Commit a5350a96 authored by Paul Mundt's avatar Paul Mundt

sh: Kill off dead HS771RVoIP board support.

Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 427c727f
......@@ -440,13 +440,6 @@ config SH_SECUREEDGE5410
This includes both the OEM SecureEdge products as well as the
SME product line.
config SH_HS7751RVOIP
bool "HS7751RVOIP"
depends on CPU_SUBTYPE_SH7751R
help
Select HS7751RVOIP if configuring for a Renesas Technology
Sales VoIP board.
config SH_7710VOIPGW
bool "SH7710-VOIP-GW"
depends on CPU_SUBTYPE_SH7710
......
......@@ -112,7 +112,6 @@ machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
......
if SH_HS7751RVOIP
menu "HS7751RVoIP options"
config HS7751RVOIP_CODEC
bool "Support VoIP Codec section"
help
Selecting this option will support CODEC section.
endmenu
endif
#
# Makefile for the HS7751RVoIP specific parts of the kernel
#
obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
/*
* linux/arch/sh/boards/renesas/hs7751rvoip/io.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
* I/O routine for Renesas Technology sales HS7751RVoIP
*
* Initial version only to support LAN access; some
* placeholder code from io_hs7751rvoip.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/hs7751rvoip.h>
#include <asm/addrspace.h>
extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
/*
* The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
* of the 7751R processor, and has a SuperIO accessible via the PCI.
* The board also includes a PCMCIA controller on its memory bus,
* like the other Solution Engine boards.
*/
#define CODEC_IO_BASE 0x1000
#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
if (port == 0x3f6)
return ((unsigned long)area5_io16_base + 0x0c);
else
return ((unsigned long)area5_io16_base + 0x800 +
((port-0x1f0) << 1));
else
maybebadio((unsigned long)port);
return port;
}
/* The 7751R HS7751RVoIP seems to have everything hooked */
/* up pretty normally (nothing on high-bytes only...) so this */
/* shouldn't be needed */
static inline int shifted_port(unsigned long port)
{
/* For IDE registers, value is not shifted */
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
return 0;
else
return 1;
}
#if defined(CONFIG_HS7751RVOIP_CODEC)
#define codec_port(port) \
((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
#else
#define codec_port(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
* is mapped through the PCI IO window. Stuff with high bits (PXSEG)
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
unsigned char hs7751rvoip_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
else if (codec_port(port))
return ctrl_inb(CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inb(pci_ioaddr(port));
else
return ctrl_inw(port2adr(port)) & 0xff;
}
unsigned char hs7751rvoip_inb_p(unsigned long port)
{
unsigned char v;
if (PXSEG(port))
v = ctrl_inb(port);
else if (codec_port(port))
v = ctrl_inb(CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
ctrl_delay();
return v;
}
unsigned short hs7751rvoip_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inw(pci_ioaddr(port));
else
maybebadio(port);
return 0;
}
unsigned int hs7751rvoip_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inl(pci_ioaddr(port));
else
maybebadio(port);
return 0;
}
void hs7751rvoip_outb(unsigned char value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (codec_port(port))
ctrl_outb(value, CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outb(value, port2adr(port));
}
void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (codec_port(port))
ctrl_outb(value, CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
ctrl_delay();
}
void hs7751rvoip_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outw(value, pci_ioaddr(port));
else
maybebadio(port);
}
void hs7751rvoip_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
{
u8 *buf = addr;
if (PXSEG(port))
while (count--)
*buf++ = ctrl_inb(port);
else if (codec_port(port))
while (count--)
*buf++ = ctrl_inb(CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*buf++ = *bp;
} else {
volatile u16 *p = (volatile u16 *)port2adr(port);
while (count--)
*buf++ = *p & 0xff;
}
}
void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
{
volatile u16 *p;
u16 *buf = addr;
if (PXSEG(port))
p = (volatile u16 *)port;
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
while (count--)
*buf++ = *p;
}
void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
{
if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
u32 *buf = addr;
while (count--)
*buf++ = *p;
} else
maybebadio(port);
}
void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
{
const u8 *buf = addr;
if (PXSEG(port))
while (count--)
ctrl_outb(*buf++, port);
else if (codec_port(port))
while (count--)
ctrl_outb(*buf++, CODEC_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*bp = *buf++;
} else {
volatile u16 *p = (volatile u16 *)port2adr(port);
while (count--)
*p = *buf++;
}
}
void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
{
volatile u16 *p;
const u16 *buf = addr;
if (PXSEG(port))
p = (volatile u16 *)port;
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
while (count--)
*p = *buf++;
}
void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
{
const u32 *buf = addr;
if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*p = *buf++;
} else
maybebadio(port);
}
void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
{
if (PXSEG(port))
return (void __iomem *)port;
else if (unlikely(codec_port(port) && (size == 1)))
return (void __iomem *)CODEC_IOMAP(port);
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
/*
* linux/arch/sh/boards/renesas/hs7751rvoip/irq.c
*
* Copyright (C) 2000 Kazumoto Kojima
*
* Renesas Technology Sales HS7751RVoIP Support.
*
* Modified for HS7751RVoIP by
* Atom Create Engineering Co., Ltd. 2002.
* Lineo uSolutions, Inc. 2003.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hs7751rvoip.h>
static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
static void enable_hs7751rvoip_irq(unsigned int irq);
static void disable_hs7751rvoip_irq(unsigned int irq);
/* shutdown is same as "disable" */
#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq
static void ack_hs7751rvoip_irq(unsigned int irq);
static void end_hs7751rvoip_irq(unsigned int irq);
static unsigned int startup_hs7751rvoip_irq(unsigned int irq)
{
enable_hs7751rvoip_irq(irq);
return 0; /* never anything pending */
}
static void disable_hs7751rvoip_irq(unsigned int irq)
{
unsigned short val;
unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
/* Set the priority in IPR to 0 */
val = ctrl_inw(IRLCNTR3);
val &= mask;
ctrl_outw(val, IRLCNTR3);
}
static void enable_hs7751rvoip_irq(unsigned int irq)
{
unsigned short val;
unsigned short value = (0x0001 << mask_pos[irq]);
/* Set priority in IPR back to original value */
val = ctrl_inw(IRLCNTR3);
val |= value;
ctrl_outw(val, IRLCNTR3);
}
static void ack_hs7751rvoip_irq(unsigned int irq)
{
disable_hs7751rvoip_irq(irq);
}
static void end_hs7751rvoip_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_hs7751rvoip_irq(irq);
}
static struct hw_interrupt_type hs7751rvoip_irq_type = {
.typename = "HS7751RVoIP IRQ",
.startup = startup_hs7751rvoip_irq,
.shutdown = shutdown_hs7751rvoip_irq,
.enable = enable_hs7751rvoip_irq,
.disable = disable_hs7751rvoip_irq,
.ack = ack_hs7751rvoip_irq,
.end = end_hs7751rvoip_irq,
};
static void make_hs7751rvoip_irq(unsigned int irq)
{
disable_irq_nosync(irq);
irq_desc[irq].chip = &hs7751rvoip_irq_type;
disable_hs7751rvoip_irq(irq);
}
/*
* Initialize IRQ setting
*/
void __init init_hs7751rvoip_IRQ(void)
{
int i;
/* IRL0=ON HOOK1
* IRL1=OFF HOOK1
* IRL2=ON HOOK2
* IRL3=OFF HOOK2
* IRL4=Ringing Detection
* IRL5=CODEC
* IRL6=Ethernet
* IRL7=Ethernet Hub
* IRL8=USB Communication
* IRL9=USB Connection
* IRL10=USB DMA
* IRL11=CF Card
* IRL12=PCMCIA
* IRL13=PCI Slot
*/
ctrl_outw(0x9876, IRLCNTR1);
ctrl_outw(0xdcba, IRLCNTR2);
ctrl_outw(0x0050, IRLCNTR4);
ctrl_outw(0x4321, IRLCNTR5);
for (i=0; i<14; i++)
make_hs7751rvoip_irq(i);
}
/*
* linux/arch/sh/boards/renesas/hs7751rvoip/pci.c
*
* Author: Ian DaSilva (idasilva@mvista.com)
*
* Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* PCI initialization for the Renesas SH7751R HS7751RVoIP board
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
#include "../../../drivers/pci/pci-sh7751.h"
#include <asm/hs7751rvoip/hs7751rvoip.h>
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
/*
* Only long word accesses of the PCIC's internal local registers and the
* configuration registers from the CPU is supported.
*/
#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
#define PCIC_READ(x) readl(PCI_REG(x))
/*
* Description: This function sets up and initializes the pcic, sets
* up the BARS, maps the DRAM into the address space etc, etc.
*/
int __init pcibios_init_platform(void)
{
unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
unsigned short bcr2, bcr3;
/*
* Initialize the slave bus controller on the pcic. The values used
* here should not be hardcoded, but they should be taken from the bsc
* on the processor, to make this function as generic as possible.
* (i.e. Another sbc may usr different SDRAM timing settings -- in order
* for the pcic to work, its settings need to be exactly the same.)
*/
bcr1 = (*(volatile unsigned long *)(SH7751_BCR1));
bcr2 = (*(volatile unsigned short *)(SH7751_BCR2));
bcr3 = (*(volatile unsigned short *)(SH7751_BCR3));
wcr1 = (*(volatile unsigned long *)(SH7751_WCR1));
wcr2 = (*(volatile unsigned long *)(SH7751_WCR2));
wcr3 = (*(volatile unsigned long *)(SH7751_WCR3));
mcr = (*(volatile unsigned long *)(SH7751_MCR));
bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
(*(volatile unsigned long *)(SH7751_BCR1)) = bcr1;
bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */
PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
/* Enable all interrupts, so we know what to fix */
PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
/* Set up standard PCI config registers */
PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */
PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
/* Now turn it on... */
PCIC_WRITE(SH7751_PCICR, 0xa5000001);
/*
* Set PCIMBR and PCIIOBR here, assuming a single window
* (16M MEM, 256K IO) is enough. If a larger space is
* needed, the readx/writex and inx/outx functions will
* have to do more (e.g. setting registers for each call).
*/
/*
* Set the MBR so PCI address is one-to-one with window,
* meaning all calls go straight through... use ifdef to
* catch erroneous assumption.
*/
BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
/* Set IOBR for window containing area specified in pci.h */
PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
/* All done, may as well say so... */
printk("SH7751R PCI: Finished initialization of the PCI controller\n");
return 1;
}
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
{
switch (slot) {
case 0: return IRQ_PCISLOT; /* PCI Extend slot */
case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */
case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */
default:
printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
return -1;
}
}
static struct resource sh7751_io_resource = {
.name = "SH7751_IO",
.start = 0x4000,
.end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7751_mem_resource = {
.name = "SH7751_mem",
.start = SH7751_PCI_MEMORY_BASE,
.end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
EXPORT_SYMBOL(board_pci_channels);
/*
* Renesas Technology Sales HS7751RVoIP Support.
*
* Copyright (C) 2000 Kazumoto Kojima
*
* Modified for HS7751RVoIP by
* Atom Create Engineering Co., Ltd. 2002.
* Lineo uSolutions, Inc. 2003.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <asm/hs7751rvoip.h>
#include <asm/io.h>
#include <asm/machvec.h>
static void hs7751rvoip_power_off(void)
{
ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
}
void *area5_io8_base;
void *area6_io8_base;
void *area5_io16_base;
void *area6_io16_base;
static int __init hs7751rvoip_cf_init(void)
{
pgprot_t prot;
unsigned long paddrbase;
/* open I/O area window */
paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area5_io16_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
}
/* XXX : do we need attribute and common-memory area also? */
paddrbase = virt_to_phys((void *)PA_AREA6_IO);
#if defined(CONFIG_HS7751RVOIP_CODEC)
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
#else
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
#endif
area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area6_io8_base) {
printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
return -ENOMEM;
}
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area6_io16_base) {
printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
return -ENOMEM;
}
return 0;
}
device_initcall(hs7751rvoip_cf_init);
/*
* Initialize the board
*/
static void __init hs7751rvoip_setup(char **cmdline_p)
{
ctrl_outb(0xf0, PA_OUTPORTR);
pm_power_off = hs7751rvoip_power_off;
printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
}
static struct sh_machine_vector mv_hs7751rvoip __initmv = {
.mv_name = "HS7751RVoIP",
.mv_setup = hs7751rvoip_setup,
.mv_nr_irqs = 72,
.mv_inb = hs7751rvoip_inb,
.mv_inw = hs7751rvoip_inw,
.mv_inl = hs7751rvoip_inl,
.mv_outb = hs7751rvoip_outb,
.mv_outw = hs7751rvoip_outw,
.mv_outl = hs7751rvoip_outl,
.mv_inb_p = hs7751rvoip_inb_p,
.mv_inw_p = hs7751rvoip_inw,
.mv_inl_p = hs7751rvoip_inl,
.mv_outb_p = hs7751rvoip_outb_p,
.mv_outw_p = hs7751rvoip_outw,
.mv_outl_p = hs7751rvoip_outl,
.mv_insb = hs7751rvoip_insb,
.mv_insw = hs7751rvoip_insw,
.mv_insl = hs7751rvoip_insl,
.mv_outsb = hs7751rvoip_outsb,
.mv_outsw = hs7751rvoip_outsw,
.mv_outsl = hs7751rvoip_outsl,
.mv_init_irq = init_hs7751rvoip_IRQ,
.mv_ioport_map = hs7751rvoip_ioport_map,
};
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Tue Oct 3 13:04:52 2006
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System type
#
# CONFIG_SH_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_HP6XX is not set
# CONFIG_SH_EC3104 is not set
# CONFIG_SH_SATURN is not set
# CONFIG_SH_DREAMCAST is not set
# CONFIG_SH_BIGSUR is not set
# CONFIG_SH_MPC1211 is not set
# CONFIG_SH_SH03 is not set
# CONFIG_SH_SECUREEDGE5410 is not set
CONFIG_SH_HS7751RVOIP=y
# CONFIG_SH_7710VOIPGW is not set
# CONFIG_SH_RTS7751R2D is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set
# CONFIG_SH_UNKNOWN is not set
#
# Processor selection
#
CONFIG_CPU_SH4=y
#
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
#
# SH-3 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
#
# SH-4 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
#
# ST40 Processor Support
#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
#
# SH-4A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# SH4AL-DSP Processor Support
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
#
# Memory management options
#
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
#
# Timer support
#
CONFIG_SH_TMU=y
#
# HS7751RVoIP options
#
CONFIG_HS7751RVOIP_CODEC=y
CONFIG_SH_PCLK_FREQ=60000000
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# DMA support
#
# CONFIG_SH_DMA is not set
#
# Companion Chips
#
# CONFIG_HD6446X_SERIES is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=64M console=ttySC1,115200 root=/dev/hda1"
#
# Bus options
#
# CONFIG_PCI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options (EXPERIMENTAL)
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=1
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
......@@ -516,10 +516,8 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
PCI_LATENCY_TIMER, 0x80);
#endif
/* Allocate PCI I/O and/or memory space */
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
......
......@@ -29,7 +29,6 @@ HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
HS7751RVOIP SH_HS7751RVOIP
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
......
#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
#define __ASM_SH_RENESAS_HS7751RVOIP_H
/*
* linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Technology Sales HS7751RVoIP support
*/
/* Box specific addresses. */
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_SLICCNTR1 0xa4000006 /* SLIC PIO Control 1 */
#define PA_SLICCNTR2 0xa4000008 /* SLIC PIO Control 2 */
#define PA_DMACNTR 0xa400000a /* USB DMA Control */
#define PA_INPORTR 0xa400000c /* Input Port Register */
#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */
#define PA_VERREG 0xa4000014 /* FPGA Version Register */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRLCNTR2 (PA_BCR + 2) /* Interrupt Control Register2 */
#define IRLCNTR3 (PA_BCR + 4) /* Interrupt Control Register3 */
#define IRLCNTR4 (PA_BCR + 16) /* Interrupt Control Register4 */
#define IRLCNTR5 (PA_BCR + 18) /* Interrupt Control Register5 */
#define IRQ_PCIETH 6 /* PCI Ethernet IRQ */
#define IRQ_PCIHUB 7 /* PCI Ethernet Hub IRQ */
#define IRQ_USBCOM 8 /* USB Comunication IRQ */
#define IRQ_USBCON 9 /* USB Connect IRQ */
#define IRQ_USBDMA 10 /* USB DMA IRQ */
#define IRQ_CFCARD 11 /* CF Card IRQ */
#define IRQ_PCMCIA 12 /* PCMCIA IRQ */
#define IRQ_PCISLOT 13 /* PCI Slot #1 IRQ */
#define IRQ_ONHOOK1 0 /* ON HOOK1 IRQ */
#define IRQ_OFFHOOK1 1 /* OFF HOOK1 IRQ */
#define IRQ_ONHOOK2 2 /* ON HOOK2 IRQ */
#define IRQ_OFFHOOK2 3 /* OFF HOOK2 IRQ */
#define IRQ_RINGING 4 /* Ringing IRQ */
#define IRQ_CODEC 5 /* CODEC IRQ */
#define __IO_PREFIX hs7751rvoip
#include <asm/io_generic.h>
/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
void init_hs7751rvoip_IRQ(void);
/* arch/sh/boards/renesas/hs7751rvoip/io.c */
void *hs7751rvoip_ioremap(unsigned long, unsigned long);
#endif /* __ASM_SH_RENESAS_HS7751RVOIP */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment