{nl,cfg,mac}80211: fix the coding style related to mesh parameters

fix the coding style related to mesh parameters, especially the indentation,
as pointed out by Johannes Berg.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

include/linux/nl80211.h

@@ -2122,15 +2122,16 @@ enum nl80211_mntr_flags {
  *	until giving up on a path discovery (in milliseconds)
  *
  * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- * points receiving a PREQ shall consider the forwarding information from the
- * root to be valid. (TU = time unit)
+ *	points receiving a PREQ shall consider the forwarding information from
+ *	the root to be valid. (TU = time unit)
  *
  * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
  *	TUs) during which an MP can send only one action frame containing a PREQ
  *	reference element
  *
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- * that it takes for an HWMP information element to propagate across the mesh
+ *	that it takes for an HWMP information element to propagate across the
+ *	mesh
  *
  * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
@@ -2155,13 +2156,14 @@ enum nl80211_mntr_flags {
  *	threshold for average signal strength of candidate station to establish
  *	a peer link.
  *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
  * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
+ *	to synchronize to for 11s default synchronization method
+ *	(see 11C.12.2.2)
  *
  * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
  *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2203,35 +2205,37 @@ enum nl80211_meshconf_params {
  * @__NL80211_MESH_SETUP_INVALID: Internal use
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- * vendor specific path selection algorithm or disable it to use the default
- * HWMP.
+ *	vendor specific path selection algorithm or disable it to use the
+ *	default HWMP.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
  *	vendor specific path metric or disable it to use the default Airtime
  *	metric.
  *
  * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- * robust security network ie, or a vendor specific information element that
- * vendors will use to identify the path selection methods and metrics in use.
+ *	robust security network ie, or a vendor specific information element
+ *	that vendors will use to identify the path selection methods and
+ *	metrics in use.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
  *	daemon will be authenticating mesh candidates.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
- * Peering Management (MPM) and is implemented with the assistance of a
- * userspace daemon.  When this flag is set, the kernel will send peer
+ *	daemon will be securing peer link frames.  AMPE is a secured version of
+ *	Mesh Peering Management (MPM) and is implemented with the assistance of
+ *	a userspace daemon.  When this flag is set, the kernel will send peer
  *	management frames to a userspace daemon that will implement AMPE
- * functionality (security capabilities selection, key confirmation, and key
- * management).  When the flag is unset (default), the kernel can autonomously
- * complete (unsecured) mesh peering without the need of a userspace daemon.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *	functionality (security capabilities selection, key confirmation, and
+ *	key management).  When the flag is unset (default), the kernel can
+ *	autonomously complete (unsecured) mesh peering without the need of a
+ *	userspace daemon.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
  *	vendor specific synchronization method or disable it to use the default
  *	neighbor offset synchronization
  *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {

net/mac80211/cfg.c

@@ -1571,10 +1571,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 		conf->dot11MeshGateAnnouncementProtocol =
 			nconf->dot11MeshGateAnnouncementProtocol;
 	}
-	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) {
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask))
 		conf->dot11MeshHWMPRannInterval =
 			nconf->dot11MeshHWMPRannInterval;
-	}
 	if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask))
 		conf->dot11MeshForwarding = nconf->dot11MeshForwarding;
 	if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) {

net/wireless/nl80211.c

@@ -3492,7 +3492,6 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_ELEMENT_TTL] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR] = { .type = NLA_U32 },
-
 	[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
 	[NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
@@ -3504,8 +3503,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_HWMP_RANN_INTERVAL] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
-	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
-	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
+	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 },
+	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
 };
 
 static const struct nla_policy
@@ -3548,34 +3547,42 @@ do {\
 
 	/* Fill in the params struct */
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
-			mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
+				  mask, NL80211_MESHCONF_RETRY_TIMEOUT,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
-			mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16);
+				  mask, NL80211_MESHCONF_CONFIRM_TIMEOUT,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout,
-			mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16);
+				  mask, NL80211_MESHCONF_HOLDING_TIMEOUT,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks,
-			mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16);
+				  mask, NL80211_MESHCONF_MAX_PEER_LINKS,
+				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries,
-			mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
+				  mask, NL80211_MESHCONF_MAX_RETRIES,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
 				  mask, NL80211_MESHCONF_TTL, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl,
-			mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8);
+				  mask, NL80211_MESHCONF_ELEMENT_TTL,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
-			mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor,
-			mask, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
+				  mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+				  nla_get_u8);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, mask,
+				  NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
 				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
 				  mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
 				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time,
-			mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32);
+				  mask, NL80211_MESHCONF_PATH_REFRESH_TIME,
+				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout,
 				  mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
 				  nla_get_u16);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
-			mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, mask,
+				  NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
 				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
 				  mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
@@ -3584,15 +3591,12 @@ do {\
 				  mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
 				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshHWMPnetDiameterTraversalTime,
-			mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+				  dot11MeshHWMPnetDiameterTraversalTime, mask,
+				  NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
 				  nla_get_u16);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshHWMPRootMode, mask,
-			NL80211_MESHCONF_HWMP_ROOTMODE,
-			nla_get_u8);
-	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
-			dot11MeshHWMPRannInterval, mask,
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, mask,
+				  NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, mask,
 				  NL80211_MESHCONF_HWMP_RANN_INTERVAL,
 				  nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
@@ -3600,11 +3604,14 @@ do {\
 				  NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
 				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding,
-			mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
+				  mask, NL80211_MESHCONF_FORWARDING,
+				  nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
-			mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
+				  mask, NL80211_MESHCONF_RSSI_THRESHOLD,
+				  nla_get_u32);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
-			mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
+				  mask, NL80211_MESHCONF_HT_OPMODE,
+				  nla_get_u16);
 	if (mask_out)
 		*mask_out = mask;