Merge branch 'topic/firewire' into for-next

This is a merge of big firewire audio stack updates by Takashi Sakamoto.

Documentation/ABI/testing/sysfs-bus-pci

@@ -117,7 +117,7 @@ Description:
 
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
-Contact:	Ben Hutchings <bhutchings@solarflare.com>
+Contact:	Ben Hutchings <bwh@kernel.org>
 Description:
 		A file named vpd in a device directory will be a
 		binary file containing the Vital Product Data for the

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -62,7 +62,7 @@ Required properties for PMC node:
 - interrupt-controller : tell that the PMC is an interrupt controller.
 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
 	and reflect the bit position in the PMC_ER/DR/SR registers.
-	You can use the dt macros defined in dt-bindings/clk/at91.h.
+	You can use the dt macros defined in dt-bindings/clock/at91.h.
 	0 (AT91_PMC_MOSCS) -> main oscillator ready
 	1 (AT91_PMC_LOCKA) -> PLL A ready
 	2 (AT91_PMC_LOCKB) -> PLL B ready

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -43,7 +43,7 @@ Example
 		clock-output-names =
 			"tpu0", "mmcif1", "sdhi3", "sdhi2",
 			 "sdhi1", "sdhi0", "mmcif0";
-		renesas,clock-indices = <
+		clock-indices = <
 			R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
 			R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
 			R8A7790_CLK_MMCIF0

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -29,6 +29,6 @@ edma: edma@49000000 {
 	dma-channels = <64>;
 	ti,edma-regions = <4>;
 	ti,edma-slots = <256>;
-	ti,edma-xbar-event-map = <1 12
-				  2 13>;
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+					    2 13>;
 };

Documentation/kernel-parameters.txt

@@ -2218,10 +2218,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
 			with UP alternatives
 
-	nordrand	[X86] Disable the direct use of the RDRAND
-			instruction even if it is supported by the
-			processor.  RDRAND is still available to user
-			space applications.
+	nordrand	[X86] Disable kernel use of the RDRAND and
+			RDSEED instructions even if they are supported
+			by the processor.  RDRAND and RDSEED are still
+			available to user space applications.
 
 	noresume	[SWSUSP] Disables resume and restores original swap
 			space.

MAINTAINERS

@@ -1893,14 +1893,15 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
-BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
+BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
 M:	Matt Porter <mporter@linaro.org>
 L:	bcm-kernel-feedback-list@broadcom.com
-T:	git git://git.github.com/broadcom/bcm11351
+T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
 F:	arch/arm/mach-bcm/
 F:	arch/arm/boot/dts/bcm113*
+F:	arch/arm/boot/dts/bcm216*
 F:	arch/arm/boot/dts/bcm281*
 F:	arch/arm/configs/bcm_defconfig
 F:	drivers/mmc/host/sdhci_bcm_kona.c
@@ -4812,6 +4813,14 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+
+IRQCHIP DRIVERS
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Jason Cooper <jason@lakedaemon.net>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
+T:	git git://git.infradead.org/users/jcooper/linux.git irqchip/core
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
@@ -5484,15 +5493,15 @@ F:	Documentation/hwmon/ltc4261
 F:	drivers/hwmon/ltc4261.c
 
 LTP (Linux Test Project)
-M:	Shubham Goyal <shubham@linux.vnet.ibm.com>
 M:	Mike Frysinger <vapier@gentoo.org>
 M:	Cyril Hrubis <chrubis@suse.cz>
-M:	Caspar Zhang <caspar@casparzhang.com>
 M:	Wanlong Gao <gaowanlong@cn.fujitsu.com>
+M:	Jan Stancek <jstancek@redhat.com>
+M:	Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+M:	Alexey Kodanev <alexey.kodanev@oracle.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
-W:	http://ltp.sourceforge.net/
+W:	http://linux-test-project.github.io/
 T:	git git://github.com/linux-test-project/ltp.git
-T:	git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
 S:	Maintained
 
 M32R ARCHITECTURE
@@ -9102,6 +9111,9 @@ F:	arch/um/os-Linux/drivers/
 
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
+M:	Ralf Baechle <ralf@linux-mips.org>
+L:	linux-mips@linux-mips.org
+Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
 F:	drivers/tc/
 F:	include/linux/tc.h

Makefile

 VERSION = 3
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am33xx.dtsi

@@ -144,7 +144,7 @@ edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
 			dma-channels = <64>;

arch/arm/boot/dts/am3517.dtsi

@@ -62,5 +62,21 @@ uart4: serial@4809e000 {
 	};
 };
 
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+	status = "disabled";
+};
+
 /include/ "am35xx-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -117,6 +117,11 @@ &gpio4 {
 	status = "okay";
 };
 
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmcsd_fixed>;

arch/arm/boot/dts/armada-370-db.dts

@@ -67,6 +67,7 @@ ethernet@74000 {
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
+				clock-frequency = <100000>;
 				status = "okay";
 				audio_codec: audio-codec@4a {
 					compatible = "cirrus,cs42l51";

arch/arm/boot/dts/armada-375-db.dts

@@ -79,6 +79,11 @@ sdio_st_pins: sdio-st-pins {
 				};
 			};
 
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
 			nand: nand@d0000 {
 				pinctrl-0 = <&nand_pins>;
 				pinctrl-names = "default";

arch/arm/boot/dts/armada-xp-db.dts

@@ -49,7 +49,7 @@ devbus-bootcs {
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/armada-xp-gp.dts

@@ -59,7 +59,7 @@ devbus-bootcs {
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;
@@ -146,22 +146,22 @@ phy3: ethernet-phy@3 {
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
-				phy-mode = "rgmii-id";
+				phy-mode = "qsgmii";
 			};
 
 			/* Front-side USB slot */

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -39,7 +39,7 @@ devbus-bootcs {
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -34,7 +34,7 @@ slot@0 {
 			};
 
 			spi0: spi@f0004000 {
-				cs-gpios = <&pioD 13 0>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
 
@@ -79,7 +79,7 @@ slot@0 {
 			};
 
 			spi1: spi@f8008000 {
-				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -10,7 +10,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9261 family SoC";

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -8,7 +8,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 

arch/arm/boot/dts/imx53-mba53.dts

@@ -244,7 +244,7 @@ &i2c3 {
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	i2c-ddc-bus = <&i2c3>;
+	ddc-i2c-bus = <&i2c3>;
 	fsl,tve-mode = "vga";
 	fsl,hsync-pin = <4>;
 	fsl,vsync-pin = <6>;

arch/arm/boot/dts/imx53.dtsi

@@ -115,7 +115,7 @@ ipu: ipu@18000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x080000000>;
+			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
 			         <&clks IMX5_CLK_IPU_DI0_GATE>,

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -30,6 +30,16 @@ chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+        };
+
 	ocp@f1000000 {
 		pinctrl@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -73,14 +83,6 @@ serial@12000 {
 		ehci@50000 {
 			status = "okay";
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-nsa310-common.dtsi

@@ -4,6 +4,16 @@
 / {
 	model = "ZyXEL NSA310";
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
@@ -26,14 +36,6 @@ sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_poweroff {

arch/arm/boot/dts/kirkwood-t5325.dts

@@ -127,11 +127,6 @@ partition@4 {
 
 		i2c@11000 {
 			status = "okay";
-
-			alc5621: alc5621@1a {
-				compatible = "realtek,alc5621";
-				reg = <0x1a>;
-			};
 		};
 
 		serial@12000 {

arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi

@@ -24,11 +24,10 @@ ethernet@gpmc {
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		bank-width = <2>;
 		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
+		gpmc,cs-on-ns = <1>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-rd-off-ns = <18>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
@@ -36,12 +35,10 @@ ethernet@gpmc {
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
 		vddvario-supply = <&vddvario>;

arch/arm/boot/dts/omap2.dtsi

@@ -71,13 +71,6 @@ hdq1w: 1w@480b2000 {
 			interrupts = <58>;
 		};
 
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			ti,hwmods = "mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-		};
-
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;

arch/arm/boot/dts/omap2420.dtsi

@@ -125,6 +125,14 @@ msdi1: mmc@4809c000 {
 			dma-names = "tx", "rx";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>, <34>;
+			interrupt-names = "dsp", "iva";
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;

arch/arm/boot/dts/omap2430.dtsi

@@ -216,6 +216,13 @@ mmc2: mmc@480b4000 {
 			dma-names = "tx", "rx";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;

arch/arm/boot/dts/omap3-cm-t3x30.dtsi

@@ -10,18 +10,6 @@ cpu@0 {
 			cpu0-supply = <&vcc>;
 		};
 	};
-
-	vddvario: regulator-vddvario {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
 };
 
 &omap3_pmx_core {
@@ -35,58 +23,34 @@ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_1
 
  	hsusb0_pins: pinmux_hsusb0_pins {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
 };
 
+#include "omap-gpmc-smsc911x.dtsi"
+
 &gpmc {
 	ranges = <5 0 0x2c000000 0x01000000>;
 
-	smsc1: ethernet@5,0 {
+	smsc1: ethernet@gpmc {
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		pinctrl-names = "default";
 		pinctrl-0 = <&smsc1_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
 	};
 };
 

arch/arm/boot/dts/omap3-igep.dtsi

@@ -107,7 +107,7 @@ mmc2_pins: pinmux_mmc2_pins {
 		>;
 	};
 
-	smsc911x_pins: pinmux_smsc911x_pins {
+	smsc9221_pins: pinmux_smsc9221_pins {
 		pinctrl-single,pins = <
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;

arch/arm/boot/dts/omap3-igep0020.dts

@@ -10,7 +10,7 @@
  */
 
 #include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
@@ -248,7 +248,7 @@ partition@780000 {
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
-		pinctrl-0 = <&smsc911x_pins>;
+		pinctrl-0 = <&smsc9221_pins>;
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/omap3-sb-t35.dtsi

@@ -2,20 +2,6 @@
  * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
  */
 
-/ {
-	vddvario_sb_t35: regulator-vddvario-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a_sb_t35: regulator-vdd33a-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
 &omap3_pmx_core {
 	smsc2_pins: pinmux_smsc2_pins {
 		pinctrl-single,pins = <
@@ -37,11 +23,10 @@ smsc2: ethernet@4,0 {
 		reg = <4 0 0xff>;
 		bank-width = <2>;
 		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
+		gpmc,cs-on-ns = <1>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-rd-off-ns = <18>;
 		gpmc,adv-wr-off-ns = <48>;
 		gpmc,oe-on-ns = <54>;
 		gpmc,oe-off-ns = <168>;
@@ -49,16 +34,14 @@ smsc2: ethernet@4,0 {
 		gpmc,we-off-ns = <168>;
 		gpmc,rd-cycle-ns = <186>;
 		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario_sb_t35>;
-		vdd33a-supply = <&vdd33a_sb_t35>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
 		reg-io-width = <4>;
 		smsc,save-mac-address;
 	};

arch/arm/boot/dts/omap3-sbc-t3517.dts

@@ -8,6 +8,19 @@
 / {
 	model = "CompuLab SBC-T3517 with CM-T3517";
 	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+	vddvario: regulator-vddvario-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
 };
 
 &omap3_pmx_core {

arch/arm/boot/dts/omap3.dtsi

@@ -61,7 +61,7 @@ mpu {
 			ti,hwmods = "mpu";
 		};
 
-		iva {
+		iva: iva {
 			compatible = "ti,iva2.2";
 			ti,hwmods = "iva";
 

arch/arm/boot/dts/omap5.dtsi

@@ -630,6 +630,13 @@ mcbsp3: mcbsp@40126000 {
 			status = "disabled";
 		};
 
+		mailbox: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+		};
+
 		timer1: timer@4ae18000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x4ae18000 0x80>;

arch/arm/boot/dts/sama5d3.dtsi

@@ -13,7 +13,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel SAMA5D3 family SoC";

arch/arm/boot/dts/sama5d3_mci2.dtsi

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	ahb {

arch/arm/boot/dts/sama5d3_tcb1.dtsi

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	aliases {

arch/arm/boot/dts/sama5d3_uart.dtsi

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	aliases {

arch/arm/boot/dts/ste-ccu8540.dts

@@ -18,6 +18,7 @@ / {
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
 	};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -87,7 +87,7 @@ pll1: clk@01c20000 {
 
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
+			compatible = "allwinner,sun7i-a20-pll4-clk";
 			reg = <0x01c20018 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll4";
@@ -109,6 +109,14 @@ pll6: clk@01c20028 {
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
 		};
 
+		pll8: clk@01c20040 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20040 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll8";
+		};
+
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-cpu-clk";
@@ -805,9 +813,9 @@ i2c3: i2c@01c2b800 {
 			status = "disabled";
 		};
 
-		i2c4: i2c@01c2bc00 {
+		i2c4: i2c@01c2c000 {
 			compatible = "allwinner,sun4i-i2c";
-			reg = <0x01c2bc00 0x400>;
+			reg = <0x01c2c000 0x400>;
 			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;

arch/arm/common/edma.c

@@ -1423,55 +1423,38 @@ EXPORT_SYMBOL(edma_clear_event);
 
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
-static int edma_of_read_u32_to_s16_array(const struct device_node *np,
-					 const char *propname, s16 *out_values,
-					 size_t sz)
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
+			       struct edma_soc_info *pdata, size_t sz)
 {
-	int ret;
-
-	ret = of_property_read_u16_array(np, propname, out_values, sz);
-	if (ret)
-		return ret;
-
-	/* Terminate it */
-	*out_values++ = -1;
-	*out_values++ = -1;
-
-	return 0;
-}
-
-static int edma_xbar_event_map(struct device *dev,
-			       struct device_node *node,
-			       struct edma_soc_info *pdata, int len)
-{
-	int ret, i;
+	const char pname[] = "ti,edma-xbar-event-map";
 	struct resource res;
 	void __iomem *xbar;
-	const s16 (*xbar_chans)[2];
+	s16 (*xbar_chans)[2];
+	size_t nelm = sz / sizeof(s16);
 	u32 shift, offset, mux;
+	int ret, i;
 
-	xbar_chans = devm_kzalloc(dev,
-				  len/sizeof(s16) + 2*sizeof(s16),
-				  GFP_KERNEL);
+	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
 	if (!xbar_chans)
 		return -ENOMEM;
 
 	ret = of_address_to_resource(node, 1, &res);
 	if (ret)
-		return -EIO;
+		return -ENOMEM;
 
 	xbar = devm_ioremap(dev, res.start, resource_size(&res));
 	if (!xbar)
 		return -ENOMEM;
 
-	ret = edma_of_read_u32_to_s16_array(node,
-					    "ti,edma-xbar-event-map",
-					    (s16 *)xbar_chans,
-					    len/sizeof(u32));
+	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
 	if (ret)
 		return -EIO;
 
-	for (i = 0; xbar_chans[i][0] != -1; i++) {
+	/* Invalidate last entry for the other user of this mess */
+	nelm >>= 1;
+	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+	for (i = 0; i < nelm; i++) {
 		shift = (xbar_chans[i][1] & 0x03) << 3;
 		offset = xbar_chans[i][1] & 0xfffffffc;
 		mux = readl(xbar + offset);
@@ -1480,8 +1463,7 @@ static int edma_xbar_event_map(struct device *dev,
 		writel(mux, (xbar + offset));
 	}
 
-	pdata->xbar_chans = xbar_chans;
-
+	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
 	return 0;
 }
 

arch/arm/configs/sunxi_defconfig

@@ -37,7 +37,7 @@ CONFIG_SUN4I_EMAC=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 CONFIG_SERIAL_8250=y

arch/arm/include/asm/xen/page.h

@@ -77,7 +77,6 @@ static inline xpaddr_t machine_to_phys(xmaddr_t machine)
 }
 /* VIRT <-> MACHINE conversion */
 #define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
 #define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
 #define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 

arch/arm/mach-omap2/omap-headsmp.S

 /*
  * Secondary CPU startup routine source file.
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
  *
  * Author:
  *      Santosh Shilimkar <santosh.shilimkar@ti.com>
@@ -28,9 +28,13 @@
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
  * The primary core will update this flag using a hardware
-+ * register AuxCoreBoot0.
+ * register AuxCoreBoot0.
  */
 ENTRY(omap5_secondary_startup)
+.arm
+THUMB( adr     r9, BSYM(wait)  )       @ CPU may be entered in ARM mode.
+THUMB( bx      r9              )       @ If this is a Thumb-2 kernel,
+THUMB( .thumb                  )       @ switch to Thumb now.
 wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	ldr	r0, [r2]
 	mov	r0, r0, lsr #5

arch/arm/mach-orion5x/common.h

@@ -21,7 +21,7 @@ struct mv_sata_platform_data;
 #define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
 #define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
 #define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
-#define ORION_MBUS_SRAM_TARGET        0x00
+#define ORION_MBUS_SRAM_TARGET        0x09
 #define ORION_MBUS_SRAM_ATTR          0x00
 
 /*

arch/arm64/include/asm/memory.h

@@ -138,6 +138,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_to_pfn(x)      __phys_to_pfn(__virt_to_phys(x))
 
 /*
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *

arch/arm64/kernel/irq.c

@@ -97,11 +97,15 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
 		return false;
 
-	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-		affinity = cpu_online_mask;
+	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids)
 		ret = true;
-	}
 
+	/*
+	 * when using forced irq_set_affinity we must ensure that the cpu
+	 * being offlined is not present in the affinity mask, it may be
+	 * selected as the target CPU otherwise
+	 */
+	affinity = cpu_online_mask;
 	c = irq_data_get_irq_chip(d);
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);

arch/arm64/mm/hugetlbpage.c

@@ -51,7 +51,11 @@ int pmd_huge(pmd_t pmd)
 
 int pud_huge(pud_t pud)
 {
+#ifndef __PAGETABLE_PMD_FOLDED
 	return !(pud_val(pud) & PUD_TABLE_BIT);
+#else
+	return 0;
+#endif
 }
 
 int pmd_huge_support(void)

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			314 /* length of syscall table */
+#define NR_syscalls			315 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -327,5 +327,6 @@
 #define __NR_finit_module		1335
 #define __NR_sched_setattr		1336
 #define __NR_sched_getattr		1337
+#define __NR_renameat2			1338
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1775,6 +1775,7 @@ sys_call_table:
 	data8 sys_finit_module			// 1335
 	data8 sys_sched_setattr
 	data8 sys_sched_getattr
+	data8 sys_renameat2
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		351
+#define NR_syscalls		352
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -356,5 +356,6 @@
 #define __NR_finit_module	348
 #define __NR_sched_setattr	349
 #define __NR_sched_getattr	350
+#define __NR_renameat2		351
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -371,4 +371,5 @@ ENTRY(sys_call_table)
 	.long sys_finit_module
 	.long sys_sched_setattr
 	.long sys_sched_getattr		/* 350 */
+	.long sys_renameat2
 

arch/metag/include/asm/barrier.h

@@ -15,6 +15,7 @@ static inline void wr_fence(void)
 	volatile int *flushptr = (volatile int *) LINSYSEVENT_WR_FENCE;
 	barrier();
 	*flushptr = 0;
+	barrier();
 }
 
 #else /* CONFIG_METAG_META21 */
@@ -35,6 +36,7 @@ static inline void wr_fence(void)
 	*flushptr = 0;
 	*flushptr = 0;
 	*flushptr = 0;
+	barrier();
 }
 
 #endif /* !CONFIG_METAG_META21 */
@@ -68,6 +70,7 @@ static inline void fence(void)
 	volatile int *flushptr = (volatile int *) LINSYSEVENT_WR_ATOMIC_UNLOCK;
 	barrier();
 	*flushptr = 0;
+	barrier();
 }
 #define smp_mb()        fence()
 #define smp_rmb()       fence()

arch/metag/include/asm/processor.h

@@ -22,6 +22,8 @@
 /* Add an extra page of padding at the top of the stack for the guard page. */
 #define STACK_TOP	(TASK_SIZE - PAGE_SIZE)
 #define STACK_TOP_MAX	STACK_TOP
+/* Maximum virtual space for stack */
+#define STACK_SIZE_MAX	(CONFIG_MAX_STACK_SIZE_MB*1024*1024)
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.

arch/metag/include/uapi/asm/Kbuild

@@ -4,11 +4,11 @@ include include/uapi/asm-generic/Kbuild.asm
 header-y += byteorder.h
 header-y += ech.h
 header-y += ptrace.h
-header-y += resource.h
 header-y += sigcontext.h
 header-y += siginfo.h
 header-y += swab.h
 header-y += unistd.h
 
 generic-y += mman.h
+generic-y += resource.h
 generic-y += setup.h

arch/metag/include/uapi/asm/resource.h

-#ifndef _UAPI_METAG_RESOURCE_H
-#define _UAPI_METAG_RESOURCE_H
-
-#define _STK_LIM_MAX    (1 << 28)
-#include <asm-generic/resource.h>
-
-#endif /* _UAPI_METAG_RESOURCE_H */

arch/mips/dec/ecc-berr.c

@@ -21,6 +21,7 @@
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/irq_regs.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>

arch/mips/dec/kn02xa-berr.c

@@ -19,6 +19,7 @@
 #include <linux/types.h>
 
 #include <asm/addrspace.h>
+#include <asm/cpu-type.h>
 #include <asm/irq_regs.h>
 #include <asm/ptrace.h>
 #include <asm/traps.h>

arch/mips/dec/prom/Makefile

@@ -6,4 +6,3 @@
 lib-y			+= init.o memory.o cmdline.o identify.o console.o
 
 lib-$(CONFIG_32BIT)	+= locore.o
-lib-$(CONFIG_64BIT)	+= call_o32.o

arch/mips/dec/prom/call_o32.S

-/*
- *	O32 interface for the 64 (or N32) ABI.
- *
- *	Copyright (C) 2002  Maciej W. Rozycki
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-/* Maximum number of arguments supported.  Must be even!  */
-#define O32_ARGC	32
-/* Number of static registers we save.  */
-#define O32_STATC	11
-/* Frame size for both of the above.  */
-#define O32_FRAMESZ	(4 * O32_ARGC + SZREG * O32_STATC)
-
-		.text
-
-/*
- * O32 function call dispatcher, for interfacing 32-bit ROM routines.
- *
- * The standard 64 (N32) calling sequence is supported, with a0
- * holding a function pointer, a1-a7 -- its first seven arguments
- * and the stack -- remaining ones (up to O32_ARGC, including a1-a7).
- * Static registers, gp and fp are preserved, v0 holds a result.
- * This code relies on the called o32 function for sp and ra
- * restoration and thus both this dispatcher and the current stack
- * have to be placed in a KSEGx (or KUSEG) address space.  Any
- * pointers passed have to point to addresses within one of these
- * spaces as well.
- */
-NESTED(call_o32, O32_FRAMESZ, ra)
-		REG_SUBU	sp,O32_FRAMESZ
-
-		REG_S		ra,O32_FRAMESZ-1*SZREG(sp)
-		REG_S		fp,O32_FRAMESZ-2*SZREG(sp)
-		REG_S		gp,O32_FRAMESZ-3*SZREG(sp)
-		REG_S		s7,O32_FRAMESZ-4*SZREG(sp)
-		REG_S		s6,O32_FRAMESZ-5*SZREG(sp)
-		REG_S		s5,O32_FRAMESZ-6*SZREG(sp)
-		REG_S		s4,O32_FRAMESZ-7*SZREG(sp)
-		REG_S		s3,O32_FRAMESZ-8*SZREG(sp)
-		REG_S		s2,O32_FRAMESZ-9*SZREG(sp)
-		REG_S		s1,O32_FRAMESZ-10*SZREG(sp)
-		REG_S		s0,O32_FRAMESZ-11*SZREG(sp)
-
-		move		jp,a0
-
-		sll		a0,a1,zero
-		sll		a1,a2,zero
-		sll		a2,a3,zero
-		sll		a3,a4,zero
-		sw		a5,0x10(sp)
-		sw		a6,0x14(sp)
-		sw		a7,0x18(sp)
-
-		PTR_LA		t0,O32_FRAMESZ(sp)
-		PTR_LA		t1,0x1c(sp)
-		li		t2,O32_ARGC-7
-1:
-		lw		t3,(t0)
-		REG_ADDU	t0,SZREG
-		sw		t3,(t1)
-		REG_SUBU	t2,1
-		REG_ADDU	t1,4
-		bnez		t2,1b
-
-		jalr		jp
-
-		REG_L		s0,O32_FRAMESZ-11*SZREG(sp)
-		REG_L		s1,O32_FRAMESZ-10*SZREG(sp)
-		REG_L		s2,O32_FRAMESZ-9*SZREG(sp)
-		REG_L		s3,O32_FRAMESZ-8*SZREG(sp)
-		REG_L		s4,O32_FRAMESZ-7*SZREG(sp)
-		REG_L		s5,O32_FRAMESZ-6*SZREG(sp)
-		REG_L		s6,O32_FRAMESZ-5*SZREG(sp)
-		REG_L		s7,O32_FRAMESZ-4*SZREG(sp)
-		REG_L		gp,O32_FRAMESZ-3*SZREG(sp)
-		REG_L		fp,O32_FRAMESZ-2*SZREG(sp)
-		REG_L		ra,O32_FRAMESZ-1*SZREG(sp)
-
-		REG_ADDU	sp,O32_FRAMESZ
-		jr		ra
-END(call_o32)

arch/mips/fw/lib/call_o32.S

 /*
  *	O32 interface for the 64 (or N32) ABI.
  *
- *	Copyright (C) 2002  Maciej W. Rozycki
+ *	Copyright (C) 2002, 2014  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -12,28 +12,37 @@
 #include <asm/asm.h>
 #include <asm/regdef.h>
 
+/* O32 register size.  */
+#define O32_SZREG	4
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.	*/
+/* Number of static registers we save.  */
 #define O32_STATC	11
-/* Frame size for static register  */
-#define O32_FRAMESZ	(SZREG * O32_STATC)
-/* Frame size on new stack */
-#define O32_FRAMESZ_NEW (SZREG + 4 * O32_ARGC)
+/* Argument area frame size.  */
+#define O32_ARGSZ	(O32_SZREG * O32_ARGC)
+/* Static register save area frame size.  */
+#define O32_STATSZ	(SZREG * O32_STATC)
+/* Stack pointer register save area frame size.  */
+#define O32_SPSZ	SZREG
+/* Combined area frame size.  */
+#define O32_FRAMESZ	(O32_ARGSZ + O32_SPSZ + O32_STATSZ)
+/* Switched stack frame size.  */
+#define O32_NFRAMESZ	(O32_ARGSZ + O32_SPSZ)
 
 		.text
 
 /*
  * O32 function call dispatcher, for interfacing 32-bit ROM routines.
  *
- * The standard 64 (N32) calling sequence is supported, with a0
- * holding a function pointer, a1 a new stack pointer, a2-a7 -- its
- * first six arguments and the stack -- remaining ones (up to O32_ARGC,
- * including a2-a7). Static registers, gp and fp are preserved, v0 holds
- * a result. This code relies on the called o32 function for sp and ra
- * restoration and this dispatcher has to be placed in a KSEGx (or KUSEG)
- * address space.  Any pointers passed have to point to addresses within
- * one of these spaces as well.
+ * The standard 64 (N32) calling sequence is supported, with a0 holding
+ * a function pointer, a1 a pointer to the new stack to call the
+ * function with or 0 if no stack switching is requested, a2-a7 -- the
+ * function call's first six arguments, and the stack -- the remaining
+ * arguments (up to O32_ARGC, including a2-a7).  Static registers, gp
+ * and fp are preserved, v0 holds the result.  This code relies on the
+ * called o32 function for sp and ra restoration and this dispatcher has
+ * to be placed in a KSEGx (or KUSEG) address space.  Any pointers
+ * passed have to point to addresses within one of these spaces as well.
  */
 NESTED(call_o32, O32_FRAMESZ, ra)
 		REG_SUBU	sp,O32_FRAMESZ
@@ -51,32 +60,36 @@ NESTED(call_o32, O32_FRAMESZ, ra)
 		REG_S		s0,O32_FRAMESZ-11*SZREG(sp)
 
 		move		jp,a0
-		REG_SUBU	s0,a1,O32_FRAMESZ_NEW
-		REG_S		sp,O32_FRAMESZ_NEW-1*SZREG(s0)
+
+		move		fp,sp
+		beqz		a1,0f
+		REG_SUBU	fp,a1,O32_NFRAMESZ
+0:
+		REG_S		sp,O32_NFRAMESZ-1*SZREG(fp)
 
 		sll		a0,a2,zero
 		sll		a1,a3,zero
 		sll		a2,a4,zero
 		sll		a3,a5,zero
-		sw		a6,0x10(s0)
-		sw		a7,0x14(s0)
+		sw		a6,4*O32_SZREG(fp)
+		sw		a7,5*O32_SZREG(fp)
 
 		PTR_LA		t0,O32_FRAMESZ(sp)
-		PTR_LA		t1,0x18(s0)
+		PTR_LA		t1,6*O32_SZREG(fp)
 		li		t2,O32_ARGC-6
 1:
 		lw		t3,(t0)
 		REG_ADDU	t0,SZREG
 		sw		t3,(t1)
 		REG_SUBU	t2,1
-		REG_ADDU	t1,4
+		REG_ADDU	t1,O32_SZREG
 		bnez		t2,1b
 
-		move		sp,s0
+		move		sp,fp
 
 		jalr		jp
 
-		REG_L		sp,O32_FRAMESZ_NEW-1*SZREG(sp)
+		REG_L		sp,O32_NFRAMESZ-1*SZREG(sp)
 
 		REG_L		s0,O32_FRAMESZ-11*SZREG(sp)
 		REG_L		s1,O32_FRAMESZ-10*SZREG(sp)

arch/mips/fw/sni/sniprom.c

@@ -40,7 +40,8 @@
 
 #ifdef CONFIG_64BIT
 
-static u8 o32_stk[16384];
+/* O32 stack has to be 8-byte aligned. */
+static u64 o32_stk[4096];
 #define O32_STK	  &o32_stk[sizeof(o32_stk)]
 
 #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \

arch/mips/include/asm/dec/prom.h

@@ -113,31 +113,31 @@ extern int (*__pmax_close)(int);
 #define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
 				 __asm__(#fun " = call_o32")
 
-int __DEC_PROM_O32(_rex_bootinit, (int (*)(void)));
-int __DEC_PROM_O32(_rex_bootread, (int (*)(void)));
-int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *));
+int __DEC_PROM_O32(_rex_bootinit, (int (*)(void), void *));
+int __DEC_PROM_O32(_rex_bootread, (int (*)(void), void *));
+int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), void *, memmap *));
 unsigned long *__DEC_PROM_O32(_rex_slot_address,
-			     (unsigned long *(*)(int), int));
-void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void)));
-int __DEC_PROM_O32(_rex_getsysid, (int (*)(void)));
-void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void)));
-
-int __DEC_PROM_O32(_prom_getchar, (int (*)(void)));
-char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *));
-int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...));
-
-
-#define rex_bootinit()		_rex_bootinit(__rex_bootinit)
-#define rex_bootread()		_rex_bootread(__rex_bootread)
-#define rex_getbitmap(x)	_rex_getbitmap(__rex_getbitmap, x)
-#define rex_slot_address(x)	_rex_slot_address(__rex_slot_address, x)
-#define rex_gettcinfo()		_rex_gettcinfo(__rex_gettcinfo)
-#define rex_getsysid()		_rex_getsysid(__rex_getsysid)
-#define rex_clear_cache()	_rex_clear_cache(__rex_clear_cache)
-
-#define prom_getchar()		_prom_getchar(__prom_getchar)
-#define prom_getenv(x)		_prom_getenv(__prom_getenv, x)
-#define prom_printf(x...)	_prom_printf(__prom_printf, x)
+			     (unsigned long *(*)(int), void *, int));
+void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void), void *));
+int __DEC_PROM_O32(_rex_getsysid, (int (*)(void), void *));
+void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void), void *));
+
+int __DEC_PROM_O32(_prom_getchar, (int (*)(void), void *));
+char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), void *, char *));
+int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), void *, char *, ...));
+
+
+#define rex_bootinit()		_rex_bootinit(__rex_bootinit, NULL)
+#define rex_bootread()		_rex_bootread(__rex_bootread, NULL)
+#define rex_getbitmap(x)	_rex_getbitmap(__rex_getbitmap, NULL, x)
+#define rex_slot_address(x)	_rex_slot_address(__rex_slot_address, NULL, x)
+#define rex_gettcinfo()		_rex_gettcinfo(__rex_gettcinfo, NULL)
+#define rex_getsysid()		_rex_getsysid(__rex_getsysid, NULL)
+#define rex_clear_cache()	_rex_clear_cache(__rex_clear_cache, NULL)
+
+#define prom_getchar()		_prom_getchar(__prom_getchar, NULL)
+#define prom_getenv(x)		_prom_getenv(__prom_getenv, NULL, x)
+#define prom_printf(x...)	_prom_printf(__prom_printf, NULL, x)
 
 #else /* !CONFIG_64BIT */
 

arch/mips/include/asm/rm9k-ocd.h

-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_ASM_RM9K_OCD_H)
-#define _ASM_RM9K_OCD_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-extern volatile void __iomem * const ocd_base;
-extern volatile void __iomem * const titan_base;
-
-#define ocd_addr(__x__)		(ocd_base + (__x__))
-#define titan_addr(__x__)	(titan_base + (__x__))
-#define scram_addr(__x__)	(scram_base + (__x__))
-
-/* OCD register access */
-#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__))
-#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__))
-#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__))
-#define ocd_writel(__val__, __offs__) \
-	__raw_writel((__val__), ocd_addr(__offs__))
-#define ocd_writew(__val__, __offs__) \
-	__raw_writew((__val__), ocd_addr(__offs__))
-#define ocd_writeb(__val__, __offs__) \
-	__raw_writeb((__val__), ocd_addr(__offs__))
-
-/* TITAN register access - 32 bit-wide only */
-#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__))
-#define titan_writel(__val__, __offs__) \
-	__raw_writel((__val__), titan_addr(__offs__))
-
-/* Protect access to shared TITAN registers */
-extern spinlock_t titan_lock;
-extern int titan_irqflags;
-#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags)
-#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags)
-
-#endif	/* !defined(_ASM_RM9K_OCD_H) */

arch/mips/include/asm/syscall.h

@@ -133,6 +133,8 @@ static inline int syscall_get_arch(void)
 #ifdef CONFIG_64BIT
 	if (!test_thread_flag(TIF_32BIT_REGS))
 		arch |= __AUDIT_ARCH_64BIT;
+	if (test_thread_flag(TIF_32BIT_ADDR))
+		arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
 #endif
 #if defined(__LITTLE_ENDIAN)
 	arch |=  __AUDIT_ARCH_LE;

arch/mips/include/uapi/asm/unistd.h

@@ -371,11 +371,12 @@
 #define __NR_finit_module		(__NR_Linux + 348)
 #define __NR_sched_setattr		(__NR_Linux + 349)
 #define __NR_sched_getattr		(__NR_Linux + 350)
+#define __NR_renameat2			(__NR_Linux + 351)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		350
+#define __NR_Linux_syscalls		351
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
@@ -699,11 +700,12 @@
 #define __NR_getdents64			(__NR_Linux + 308)
 #define __NR_sched_setattr		(__NR_Linux + 309)
 #define __NR_sched_getattr		(__NR_Linux + 310)
+#define __NR_renameat2			(__NR_Linux + 311)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		310
+#define __NR_Linux_syscalls		311
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
@@ -1031,11 +1033,12 @@
 #define __NR_finit_module		(__NR_Linux + 312)
 #define __NR_sched_setattr		(__NR_Linux + 313)
 #define __NR_sched_getattr		(__NR_Linux + 314)
+#define __NR_renameat2			(__NR_Linux + 315)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		314
+#define __NR_Linux_syscalls		315
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 

arch/mips/kernel/proc.c

@@ -124,14 +124,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "kscratch registers\t: %d\n",
 		      hweight8(cpu_data[n].kscratch_mask));
 	seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
-	if (cpu_has_mipsmt) {
-		seq_printf(m, "VPE\t\t\t: %d\n", cpu_data[n].vpe_id);
-#if defined(CONFIG_MIPS_MT_SMTC)
-		seq_printf(m, "TC\t\t\t: %d\n", cpu_data[n].tc_id);
-#endif
-	}
-#endif
+
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 		      cpu_has_vce ? "%u" : "not available");
 	seq_printf(m, fmt, 'D', vced_count);

arch/mips/kernel/scall32-o32.S

@@ -577,3 +577,4 @@ EXPORT(sys_call_table)
 	PTR	sys_finit_module
 	PTR	sys_sched_setattr
 	PTR	sys_sched_getattr		/* 4350 */
+	PTR	sys_renameat2

arch/mips/kernel/scall64-64.S

@@ -430,4 +430,5 @@ EXPORT(sys_call_table)
 	PTR	sys_getdents64
 	PTR	sys_sched_setattr
 	PTR	sys_sched_getattr		/* 5310 */
+	PTR	sys_renameat2
 	.size	sys_call_table,.-sys_call_table

arch/mips/kernel/scall64-n32.S

@@ -423,4 +423,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_finit_module
 	PTR	sys_sched_setattr
 	PTR	sys_sched_getattr
+	PTR	sys_renameat2			/* 6315 */
 	.size	sysn32_call_table,.-sysn32_call_table

arch/mips/kernel/scall64-o32.S

@@ -556,4 +556,5 @@ EXPORT(sys32_call_table)
 	PTR	sys_finit_module
 	PTR	sys_sched_setattr
 	PTR	sys_sched_getattr		/* 4350 */
+	PTR	sys_renameat2
 	.size	sys32_call_table,.-sys32_call_table

arch/mips/lantiq/dts/easy50712.dts

@@ -8,6 +8,7 @@ chosen {
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 

arch/mips/lib/csum_partial.S

@@ -56,14 +56,20 @@
 #define UNIT(unit)  ((unit)*NBYTES)
 
 #define ADDC(sum,reg)						\
+	.set	push;						\
+	.set	noat;						\
 	ADD	sum, reg;					\
 	sltu	v1, sum, reg;					\
 	ADD	sum, v1;					\
+	.set	pop
 
 #define ADDC32(sum,reg)						\
+	.set	push;						\
+	.set	noat;						\
 	addu	sum, reg;					\
 	sltu	v1, sum, reg;					\
 	addu	sum, v1;					\
+	.set	pop
 
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
@@ -710,6 +716,8 @@ LEAF(csum_partial)
 	ADDC(sum, t2)
 .Ldone\@:
 	/* fold checksum */
+	.set	push
+	.set	noat
 #ifdef USE_DOUBLE
 	dsll32	v1, sum, 0
 	daddu	sum, v1
@@ -732,6 +740,7 @@ LEAF(csum_partial)
 	or	sum, sum, t0
 1:
 #endif
+	.set	pop
 	.set reorder
 	ADDC32(sum, psum)
 	jr	ra

arch/mips/lib/delay.c

@@ -6,7 +6,7 @@
  * Copyright (C) 1994 by Waldorf Electronics
  * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 2007  Maciej W. Rozycki
+ * Copyright (C) 2007, 2014 Maciej W. Rozycki
  */
 #include <linux/module.h>
 #include <linux/param.h>
@@ -15,6 +15,12 @@
 #include <asm/compiler.h>
 #include <asm/war.h>
 
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+#define GCC_DADDI_IMM_ASM() "I"
+#else
+#define GCC_DADDI_IMM_ASM() "r"
+#endif
+
 void __delay(unsigned long loops)
 {
 	__asm__ __volatile__ (
@@ -22,13 +28,13 @@ void __delay(unsigned long loops)
 	"	.align	3					\n"
 	"1:	bnez	%0, 1b					\n"
 #if BITS_PER_LONG == 32
-	"	subu	%0, 1					\n"
+	"	subu	%0, %1					\n"
 #else
-	"	dsubu	%0, 1					\n"
+	"	dsubu	%0, %1					\n"
 #endif
 	"	.set	reorder					\n"
 	: "=r" (loops)
-	: "0" (loops));
+	: GCC_DADDI_IMM_ASM() (1), "0" (loops));
 }
 EXPORT_SYMBOL(__delay);
 

arch/mips/lib/strncpy_user.S

@@ -35,7 +35,6 @@ LEAF(__strncpy_from_\func\()_asm)
 	bnez		v0, .Lfault\@
 
 FEXPORT(__strncpy_from_\func\()_nocheck_asm)
-	.set		noreorder
 	move		t0, zero
 	move		v1, a1
 .ifeqs "\func","kernel"
@@ -45,21 +44,21 @@ FEXPORT(__strncpy_from_\func\()_nocheck_asm)
 .endif
 	PTR_ADDIU	v1, 1
 	R10KCBARRIER(0(ra))
+	sb		v0, (a0)
 	beqz		v0, 2f
-	 sb		v0, (a0)
 	PTR_ADDIU	t0, 1
+	PTR_ADDIU	a0, 1
 	bne		t0, a2, 1b
-	 PTR_ADDIU	a0, 1
 2:	PTR_ADDU	v0, a1, t0
 	xor		v0, a1
 	bltz		v0, .Lfault\@
-	 nop
+	move		v0, t0
 	jr		ra			# return n
-	 move		v0, t0
 	END(__strncpy_from_\func\()_asm)
 
-.Lfault\@: jr		ra
-	  li		v0, -EFAULT
+.Lfault\@:
+	li		v0, -EFAULT
+	jr		ra
 
 	.section	__ex_table,"a"
 	PTR		1b, .Lfault\@

arch/mips/loongson/Kconfig

@@ -64,7 +64,6 @@ config LEMOTE_MACH3A
 	bool "Lemote Loongson 3A family machines"
 	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select CSRC_R4K

arch/mips/loongson/lemote-2f/clock.c

@@ -91,6 +91,7 @@ EXPORT_SYMBOL(clk_put);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned int rate_khz = rate / 1000;
 	int ret = 0;
 	int regval;
 	int i;
@@ -111,10 +112,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 		if (loongson2_clockmod_table[i].frequency ==
 		    CPUFREQ_ENTRY_INVALID)
 			continue;
-		if (rate == loongson2_clockmod_table[i].frequency)
+		if (rate_khz == loongson2_clockmod_table[i].frequency)
 			break;
 	}
-	if (rate != loongson2_clockmod_table[i].frequency)
+	if (rate_khz != loongson2_clockmod_table[i].frequency)
 		return -ENOTSUPP;
 
 	clk->rate = rate;

arch/mips/mm/tlb-funcs.S

@@ -16,8 +16,10 @@
 
 #define FASTPATH_SIZE	128
 
+EXPORT(tlbmiss_handler_setup_pgd_start)
 LEAF(tlbmiss_handler_setup_pgd)
-	.space		16 * 4
+1:	j	1b		/* Dummy, will be replaced. */
+	.space	64
 END(tlbmiss_handler_setup_pgd)
 EXPORT(tlbmiss_handler_setup_pgd_end)
 

arch/mips/mm/tlbex.c

@@ -1422,16 +1422,17 @@ static void build_r4000_tlb_refill_handler(void)
 extern u32 handle_tlbl[], handle_tlbl_end[];
 extern u32 handle_tlbs[], handle_tlbs_end[];
 extern u32 handle_tlbm[], handle_tlbm_end[];
-extern u32 tlbmiss_handler_setup_pgd[], tlbmiss_handler_setup_pgd_end[];
+extern u32 tlbmiss_handler_setup_pgd_start[], tlbmiss_handler_setup_pgd[];
+extern u32 tlbmiss_handler_setup_pgd_end[];
 
 static void build_setup_pgd(void)
 {
 	const int a0 = 4;
 	const int __maybe_unused a1 = 5;
 	const int __maybe_unused a2 = 6;
-	u32 *p = tlbmiss_handler_setup_pgd;
+	u32 *p = tlbmiss_handler_setup_pgd_start;
 	const int tlbmiss_handler_setup_pgd_size =
-		tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd;
+		tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd_start;
 #ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 	long pgdc = (long)pgd_current;
 #endif

arch/mips/ralink/dts/mt7620a_eval.dts

@@ -7,6 +7,7 @@ / {
 	model = "Ralink MT7620A evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 

arch/mips/ralink/dts/rt2880_eval.dts

@@ -7,6 +7,7 @@ / {
 	model = "Ralink RT2880 evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x8000000 0x2000000>;
 	};
 

arch/mips/ralink/dts/rt3052_eval.dts

@@ -7,6 +7,7 @@ / {
 	model = "Ralink RT3052 evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 

arch/mips/ralink/dts/rt3883_eval.dts

@@ -7,6 +7,7 @@ / {
 	model = "Ralink RT3883 evaluation board";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x2000000>;
 	};
 

arch/parisc/Kconfig

@@ -22,6 +22,7 @@ config PARISC
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select SYSCTL_ARCH_UNALIGN_ALLOW
+	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_MOD_ARCH_SPECIFIC
 	select VIRT_TO_BUS
 	select MODULES_USE_ELF_RELA

arch/parisc/include/asm/processor.h

@@ -55,6 +55,11 @@
 #define STACK_TOP	TASK_SIZE
 #define STACK_TOP_MAX	DEFAULT_TASK_SIZE
 
+/* Allow bigger stacks for 64-bit processes */
+#define STACK_SIZE_MAX	(USER_WIDE_MODE					\
+			 ? (1 << 30)	/* 1 GB */			\
+			 : (CONFIG_MAX_STACK_SIZE_MB*1024*1024))
+
 #endif
 
 #ifndef __ASSEMBLY__

arch/parisc/include/uapi/asm/unistd.h

@@ -829,8 +829,9 @@
 #define __NR_sched_setattr	(__NR_Linux + 334)
 #define __NR_sched_getattr	(__NR_Linux + 335)
 #define __NR_utimes		(__NR_Linux + 336)
+#define __NR_renameat2		(__NR_Linux + 337)
 
-#define __NR_Linux_syscalls	(__NR_utimes + 1)
+#define __NR_Linux_syscalls	(__NR_renameat2 + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/sys_parisc.c

@@ -72,10 +72,10 @@ static unsigned long mmap_upper_limit(void)
 {
 	unsigned long stack_base;
 
-	/* Limit stack size to 1GB - see setup_arg_pages() in fs/exec.c */
+	/* Limit stack size - see setup_arg_pages() in fs/exec.c */
 	stack_base = rlimit_max(RLIMIT_STACK);
-	if (stack_base > (1 << 30))
-		stack_base = 1 << 30;
+	if (stack_base > STACK_SIZE_MAX)
+		stack_base = STACK_SIZE_MAX;
 
 	return PAGE_ALIGN(STACK_TOP - stack_base);
 }

arch/parisc/kernel/syscall.S

@@ -589,10 +589,13 @@ cas_nocontend:
 # endif
 /* ENABLE_LWS_DEBUG */
 
+	rsm	PSW_SM_I, %r0				/* Disable interrupts */
+	/* COW breaks can cause contention on UP systems */
 	LDCW	0(%sr2,%r20), %r28			/* Try to acquire the lock */
 	cmpb,<>,n	%r0, %r28, cas_action		/* Did we get it? */
 cas_wouldblock:
 	ldo	2(%r0), %r28				/* 2nd case */
+	ssm	PSW_SM_I, %r0
 	b	lws_exit				/* Contended... */
 	ldo	-EAGAIN(%r0), %r21			/* Spin in userspace */
 
@@ -619,15 +622,17 @@ cas_action:
 	stw	%r1, 4(%sr2,%r20)
 #endif
 	/* The load and store could fail */
-1:	ldw	0(%sr3,%r26), %r28
+1:	ldw,ma	0(%sr3,%r26), %r28
 	sub,<>	%r28, %r25, %r0
-2:	stw	%r24, 0(%sr3,%r26)
+2:	stw,ma	%r24, 0(%sr3,%r26)
 	/* Free lock */
-	stw	%r20, 0(%sr2,%r20)
+	stw,ma	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
 	/* Clear thread register indicator */
 	stw	%r0, 4(%sr2,%r20)
 #endif
+	/* Enable interrupts */
+	ssm	PSW_SM_I, %r0
 	/* Return to userspace, set no error */
 	b	lws_exit
 	copy	%r0, %r21
@@ -639,6 +644,7 @@ cas_action:
 #if ENABLE_LWS_DEBUG
 	stw	%r0, 4(%sr2,%r20)
 #endif
+	ssm	PSW_SM_I, %r0
 	b	lws_exit
 	ldo	-EFAULT(%r0),%r21	/* set errno */
 	nop

arch/parisc/kernel/syscall_table.S

@@ -432,6 +432,7 @@
 	ENTRY_SAME(sched_setattr)
 	ENTRY_SAME(sched_getattr)	/* 335 */
 	ENTRY_COMP(utimes)
+	ENTRY_COMP(renameat2)
 
 	/* Nothing yet */
 

arch/parisc/kernel/traps.c

@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/console.h>
 #include <linux/bug.h>
+#include <linux/ratelimit.h>
 
 #include <asm/assembly.h>
 #include <asm/uaccess.h>
@@ -42,9 +43,6 @@
 
 #include "../math-emu/math-emu.h"	/* for handle_fpe() */
 
-#define PRINT_USER_FAULTS /* (turn this on if you want user faults to be */
-			  /*  dumped to the console via printk)          */
-
 #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
 DEFINE_SPINLOCK(pa_dbit_lock);
 #endif
@@ -160,6 +158,17 @@ void show_regs(struct pt_regs *regs)
 	}
 }
 
+static DEFINE_RATELIMIT_STATE(_hppa_rs,
+	DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);
+
+#define parisc_printk_ratelimited(critical, regs, fmt, ...)	{	      \
+	if ((critical || show_unhandled_signals) && __ratelimit(&_hppa_rs)) { \
+		printk(fmt, ##__VA_ARGS__);				      \
+		show_regs(regs);					      \
+	}								      \
+}
+
+
 static void do_show_stack(struct unwind_frame_info *info)
 {
 	int i = 1;
@@ -229,12 +238,10 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 		if (err == 0)
 			return; /* STFU */
 
-		printk(KERN_CRIT "%s (pid %d): %s (code %ld) at " RFMT "\n",
+		parisc_printk_ratelimited(1, regs,
+			KERN_CRIT "%s (pid %d): %s (code %ld) at " RFMT "\n",
 			current->comm, task_pid_nr(current), str, err, regs->iaoq[0]);
-#ifdef PRINT_USER_FAULTS
-		/* XXX for debugging only */
-		show_regs(regs);
-#endif
+
 		return;
 	}
 
@@ -321,14 +328,11 @@ static void handle_break(struct pt_regs *regs)
 			(tt == BUG_TRAP_TYPE_NONE) ? 9 : 0);
 	}
 
-#ifdef PRINT_USER_FAULTS
-	if (unlikely(iir != GDB_BREAK_INSN)) {
-		printk(KERN_DEBUG "break %d,%d: pid=%d command='%s'\n",
+	if (unlikely(iir != GDB_BREAK_INSN))
+		parisc_printk_ratelimited(0, regs,
+			KERN_DEBUG "break %d,%d: pid=%d command='%s'\n",
 			iir & 31, (iir>>13) & ((1<<13)-1),
 			task_pid_nr(current), current->comm);
-		show_regs(regs);
-	}
-#endif
 
 	/* send standard GDB signal */
 	handle_gdb_break(regs, TRAP_BRKPT);
@@ -758,11 +762,9 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 
 	default:
 		if (user_mode(regs)) {
-#ifdef PRINT_USER_FAULTS
-			printk(KERN_DEBUG "\nhandle_interruption() pid=%d command='%s'\n",
-			    task_pid_nr(current), current->comm);
-			show_regs(regs);
-#endif
+			parisc_printk_ratelimited(0, regs, KERN_DEBUG
+				"handle_interruption() pid=%d command='%s'\n",
+				task_pid_nr(current), current->comm);
 			/* SIGBUS, for lack of a better one. */
 			si.si_signo = SIGBUS;
 			si.si_code = BUS_OBJERR;
@@ -779,16 +781,10 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 
 	if (user_mode(regs)) {
 	    if ((fault_space >> SPACEID_SHIFT) != (regs->sr[7] >> SPACEID_SHIFT)) {
-#ifdef PRINT_USER_FAULTS
-		if (fault_space == 0)
-			printk(KERN_DEBUG "User Fault on Kernel Space ");
-		else
-			printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
-			       code);
-		printk(KERN_CONT "pid=%d command='%s'\n",
-		       task_pid_nr(current), current->comm);
-		show_regs(regs);
-#endif
+		parisc_printk_ratelimited(0, regs, KERN_DEBUG
+				"User fault %d on space 0x%08lx, pid=%d command='%s'\n",
+				code, fault_space,
+				task_pid_nr(current), current->comm);
 		si.si_signo = SIGSEGV;
 		si.si_errno = 0;
 		si.si_code = SEGV_MAPERR;

arch/parisc/mm/fault.c

@@ -19,10 +19,6 @@
 #include <asm/uaccess.h>
 #include <asm/traps.h>
 
-#define PRINT_USER_FAULTS /* (turn this on if you want user faults to be */
-			 /*  dumped to the console via printk)          */
-
-
 /* Various important other fields */
 #define bit22set(x)		(x & 0x00000200)
 #define bits23_25set(x)		(x & 0x000001c0)
@@ -34,6 +30,8 @@
 
 DEFINE_PER_CPU(struct exception_data, exception_data);
 
+int show_unhandled_signals = 1;
+
 /*
  * parisc_acctyp(unsigned int inst) --
  *    Given a PA-RISC memory access instruction, determine if the
@@ -173,6 +171,32 @@ int fixup_exception(struct pt_regs *regs)
 	return 0;
 }
 
+/*
+ * Print out info about fatal segfaults, if the show_unhandled_signals
+ * sysctl is set:
+ */
+static inline void
+show_signal_msg(struct pt_regs *regs, unsigned long code,
+		unsigned long address, struct task_struct *tsk,
+		struct vm_area_struct *vma)
+{
+	if (!unhandled_signal(tsk, SIGSEGV))
+		return;
+
+	if (!printk_ratelimit())
+		return;
+
+	pr_warn("\n");
+	pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx",
+	    tsk->comm, code, address);
+	print_vma_addr(KERN_CONT " in ", regs->iaoq[0]);
+	if (vma)
+		pr_warn(" vm_start = 0x%08lx, vm_end = 0x%08lx\n",
+				vma->vm_start, vma->vm_end);
+
+	show_regs(regs);
+}
+
 void do_page_fault(struct pt_regs *regs, unsigned long code,
 			      unsigned long address)
 {
@@ -270,16 +294,8 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
 	if (user_mode(regs)) {
 		struct siginfo si;
 
-#ifdef PRINT_USER_FAULTS
-		printk(KERN_DEBUG "\n");
-		printk(KERN_DEBUG "do_page_fault() pid=%d command='%s' type=%lu address=0x%08lx\n",
-		    task_pid_nr(tsk), tsk->comm, code, address);
-		if (vma) {
-			printk(KERN_DEBUG "vm_start = 0x%08lx, vm_end = 0x%08lx\n",
-					vma->vm_start, vma->vm_end);
-		}
-		show_regs(regs);
-#endif
+		show_signal_msg(regs, code, address, tsk, vma);
+
 		switch (code) {
 		case 15:	/* Data TLB miss fault/Data page fault */
 			/* send SIGSEGV when outside of vma */

arch/powerpc/kernel/time.c

@@ -813,9 +813,6 @@ static void __init clocksource_init(void)
 static int decrementer_set_next_event(unsigned long evt,
 				      struct clock_event_device *dev)
 {
-	/* Don't adjust the decrementer if some irq work is pending */
-	if (test_irq_work_pending())
-		return 0;
 	__get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt;
 	set_dec(evt);
 

arch/powerpc/platforms/powernv/eeh-ioda.c

@@ -549,7 +549,8 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
 		ret = ioda_eeh_phb_reset(hose, option);
 	} else {
 		bus = eeh_pe_bus_get(pe);
-		if (pci_is_root_bus(bus))
+		if (pci_is_root_bus(bus) ||
+		    pci_is_root_bus(bus->parent))
 			ret = ioda_eeh_root_reset(hose, option);
 		else
 			ret = ioda_eeh_bridge_reset(hose, bus->self, option);

arch/s390/crypto/aes_s390.c

@@ -820,6 +820,9 @@ static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
 		else
 			memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
 		spin_unlock(&ctrblk_lock);
+	} else {
+		if (!nbytes)
+			memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
 	}
 	/*
 	 * final block may be < AES_BLOCK_SIZE, copy only nbytes

arch/s390/crypto/des_s390.c

@@ -429,6 +429,9 @@ static int ctr_desall_crypt(struct blkcipher_desc *desc, long func,
 		else
 			memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
 		spin_unlock(&ctrblk_lock);
+	} else {
+		if (!nbytes)
+			memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
 	}
 	/* final block may be < DES_BLOCK_SIZE, copy only nbytes */
 	if (nbytes) {

arch/x86/include/asm/hugetlb.h

@@ -52,6 +52,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep)
 {
+	ptep_clear_flush(vma, addr, ptep);
 }
 
 static inline int huge_pte_none(pte_t pte)

arch/x86/kernel/cpu/rdrand.c

@@ -27,6 +27,7 @@
 static int __init x86_rdrand_setup(char *s)
 {
 	setup_clear_cpu_cap(X86_FEATURE_RDRAND);
+	setup_clear_cpu_cap(X86_FEATURE_RDSEED);
 	return 1;
 }
 __setup("nordrand", x86_rdrand_setup);