Commit a50b7926 authored by Ahmad Fatoum's avatar Ahmad Fatoum Committed by Mark Brown

ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support

With higher channel counts, we may need higher clock rates.  Starting
with SAI v3.1 (i.MX8MM), we can bypass the divider and get a 1:1
bclk:mclk ratio. Add the necessary support.
Signed-off-by: default avatarViorel Suman <viorel.suman@nxp.com>
Signed-off-by: default avatarAhmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220302083428.3804687-8-s.hauer@pengutronix.deSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 1d4cbdf7
......@@ -347,6 +347,7 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
int adir = tx ? RX : TX;
int dir = tx ? TX : RX;
u32 id;
bool support_1_1_ratio = sai->verid.version >= 0x0301;
/* Don't apply to consumer mode */
if (sai->is_consumer_mode)
......@@ -367,7 +368,11 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
continue;
ratio = DIV_ROUND_CLOSEST(clk_rate, freq);
if (!ratio || ratio > 512 || ratio & 1)
if (!ratio || ratio > 512)
continue;
if (ratio == 1 && !support_1_1_ratio)
continue;
else if (ratio & 1)
continue;
diff = abs((long)clk_rate - ratio * freq);
......@@ -422,7 +427,15 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK,
FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_DIV_MASK, savediv / 2 - 1);
if (savediv == 1)
regmap_update_bits(sai->regmap, reg,
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
FSL_SAI_CR2_BYP);
else
regmap_update_bits(sai->regmap, reg,
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
savediv / 2 - 1);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment