>; #clock-cells = <1>;
clock-output-names = "fixed:uart5";
}; };
uart5: uart@fdf05000 { crg_rst: crg_rst_controller {
compatible = "hisilicon,hi3660-reset";
#reset-cells = <2>;
hisi,rst-syscon = <&crg_ctrl>;
};
pctrl: pctrl@e8a09000 {
compatible = "hisilicon,hi3660-pctrl", "syscon";
reg = <0x0 0xe8a09000 0x0 0x2000>;
#clock-cells = <1>;
};
pmuctrl: crg_ctrl@fff34000 {
compatible = "hisilicon,hi3660-pmuctrl", "syscon";
reg = <0x0 0xfff34000 0x0 0x1000>;
#clock-cells = <1>;
};
sctrl: sctrl@fff0a000 {
compatible = "hisilicon,hi3660-sctrl", "syscon";
reg = <0x0 0xfff0a000 0x0 0x1000>;
#clock-cells = <1>;
};
iomcu: iomcu@ffd7e000 {
compatible = "hisilicon,hi3660-iomcu", "syscon";
reg = <0x0 0xffd7e000 0x0 0x1000>;
#clock-cells = <1>;
};
iomcu_rst: reset {
compatible = "hisilicon,hi3660-reset";
hisi,rst-syscon = <&iomcu>;
#reset-cells = <2>;
};
uart5: serial@fdf05000 {
compatible = "arm,pl011", "arm,primecell"; compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>; reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&fixed_uart5 &fixed_uart5>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk"; clock-names = "uartclk", "apb_pclk";
status = "disabled"; status = "disabled";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment